Syincing error message "Cannot find required disk" - Help!
I have a third gen 4gig nano that I got at Christmas. I added two CD's onto it when I got it. Now, however, I'm having trouble syning anything else - that's all I've been able to put on it are the two CD's even though I've added more into my library. I keep getting the error message "Cannot find required disk". Can anyone help me or tell me what I need to do?
Thanks in advance!
Even though you're not getting a -50, I'd check on the following document. (Your message is one of the possible symptoms of the problem outlined in the document.)
iTunes displays -50 error message when syncing iPod on Windows XP
Similar Messages
-
Bearts Audio Control Pannel will not open. Get error message cannot find startup file
Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500ZHi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Dear Sirs, I try to import budget header and budget line by using DTW, however error message found, "Cannot find this object in B1 application defined, object defined error 65171. Regards, Saw Hua
Hi Javier,
Please check below links.
DTW Error 65171
DTW error 65171
DTW, Unkonwn error 1005!65171
DTW error 65171 - Cannot find this object
DTW error65171
SAP B1 Data Transfer WorkBench : Data too large... | SCN
Hope this help
Regards::::
Atul Chakraborty -
Error message Cannot find mozilla run time
When trying to access Firefox on my PC get message Cannot Find Mozilla Run Time. OS Windows XP
hello gwojcik, can you test if the problem is still there after a clean reinstall:
*download the full firefox setup file from getfirefox.com
*uninstall firefox on the machine
*manually delete all remaining files in the firefox program folder, which usually resides in ''C:\Program Files\Mozilla Firefox\''
*reinstall firefox -
Error message, Cannot find iTunes Connect user
I cant access my I tunes from my Iphone, I get the following. Authentication Error. Cannot find iTunes connect user (2002)(2002)
Hello wallydt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Best of luck,
Mario -
Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
MarlenHello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks. -
Firefox V4 opens Windows error message "Cannot find...."
I updated Firefox to version 4. Now, every time I open Firefox a Windows Error popup appears stating...
Windows cannot find
'https://login.yahoo.com/config/login_verify2?.intl=us&rand=832809823&i=IWZkZHNKIXRzZnNydEpidXV4dSF0ZEqOZHh4fH5iU356YmNYcnM%3d&.src=ym'
In spite of the error message, Firefox proceeds to open normally and takes me to Yahoo.com. Closing the error message has no affect pro or con...so, the message is merely a nuisance. I've tried everything I can think of to permanently remove it with no success. Running a deep scan to find out if it is a virus didn't find anything. Am using XP Home edition. By the way, I get a similar Windows error message when I try to open GMAIL, and Firefox then opens my GMAIL account. Weird.
Am hoping someone can tell me how to prevent these messages from appearing. Thanks in advance!Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
Error message: cannot find flash.ocx
After receiving a POP UP for a free Adobe Flash Player I
choose to install it. Since then I get at least 50 POP UP messages
saying the same thing..(I have to "X" out of them to continue
processing) "Cannot find flash.ocx" - how do I either fix it or
delete it.This has been a problem for quite a while in our company and it's pretty much an everyday occurrence.
We have around 500+ that get the exact same error: cannot find flash.ocx
The work around we use is to copy the Flash.ocx file from one PC that still has it and paste it into the C:\WINDOWS\system32\Macromed\Flash directory of the PC that has the problem.
In our case renaming the current updated file Flash10d.ocx to Flash.ocx also works but this may not work for you.
Now the two work arounds above are fine but as soon as adobe has an update the file is once again replaced with the latest updated file! And you have to perform the work around again.
You can see what the update does by looking at the install.log file located in the same directory. It’s just a text file so you can view it in Notepad C:\WINDOWS\system32\Macromed\Flash
Bellow is a snipet of log file:
IfFileExists: file "C:\WINDOWS\system32\Macromed\Flash\UninstFl.exe" does not exist, jumping 948
IfFileExists: file "" does not exist, jumping 952
Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash.ocx"
Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash6.ocx"
Delete: "C:\WINDOWS\system32\Macromed\Flash\Flash6a.ocx"
The bellow does not work but interesting at that:
I did try editing the screen saver file directly to point it to a different directory, in which I would then place the Flash.ocx file but unfortunately although the .scr file can be viewed in Notepad, making a change to the file will destroy it. Please make a backup of the file first if you want to see whats inside. You can use Ctl + F to search for Flash.ocx etc..
Although not really a hindrance in day to day work screen burning could potentially be an issue!
Hope this helps someone.
Thanks,
Simon -
Error message: cannot find browsers plug in directory
I am trying repeatedly to install flash player 9. I have
installed from the web site, I have down loaded the installer file
and ran that. I have downloaded the uninstaller, ran that,
rebooted, reinstalled from the web site, rebooted and still
nothing. I keep just getting white blank boxes. this is so
frustrating. When I run the downloaded installer it keeps coming up
with an error message that says flash player cannot detect your
browsers plug in directory. I don't know where to install the file
to, i don't know where the browsers plug in directory is. help
pleaseHello Ian,
From what I understand, this problem occurs because of the fact that DSC loads some DLLs dynamically in some of its VIs. Since they are loaded dynamically (instead of having concrete search paths), it takes LabVIEW a while to find them...if it takes too long, you will receive the error you mentioned.
From what I understand, this problem does not occur in the 6.1 version of the DSC module. If you are still using 6.0.2, the simplest workaround for now is to use the File >> Open option in LabVIEW instead of double-clicking on the LLB.
I hope this suggestion helps. Good luck with your application.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
When I try to sync my ipod it tells my cannot sync ipod because itunes cannot find the required disk. We get this error on my new 5th generation nano and my husband's 2nd generation nano, so I assume it is a computer problem. We have recently reinstalled itunes but that did not fix the problem.
Post in iTunes forum for Windows.
http://discussions.apple.com/category.jspa?categoryID=150
- You'll feel right at home, with other users having the same and similar issue. -
[ME21] error message : cannot find message associated with key
Dear all,
I try to develop an Mobile application using smartSync,
but when the application running (on client) got an error message :
Error: 500
Location: /UPLOAD_TEST/upload_testapp/Menu.do
Internal Servlet Error:
javax.servlet.ServletException: cannot find message associated with key : dispatcher.forwardException
at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:238)
at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:423)
at 0002findex0002ejspindex_jsp_0._jspService(_0002findex_0002ejspindex_jsp_0.java:62)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java)
note:
when create this application, I'm using tcode : merep_sbuilder
Sync type : U01 - Upload using SMAPIs
Bapi wrapper : MEREP_CONTACT_CREATE
SAP Mobile Engine 2.1
and generate .war file using MDK tool
any one know about this ??
thanks & regards,Hi,
this error comes up when the destination serlvet throws an exception other than ServletException!
Its a standard tomcat bug!
Rgds Thomas
-->
http://issues.apache.org/bugzilla/show_bug.cgi?id=19114
-->From apache.org:
When a forwarded servlet throws an exception other than ServletException or
IOException, the thrown exception is lost. This is due to the line:
throw new ServletException(sm.getString("dispatcher.forwardException", t));
(found in org/apache/tomcat/facade/RequestDispatcherImpl.java:210)
the earlier catched t is here not passed into the constructor of
ServletException but into getString.
To reproduce construct a servlet that throws an Exception (other than
ServletException and IOException) and another servlet that forwards to it. You
will get just a forwardException (if you have the proper locale strings
installed!) but the originally thrown exception will get lost forever. -
Why songs dwnlded have ! and error message cannot find file?
Why do some of the songs downloaded from other places than itunes are listed in itunes but cannot find the file? Where did it go? Please help!
Hello Ian,
From what I understand, this problem occurs because of the fact that DSC loads some DLLs dynamically in some of its VIs. Since they are loaded dynamically (instead of having concrete search paths), it takes LabVIEW a while to find them...if it takes too long, you will receive the error you mentioned.
From what I understand, this problem does not occur in the 6.1 version of the DSC module. If you are still using 6.0.2, the simplest workaround for now is to use the File >> Open option in LabVIEW instead of double-clicking on the LLB.
I hope this suggestion helps. Good luck with your application.
Sincerely,
Darren N.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
HT201210 getting error message cannot restore ipad disk space full ???
cannot restore the ipad its locked up and I am getting an error message that says cannot restore ipad disk space full what to do?
thanksWell you are going to have to delete something to make room
-
Can someone tell me whats going wrong when I manually sync my iPod with computer only 2 songs transfer to my iPod then I get error message ' unable to read/write disk ' the 2 songs are transferred to iPod and I have to keep starting the process over again, what can I do?
First, try shutting down (powering off) your computer and resetting the iPod
http://support.apple.com/kb/HT1320
Start up the computer, and connect the iPod to a direct USB port on the computer, if you have been using a USB hub. If there are other USB devices (other than standard keyboard/mouse) connected, you may want to disconnect them, as a test.
If that does not help, or you already did that, it is possible that the iPod's hard drive has become faulty. It is also possible that the hard drive is OK, but there is data corruption that is making the iPod's storage unreliable.
If the problem is not resolved, you should probably do a Restore on the iPod in iTunes. The Restore button is on the iPod's Summary screen in iTunes. This will erase the iPod, reinstall its software, and set it to default settings. If the cause is data corruption, the Restore (erasing the storage) should fix the problem. However, if the cause is a hardware fault on the hard drive, it will not help; the Restore may not complete successfully, which will leave your iPod inoperable. -
Error message - cannot find where its coming from
Hi Guys,
I have a default error message setup, and I need to get rid
of it for debugging purposes.
Problem is, I cannot remember where the template is coming
from.
Theres nothing setup in application.cfm. Is there anywhere in
cfadmin where it might be set?
I'm using CF 7
ThankyouMattastic wrote:
> Hi Guys,
>
> I have a default error message setup, and I need to get
rid of it for
> debugging purposes.
>
> Problem is, I cannot remember where the template is
coming from.
>
> Theres nothing setup in application.cfm. Is there
anywhere in cfadmin where it
> might be set?
>
> I'm using CF 7
>
> Thankyou
"Site Wide Exception" handler configured in the Administrator
most likely.
<cferror...> tags potentially embedded in your CFML
files.
Maybe you are looking for
-
EXCHANGE SERVER 2013, WINDOWS 2012 R2 NOT SUPPORTED?
The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers. For more information, visit: http://technet.microsoft.com/library(EXCHG.
-
Suddenly I can't drag files from explorer into audition anymore.
Hi any help on this would be greatly appreciated. I was having some trouble with my m-track ASIO interface drivers so I went through some steps to try and fix this, and made some changes to audition and windows 7. I made some changes listed here http
-
Pbm in updating delivery quantity and picked quantity in VL03N transaction
HI all, I m using the BAPI 'WS_DELIVERY_UPDATE_2' for changing the picked quantity in VL03N transaction. But this BAPI is not changing the picked quantity. Instead it add the old quantity with the new quantity what i mentioned in the ITEM_DATA (VBPOK
-
I just purchased some songs on itunes and they are not in my library. How do I get them into my library? Thanks.
-
I have a bunch of MIDI files that I want to be able to play in my java program. The problem is, I composed them using a program called Midisoft Recording Session, which plays them back with the sound bank provided by my hardware. When I play them in