Sybase Replication Server install hanging

I have installed the Primary instance, then installed the empty databaseon the standby server. Installed SRS on the standby (without the
configuration) option, then gone back to the Standby and I am now in the process of installing SRS on there (it asks you for the primary and
standby site and
ports etc) it's happily accepted, but has just hung at the point
mentioned (see screenshot) and it keeps writing the isql64** files
(where
** is incremented number.
but
I am working from the Primary.
eg:
isql64
isql64.2301
isql64.2300
isql64.2299
The install hasn't failed, it's just hanging and spewing out to these files...has anyone seen this before?...Could someone, please, tell me what I'm missing here?!

Thanks!!! I was going to say that all those isql64* are isql sessions running commands so you aren't "hanging" - it doing something - most likely materializing - doing the dump/load from source to target - but if you post in SRS SCN, there may be some nuances others may be able to help with.

Similar Messages

Replication Server Install hanging? (via sapinst)

I have installed the Primary instance, then installed the empty database on the standby server. Installed SRS on the standby (without the
configuration) option, then gone back to the Standby and I am now in the process of installing SRS on there (it asks you for the primary and
standby site and
ports etc) it's happily accepted, but it seems to have just hung at the point
mentioned (see screenshot) and it keeps writing the isql64** files
(where
** is incremented number.
but
I am working from the Primary.
eg:
isql64
isql64.2301
isql64.2300
isql64.2299
The install hasn't failed, it's just hanging and spewing out to these files...has anyone seen this before?...Could someone, please, tell me what I'm missing here?!

Hi Neil,
Can you please file an incident with support?
Regards,
Bill

Unable to connect hana with sybase replication server and i am not getting ECH plz help

unable to connect hana with sybase replication server and i am not getting ECH plz help

Please don't necrobump/hijack threads: https://wiki.archlinux.org/index.php/Fo … bumping.22
https://wiki.archlinux.org/index.php/Fo … _hijacking
Closing

Is Sybase Replication Server certified for Oracle 12 already?

Hi,
where can I find an overview of the latest Oracle database versions and builds that are supported by the Sybase Replication Server? Thanks!

Oracle 12c (12.1) is supported
Product Compatibility

Creating atomic subscription in Sybase Replication Server

I am trying to create atomic subscription in sybase repserver where my primary database is ORACLE and target database is Sybase ASE. For non materialization the subscription is created but for atomic subscription its not creating.
Do I need to have any pre-requisites for that?????

Hi Kenny,
please see here:
https://training.sap.com/de/de/search?query=Sybase+replication+server
You can change the country in the drop-down menu at the top.
Regards,
Arnold

How does Sybase Replication Server capture data changes?

Hello,
as far as I know Sybase Replication Server is a central component in a HANA-based enviroment when it comes to replicate data towards HANA engine.
I scan briefly through a white paper of Sybase, but I gives no technical description how the Sybase Replication Server captures data change on the source database.
Can someone gives here explanation?
All the best,
Guido

Hello Marc,
thanks for fair and hornest answer!
I'm currently involved in SAP based project where we are migrated business on DB level, which is some kind of operation a heart. I personally have huge respect for this approach.
Caputring the changes on DB level is a appoarch, but I personally think that you need to capture event on business object level. For exammple the SAP good old workflow knows events for business objects. Also in a ESA-driven application you should have some kind on eventing for business objects.
For the time being the current approach might working for a kind of Proof-of-Concept,
but on a mid and long-term based you need to RETHINK!
All the best & Merry Christmas & Happy new year
Guido

The Sybase Replication Server Connection

Hello
I have a problem, My program connects to sybase replication server to change the password of one user on that database, the change is done without any problem but when the program finished I got an error of com.sybase.jdbc2.jdbc.SybSQLException: User 'x' is altered.
Normally in Sybase this message means that everything is done perfectly and also when I check the password change has been occured but I dont know why I get this message in catch of the connection.
Thanks in advance

Could be a driver bug.
If you are sure it is working then catch the exception and look exclusively for that error message. If it shows up then just ignore it.

Sybase replication server training

Hi,
We are looking for classroom based Sybase replication server training courses (English) in Germany or other European countries.
It seems like SAP is no longer running classroom based course and none of it's listed training partners are running Sybase replication server courses.
Does anyone know of a training facility that still runs the replication server course in English ?
Thanks in advance,
Regards,
Kenny

Hi Kenny,
please see here:
https://training.sap.com/de/de/search?query=Sybase+replication+server
You can change the country in the drop-down menu at the top.
Regards,
Arnold

Sybase replication server on HA / DR

Hi Experts,
We are in the process of setting up DR environment for Sybase ASE using replication server. The primary site has an HA configured.
My doubt is when we need to install replication server at standby site, what host needs to be specified as the "primary system hostname" - The hostname of CI or the DB server.
Additionally, do we need to install replication server on both nodes of HA cluster? and how would the DR agent configuration work in case of DB failover to the CI node?
Unfortunately, there is very little documentation available online on how to setup the DR environment, apart from SAP note 1891560
Would appreciate your invaluable inputs on this.
Thanks in anticipation.
Regards,
Varun

Hi Varun,
Sorry - I don't have any experience with the IBM solution. So I have comments, but not a solution.
The HADR Solution will work well in HA / cluster systems where the IP address is dynamically re-assigned to the active node. This allows the server configurations to point to just 'one' IP address and the cluster software (examples: MS Cluster, Veritas, HP Service Guard) assigns that IP to which ever node is active.
Using the IBM solution, (based on a quick Google search) it appears we rely on Open Server HA capability to include both addresses in the interfaces file under a single Server name, so that both address can be attempted when making a connection.
Unfortunately, the configurations created by the DR Agent do not support this type of configuration using Interfaces files. Most server address are assigned a single IP address, and most address are assigned directly (not pointing to an Interfaces file entry).
As an example, when the HADR nodes are configured in ASE, you define the other nodes in the HADR group with a command like the following:
sp_hadr_admin addserver, <node_name>,<server_name>
To use a interfaces file name for the server name, the command might look like:
sp_hadr_admin addserver, 'D01_Site1', 'D01'
But the configurations created by the DR Agent use a host:port syntax instead of an interfaces file server name, like:
sp_hadr_admin addserver, 'D01_Site1', 'host1.my.domain.corp:5001'
The point I am trying to make is that even if we edit the interfaces files to use the additional HA addresses, other configurations like the one above would need to be discovered and changed as well.
Unfortunately, even if all this reconfiguration work is accomplished successfully, the DR Agent itself does not use interfaces files and has no support for specifying an alternate HA address. And I am not aware of any workaround for that limitation.
In summary, I think that short answer is that we don't have HADR support using DR Agent for HA environments without a dynamic IP address. It might be possible to manually reconfigure some of it, but without support in the DR Agent itself, you would be missing failover and monitoring support the DR Agent provides.
Sorry that I do not have a more encouraging answer.
Regards,
Stephen

Oracle VM 3.1.1 server install hangs

OVM 3.1.1 64 bit
i7 cpu
Hi,
I'm trying to instal OVM on n server. But it hangs at different stages. I have searched the web and came across guys that had similar issues and and went ovm 2.2 and passing kernel parameters before the install.
http://someoracledba.blogspot.com/2010_12_01_archive.html
I tried that and it installed but it doesn't ask for ip or hostname and lspci | grep -i eth but says unkown device.
I would really like advice either on how to pass the kernel parameters for 3.1.1.

To update :
I gad to pass installer kernal parameters, and set cpu's to 4 :
mboot.c32 xen.gzmaxcpus=4 --- vmlinuz apic=bigsmp ---init.img
This worked, but why doesn't it allow 8 cpu's. I have a intel i7 8 core cpu, anyone?

Server install hangs at calendar services

I performed a fresh install of OSX Server following issues with upgrading to version 4.0.3. Even with a fresh install, the server hangs on "Preparing Calendar Services," and won't move beyond it. Any ideas?

Hi
You may find following the steps outlined in the 'answer' on this thread helps fix your problem. The step (to kill one process running during the install sequence) is a lot less invasive than doing clean builds and so on.
Hope it helps.

Server install, hangs at drive erase

Greetings all - maybe someone out can lend some advice or point me to some resources. I'm installing tiger server on a g4 that was "donated" to our office. The box has the current server package already installed. I want to clean the slate before putting in our network, makes sense right? However, I'm getting the spinning beach ball of death when attempting to erase the drive during installation. Perhaps this is why it as a donation...

Thanks for your help Roger. I tried tried the disk utility as well with the same result. To get beyond this hold up (and although not a fix and I'm still curious why), I used 10.3's drive erase/installation, then installed the 10.4 server, erasing the drive again before installation. I ended the day with a fresh install of the server and a few hours of overtime.

Is using Sybase Rep Server with SAP HANA a possibility?

We have a customer has system that they are already using Sybase Replication Server. They are asking to add HANA and BusinessObjects BI Platform as a sidecar, to there system and remove the Java applications they are using for reporting. They are wondering if they can use Sybase Rep server to move the data into Hana instead of SLT.

If you have a SAP Business Suite system then SLT is the recommended approach since carries out a application level replication of sorts. However, for non SAP Business Suite systems you do have the option to use Sybase Replication Server for HANA. Ask your customer to speak to their SAP Account Manager and she/he will be able to advice them on the option.
Have a look at the link below for pointers:Replicating data to HANA using SAP Sybase Replication Server.

ASE 12.5 and replication server 15.1, - MS-SQL server

Our company has Sybase ASE version 12.5 and Sybase Replication Server 15.1. We would like to replicate data from/to Microsoft SQL server. How can this be done with our current environment?

NOTE: I haven't worked with Sybase repserver and MSSQL (as source or target) so fwiw ...
I looked through the various release bulletins for Repserver Options (15.1, 15.7.1 SP100, 15.7.1 SP120) and all I can find are references to MSSQL 2008/2008R2 ... with earlier versions of RS (eg, 15.1) not supporting MSSQL2008.
The compatibility matrix tool (http://certification.sybase.com/ucr/search.do) also does not show anything higher than 2008/2008R2; w/2003 the highest supported platform for RS 15.1.
If you're talking about 2012 as a target database you may be safe as long as 2012 can work with the drivers that come with RS 15.1. As for using 2012 as a source ... *shrug* ... I wouldn't even want to guess at this point.
Sorry, I can't tell from the various documents if Sybase does not support MSSQL 2012, or if Sybase documentation is woefully out of date.
I would have to suggest contacting either Sybase tech support or your Sybase sales rep ... or wait for someone from Sybase/Repserver engineering/support to jump on this thread.

7.5 install hanging at Checking Server Components

hi all,
I am installing BPC 7.5 on Windows Server 2008, and the install hangs at the Checking Server Components section. We are utilizing SQL server and Reporting Services on another server. Any ideas?

When you performed the installation did you run the setp like Administrator?
Into Windows 2008 you have to specify this when you are running any application.
Regards
Sorin Radulescu

Sybase Replication Server install hanging

Similar Messages

Maybe you are looking for