Sy-lsind / sy-listi and sy-lsind = 0

First of all I would like to know the difference between sy-lsind and sy-listi.
Below is one code snippet wherein my requirement is that when I click on list number 5 it should take me to basic list.
But when I click on list number 5, it takes me to list number 1.
How should I go about this to come from top level list to basic one again ?
REPORT Test.
AT LINE-SELECTION.
WRITE : 'Current Index', sy-lsind.
WRITE : 'Current List',sy-listi.
IF sy-lsind = 5.
sy-lsind = 0.
ENDIF.
START-OF-SELECTION.
Write : 'This is Basic List'.
WRITE : 'Current Index', sy-lsind.
WRITE : 'Current List', sy-listi.

Hi Nitin,
Sy-lsind = Index of the list being created.
sy-listi = Index of the list from which an event was fired.
Look at the code below :
START-OF-SELECTION.
Write : 'This is Basic List'.
WRITE : 'Current Index', sy-lsind.
WRITE : 'Current List', sy-listi.
AT LINE-SELECTION.
IF sy-listi = 5.
sy-lsind = 0.
else.
WRITE : 'Current Index', sy-lsind.
WRITE : 'Current List',sy-listi.
ENDIF.
So, if you want to go to basic list after clicking on list number 5, you will have to use sy-listi in your condition.
I have added an additional else part in my code. This will make it easier to understand.
Regards
Mitesh

Similar Messages

What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

There are no updates to either OS 10.5.8 or Safari 5.0.6.
If you need a later version of Safari you must first upgrade your operating system to a later version of OS X.

What is difference between SharePoint List and Libraries

What is difference between SharePoint List and Libraries

Hello,
You also might want to loot at here:
http://veroniquepalmer.com/2013/02/24/the-difference-between-sharepoint-2010-lists-libraries-and-pages/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1d4152cd-92a6-4eed-9a52-a519ec71c674/what-is-the-difference-between-document-library-and-list-in-sharepoint
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

What is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

what is difference between distribution list and share point group? Can we add distribution list into person and group column of share point list?

there is a workaround you can try, create audience and add DL to them and deal with the audience or convert DL to groups
https://social.technet.microsoft.com/Forums/en-US/02f0d773-8188-4d94-a448-0c04d838b0cf/distribution-lists-in-sharepoint?forum=sharepointgenerallegacy
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Display data in list and combo box

hi all....
how to display data from database in list and combo box? i use MYSQL...
help me please..... tq...

1 - Write a query to retrieve the data you want from database
2 - In a servlet, connect to database, Run the query, scroll through the result set and put the data into a list of Java Objects.
3 - Set a request/session attribute of that list of objects
4 - Forward to JSP
5 - In JSP, create a <select> box, and then use a <c:forEach> loop to generate <option> tags from the list.

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to get distinct values from a list and display in a ListView webpart.

Hi,
I have a requirement in which I need to pull unique/distinct values from a custom list and then display it via a listview webpart. Can any one suggest how this can be done.
If possible please share the CAMEL query to fetch distinct values from a custom list.
Thanks,
Ankit

Hi Ankit,
Is there any particular reason that the values need to be shown in a list view web part? Are you going to use that web part for filtering via web part connections?
I ask because the enterprise site collection features include the SharePoint List Filter web part, which may accomplish what you're looking for.
If you just need to display the values in a grid view, you might have more luck with the JavaScript Client Object Model. Try putting the following in a text file:
<style>
.CustomTableClass{display:table;table-layout:fixed}
.CustomRowClass{display:table-row;}
</style>
<div id="distinct_values_div" class="CustomTableClass">
<img src="/_layouts/loading.gif" />
</div>
<script language="JavaScript" type="text/JavaScript">
var siteUrl = '/sitecollection/web'; //use the actual subsite URL here
var listName = 'mylist'; // use the actual list name here
var field = "Title" // use the actual field you want to display here
var divToUpdate = document.getElementById("distinct_values_div");
var rowClass = "CustomRowClass";
ExecuteOrDelayUntilScriptLoaded(function(){
var clientContext = new SP.ClientContext(siteUrl);
var web = clientContext.get_web();
var lists = web.get_lists();
var list = lists.getByTitle(listName);
var camlQuery = new SP.CamlQuery();
camlQuery.set_viewXml('<View><Query></Query><RowLimit>500</RowLimit></View>');
this.collListItem = list.getItems(camlQuery);
clientContext.load(collListItem,"Include ("+field+")");
clientContext.executeQueryAsync(
Function.createDelegate(this, this.onQuerySucceeded),
Function.createDelegate(this, this.onQueryFailed));
},"sp.js");
function onQueryFailed(sender, args){
divToUpdate.innerHTML = 'Unable to retrieve values: '+args.get_message());
function onQuerySucceeded(sender, args){
var allValues = [];
var listItemEnumerator = collListItem.getEnumerator();
divToUpdate.innerHTML = "";
while(listItemEnumerator.moveNext()){
var listItem = listItemEnumerator.get_current();
if(!containsString(allValues,listItem.get_item(field)){
var value = listItem.get_item(field);
allValues.push(value);
var newDiv = document.createElement("div");
newDiv.className = rowClass;
newDiv.innerHTML = value;
divToUpdate.appendChild(newDiv);
function containsString(strArray, text){
var contains = false;
for (var i=0; i<strArray.length; i++){
if(strArray[i]==text){contains = true; break;}
return contains;
</script>
Upload the text file to a library on the site, then add a content editor web part to a page where you want the distinct values to appear. In the content editor web part's properties, edit the Content Link so that it links directly to the text file. This
will cause the JavaScript to run on the page.

Adding button in the secondary list and alv grid

Hi all ,
            i have devloped an alv grid interactive report as below, my problem is i want to add some button in the secondary list and do some interactions. but i dont know how to do that. i m sending u my code below ,,, plzz suggest what can be done do add that.
<code>
*& Report Z_demo_SALESDOC
REPORT z_demo_salesdoc.
TABLES: vbak, vbap.
TYPE-POOLS:slis.
DATA: BEGIN OF it_vbak OCCURS 0,
       vbeln TYPE vbak-vbeln,
       ernam TYPE vbak-ernam,
       erdat TYPE vbak-erdat,
       auart TYPE vbak-auart,
       END OF it_vbak.
DATA: BEGIN OF it_vbap OCCURS 0,
       vbeln TYPE vbap-vbeln,
       posnr TYPE vbap-vbeln,
       matnr TYPE vbap-matnr,
       zmeng TYPE vbap-zmeng,
       netwr TYPE vbap-netwr,
       END OF it_vbap.
DATA:it_event TYPE slis_t_event.
DATA: t_field TYPE slis_t_fieldcat_alv,
      w_field TYPE slis_fieldcat_alv,
      t_field1 TYPE slis_t_fieldcat_alv,
      w_field1 TYPE slis_fieldcat_alv,
      w_layout TYPE slis_layout_alv,
      t_sort TYPE slis_t_sortinfo_alv,
      w_sort TYPE slis_sortinfo_alv.
CONSTANTS: c_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
           c_usercommand TYPE slis_formname VALUE 'USER_COMMAND'.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln MODIF ID m1,
                s_erdat FOR vbak-erdat MODIF ID m2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
PARAMETERS:rb1 RADIOBUTTON GROUP g1 USER-COMMAND us1,
           rb2 RADIOBUTTON GROUP g1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN OUTPUT.
IF rb1 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1    = 'M1'.
     IF screen-name    CS 'S_VBELN'.
        screen-active    = '0'.
       screen-input     = '0'.
      screen-output    = '0'.
      screen-invisible = '1'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
IF rb2 = 'X'.
    LOOP AT SCREEN.
      IF screen-group1    = 'M2'.
        screen-active    = '0'.
       screen-input     = '0'.
      screen-output    = '0'.
      screen-invisible = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN.
DATA: v_vbeln LIKE vbak-vbeln.
SELECT SINGLE vbeln
                  FROM vbak
                  INTO (v_vbeln)
                  WHERE vbeln IN s_vbeln .
IF sy-subrc <> 0.
    MESSAGE e001(q) WITH 'Invalid Sales document'.
ENDIF.
DATA: v_erdat LIKE vbak-erdat.
SELECT SINGLE erdat
                  FROM vbak
                  INTO (v_erdat)
                  WHERE erdat IN s_erdat.
IF sy-subrc <> 0.
    MESSAGE e001(q) WITH 'No document available with given date'.
ENDIF.
START-OF-SELECTION.
PERFORM get_data_vbak.
PERFORM build_field_catalog.
PERFORM fill_event.
PERFORM print_data_vbak.
END-OF-SELECTION.
*&      Form get_data_vbak
      text
--> p1        text
<-- p2        text
FORM get_data_vbak .
SELECT vbeln ernam erdat auart
                            FROM vbak
                            INTO TABLE it_vbak
                            WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
ENDFORM.                    " get_data_vbak
*&      Form build_field_catalog
      text
--> p1        text
<-- p2        text
FORM build_field_catalog .
w_field-col_pos = 1.
w_field-fieldname = 'VBELN'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Sales Order'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 2.
w_field-fieldname = 'ERNAM'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Created by'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 3.
w_field-fieldname = 'ERDAT'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Created Date'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_field-col_pos = 4.
w_field-fieldname = 'AUART'.
w_field-tabname = 'IT_VBAK'.
w_field-seltext_m = 'Order type'.
w_field-emphasize = 'C710'.
APPEND w_field TO t_field.
CLEAR w_field.
w_sort-spos = 1.
w_sort-fieldname = 'VBELN'.
w_sort-up = 'X'.
APPEND w_sort TO t_sort.
w_layout-colwidth_optimize = 'X'.
ENDFORM.                    " build_field_catalog
*&      Form user_command
      text
     -->RF_UCOMM     text
     -->RS_SELFIELD text
FORM user_command USING rf_ucomm    TYPE sy-ucomm
                        rs_selfield TYPE slis_selfield.
CASE rf_ucomm.
    WHEN '&IC1'.
      IF rs_selfield-fieldname = 'VBELN'.
        READ TABLE it_vbak INDEX rs_selfield-tabindex.
        IF sy-subrc = 0.
          PERFORM get_data_vbap.
          PERFORM build_field_catalog2.
          PERFORM print_field_data.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form print_data_vbak
      text
--> p1        text
<-- p2        text
FORM print_data_vbak .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
   i_callback_user_command           = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  = I_STRUCTURE_NAME
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      = I_GRID_TITLE
I_GRID_SETTINGS                   = I_GRID_SETTINGS
     is_layout                         = w_layout
   it_fieldcat                       = t_field[]
IT_EXCLUDING                      = IT_EXCLUDING
IT_SPECIAL_GROUPS                 = IT_SPECIAL_GROUPS
   it_sort                           = t_sort
IT_FILTER                         = IT_FILTER
IS_SEL_HIDE                       = IS_SEL_HIDE
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        = IS_VARIANT
it_events                         = it_event[]
IT_EVENT_EXIT                     = IT_EVENT_EXIT
IS_PRINT                          = IS_PRINT
IS_REPREP_ID                      = IS_REPREP_ID
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   = IT_ALV_GRAPHICS
IT_HYPERLINK                      = IT_HYPERLINK
IT_ADD_FIELDCAT                   = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO                   = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER        = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER           = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER            = ES_EXIT_CAUSED_BY_USER
    TABLES
      t_outtab                          = it_vbak
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " print_data_vbak
*&      Form fill_event
      text
FORM fill_event .
DATA : st_event TYPE slis_alv_event.
*- Clear.
CLEAR : st_event, it_event[].
*- Local variable
DATA : l_tabix TYPE sy-tabix.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_event
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- Read event table
READ TABLE it_event WITH KEY name = slis_ev_user_command
                       INTO st_event.
*- Clear
CLEAR l_tabix.
l_tabix = sy-tabix.
*- Check subrc
IF sy-subrc = 0.
    st_event-form = c_usercommand.
*- Modify
    MODIFY it_event FROM st_event INDEX l_tabix.
*- Clear
    CLEAR st_event.
ENDIF.
ENDFORM.                    " fill_event
*&      Form get_data_vbap
      text
FORM get_data_vbap .
IF NOT it_vbak[] IS INITIAL.
    SELECT vbeln
           posnr
           matnr
           zmeng
           netwr
        FROM vbap
        INTO TABLE it_vbap
        WHERE vbeln = it_vbak-vbeln.
    IF sy-subrc = 0.
      SORT it_vbap BY vbeln.
    ENDIF.
ENDIF.
ENDFORM.                    " get_data_vbap
*&      Form build_field_catalog2
      text
FORM build_field_catalog2 .
CLEAR:t_field1,w_field1.
w_field1-col_pos = 1.
w_field1-fieldname = 'VBELN'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Sales Order'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 2.
w_field1-fieldname = 'POSNR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Sales Doc Item'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 3.
w_field1-fieldname = 'MATNR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Material No'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 4.
w_field1-fieldname = 'ZMENG'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Target quan units'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
w_field1-col_pos = 5.
w_field1-fieldname = 'NETWR'.
w_field1-tabname = 'IT_VBAP'.
w_field1-seltext_m = 'Net value dc cu'.
w_field1-emphasize = 'C710'.
APPEND w_field1 TO t_field1.
CLEAR w_field1.
ENDFORM.                    " build_field_catalog2
*&      Form print_field_data
      text
FORM print_field_data .
SET PF-STATUS 'VBAP'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  = I_STRUCTURE_NAME
I_BACKGROUND_ID                   = ' '
     i_grid_title                      = 'VBAP DETAILS'
I_GRID_SETTINGS                   = I_GRID_SETTINGS
IS_LAYOUT                         = IS_LAYOUT
     it_fieldcat                       = t_field1[]
IT_EXCLUDING                      = IT_EXCLUDING
IT_SPECIAL_GROUPS                 = IT_SPECIAL_GROUPS
IT_SORT                           = IT_SORT
IT_FILTER                         = IT_FILTER
IS_SEL_HIDE                       = IS_SEL_HIDE
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        = IS_VARIANT
IT_EVENTS                         = IT_EVENTS
IT_EVENT_EXIT                     = IT_EVENT_EXIT
IS_PRINT                          = IS_PRINT
IS_REPREP_ID                      = IS_REPREP_ID
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   = IT_ALV_GRAPHICS
IT_HYPERLINK                      = IT_HYPERLINK
IT_ADD_FIELDCAT                   = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO                   = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER        = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER           = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER            = ES_EXIT_CAUSED_BY_USER
    TABLES
      t_outtab                          = it_vbap
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " print_field_data
</code>

Hi Satya..
This is the Sample code...
DATA : V_FORM_GUI TYPE SLIS_FORMNAME VALUE 'F_GUI'. "Form name
**Secondary List
FORM print_field_data .
SET PF-STATUS 'VBAP'. "This statement will not work for ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
<b> I_CALLBACK_PF_STATUS_SET = V_FORM_GUI
                                                  "Subroutine in which GUI status is called</b>
I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'   "To handle GUI
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = I_STRUCTURE_NAME
I_BACKGROUND_ID = ' '
i_grid_title = 'VBAP DETAILS'
I_GRID_SETTINGS = I_GRID_SETTINGS
IS_LAYOUT = IS_LAYOUT
it_fieldcat = t_field1[]
IT_EXCLUDING = IT_EXCLUDING
IT_SPECIAL_GROUPS = IT_SPECIAL_GROUPS
IT_SORT = IT_SORT
IT_FILTER = IT_FILTER
IS_SEL_HIDE = IS_SEL_HIDE
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = IS_VARIANT
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT = IT_EVENT_EXIT
IS_PRINT = IS_PRINT
IS_REPREP_ID = IS_REPREP_ID
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS = IT_ALV_GRAPHICS
IT_HYPERLINK = IT_HYPERLINK
IT_ADD_FIELDCAT = IT_ADD_FIELDCAT
IT_EXCEPT_QINFO = IT_EXCEPT_QINFO
IR_SALV_FULLSCREEN_ADAPTER = IR_SALV_FULLSCREEN_ADAPTER
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
TABLES
t_outtab = it_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_field_data
FORM F_GUI USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'GUI_1'. "Double click and Create this GUI status and add buttons
ENDFORM.
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Whats the difference between list and lov ?

Whats the difference between list and lov ?
i can do the same things with a list what an lov can do .
infact a list is more better. cause the list doesnt hold/show a range of values, and only has the items value iteself.
while the lov can get all the values of items depending on the query.
like
select ename, job, sal from emp
will show all the three items values in lov?

Also, if you're looking in the US store, the prices are:
- Airport Express (small, no ac) $99 - Has audio out for speaker connection using Airplay. Can share a USB printer only.
- Airport Extreme (larger, ac) $199 - No audio out, can share a USB printer or hard drive.
- Time Capsules (2TB, 3TB at $299, $399) - have ac wireless and a backup hard drive for Time Machine which the other Airports do not have.
Matt

Open Interface for Approved Supplier Lists and Sourcing Rules

Hi All,
Is there an open interface or an API available for Appeoved Supplier Lists and Sourcing Rules.
Thanks and Regards,
MPH

Hi sandeep,
I prefer to use the API mentioned.
However this is in Oracle Manufactirung and we dont use that module instead I want to define them in Oracle Purchasing.
can I still do it in Purchasing using the same API.
Further as per the document there are 3 entities
01) Sourcing Rule/Bill of Distribution
02) Receiving Organization
03) Shipping Organization
Do I need to define all 3 in order to make it work?
Thanks and Regards,
MPH

Report with select list and link to call another report

Hi,
I am trying to do 2 reports (REPORT1 and REPORT2).
The first is a summary report (REPORT1).
This report will display sales figures for the year. Now, I need to have a select list in the result set that will have 2 options, depending on which option is chosen, I want to call REPORT2 with the select list as a parameter. How can I do this ?
Let me try to explain what I did.
I created REPORT1 on Page 100
SELECT YEAR, sum(YTD_SALES), APEX_ITEM.SELECT_LIST(1,'DEPARTMENT','Department;DEPARTMENT,Division;DIVISION') Drilldown FROM SALES_ANALYSIS WHERE YEAR > 2000
GROUP BY YEAR ORDER BY YEAR
I created 2 hidden items namely P100_YEAR and P100_DRILLDOWN
I also made the column YEAR as a link and specified both P100_YEAR and P100_DRILLDOWN as parameters to be passed.
Next, I created REPORT2
SELECT YEAR, DECODE(:P100_DRILLDOWN, 'Department', department, 'Division', Division) dept_div, sum(YTD_SALES) ytd_sales
FROM SALES_ANALYSIS
WHERE YEAR = :P100_YEAR
When I run Report 1, it's fine, when I choose either Department or Division from the Select List and click on the link to call Report 2, report 2 is displayed, but the value being passed for P100_DRILLDOWN is not correct and as a result, I am unable to get correct results for Report 2
Am I missing something ? Are there any alternate ways to do what I'm doing ?
Thanks,
Ashok

Hi Ashok,
The link definition will not know the value selected in the list as it is constructed only when the page is being rendered. You would need to create some javascript to handle this. I've done that here: [http://apex.oracle.com/pls/otn/f?p=267:182]
The link on the EMPNO column has been defined in the HTML Expression setting for the column instead of the Link section. The HTML Expression that I have used is:
<a href="#" onclick="javascript:doDrilldown('#EMPNO#',this);">#EMPNO#</a>And, in the page's HTML Header setting, I have added in:
<script type="text/javascript">
function doDrilldown(empno,group)
var g;
var p = group.parentNode;
while (p.tagName != "TR")
p = p.parentNode;
var x = p.getElementsByTagName("SELECT");
if (x.length > 0)
g = x[0].value;
var url = "f?p=&APP_ID.:183:&SESSION.::::P183_EMPNO,P183_GROUP:" + empno + "," + g;
document.location.href = url;
</script>When a link is clicked, the doDrilldown function is called passing in the EMPNO value and the "this" object (which identifies the object triggering the call). The function starts from that object and goes up in the HTML tag tree to the nearest TR tag (the row tag that the link is on) and then finds the first SELECT list item on the row and gets its value. It then constructs a URL using this and the EMPNO value and performs a redirect to the second page (page 183 in this example).
Andy

I just tried to update my iphone 4 to the 5.01. My iphone backed up and started update but now its stuck in recovery mode and will not restore. It gives me an error message of 1, but I have tried everything on troubleshoot list and still wont work!!!!

I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!

http://support.apple.com/kb/TS3694#error1

I accidently click on ''Import the list'' but now all the music have an exclamation point I think they are all in Musique.txt on the desk... How can i take back these music on my library? I tried : Import the list and take Music.txt , but it do not work

I accidently click on ''Import the list'' but now all the music have an exclamation point I think they are all in Musique.txt on the desk... How can i take back these music on my library? I tried : Import the list and take Music.txt , but it do not work

Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

Sy-lsind / sy-listi and sy-lsind = 0

Similar Messages

Maybe you are looking for