Syced warning

when I plug in my I pod I get a warning (The Ipod " " is synced with another Itunes library?

Odd. Somehow iTunes thinks the iPod is linked to another library. Did you switch it to manual mode and then back again perhaps?
At any rate, if the library you are connecting the iPod to is the one you use, there is no harm is saying YES to sync the library back to the iPod other than it might clear the iPod first then redownload everything over again.
Patrick

Similar Messages

On itunes everytime I try and play a track the warning 'the song could not be played because the original files could not be found' please can anyone help me? Thanks

Hi. I have been having problems with my PC and recently removed a lot of rubbish to clear it somewhat. I dont know if that is relavant however on top of that I have just received my replacement iPad2 which i had a proble with and thought I would just tidy up my tunes before sycing. The problem is that everytime I click to play a track in iTunes on my PC, whilst the track is showing on my itunes, it comes up with a warning 'the song cannot be used because the original file could not be found. Would you like to find it'. I have tried clicking 'locate', but all that appears is 'music Library' 4 different dates. Help i am very confused, can any shed any light on this
Thank you

Sounds like you have somehow moved your itunes music library to a different location to where iTunes thinks they should be. Your music should be in a folder called "iTunes Media>Music". If they are located there, try going into iTunes, right clicking on one of the songs and then "get info". When the box pops up, on the first screen it should give a location line where it thinks the music is located. If it is differen't to where you music is stored, try and match it up to the location line that was in the "get info" box.

Removing Resolution Warning?

So I've bought an Apple mini-DVI to video adapter so I can use front row on my TV. One caveat - when I try to use any photos in front row, it will hang indefinately because iPhoto will open and display a warning that my output resolution is too low. No kidding... it's connected to a 10 year old TV. So I was wondering if there was any possible way to disable this warning permanently so I can use front row without having to get up and close the warning every time.
Thanks!
-Chris

Output resolution too low...of the decade old boob-tube, huh? It's a shot in the dark, but apparently the resolution of the TV isn't compatible with the hardware/software mix.
I've never tried it, but perhaps resizing the images to a lower resolution might help? Maybe make a smart album of a test set of images. Dupe them and resize them to, what? 36ppi or something. Give that a shot?
Hope that helps!
Scott

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Warning message in ALV report

Hi Experts,
In ALV report i am getting warning like
" Field string LS_HEADER is not referenced statically"
Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
How to correct this warning message.
Thanks in advance.
Thanks,
Madhu.

Dear Madhu,
You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
Regards,
Naveen

Warning message in BW Report through Portal

Friends,
I really need your help to remove the waring message.
For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds Centers
Issue:
When we open the old report we see the following information message.
" Value if variable ZCCTRAT1 is automatically converted
I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
Can u help me how to remove this ?

Hi Manohar,
Edit to add: Here I assume you have a Web Application Designer (WAD) report.
You can suppress system and warning messages in WAD. Try this and see if it helps.
- Go to your WAD report
- In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
- Click Web Item
- Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
Hope this helps,
Regards,
Petter
Message was edited by: M Petter

How to disable IE Security Warning on opening a "local" visio file with Visio Viewer ActiveX?

Hello all,
Everyone knows that Microsoft released ActiveX based Visio Viewer for free and allow the users to open Visio drawing and view/print via IE browser.
The problem that I am facing is that some users are complaining about IE browser's security warning on "active content to run in files on My Computer".
It means that opening .VSD files from the network, internet, intranet would be all OK but if the user wants to open .VSD files from the local hard drive (or open it as a mail attachment, which will extract it to a temp folder), it prompt the user to select "Allow Blocked Content" EVERYTIME they open them.
I know that I can GLOBALLY disable this warning by going through Tools - Internet Options - Security section and enable "Allow active content to run in files on My Computer" but I hope that there is a way (or workaround) to allow them by file type or location, etc.
Questions:
1. Is there any way to disable those warning for all .VSD only while we still UNCHECK the option on Internet Options?
2. Is there any 3rd party Win32 based viewer which wouldn't have those restriction?
3. Is it safe assumption that McAfee VirusScan and Host IPS protection is sufficient enough to remove the IE's security warning feature?
Thanks in advance?
Young-

Are you able to host/launch the VSD file via an HTM page? In that case you can format the HTM page as shown below. This will trick IE into thinking it is loading the file off of a website. Commonly called 'mark of the web'.
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html>
</html>

HT204406 I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out.

I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out. Help!!!

Where are iTunes files located?
No, I do not mean just the music. Copying just the media/music files or the media folder creates problems.

My safari isnt working. Everytime i open it it gives me a warning and then it immediately closes. How do i fix it?

i need help

What is the warning message you receive? What model Mac do you have and what OSX are you running? Please provide more details.

XML Publisher Report Finished in Warning 11i EBS HRMS

Hi there
I have developed XML Publisher Report using Developer 6i Data Module, this report works fine for specific sets of records. but When I run this report for All Companies This Report Finished in Warning.
Note: XML Data is generated in this report I can see the XML Data in explorer.
This report is for Oracle 11.5.10.2 (HRMS)
Oracle XML Publisher 5.6 Build 45
++++++++++++
AND When I load this XML file into Template at MS Word, I loaded Successfully and When I try to get the PREVIEW, I GET the following ERROR
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: M:\ATCO\Disco\Employee Profile Report\Defect\119\XXPEREMPPROFILE4.xml
FOProcessor setLocale: en-us
Regards
ASIM

Is the XML file Complete with all tags closed? Issues with Oracle prevent the completion of the XML file. It truncates in between and hence is not parsed successfully by the XML Template.
Also, try setting the following to 'TRUE' under XML Publisher Administrator>Administration Tab
1) Use XML Publisher's XSLT processor.
2) Enable scalable feature of XSLT processor.
3) Enable XSLT runtime optimization.
Thanks, Naveen Gagadam.

Using a family members iPad with my apple ID to watch a tv show I have purchased on my brothers device - get 90 day download warning - why?

I live in Texas and am visiting my family in Georgia. I didn't travel with my iPad as there are 4 at home I can use. I sign my brothers Apple ID out in the iTunes Store sign in as myself and attempt to watch a tv show I have purchased and get the for 90 days you can't download anything form iTunes to this device with a different apple ID warning. Why can't I just stream this tv show on my brothers device since I have purchased it on my device and am logged into iTunes on my brothers device with my apple ID? What a pain in the as?.

First of all would not be streaming the show on his iPad, you would be downloading a purchased item on his iPad for free. And it is something that was not purchased with his ID. It was purchased with your ID. I believe that Apple does that to prevent users from giving each other purchased content without buying it on their own. That's my take anyway.
You can read about associating a device with another iTunes account here.
iTunes Store: Associating a device or computer to your Apple ID.

Error message into warning message KO450

Hi,
There are unsettle RA value in project PAD-9114. Because of this unsettle RA value in the project we are not able to close the project and receiving error message like below:
1.There is still WIP for wbs
2.Balance of wbs is not zero.
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
How to change above error message into warning message so that it will allow us to close the project.
With regards,
V.krishnamoorthy

Hi,
Thanks for your answer. But still i am receiving the same error
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
With regards,
V.krishnamoorthy

Report "completed with warning "   APP-FND-00500: AFPPRN received a return

hi ,
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='200'
P_PO_NO_FROM='9068'
P_PO_NO_TO='9068'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 6098208
Number of copies : 1
Printer : wkwcomm
wkwcomm: service-unavailable
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.

Please post the details of the application release, database version and OS.
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
Is the issue with this report only?
Is this output from the printer that the report complete successfully with warning?
Do you get an output file?
wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

Error/Warning while validating a mapping

I'm using OWB version 9.2 and database 9i.
I have few major problems in OWB. We have stage and star schemas on the same database instance. The source system is on a different database instance. There are database links created between target instance to source.
I have about 20 mappings; all validated, deployed and executed successfully about 2 weeks back.
Beginning of this week I logged on to OWB and tried to make some changes to one of the mappings. Before I made changes I tried to validate the mapping and I got following warnings:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
When I click on "View Details" it says I need to reconcile outbound of the staging table.
When I have not made any changes to the mapping why do I need to do this? I want to know under what circumstances do we get this message?
Another weird thing is I validated the mapping, after 15 minutes I tried to deploy this and still got the above warnings, although I had reconciled outbound and successfully validated the mapping. Am I missing something here?
Another problem is I have a mapping which loads a dimension from staging table. Very simple basic mapping all it does is dumps from staging table to dimension and key is generated by sequence generator. Both stage and star schemas are on the same database instance. When I try to validate this mapping it gives me error:
"VLD-2769: Database link is not allowed for data target <DIMENSION_NAME>" and when I click view details it shows following:
"Loading of data across database link is not supported. Deploy this mapping within the same database instance as the actual target and remove the database link access specification from the physical configuration of this data target operator."
I have not specified any database link or schema name in the mapping configuration; both stage and star schemas are on same instance. Although there are two instances that it works fine. First if I provide the schema name in the mapping configuration it gives me warning but deploys and executes fine. Secondly if I go to deployment manager, select the mapping and click deploy it validates successfully. Why do I get this error when I validate in the mapping editor?
I never had these problems before; all the mappings were validated, deployed and executed successfully.
I would like to know where/what could have gone wrong? Could any of you point me in the right direction? Any help would be greatly appreciated.
Thanks

hi.
ok look i also had this errors:
"VLD-1008: Referenced mapping column <COLUMN_NAME> does not exist"
"VLD-1003: Reference <COLUMN_NAME> between mapping object and repository object does not exist".
this errors could be due to that something has change in the source database, in this case could be that somebody change the name column since the last time you did the load.
A possible solution is that you open the mapping (edit) and reconcile the tables both the table "from"(where the table came) and the table "to"(the table destination).
ooh and check the source system for any table that has changed, if it changed, so you have to load again the table.
bye

Folder Warning, iPod not recognized by Windows or iTunes

Okay. My other computer froze up while the iPod was in "do not disconnect" mode, and I simply could not get it to shift out of that, so, I disconnected it.
Still stuck in that mode, even after being disconnected, so I reset it (held down the menu and select buttons), which apparently put it into disk mode. I can't access any menus, play any music, anything like that. All I get is the Apple logo and an icon of a folder with a warning triangle.
I've tried connecting it to my computer - Window's won't recognize it, and it doesn't show up in iTunes, just makes iTunes freeze. While connected, it goes back into "do not disconnect" mode, but as I can't eject it from Windows or iTunes, I have no choice but to simply pull the plug, at which point it then gives me the check-mark "okay to disconnect".
I've tried repeatedly to reset it with the various menu-select-play button combinations. I have tried letting the battery die and then plugging it back in. The troubleshooting guides here on Apple.com suggest Restoring it, but as iTunes (the newest, most updated iTunes) won't recognize it, I have no options or menus within the computer to choose to restore it.
Help?

Okay. Thank you for your continuing attempts to answer my problem. The iPod is already in Disk Mode, though I'm not sure this is really the mode I want to be in, as neither of the computers in my house are recognizing it. I tried the iPod Reset Utility, but it too sits there with a greyed-out "Reset" button as if no iPod is connected.
I have taken a look at the iPod Service site, but as mine's a bit older and not under warranty, it would appear that I can't get free service directly officially from Apple. I'm going to try talking to people at the local Apple Store, if their Genius Bar schedule isn't all booked up.
Thanks again, and if anyone has any more ideas, I'd appreciate them.

Syced warning

Similar Messages

Maybe you are looking for