SYCLO INSTALLATION PRE-REQUISITES and Procedure

Hello guys,
                i am now starting a new mobility enhancement on SYCLO. Since i am new to SYCLO i googled some of its concepts and my primary concern is to configure Syclo in our Enterprise Landscape. so  i want to know about the pre-requisites like :
1.what are the ADD-ONS need to be installed for  syclo.
2-how Agentry mobile platform is integrated and built.
3-how Syclo's Agentry Editor is worked nested with Eclipse Development platform and installation procedure.
4- some more concepts on SMP 2.3.
                                   so guys help me regarding on this SYCLO work-shop.
Thanks
ashish satapathy
Tags edited by: Michael Appleby

I am also new to syclo and so far i have come across these add-ons to be installed at ERP system.
SMFND 610_700
SMERP 610_700
Ref: Re: How to do app configuration in SAP ERP system for Agentry development
Regards,
Jitendra

Similar Messages

  • Pre requisites and steps for BI content installation.

    Hi ,
    We need to install Complete BI content in our production system , I am aware of the steps to be exeuted in SPRO but wanted to know the complete procedure step by step .
    1) what are the pre requisites and checks before and after doing activation in SPRO .
    2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue .
    3)Can we do activation directly in Production ?
    Thanks,
    Neetika.

    Hello Neethika, for your second question
    2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue
    If the object which you are going to install is already active and if it is customised, and if you go for reinstallation, new standard object will reinstall the already customised existing oblect. However, if you select the check box MATCH (X) or COPY and do the installation, object will be activated with retainging customisation. so there will be no need to customise it again.
    It is always recommended to go for manual collection of objects rather then automatic collection, because there might be wierd chances that all the objects might not get activated and this will cause a problem while you move the same from DEV to PRODUCTION.
    feel free write if any further clarication need
    Thanks

  • Mcod installation pre-requisites

    Dear All,
    I am about to install MCOD system. ECC6.0 is already installed on the host,
    Now It is needed to install CRM 5.0 on to the same host and same database oracle.
    Could you please let me know what are the pre-requisites we take before i start the
    CRM installation.
    - Do we have any effect on to the existing env. variables because i have to start
    installation from the same host -root user
    - Do we need to take any special actions for the listener configuration?
    - I got through from Inst guide , we need to increase the free space in SYSTEM tablespace
    if you can provide any other pre-requisites, It will be greatful for me.
    Thanks and Regards

    > I am about to install MCOD system. ECC6.0 is already installed on the host,
    > Now It is needed to install CRM 5.0 on to the same host and same database oracle.
    Are you really SURE you want to do that? MCOD has more drawbacks that pro's.
    - Database maintenance requires both systems (ERP + CRM) to be shut down
    - system copies using backup/restore are always done for both systems (can be tricky)
    - in case of a logical error you have to reset both systems (imagine that in your ERP!)
    I would install a separate Oracle software and use a second ORACLE_HOME to separate both instances from each other. The only cost of that is local harddisk space for the Oracle software.
    Markus

  • Pre-requisites and steps for uploading chart of accounts in sap r/3

    Hi,
    I am a fresher in SAP FI. I have a completly new set of Chart of Accounts which i need to upload in the system. How do i do it and are there any pre-requisites for the same i.e variants to be defined and assigned completly before uploading the Chart of Accounts.
    I have heard of LSMW , but then how do i use it can anybody help me on the same.
    Thanks
    Poornima

    Hi,
    Yes, you need to define first the chart of account name and it should be assigned to the company code in OBY6.
    Please refer below thread:-
    [Upload Chart Of Accounts - Indian Localisation;
    Regards,
    Gaurav

  • Pre-requisites and steps to configure ChaRM and SDA

    HI ,
    We are implementing the Solman EHP1 with configuration of ChaRm and SDA , I need pre-requisite to configure ChaRm and SDA . Request your help on this .
    Thanks,
    Om

    hi,
    best way to start charm using this forum
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    and other related links for charm scenarios are here on this wiki
    http://wiki.sdn.sap.com/wiki/display/SM/WeblogsrelatedtoSolutionManager check out the below topics
    Change Request Management scenario: Usual questions
    Change Request Management scenario: Working examples
    Change Request Management scenario: Working examples "Development without Release" phase
    Change Request Management scenario: Working examples "Development with Release" phase
    Change Request Management scenario: Working examples "Test" phase
    Change Request Management scenario: Working examples "Emergency Correction" phase
    Change Request Management scenario: Working examples "Go-Live" phase
    Change Request Management scenario: Working examples "Being Completed" and "Completed" phase
    Change Request Management scenario: Working examples Final Points and Appendix
    Thanks
    Jansi

  • Oracle BI Installation Pre-requisites

    Hi,
    I am working on a fresh installation of the Oracle BI Components. I had a quick question in this regard - Do we need to install the Oracle Client s/w before installing the BI components?
    Thanks.

    If you install Oracle BI Applications you need a oracle client, because you want to install the DAC repository, informatica repository and datawarehouse tables as well, so you need database connectivity software
    If you only install OBIEE you don't need a database. Everything of OBIEE is filebased.
    However if you want to connect to an oracle database (because you want to query on that) then you need client software, but you can install this afterwarts as well...
    succes,
    Remc0

  • Oracle Universal Installer not starting, failing on pre-requisites

    --[This is where the application server 10g Forms and Reports (9.0.4) cd resides for Solaris version 5.9]
    /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS
    --[The runInstaller is using oraparam.ini from the following temp location (/data02/FMSinvoice/appsFR904...). This is a patch which allows above cd to run on Soalris ver 5.10]
    bash-3.2$ runInstaller -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/oraparam.ini
    Debug1
    encoding = UTF-8
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
    Checking swap space: must be greater than 1536 MB. Actual 14791MB Passed
    Checking Temp space: must be greater than 150 MB. Actual 12596 MB Passed
    All installer requirements met.
    Checking if CPU speed is above 250 MHz. Actual 1200 MHz Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-29_03-54-34PM. Please wait ...sh: /apps/oracle/product/9.2.0/oui/bin/unzip: not found
    Error in writing to directory /tmp/OraInstall2012-08-29_03-54-34PM. Please ensure that this directory is writable and has atleast 75 MB of disk space. Installation cannot continue.
    The tmp seems to have enough space...
    bash-3.2$ df -kh
    Filesystem size used avail capacity Mounted on
    /dev/dsk/c3t201500A0B826A22Cd4s0
    9.8G 5.2G 4.6G 54% /
    /devices 0K 0K 0K 0% /devices
    ctfs 0K 0K 0K 0% /system/contract
    proc 0K 0K 0K 0% /proc
    mnttab 0K 0K 0K 0% /etc/mnttab
    swap 12G 1.7M 12G 1% /etc/svc/volatile
    objfs 0K 0K 0K 0% /system/object
    sharefs 0K 0K 0K 0% /etc/dfs/sharetab
    /platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
    9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/libc_psr.so.1
    /platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
    9.8G 5.2G 4.6G 54% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
    fd 0K 0K 0K 0% /dev/fd
    /dev/dsk/c3t201500A0B826A22Cd4s3
    9.8G 409M 9.3G 5% /var
    swap 12G 1.0M 12G 1% /tmp
    swap 12G 80K 12G 1% /var/run
    /dev/dsk/c3t201500A0B826A22Cd4s4
    9.8G 4.6G 5.2G 47% /apps
    /dev/dsk/c3t201500A0B826A22Cd0s5
    128G 73G 53G 58% /data01
    /dev/dsk/c3t201500A0B826A22Cd1s6
    262G 13G 247G 5% /data02/FMSinvoice
    Can someone help kick off the OUI installer. Our customer if getting impatient in not getting it to run. Any help appreicaited
    Thanks

    Thanks for the replies...
    FYI.
    I have cloned an Oracle 9i database on a DR test server.
    Now I am installing Oracle Application server 10g Forms and Reports (9.0.4) on Solaris 5.10
    This is using a Oracle CD which is for Solaris 5.9 but using twp patches supplied by oracle to run the CD from. So it is able to run on Solaris 5.10. It has been done before but by some past DBA some 5 years ago. This is the first time I am attempting this being a new employee here.
    I have implemented these suggestions.
    Especially the fact that it was looking for a gunzip utuility which it couldn't find. To make it easirer Ij ust copied the gunzip utility to the place it was looking for, and renamed it unzip. As it was loooking for unzip
    This worked and passed through.
    Created the temp temp directory as welll so it would not have issues in not writting to the tmp directory.
    The error I'm getting is below
    bash-3.2$ pwd
    /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701
    bash-3.2$ /data02/FMSinvoice/appsFR904/INSTALL/SOLARIS/RUNINSTA -paramFile /data02/FMSinvoice/appsFR904/INSTALL/ForSolaris5_10/4494701/ORAPARAM.INI
    Starting Oracle Universal Installer ...
    Checking requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10.
    Actual 5.10 Passed
    Checking operating system packages: SUNWarc,SUNWbtool,SUNWhea,SUNWlibm,SUNWlibms,SUNWsprot,SUNWtoo,SUNWi1of,SUNWxwfnt,SUNWi1cs,SUNWi15cs Passed
    Checking swap space: must be greater than 1536 MB.
    Actual 14791MB Passed
    Checking Temp space: must be greater than 150 MB.
    Actual 252715 MB Passed
    All requirements met.
    Checking if CPU speed is above 250 MHz.
    Actual 1200 MHz Passed
    Checking monitor: must be configured to display at least 256 colors
    ^C Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo
    Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n] y
    Preparing to launch Oracle Universal Installer from /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM. Please wait ...The Java RunTime Environment was not found at /data02/FMSinvoice/appsFR904/tmp/OraInstall2012-08-31_11-12-17AM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
    : No such file or directory
    I am running humingbird Exceed, and have also set the DISPLAY to my screen.
    FYI I am running this from home so the 256 collours error would probably be ok if I did it from work (as I will on Monday)
    However I would prbably still get the java error. Should this not be resolved using Exceed though?

  • 11g and Coherence (pre-requisite?, included?)

    We are planning to work with SOA Suite 11g for a mid scale project.
    From the download's site it looks like Weblogic + Coherence "package" is a pre-requisite.
    However we see licencing issues as we did not purchase any license for Coherence.
    Is Coherence a Formal Pre-Requisite for SOA Suite 11g and/or OSB (service bus) 11g ?
    Some people on forums suggest Coherence is "included" in SOA Suite. Would this be the case from the licensing point of view (i.e. licence for SOA Suite / OSB gives us the right to use Coherence without paying separately ?
    Last not least, can we install SOA Suite with Weblogic only (no Coherence), even if the download page indicates we should have the Weblogic + Coherence package in place ?
    Many thanks,
    CL.

    Hi
    1. I am not much familiar with Coherence License stuff. As far as I know, Coherence is used for Caching Framework and is part of the Weblogic Server and it may not have anything to do with SOA Stuff. BUT incase if internally SOA files uses Coherence APIs for Caching, then you may need this component also installed.
    2. YES, you can install WLS without coherence. Even though your installer has WLS + Coherence, at the time of installation of WLS, choose the option like Custom (instead of default Typical). In the following screens, you can UnCheck the boxes for Coherence (and its samples). So you get only WLS installed. On top of this install SOA. Create a SOA Domain. Start admin and soa servers. If they start fine without any errors referring coherence APIs, then you are good to go.
    Thanks
    Ravi Jegga

  • Pre-requisite checker script for EBS R12 and R12.1

    hi
    is it possible to make a pre-requisite checker script (in perl or shell) for EBS R12 and R12.1 in RHEL5 or sun OS??
    can anyone help / guide me to do so??
    rgrds

    I don't know about EBS R12, but apparently the Oracle Universal Installer can use options to just run the prerequisite checks without having to install the product.
    E.g. /runInstaller -prereqChecker or -executeSysPrereqs
    There is also a specific OTN forum available for installing E-Business suite:
    LCM: 11i Install/Upgrade

  • Pre requisites for AIX Installation for NW2004s

    I need to install NW2004s in AIX Machine with Oracle Database
    the hardware team is in the process of  installing the AIX Machine af of now.
    Pls let me know if any other pre-requisite has to be followed as a part of installation

    Hi Balaji,
    Pls check the AIX version and patches if any are required for NW2004s installation.
    so pl refer http://service.sap.com.pam.
    Then follow the installation guide that you must have with you for further activities.
    Hope this is useful
    Regards
    Umesh

  • Pre-requisite ARIS installation

    Hi,
    I want to know in order to work with ARIS what all software u need to install or wat are the plugin required??
    currently i m working on SP 14
    pls let me knw the all pre-requisite required for ARIS installation
    Thanks in advance

    Hi Anu,
       Please go through the below link.. It has all the details related to ARIS and ARIS for Netweaver..
    http://www.ids-scheer.com/international/english/products/aris_implementation_platform/49637
    Hope this helps you..
    Please award points if this is helpful..
    Regards
    Kiran..

  • Win2000: Installer quits during "Executing pre-requisites..."

    Hello all. I tried to install Oracle 8.1.7 on Windows 2000
    Advanced Server (w/SP2) and every time the installer just quits--
    no error message, nothing, the window just disappears--after
    choosing the type (Typical, Minimum, Custom), about 30% through
    the status bar when it says "Executing Pre-requisites...".
    Since didn't have much luck with that, I went ahead and
    installed Oracle on a Linux machine. Now I get the same problem
    when I just try to install the Client on Windows 2000. After
    choosing the type of client (Admin, Programmer, etc) it starts a
    status bar, and the installer just disappears after it gets
    to "Executing Pre-requisites..."
    Anyone have any idea what's going on here? This has actually
    occurred on two different Win2000 machines here. The only common
    factor I could see was that both of them had been upgraded to
    Internet Explorer 6. So I installed an old 4.7 versino of
    Netscape and tried again but had the same problem.
    Thanks a lot.
    --Dan

    Hello All,
    I got the same problem when installed Oracle8i with Intel
    Pentium 4...So I thought that Oracle8i did not support Intel P4
    at all...In fact, they did not support P4 in this time....If
    anyone figures it out..please share big references...
    Regards,
    -- Jerry --

  • What are the System pre-requisite for the BODS installation(SAP Data services)

    I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

    Hi Siddhu,
    Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
    Tutorial: How to install SAP Data Services 4.2 - Part 1
    Regards
    Arun Sasi

  • Pre requisits for Internation HR and Payroll Setups

    Hi All,
    Can any one help me in Pre requisits for Internation HR and Payroll Setups.
    Thanks in advance.

    Here's some stuff to get you started:
    International HR and Payroll (Doc ID 261452.1)
    Running International HR and Payroll Setup (Doc ID 278006.1)
    HOW TO ENABLE ENHANCED RETROPAY FOR INTERNATIONAL HRMS PAYROLL SETUP (Doc ID 458535.1)
    If you have specific problems, please give full details of what they are and error messages (etc) and I'm sure someone can help further.

  • Pre-requisites for RFID and XI

    Hi
    Could any explain me what is XI, RFID and MDM and there relationship. Also what are the pre-requisites to learn XI and RFID?
    Regards
    Rak

    Hi,
    SAP XI (Exchange Infrastructure) - Process level integration for various components.
    RFID (Radio Frequency Identification) - A means of identifying a unique object or person using a Radio Frequency Transmission.
    MDM -SAP NetWeaver Master Data Management ensures cross-system data consistency through interactive distribution. It integrates business processes across the extended value chain, delivering features and functions.
    Thanking you
    Boopathi Thangavel

Maybe you are looking for