Sybase 16.0.00.01 hang during SUM upgrade.

Hi
Yesterday installed fresh SolMan 7.1 on Win 2012 with Sybase ASE Adaptive Server
Enterprise/16.0 GA PL01/EBF 22540 .Kernel 721EXT PL 201 and lib_dbsl
213.
Now performing upgrade to SP11 using SUM SP10PL6
During phase MAIN_NEWBAS/RUN_RSCPFROM_CRR database freeze and i'm unable to login with isql:
I'm observing very high CPU usage ~70% without any disk activity.
The only solution is to restart db service and then db is accessible.
Updated db parameters with latest script from note 1602547 - nothing
helped.
It's my first Sybase ASE installation - so i'm rather green in this db
Opened ticket 499958 / 2014 - if anyone from support want to log into WTS and rerun this step to catch logs i'm ready.
Regards
Marcin

Hi Marcin,
Please check the below SAP notes and perform recommendated steps
1) 1581695 - SYB: Configuration Guide for SAP ASE 16.0
2) 2006403 - Very High CPU Usage with ASE 16.0 on Solaris
Refer to the CR note mentioned under SAP note 2006403.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

Issue in XML during SUM Upgrade

Hello Colleagues,
Background: XML stack file will be used in SUM upgrade. In the past, I have experienced an issue wherein if a new software component is installed in the system after you have generated the stack file, SUM will throw an error as you stack file will no longer be valid.
Question: My question is this, I have generated my stack file today, with current kernel 7.20 64BIT with SP level 402. Come upgrade time 20 days from now, we will first manually upgrade the kernel to 7.20 64BIT SP level of 500. After that, we will do the SUM upgrade with the xml file that I have generated originally. Will there be any conflicts during SUM? Would SUM invalidate and not accept the stack file that I will use as originally, it was generated with a kernel with a start version of 402.
Regards,
Meinard

Hi reagan,
Because in the past, I had experience wherein when a component was changed after the xml file was generated, an error is appearing in configuration phase of SUM. Kindly see attached. Basically, will the stack file have a target version even if i did not select any kernel to be upgraded in mopz? Am i correct that it has only a start version and no target version? Thank you!
Regards,
Meinard

Ipad system hang during itune upgrading

ipad system hang during itune upgrading

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Imac hanging during Lion upgrade

I have a 2010 27" imac. As of last night, it had Snow Leopard on it (as it was shipped with).
I tried upgrading last night with the Lion purchased from the App store.
The system now appears hanging with "approximately 21 minutes left" on the screen. The mouse works. The screen dims after X minutes, and will wake up with mouse movement. No keyboard inputs seem to work.
It has now been 12 hours stuck at the same point.
What's next? Power cycle? Hope for the best? I have plenty of backups, but I'm surprised that a newer system is having this problem but I can't seem to find others who also had it.

I did do the above as I read that may work too, I also made it so the HD never sleeps. Did not help for me, computer still freezes when switching accounts, not all the time, on average every other day I need to do a hard restart.
Still looking for the answer

IPod recognized, but hangs during update

So my iPod will show up in Finder and in iTunes, and automatic updating will begin. However, at random times during the update, sometimes 4 songs in, sometimes 65, the whole process will just hang. iTunes status screen gets stuck on flashing between "Updating iPod..." and Song 65 of 2054 and just flash between those two over and over.
Meanwhile, the iPod screen itself is also stuck and no longer flashing "Do Not Disconnect" -- it's a steady screen with none of the normal flashing.
Tried resetting, doesn't do anything.
Tried restoring, and it hangs after Authenticate asks me for my password to Restore the iPod.
I wind up having to just force disconnect and force quit everything and restart.
Anybody else have this problem? Thanks for any help you can give.
Oh btw, OS 10.3.9, iTunes 4.9, iBook G4.

I am having the same issue where it hangs during update -- seems to always happen around the 1800th song. Here's more specifics:
-I've got 7000 songs in my Library
-my iTunes Music folder is located on an external FireWire HD
My Mac has no problems mounting the iPod. No problems restoring with iPod Updater. No problems with erasing using Disk Utility.
I have tried the following:
1. Resetting and then restoring via iPod Updater.
2. Erasing/reformatting via Disk Utility, including zeroing out all data, and then restoring via iPod Updater.
3. Resetting into Disk Mode.
4. Manually updating songs.
5. Automatcially updating songs.
Nothing works. I have been troubleshooting this for about 8 hours now with no luck. No matter what I do differently, it always hangs around song 1800. I even tried uninstalling/reinstalling iTunes -- and I have tried this with several different user accounts and on different partitions I have set up.
When it "hangs," the iPod itself just makes a the "clicking" sound of a HD. I'm wondering if the HD is just bad -- but it came up with no errors when checking with Disk Utility.
Any more suggestions?
Johnny

Arch Live CD x64 hanging during boot at "triggering uevents"

Hello!
I recently was recommended Arch by a friend, and after I followed the 'Newbies Guide' and burning a live CD to install Arch with, it appears to hang during Live CD boot at "installing uevents."
I am trying to install Arch as a dual boot on a late 2008 MacBook Pro which is currently running x64 Windows 7. I have plenty of HD space (100gb free and 100gb unallocated to install Arch onto).
Here is a picture:
http://i.imgur.com/Y8P41nf.jpg
I get the same error weather I try to install x64 or i686 (I think that's what it's called). Is there any reason for this?
Thank you!
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code --
(Sorry, missed that. My bad!)
Last edited by RalphORama (2013-09-07 03:09:13)

frank604 wrote:
You can try nomodeset. Seems to be a failure in loading a driver for your hardware. To read more on similar issues, there's a few posts with more info and suggestions by googling it.
Google result: http://lmgtfy.com/?q=halt+at+triggering+uevent
Results:
https://bbs.archlinux.org/viewtopic.php?id=151259
https://bbs.archlinux.org/viewtopic.php?id=140426
Thanks! I tried googling it myself but got mostly answers that didn't work. I'll try this!

Disk utility hangs during disk verify

Initially 'disk verify' registered errors on exit - minor error/issue it said,some kind of header problem, so I ran disk utility off the install disk. Now the machine's native version of disk utility hangs during disk verify, blue & white spirals forever.
This coincidentally straight after my gmail/google address/account was hacked a couple of days ago.

Have you tried booting in SafeBoot mode (shift key held on start
until login screen appears) then launch Disk Utility and then run
its 'repair disk permissions' item, selecting the Macintosh HD;
and then note the repair window. It should fix something.
And when Disk Utility is done, quit it, and restart the Mac normally.
{...It is unlikely something from gmail affected your computer unless
you open up unknown sourced emails or go to odd web sites where
something may be downloaded from there, which you would almost
have to install (as admin, etc) for malware to work. You can get and
try ClamXAV for free to see if it sees any malware virus content.}
If you use Gmail, and do not log in using the https:// (secure http)
you should change the habit and bookmark the secure login site.
And when booted from the Installer disk and running Disk Utility
from there, see about running "repair disk" and not verify. The
repair choice will verify; but verify will not repair. Could be if
you cannot use the Utility to Repair the issues, and the other
SafeBoot mode and the computer's Disk Utility to get it working
you may need to further troubleshoot and/or get third-party tools.
In any event...
Good luck & happy computing!

PLEASE HELP ! While updating My Xperia Z1 , my pc hanged during the process and .

While updating My Xperia Z1 , my pc hanged during the process ( so , installation of update was interrupted , guess it's same as getting your USB connection disconnected )and now the phone won't turn on .
Its shows the Sony Xperia logo , then shows a black lit screen , and that's it , nothing else happens . I can only turn it off by pressing and holding the power+up volume button , but it turns on automatically if plugged in for charging or in PC only till it gets that black screen .
I tried to flash it with a flashtool (Emma) , but it says phone locked , but since it can't even be turned on , i can't unlock it .
It's a store bought phone and is not of any contracts with any mobile service provider or anything like that ....
Funny you know ... my PC had to crash at the moment i was updating it .... my luck ....
Anyways , now please can anyone tell me what i can do ? I'm sure there is a way i can fix it using my pc and other downloadable software , so please can some one help me how i can fix this problem ? I don't care if i lose all the data on it , i just want my phone back ....
Solved!
Go to Solution.

Problem Solved ,Thank you very much !!
For those who might face the problem and stumble upon this thread after googling
Read above mentioned comments
Now here's what I did :
Turned the phone off by power+volume key method , then plugged it in to the pc via USB and opened sony pc companion , entered Support zone , then entered the Update device option , then I Unplugged my device , only after doing this a window pops up with Repair my phone/tablet in blue text , then i clicked on that and followed the simple instructions ..
It's basically what Thommo said , only i was so freaked out at that time that i failed to follow his instructions to the letter
So now my phone is back to normal , and , it got the latest lolipop update !
Problem solved i guess but Thommo , i need to disturb you again with just one more question , since at the very beginning , the update process was interrupted , and now i got lolipop after the repair ,without needing to update again , so has the lollipop been installed properly on my phone or do i need to use any other flashtool to re-install lollipop ?
again , Thank you ...

X200 hangs during restart or shut down when connected to ultrabase

My X200 hangs during a Windows restart or shut down when I'm connected to my ultrabase. The laptop appears to go through most of the processes to restart/shut down but eventually hangs at a blue screen with unmoveable cursor (note, not a Windows BSOD). I'm forced to perform a hard shut down to turn off the laptop.
This hang at restart/shut down only occurs when I'm connected to the ultrabase.

Just as a thing to try, and this is assuming that you all have an integrated camera, please try this camera driver and let the board know the results:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70600

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

Sessions/connections gets hang during update and select operations.

A table with 3 million records, which has customer details data.
Everyday application is executing select and update queries on that table.
Sessions/connections gets hang during update and select operations.
After checking ADDM report, following are the findings:
Please suggest the solutions
Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 145.22 active sessions, 99.77% of total activity.
SQL statements were found waiting for row lock waits.
Recommendation 1: Application Analysis
Estimated benefit is 145.22 active sessions, 99.77% of total activity.
Action
Significant row contention was detected in the TABLE
"AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
row contention in the application logic using the given blocked SQL.
Related Object
Database object with ID 82155.
Rationale
The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The session with ID 50 and serial number 34525 in instance number 1 was
the blocking session responsible for 100% of this recommendation's
benefit.
Symptoms That Led to the Finding:
Wait class "Application" was consuming significant database time.
Impact is 145.22 active sessions, 99.77% of total activity.
Finding 2: Top SQL Statements
Impact is 46.39 active sessions, 31.87% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
Recommendation 1: SQL Tuning
Estimated benefit is 46.39 active sessions, 31.87% of total activity.
Action
Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
possible performance improvements. You can supplement the information
given here with an ASH report for this SQL_ID.
Related Object
SQL statement with SQL_ID 974vg65j29pmv.
UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
Rationale
The SQL spent only 0% of its database time on CPU, I/O and Cluster
waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
Look at performance data for the SQL to find potential improvements.
Rationale
Database time for this SQL was divided as follows: 100% for SQL
execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
execution.
Rationale
SQL statement with SQL_ID "974vg65j29pmv" was executed 212 times and had
an average elapsed time of 2494 seconds.
Rationale
Waiting for event "enq: TX - row lock contention" in wait class
"Application" accounted for 100% of the database time spent in
processing the SQL statement with SQL_ID "974vg65j29pmv".

**addm report **
          ADDM Report for Task 'TASK_7526'
Analysis Period
AWR snapshot range from 5003 to 5004.
Time period starts at 08-JUL-13 11.00.27 AM
Time period ends at 08-JUL-13 12.00.45 PM
Analysis Target
Database 'AVAYADB' with DB ID 2878789264.
Database version 11.2.0.1.0.
ADDM performed an analysis of instance avayadb, numbered 1 and hosted at
NG-LA04AVAYA01.
Activity During the Analysis Period
Total database time was 563062 seconds.
The average number of active sessions was 155.63.
Summary of Findings
   Description         Active Sessions      Recommendations
                       Percent of Activity
1 Row Lock Waits      155.44 | 99.88       1
2 Top SQL Statements 26.67 | 17.14        1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Findings and Recommendations
Finding 1: Row Lock Waits
Impact is 155.4 active sessions, 99.88% of total activity.
SQL statements were found waiting for row lock waits.
   Recommendation 1: Application Analysis
   Estimated benefit is 155.44 active sessions, 99.88% of total activity.
   Action
      Significant row contention was detected in the TABLE
      "AVAYA.AIRTEL_CUSTOMER_MASTER" with object ID 82155. Trace the cause of
      row contention in the application logic using the given blocked SQL.
      Related Object
         Database object with ID 82155.
   Rationale
      The SQL statement with SQL_ID "974vg65j29pmv" was blocked on row locks.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The session with ID 167 and serial number 6084 in instance number 1 was
      the blocking session responsible for 100% of this recommendation's
      benefit.
   Symptoms That Led to the Finding:
      Wait class "Application" was consuming significant database time.
      Impact is 155.45 active sessions, 99.88% of total activity.
Finding 2: Top SQL Statements
Impact is 26.66 active sessions, 17.14% of total activity.
SQL statements consuming significant database time were found. These
statements offer a good opportunity for performance improvement.
   Recommendation 1: SQL Tuning
   Estimated benefit is 26.67 active sessions, 17.14% of total activity.
   Action
      Investigate the UPDATE statement with SQL_ID "974vg65j29pmv" for
      possible performance improvements. You can supplement the information
      given here with an ASH report for this SQL_ID.
      Related Object
         SQL statement with SQL_ID 974vg65j29pmv.
         UPDATE AVAYA.AIRTEL_CUSTOMER_MASTER SET PREFERRED_LANGUAGE = :1
         WHERE ( AIRTEL_CUSTOMER_MASTER.MSISDN = :2 )
   Rationale
      The SQL spent only 0% of its database time on CPU, I/O and Cluster
      waits. Therefore, the SQL Tuning Advisor is not applicable in this case.
      Look at performance data for the SQL to find potential improvements.
   Rationale
      Database time for this SQL was divided as follows: 100% for SQL
      execution, 0% for parsing, 0% for PL/SQL execution and 0% for Java
      execution.
   Rationale
      SQL statement with SQL_ID "974vg65j29pmv" was executed 707 times and had
      an average elapsed time of 794 seconds.
   Rationale
      Waiting for event "enq: TX - row lock contention" in wait class
      "Application" accounted for 100% of the database time spent in
      processing the SQL statement with SQL_ID "974vg65j29pmv".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          Additional Information
Miscellaneous Information
Wait class "Commit" was not consuming significant database time.
Wait class "Concurrency" was not consuming significant database time.
Wait class "Configuration" was not consuming significant database time.
Wait class "Network" was not consuming significant database time.
Wait class "User I/O" was not consuming significant database time.
Session connect and disconnect calls were not consuming significant database
time.
Hard parsing of SQL statements was not consuming significant database time.

N200 hangs during trans

I'm having problems with my N200 hanging during transfer. It appears as if it's doing a cache write. I've updated to the lastest drivers but when I display properties it seems to be using a Microsoft driver. I've switched USB ports at least once with no change. Can I do a manual driver update? If so what is the name of the driver I need?
Oh yea, it works fine on my laptop at work.
thanks for any help
David

dneylon wrote:I'm having problems with my N200 hanging during transfer. It appears as if it's doing a cache write.
Disable write caching for the dri've.
When connected find the player in Windows Explorer. Right-click on it and choose Properties then the Hardware tab (I think) - you should see a list of dri'ves. Choose your player's dri've letter and select Properties. On the next screen choose the Policies tab and disable write caching.
PB

SqlDev3.0 prod - Conn randomly hangs during opening, mainly with 11g RAC

Hi, i have been having this issue since i moved to 3.0 PROD version from EA version.
Now and then, same connection hangs during opening of connection, mainly with 11gR2 RAC databases. Sometimes it works with no changes. I don't see this problem with 10g RAC or non-RAC connection. Connection does not even make it to listener log file, so it looks like java thread gets into some hitch locally.
I wonder if somebody has found solution for this.
btw, with EA, i did not have problem with same connection. so far, i have been killing the sqldeveloper thru' task manager and then open it again (sometimes couple times, before i get thru').
Thanks

i can not use auto update from tool itself as we dont have admin rights on laptops(update feature is not able to contact download center of Oracle). so we use standalone releases of SQLDeveloper. How can i download this patch and apply it? do you have link to the patch? I did some search, it was not giving me anything useful.
I am using Version 3.0.04, Build MAIN-04.34 (From Help->About).

E71 Hangs During Call Reception

I purchased my Nokia E-71 about three months ago. I expected this phone to be up to par since it is considered an "Enterprise" phone. This my second firmware upgrade. My phone's current version is 200.21.118. To my surprise it hangs during call reception. It totally freezes; even the red power on/off button is not functional. The only resort is to unplug the battery and plug it back on. It's very exasperating to lose a business call, especially if it was an international one.
I call on Nokia to listen and pay attention to their customers and be responsible before it get deserted.

I understand your feelings but this is a user to user forum. There is no guarantee that your concerns will be seen by Nokia here and you will certainly not get a reply from them.
If you wish to contact them, you should use the "Contact us" tab on the top right hand corner of this screen.
With regards your problem, if it only started after the update then it is most probably a software issue which we would hope to help you resolve. We just have to go through a process of elimination, starting with the most likely and least disruptive. Whatever you do, always remember to backup your data just in case.

ITunes 10.5 hangs during iPhone 4 sync

Just installed iTunes 10.5 and attempted to sync iPhone 4/4.3.5 several times. The process hangs while "Backing up" with the status bar right under the t in (Step 1 of 5). I've swiped the phone to cancel, which leaves iTunes continuing on as if the phone were still syncing. I used Task Manager to quit iTunes on Win Vista, restarted iTunes and attempted to sync again. Hangs in the same place. So, I restarted the computer, restarted iTunes and it's still hanging during Backing up... I am so frustrated! Help!!!

I've two Windows 7 64 bit desktops.
On the one I've always used which has all my backups, apps, music etc etc I'm having the same problem and I've tried everything including above suggestion, removing and reinstalling, New download, stopping processes using MSCONFIG and Autoruns all to no avail.
On the scond PC it's all working perfectly but I've no backups, apps, data, music or data.
Not happy.

Sybase 16.0.00.01 hang during SUM upgrade.

Similar Messages

Maybe you are looking for