Sybase database licensing restrictions

As explained in the SAP notes 581312, 38403, 890379 related to software licensing that warn about software adaptations to the Oracle database delivered within SAP among other licensing topics, I want to know if there is a license restriction for the SAP systems based on a Sybase DBMS.
Is it a recommended practice to access the Sybase database delivered within the framework of the SAP software, without using ECC? since I can't find any related documentation about Sybase.
Any SAP note, SDN thread, URL or document would be useful.
Thanks.
Regards,
Carlos Tolosa

Thanks REO51ST.

Similar Messages

  • Licensing restrictions on cloning databases

    I've asked this in the Database forum, but I've not received any meaningful replies there. Apologies in advance if I'm repeating myself here to no good purpose.
    We currently run Standard Edition 10.2.0.4. We use RMAN to clone a production environment to a different server and call that clone our test environment. We do the same thing to create development environments.
    Our test & dev hardware is not especially great, however, so it was supposed that we could downgrade the licenses on those boxes to Standard Edition One (SE1), which would save us thousands each year. It was also suggested that we leave the production boxes at full Standard Edition.
    We have been told, however, that if production is SE and test/dev is SE1, we cannot then legally use RMAN to clone from the one to the other. That our only choice at that point would be to use export/import techniques to move the data from the SE environment to the SE1 one.
    I know licensing questions are awkward, and I'm not asking for a lawyer's opinion! I would just like to know whether anyone else has heard of or encountered this licensing restriction and has had, as a result, to use exp/imp or expd/impd instead of RMAN to create dev/test environments. Or is our informant completely misguided when he states that use of RMAN to clone between SE and SE1 environments would be outside the license terms for either?

    As per Licensing terms what I know is as developer Licensing you can you the DB free of licence.
    I do not see any problem moving your data to the development instance and do testing and developments.
    If you are doing this as a parallel reporting requirement then you may face with licensing issue. There also if both you instance as active passive. (Always one instance is in passive mode) again you may not have to face this issue.
    I am not sure about using rman that there is any restriction as such if you are facing such issues why don't you do a cold backup to do the cloning.(Shutdown the DB and copy the required files to start the other instance)
    I hope you might have got some kind of a useful answered.
    All the best..
    Regards, Shaamil.
    Edited by: A Shaamil on Apr 21, 2009 8:12 PM

  • Problems with Sybase Database for Collection Manager in SCE2020

    We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
    [root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem           1K-blocks      Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00                      149559596 138280700   3681636  98% / /dev/sda1               101086     20685     75182  22% /boot none                   1036624         0   1036624   0% /dev/shm
    We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
    Here is the info:
    Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
    [root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
    Name                    % Data Free % Log Free
    Database                        55      99
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
    /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
    /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
    [root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
    Test: 01db_up.sh. Status: FAIL. Message: DB is not running
    Test: 02cm_up.sh. Status: PASS. Message: CM is running
    Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
    Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
    Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
    Message was edited by: EMILIO MENCIA

    Tomo:
    we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
    This is the log of the CM. What can be the problem? Thanks tomo
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts during current sample period: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts since startup: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections during current sample period: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections since startup: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections during current sample period: 15.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections since startup: 18.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used during current sample period: 1.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used since startup: 3.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Error: 632, Severity: 20, State: 2
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Attempt to move memory with an incorrect length
    of -794444483. Maximum allowed length is 16384.
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  SQL causing error : =
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curdb = 4 tempdb = 2 pstat = 0x10000
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  lasterror = 632 preverror = 0 transtate = 3
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curcmd = 0 program =                          
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  end of stack trace, spid 11, kpid 1755578479, suid 3
    AFTER RESTART
    ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Adaptive Server Enterprise (Small Business Edition)
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel  Using config area from primary master device.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel  Locking shared memory into physical memory.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel  Internal run-time model set for Linux  - Native
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using 1024 file descriptors.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Copyright 1987, 2007
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc.  All rights reserved.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Unpublished rights reserved under U.S. copyright laws.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel 
    Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
    Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  This software contains confidential and trade secret information of Sybase,
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Inc.   Use,  duplication or disclosure of the software and documentation by
    Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  the  U.S.  Government  is  subject  to  restrictions set forth in a license
    Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  between  the  Government  and  Sybase,  Inc.  or  other  written
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  specifying  the  Government's rights to use the software and any
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  applicable FAR provisions, for example, FAR 52.227-19.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Platform TCP network is forced to IPv4-only.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel  ASE booted with TCP_NODELAY enabled.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  SSL Plus v5.0.4 security modules loaded successfully.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  Network and device connection limit is 1009.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Number of blocks left for proc headers: 12760.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Proc header memory allocated 2552 pages for each per engine cache
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Size of the 16K memory pool: 307200 Kb
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Memory allocated for the default data cache cachelet 1: 307200 Kb
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Enabling Linux Native Kernel asynchronous disk I/O strategy.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Virtual device 0 started using asynchronous i/o.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server  Loaded default Unilib conversion handle.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel  Worker Thread Manager is not enabled for use in ASE.
    Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Unix interval timer enabled for sysclk interrupts.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel  Begin processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Completed processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Encryption provider initialization succeeded on engine 0.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  engine 0, os pid 27618  online
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server  No active traceflags
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel  libomni1 - Component Integration Services: usin
    g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server  Opening Master Database ...
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server  Loading ASE's default sort order and character set
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server  Recovering database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server  Started estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started REDO pass for database 'master'. The total number of log records to process is 13.
    Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Redo pass of recovery has processed 4 committed and 0 aborted transactions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Completed REDO pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Recovery of database 'master' will undo incomplete nested top actions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Started recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server  Completed recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server  Started filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server  Completed filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Started cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Completed cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server  Checking external objects.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  Database 'master' is now online.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  The transaction log in the database 'master' will use I/O size of 16 Kb.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server  Warning: ASE_HA has no valid license and therefore is not initialized.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server  server name is 'pqbsyb1'
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server  Activating disk 'sysprocsdev' of size 126976 KB.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Virtual device 1 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server  Activating disk 'systemdbdev' of size 49152 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Virtual device 2 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server  Activating disk 'apricot_data1' of size 35082660 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server  Activating disk 'apricot_log1' of size 2980002 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server  Activating disk 'tempdb_dev' of size 1048576 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Virtual device 5 started using asynchronous i/o.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server  Recovering database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server  Started estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Completed REDO pass for database 'sybsystemdb'.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Started recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server  Completed recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server  Started filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server  Completed filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Started cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Completed cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Boot Count: 13
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server  Checking external objects.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server  The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server  Completed recovery checkpoint for database 'model'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server  Started filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server  Completed filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Started cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Completed cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server  Checking external objects.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server  The transaction log in the database 'model' will use I/O size of 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Database 'model' is now online.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  The logical pagesize of the server is 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  0 dump conditions detected at boot time
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Clearing temp db
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server  Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server  Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server  Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server  Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server  Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server  Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
    Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server  Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
    Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server  Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server  Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server  Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server  The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server  Database 'tempdb' is now online.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server  Recovering database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server  Started estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed REDO pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server  Completed recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server  Started filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server  Completed filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Started cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Completed cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server  Checking external objects.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server  The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server  Database 'sybsystemprocs' is now online.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  The server will recover databases serially.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server  Recovering database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server  Started estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started REDO pass for database 'apricot'. The total number of log records to process is 846.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Redo pass of recovery has processed 2 committed and 138 aborted transactions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Completed REDO pass for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Recovery of database 'apricot' will undo incomplete nested top actions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Started recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server  Completed recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server  Started filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server  Completed filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Started cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Completed cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server  Checking external objects.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server  The transaction log in the database 'apricot' will use I/O size of 16 Kb.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server  Database 'apricot' is now online.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server  Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server  Recovery complete.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default unicode sort order is 'binary'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default sort order is:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'bin_iso_1' (ID = 50)
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  on top of default character set:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'iso_1' (ID = 1).
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  Cannot send, host process disconnected: btl-sce-cm  suid: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  Error: 1608, Severity: 18, State: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0)

  • How to control the number of rows selected from a sybase database table?

    Hi, JDBC guru,
    I'm working on project using Sybase 11.9.x database.We need to process a record in a table,first select it from the table,then do some computing,finally write it to a dbf file, if the above steps succeed,remove the original row in the table.Quite evidently, all these operation should be put into one transaction. But how can I select just a number of rows from the sybase database table?
    Any hints?
    Thank you in advance.
    Regards,
    Jusitne

    Statement stmt...
    stmt.setMaxRows(20);

  • Licensing restrictions on RE-use of HP (small business) notebook HW components?

    Licensing restrictions on RE-use of HP (small business) notebook HW components?
    I realize that it is illegal to use some of the (OEM) software that was distributed with the refurbished HP nw8440 Mobile Pro Workstation (small business HP Compaq notebook) I bought (direct from HP) on a different computer system (than the one the software came with).
    My question, though concerns the hardware (hard disk, keyboard, memory modules, speakers, mouse, etc.) components that came with it.
    Specifically, is it legal for me to use such hardware components on a different computer system (than the one the software came with), or even to sell it, give it away, or dispose of it (separately from the HP computer system that it came with)?
    The reason I ask is that one of the licensing agreements that came with the system said something like:
    The initial user of the product may make a one-time transfer of the product to another end-user. ... The transfer may not be an indirect transfer, such as a consignment.
    and I'm retiring this (Windows XP) computer, and am unfamiliar with such licensing terms.
    I just started using its hard drive in an older desktop we have whose hard drive failed.
    I believe that should be OK license-wise, but it made me wonder what restrictions, if any, I might have on other future uses of such hardware.
    Thank you.
    - RJ in USA
    P.S. - Please forgive me if this is not the right place to ask this question. I wasn't sure where to ask it.
    This question was solved.
    View Solution.

    Thanks REO51ST.

  • How do I connect to a Sybase database from Crystal?

    I have never tried to connect to Sybase data before and I am having difficulty figuring out how.  I am using CR XIR2 from my desktop and trying to connect to what I am told is a Sybase database (voicemail system).  I believe Sybase vers 12.5, but not entirely sure yet.  Postings on the forum and other sites appear to be directed toward sdk developers or other development and were not helpful.  Most of what I am reading points toward an Adaptive Server® Enterprise (ASE) ODBC Driver by Sybase.  However, I was told that was not true but the person promising to forward the information never came through. Are there additional drivers I need to install or can someone point me in the right direction?  Thanks!

    Hi Wendy,
    32-bit NATIVE DRIVERS
    CRDB_P2SSYB10.DLL is the native driver for Sybase ASE.  It is used with Sybase ASE 12.5
    NOTE:  The native driver for Sybase ASE cannot be used to connect to Sybase ASA (Adaptive Server Anywhere) or Sybase ASIQ (Adaptive Server IQ).  Sybase ASA and Sybase ASIQ include their own ODBC drivers as part of their installation package.  These drivers provide the only means of connecting to Sybase ASA and Sybase ASIQ databases.
    I hope this helps you.
    Regards,
    Prashant
    Edited by: Prashant Saduwale on Oct 10, 2008 4:19 PM

  • How to connect sybase database in JDeveloper 11g using JConnect

    Hi
    How to connect sybase database in JDeveloper 11g using JConnect? Please help.

    User,
    It would help if you explained Sybase Jconnect instead of leaving us to google.
    At any rate, it appears you need to create a library definition in JDeveloper, add the appropriate JConnect JAR files to the library's classpath, and then add the library to your project.
    John

  • What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi All,
    What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?

    Hi Jayachander,
    Have a look at these sap notes:
    For taking backup: Schedule from DB13 and get the exact command from Logs
    1841993 - SYB: How to schedule backups in DBA Cockpit
    1887068 - SYB: Using external backup and restore with SAP Sybase ASE
    How to restore DB
    1611715 - SYB: How to restore a Sybase ASE database server (Windows)
    Divyanshu

  • Oracle Gateway Not Connecting to Sybase database

    Hi,
    I'm trying to setup an oracle gateway to connect to Sybase database. I followed in details the instructions but still can connect successfully. The Oracle database is in RAC environment. Below are the steps I took:
    The oracle gateway and oracle database are in the same server while Sybase is on a separate unix box.
    1. create an initdg4sybs.ora file
    # This is a customized agent init file that contains the HS parameters
    # that are needed for the Database Gateway for Sybase
    # HS init parameters
    HS_FDS_CONNECT_INFO=[999.99.108.99]:4527/common ## IP address of sybase server
    HS_FDS_TRACE_LEVEL=ON
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    2. create a listener on the oracle gateway home
    # listener.ora Network Configuration File: /u03/app/oracle/gateway/11.2/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER_DG4SYSBS =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1543))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 99.999.155.26)(PORT = 1543)(IP = FIRST)) #IP address of oracle gateway (node A)
    (ADDRESS = (PROTOCOL = TCP)(HOST = 99.999.155.24)(PORT = 1543)(IP = FIRST)) #IP address of oracle gateway (node B)
    SID_LIST_LISTENER_DG4SYSBS=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=dg4sybs)
    (ORACLE_HOME=/u03/app/oracle/gateway/11.2)
    (ENVS="LD_LIBRARY_PATH=/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib:/u03/app/oracle/gateway/11.2/lib")
    (PROGRAM=dg4sybs)
    ADR_BASE_LISTENER = /u03/app/oracle/gateway/11.2
    TRACE_LEVEL_LISTENER_DG4SYSBS = OFF
    TRACE_FILE_LISTENER_DG4SYSBS = /u03/app/oracle/gateway/11.2/network/admin/LISTENER_DG4SYBS.trc
    INBOUND_CONNECT_TIMEOUT_LISTENER_DG4SYSBS=0
    3. create tnsnames.ora in oracle database home
    dg4sybs =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 99.999.155.26)(PORT = 1543)) #IP address of Node A
    (CONNECT_DATA =
    (SERVER = DEDICATED) #added for single node test
    (SID = dg4sybs)
    (HS=OK)
    4. create database link
    create database link dg4sybs connect to "user" identified by "password" using 'dg4sybs'
    5. when testing the connection; i'm getting below error message. tried all the setup based my research and couldn't make it work.
    SQL> select * from dual@dg4sybs
    2 /
    select * from dual@dg4sybs
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    Process ID: 7427
    Session ID: 495 Serial number: 787
    I perform above settings on a standalone database running in windows and successfully connect to the sybase. In UNIX setup, been unsuccessful. Can someone please help.
    Also, below is the trace file error message:
    Oracle Corporation --- THURSDAY OCT 18 2012 10:57:55.747
    Heterogeneous Agent Release
    11.2.0.1.0
    Oracle Corporation --- THURSDAY OCT 18 2012 10:57:55.745
    Version 11.2.0.1.0
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
    ODBCINST set to "/u03/app/oracle/gateway/11.2/dg4sybs/driver/dg4sybs.loc"
    RC=-1 from HOSGIP for "LD_LIBRARY_PATH_64"
    Setting LD_LIBRARY_PATH_64 to "/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib"
    HOSGIP for "HS_FDS_SHAREABLE_NAME_ICU" returned "/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib/libHGicu23.so"
    HOSGIP for "HS_FDS_SHAREABLE_NAME_INST" returned "/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib/libodbcinst.so"
    HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib/libodbc.so"
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
    HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
    HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
    HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
    HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
    HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    using ro as default value for "HS_FDS_DEFAULT_OWNER"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    SQL text from hgopars, id=1, len=20 ...
    00: 53454C45 4354202A 2046524F 4D202244 [SELECT * FROM "D]
    10: 55414C22 [UAL"]
    hgopars, line 526: calling SQLNumResultCols got sqlstate 42S02
    SQL text from hgopars, id=2, len=57 ...
    00: 53454C45 43542027 58272046 524F4D20 [SELECT 'X' FROM ]
    10: 2264626F 222E2273 79737573 65727322 ["dbo"."sysusers"]
    20: 20413120 57484552 45204131 2E226E61 [ A1 WHERE A1."na]
    30: 6D65223D 2764626F 27 [me"='dbo']
    Deferred open until first fetch.
    HS Agent received unexpected RPC disconnect
    Network error 1003:  NCR-01003: NCRS: Read error.
    Edited by: gonzroman on Oct 18, 2012 11:03 AM

    -=-=-=-=-=- tnsnames.ora on the UNIX side
    GTW_C100_COMN =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.124.155.26)(PORT = 1543)) #IP address of jrc1suvip01a
    #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.124.155.24)(PORT = 1543)) #IP address of jrc1sudb01a
    (CONNECT_DATA =
    (SERVER = DEDICATED) # added for single configuration
    (SID = dg4sybs_comn_c100)
    (HS=OK)
    -=-=-=-=-=- listener.ora of the GATEWAY
    LISTENER_DG4SYSBS =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1543))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.124.155.26)(PORT = 1543)(IP = FIRST)) #IP address of jrc1suvip01a
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.124.155.24)(PORT = 1543)(IP = FIRST)) #IP address of jrc1sudb01a
    #(ADDRESS = (PROTOCOL = TCP)(HOST = jrc1suvip01a)(PORT = 1543))
    SID_LIST_LISTENER_DG4SYSBS=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=dg4sybs)
    (ORACLE_HOME=/u03/app/oracle/gateway/11.2)
    (ENVS="LD_LIBRARY_PATH=/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib:/u03/app/oracle/gateway/11.2/lib")
    (PROGRAM=dg4sybs)
    (SID_DESC=
    (SID_NAME=dg4sybs_comn_c100)
    (ORACLE_HOME=/u03/app/oracle/gateway/11.2)
    (ENVS="LD_LIBRARY_PATH=/u03/app/oracle/gateway/11.2/dg4sybs/driver/lib:/u03/app/oracle/gateway/11.2/lib")
    (PROGRAM=dg4sybs)
    ADR_BASE_LISTENER = /u03/app/oracle/gateway/11.2
    TRACE_LEVEL_LISTENER_DG4SYSBS = OFF
    TRACE_FILE_LISTENER_DG4SYSBS = /u03/app/oracle/gateway/11.2/network/admin/LISTENER_DG4SYBS.trc
    INBOUND_CONNECT_TIMEOUT_LISTENER_DG4SYSBS=0
    -=-=-=-=- initdg4sybs_comn_c100.ora parameter
    # This is a customized agent init file that contains the HS parameters
    # that are needed for the Database Gateway for Sybase
    # HS init parameters
    #HS_FDS_CONNECT_INFO=[glb0pod29.aexeo.citco.com]:4100/common
    HS_FDS_CONNECT_INFO=[209.87.108.99]:4527/common
    HS_FDS_TRACE_LEVEL=ON
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    -=-=-=-=- gateway listener status
    jrc1sudb01a:/u03/app/oracle/gateway/11.2/dg4sybs/admin $ lsnrctl status LISTENER_DG4SYSBS
    LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 20-OCT-2012 13:09:05
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1543)))
    STATUS of the LISTENER
    Alias LISTENER_DG4SYSBS
    Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
    Start Date 18-OCT-2012 13:16:24
    Uptime 1 days 23 hr. 52 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u03/app/oracle/gateway/11.2/network/admin/listener.ora
    Listener Log File /u03/app/oracle/gateway/11.2/log/diag/tnslsnr/jrc1sudb01a/listener_dg4sysbs/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1543)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.124.155.26)(PORT=1543)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.124.155.24)(PORT=1543)))
    Services Summary...
    Service "dg4sybs" has 1 instance(s).
    Instance "dg4sybs", status UNKNOWN, has 1 handler(s) for this service...
    Service "dg4sybs_comn_c100" has 1 instance(s).
    Instance "dg4sybs_comn_c100", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    -=-=-=-=-=- tnsping output
    jrc1sudb01a:/u03/app/oracle/product/11.2.0.3/network/admin $ tnsping dg4sybs
    TNS Ping Utility for Solaris: Version 11.2.0.3.0 - Production on 20-OCT-2012 13:11:28
    Copyright (c) 1997, 2011, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.124.155.24)(PORT = 1543)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = dg4sybs)) (HS=OK))
    OK (10 msec)
    jrc1sudb01a:/u03/app/oracle/product/11.2.0.3/network/admin $ tnsping GTW_C100_COMN
    TNS Ping Utility for Solaris: Version 11.2.0.3.0 - Production on 20-OCT-2012 13:11:35
    Copyright (c) 1997, 2011, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.124.155.26)(PORT = 1543)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = dg4sybs_comn_c100)) (HS=OK))
    OK (0 msec)

  • I get this message "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again. I have this file from when I had CS4. It worked then. I trying to make

    I get this message when I am trying to save a file that was done in CS4, now using  CS6 "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again." Even if I start a new file I unable to save it with this font. I need to use this font.

    Then you need to outline all text before savng the PDF.
    Make sure you do this on a copy of the file.

  • Dolby Audio Decode Licensing Restriction

    I have used the same video camera Canon which shoots AVCHD for 2 years now and had Adobe CS 5 Production Premium for Windows, CS 5.5 for Mac and now Creative Cloud on both a Mac and Windows 7 64 bit computer. No problems inputting the same footage week after week until about 2 months ago. Now on the Windows PC the audio in my video does not get conformed when videos are imported. Instead I get a "Dolby Audio Decode Licensing Restriction for <my path to .MTS file> This installation does not have a license to decode Dolby Digital audio.". Did Adobe put out a Creative Cloud update that broke something? I do not have this problem on the Mac. But the Windows PC is my video production machine and needs to be working again. Please help.

    I unsintalled and reinstalled PP CS 6. When I imported the files again, 2 of them no longer gave the error and conformed the audio, but 2 other files gave a new error (forget what that one was) and did not conform. I got the camera back today as these were videos copied from the camera memory to SD card, then onto hard drive. Connecting the camera directly I was able to copy directly from the camera to my computer and when I import that file into PP, it can conform the audio no problem.
    Also, one of the videos was supposedly corrupted and could not load at all that was copied from the SD card and was the same when reading the card directly from my Mac and PC. I was able to copy it directly from camera to hard drive and it imported with no issues.
    Could it be that a bad sector on the SD card causes the video to be corrupted when copied, then transferred bad video to PC? Should that cause PP to throw this licensing issue though? Adobe should at least know under what coding circumstances they would throw such a specific error. Maybe it could instead say the audio in the video is corrupt or something. I will update this again if next time something different happens again.

  • Software compatibility About ORACLE BC and ADF 11g with Sybase Database

    I am using jdeveloper 11g xxx.0.2, and our company is using Sybase 12.x ASE. Our team chose Jdeveloper 11g and BC with ADF as our architecture. But during about 2 months, we found the bug (just with sybase db server) becomes more and more, strange, the dialect which we can choose does not have sybase (the have Oracle,Sql Server,DB2,SQL92 and others), we now have the only one way -- to choose SQL 92. But many bugs or other problem comes out, sometimes we event have to write lots of codes to realise a very very simple function. is that all because there's no sybase dialect or i guess the sqlbuilder for sybase database? Someone can explain why? or can help me go through the trouble? We need your help!!!!!!

    Thanks for reply, we can not change our tech now, and could you please show me a way? should I extend baseSqlBuilderImpl and override some important methods there to generate sql suitable in sybase?
    I have override the sql generate method and the lov bug was fixed( The bug is IT recognize int var as a string var, and uses like instead of =), but we still can't fix view criteria, the default declarative view criteria can not run most time. And i don't know why. can adf support team to do a enhancement for sybase? Thanks a lot
    Edited by: Roger Liu on Oct 29, 2009 6:10 AM

  • JDBC query with Sybase database

    Hi Folks,
    I am working with Oracle 9i Reports Builder connecting to Sybase database using jdbc-odbc driver type.
    I could connect to the database, use a simple query and generate reports.
    Problem is only when, I use a variable in WHERE clause and have
    1. group functions in SELECT statements (i.e. sum(), count()..)
    2. NOT IN operations in one of conditions
    Error message was thrown saying "Incorrect Syntax near ':.' "
    (I declare a variable in USER PARAMETER and use the same in WHERE clause by refering say "where trandate=:m_trandate".)
    Though there is no syntax error AT ALL. Am very sure about it, because when I execute the same statement in "isql" , it works perfectly.
    Can anyone, let me know whether Is it a limitation on Report Builder with Sybase db or Is any configuration do I miss??
    Also, let me know if there is any work around process to handle this situation.
    Sample Query I tried :
    select item, avg(rate) from inventory
    where item=:mitem /* mitem is a variable */
    group by item
    Any information is welcome.
    Thanks & Regards
    Anand
    Mail ID: [email protected]

    Hi Sachin,
    I too, got through the issue. Sorry am bit late in updating you. But still I would say it is not on consistent(my feedback as per I grabbed from the behavior. Say, I accepted the query in a particular order of WHERE clause, then If I change the order it will throw an error message saying "Incorrect syntax".)
    Anyway working fine. Thanks for your immediate response with useful hints.
    Rgds
    Anand
    Hi Anand,
    Yes, JDBCPDS accepts all Select queries which follows SQL Specification.
    It would be a valid query as per the database used.
    Please try again, Bind parameters can be placed in any or all of the conditions of SQL Query in JDBCPDS.
    I am able to use them in both the cases you told.
    With Regards
    Reports team

  • How to put database in RESTRICTED mode ?

    Hi,
    in 9.2.0.6 on Windows 2003 server how to put database in RESTRICTED mode ?
    Many thanks before.

    ERROR at line 1:
    ORA-12719: operation requires database is in RESTRICTED mode
    That's because 'ALTER SYSTEM QUIESCE RESTRICTED' doesn't actually put the database into restricted mode:
    SQL> select logins, active_state from v$instance;
    LOGINS       ACTIVE_ST
    ALLOWED       NORMAL
    SQL> alter system quiesce restricted;
    System altered.
    SQL> select logins, active_state from v$instance;
    LOGINS       ACTIVE_ST
    ALLOWED       QUIESCEDTry staring the database in restricted mode and then quiescing it:
    SQL>
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup restrict;
    ORACLE instance started.
    Total System Global Area  167772160 bytes
    Fixed Size                  1289508 bytes
    Variable Size             117441244 bytes
    Database Buffers           46137344 bytes
    Redo Buffers                2904064 bytes
    Database mounted.
    Database opened.
    SQL> alter system quiesce restricted;
    System altered.
    SQL> select logins, active_state from v$instance;
    LOGINS           ACTIVE_ST
    RESTRICTED       QUIESCED
    SQL>As you can see from V$INSTANCE, when you are running in restricted mode LOGINS will have a value of 'RESTRICTED'
    However - I still think that if you are dealing with users logging in to your (RESTRICTED) database via the listener then the easiest option is to stop the listener whilst the database is down and restart it once your alter database command has completed.
    PS : No any other user is connected.No, they wouldn't be this time because you had quiesced the database... but you still need to get the database into restricted mode for this alter database command.

  • Can I use attunity CDC to propagate changes from sql server to a sybase database

    can i use attunity cdc components in sql server to propagate changes to a sybase destination. I did some experimenting with cdc in ssis 2012 and got it working to send changes to sybase, but I need to do this for approx 5000 tables. so looking for a product
    that can do this for me.
    ny help welcome
    thanks
    Geert Vanhove DCOD ------ http://geertvanhove.wordpress.com/ ----------- Please click the Mark as Answer or Vote As Helpful if a post solves your problem or is helpful!

    Hello,
    It seems that you try to with captures SQL Server data changes and move to Sybase database with Attunity CDC. Since it is a thrid party tool, I suggestion that you post the question in the
    Attunity site for support.
    Reference:Attunity CDC
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

Maybe you are looking for

  • Can any one explain me about Listeners in Java

    Hi, Can any one explain the Listeners concept in Java?? Will that work like net send in Windows NT?? How can we achieve the net send type of messaging in an Intenet application?? Is there any possibility?? Please help me out... Thanks in advance, Cha

  • Custom Reports in SQL Developer and translations files

    I try to do custom reports for our development team and I would have translated ones, like standards does. Does anyone have any informations on how to do that ? I tried with xliff file in the same directory of my custom xml but without any result. Ha

  • Tax - Tax Rules - Tax clasificacion code

    Hi everyone, I'm re-implantant a eBS 12.1.3 from eBS 11i I have setup EB Tax with a unique tax regime which has various tax defined... each tax has associated an unique tax status and each tax & tax status have associated various tax rates... Then, I

  • E-rec  start page

    Can any 1 tell me how to go to succession planner’s start page

  • Regardnig the Cube Processing.

    Hello Team,                  When I tried to process the cube, am getting the folowing window, which shows the cube processing whch is in progress. My Questions are . What is the number which we can see as 9 of 13?. Why It is different for each parti