Symantec Backup Exec SQL Agent & SBO 2007

Does anyone use symantec sql agent to backup their sbo db's?  Any cons/pros, negative/positive feedback?
or
Backup sbo db's in real-time using log-shipping or something similiar?

Hi Scott
Most customers prefer to just use the backup manager from SAP to create a Zip file and then write the zip file from its folder to their backup drive or device. I have one customer that is writing the backup straight from SQL to a tape drive. I would suppose it depends on your preferences and amount of time and manual intervention in the process. Best is usually to have at least a daily zip backup and write to tape drive at least once a week. It is always a good idea to have an "off-site" backup in case the server is stolen, etc.
You could use Backup Exec or even the standard Windows backup if it detects and supports your backup drive to backup straight form SQL.
As far as log shipping is concerned, most customers are set to simple recovery and prefer to take the risk while minimizing data space used. Best would be to check the documentation on the SAP Business One Portal for any guidelines in terms of SQL and backups.
Do you have any specific concerns, or database growth issues?
Kind regards
Peter Juby

Similar Messages

  • Back up MaxDB thru Symantec Backup Exec

    Hi everyone,
    I've just installed a 64-bit unicode SAP ECC 5.0 on MaxDB 7.5 in Windows 2003 x64 Enterprise.
    I am now trying to figure out how to configure Symantec Backup Exec 11d to work with MaxDB so that I can do online backups. I heard that it is directly not possible, but is there a workaround for this?
    Any help would be appreciated.
    Thanks,
    Joseph

    Hi Andreas,
    That was a very good document that you recommended. It is clear enough. But the thing is I don't think NetBackup is installed to the server. The SAP-relevant options licensed and installed by the vendor for Backup Exec 11d are:
    1. Agent for Oracle on Windows Servers
    2. Agent for MS SQL Server
    2. Agent for MS SQL Server 2000
    3. Agent for SAP Applications
    4. Backup Exec for Windows Servers
    5. Remote Agent for Windows Servers
    Do I have to install NetBackup or does it have a counterpart in 11d?
    Thanks again,
    Joseph

  • Symantec Backup Exec and Exchange

    My Exchange Symantec backup exec stuck on consistency check why ? ( i'm running backup exec 2010 R3, 1 Active exchange 2007 no passive one it's defected ) all were running good before getting problem with the second exchange server

    Hi,
    I recommend you should check if you configurate all the settings in backup exec correctly.
    In addtion, you can ask for help from symantec and check all the settings:
    http://www.symantec.com/support/contact_techsupp_static.jsp
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Exchange backup Issue with Symantec Backup Exec 2014

    https://support.symantec.com/en_US/article.TECH211305.html
    Have you looked at this article? Do you have the remote agent installed? I would see if there is updates for the agent as well( Right click the exchange server from your console and hit update).

    Hi,
    I am using Symantec Backup Exec 2014 software.  I want to take the daily backup of our Exchange database (Exchange 2013).  But I cannot add the Exchange database to the Backup process.
    I tried Add server wizard and connect exchange from the server wizard.  But both options are not working.  But I can take the backup of files that stored in the same server (exchange).
    Please help...
    Thanks
    KK
    This topic first appeared in the Spiceworks Community

  • Full HyperV Backup - Symantec Backup Exec (any version)

    I'm sure this will be a favourite topic, but I was wondering if anyone could shed any light on this situation.
    We have a customer which has Server 2008 R2 with a .vhd which is 1.46TB in size, and a fixed disk.  They have only 150GB spare on the drive which seemed like enough.  We have had an occasional full HyperV backup to tape, but almost every other
    day it fails with the following in Backup Exec (now 2014):
    "V-79-40960-38521 - Snapshot Technology: Initialization failure on: "VRTSRV::\\HG-2008-STD\Hyper-V?Virtual?Machine\HG-2011-SBS". Snapshot technology used: Microsoft Volume Shadow Copy Service (VSS).
    A virtual machine snapshot could not be created.  Use the Event Viewer on the Hyper-V host to identify the cause.  If the virtual machine is not properly configured, it may be necessary to use the Event Viewer in the virtual machine to identify the
    cause."
    In the Event log of the Virtual Machine itself, there is only one VSS error, of which I'm told I can safely ignore, but resolved anyway:
    "Error: NetLocalGroupGetMemebers(spfarm), 0x80070560, The specified local group does not exist."
    I also have the following error on the physical host each time I run the backup:
    "Failed to create the backup of virtual machine 'HG-2011-SBS'. (Virtual machine ID A5185ADC-F34B-4898-927C-784EBC23EA1B)"
    Symantec say it's the VSS writers (apart from one support technician who admitted their product was a joke) but then Microsoft say it's Symantecs issue.  I'm inclined to believe Microsoft in this case, but I'm getting nowhere and our customer isn't
    getting a reliable backup of their whole vhd.
    Is this due to only having slightly less than 10% free space on the physical host or just Backup Exec being its usual self?  Does HyperV REQUIRE that you have a certain percentage of space free on the physical machine to process?

    For further troubleshooting: what happens when Windows Server Backup is configured for the VM backup and ran?
    Lenora Moss Technical Support Engineer, SMB Partner Support, Symantec Corporation www.symantec.com
    Surprise surprise, it works just fine :-)
    Ok, I have resolved it (kind of)
    I was having ESE errors when the backup tries to run and fails immediately after. This points to Exchange VSS errors so leads you down the wrong path.  After hours of following false leads, I finally found that Sharepoint can bibizarrely create these errors
    after installing SP1 and not running.  I ran the following command:
    PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
    ...which resolved most of these errors, but I still got ESE Information Store Shadow Copy instance aborted errors.  At this point, I'm still thinking it's a corrupt Exchange store and/or logs, as suggested by Microsoft.
    Long story short, after much digging, I came across an article suggesting to check into SQL writer service permissions having to be local administrator, and not local system account, I decided to disable this service as BE is installed on a Domain Controller
    so doesn't have a local admin account to use as suggested in some articles.  All of a sudden, I was in business!!  ESE VSS events were logging successfully and I'm now performing a full image backup finally.
    Although this seems like a Microsoft issue, the fact that Veeam backed up fine, along with Windows Server Backup, does still point to BE.  I still don't consider this a resolution because had the customer actually used SQL on this Server (they just use
    SBSMonitoring and BE instances) there wouldn't be a backup of SQL available that can utilize GRT, but would have to perform maintenance plans and have those added to the backup routine for DR.
    Hope this helps anyone else having these issues.  I would also advise moving the logs manually within Exchange to another drive if you have already used the SBS wizard to move the actual database, as it doesn't move the logs this way.  I've seen other
    backup Software fail for this very reason but not give any hint as to what the issue was.

  • Symantec BackUp Exec License Issue

    Hey guys,
    I have a license issue with Backup Exec. I have the agent licenses as well as the server license for Backup Exec 2014. But the issue is on the next screen. It gives no options to select. Am I missing something??
    This topic first appeared in the Spiceworks Community

    Hey guys,
    I have a license issue with Backup Exec. I have the agent licenses as well as the server license for Backup Exec 2014. But the issue is on the next screen. It gives no options to select. Am I missing something??
    This topic first appeared in the Spiceworks Community

  • Cisco WAAS moibile integrated with Symantec Backup Exec 2010

    Here customer requirement is to take backup of opened Database file .fdb
    (Microsoft Dynamic Navision) integrated with WAN optimization (Cisco WAAS
    mobile).
    Problem is  Cisco WAAS mobile is not optimizing  Symantec backup process when backup job is running.
    Please find attached files (WAAS mobile accleration status with symantec
    backup process).
    Customer is using Microsoft Dynamics Navision (ERP application).
    WAAS mobile client is connecting and file copy is accelerating, but
    symatec backup (beremote.exe) and Navision (fin.exe) processes are not
    accelerating.
    I added above processes in WAAS mobile server's acceleration list.
    Please advise if any changes has to made in WAAS mobile server.
    Regards
    Prasad
    Cell: 9000012355

    Hi Prasad,
    According to the screen shots provided the fin.exe process is bypassed due to Low Latency.  From the admin guide this means:
    Bypassed : Low Latency. The latency between the client and the application server is less than the latency threshold, which is 10 ms by default. This threshold may be modified on the Connection Settings tab on the Configure > Clients > Networking page.
    Also, I see SERVER.exe process is going to the same server or subnet as fin.exe but is bypassed due to Pre-Existing connection.
    Bypassed: Pre-existing Connection. When WAAS Mobile is started after other applications, the existing TCP connections associated with those applications will not be reset unless the “Auto Reset Connection” property has been selected for the process in the Accelerated Processes table, and hence, these pre-existing connections will be bypassed.
    Lastly, I see bermote.exe is listed as Bypass Reason Unknown in one of the screen shots.
    Bypassed : Reason Unknown. This message will occur when an attempt to reset a TCP connection associated with an application that has been configured to have these connections be automatically reset (via the Accelerated Processes table on the Configure > Clients > Acceleration page) fails.
    Is this client actually accessing a server that is remote for these first two processes?
    For the last process, did we try to first exit the application in question and all the associated processes (beremote, and any other processes that may get started with this application), then start the WAAS Mobile client, then finally start the associated process/application?
    Cheers,
    Mike Korenbaum
    P.S.  If this answers your question please mark it as such.

  • Want to know about how to implement veritas backup exec unix agent s/w to take oracle8 backup

    we have got sun solaris7 on sun sparc machine. cirr

    What kind of problem are you having? I've used Netbackup for doing Oracle backups quite a bit without a problem. If you can shutdown the instances, just have a script do it before the backup starts. Usually, I do a cold backup on the weekends and then backup of the archive logs during the week to save tape space. Just stick in a little script to do a log switch before the backup starts to make sure you get the current changes. If you're running 24x7, you'll need to look at buying the RMAN module from veritas or roll your own hot backup script.

  • MP for Symantec Backup Exec 2014

    Hi
    I have a simple question - how to download it? 
    There is an article https://support.symantec.com/en_US/article.TECH224867.html but i cant found any download link
    none

    There is a link at the top of the article for "Attachments", that gives you a pop-up with a download link which is this
    https://symwisedownload.symantec.com/resources/sites/SYMWISE/content/live/SOLUTIONS/224000/TECH224867/en_US/Symantec_Backup_Exec_2014_MP_SCOM.zip?__gda__=1430119689_9dc814fb9bf441368a244f444174d65a.
    Does that answer your question?
     

  • Symantec Backup Remote Agent Failing

    Hello,
    N00b here. My IT Support at my company has Symantec Backup Exec 12 for Windows Servers setup to backup our Macs. Their saying on my Mac, the backup remote agent keeps failing. It fails randomly. Sometimes it will be working for 2 weeks and then all of a sudden it fails. He says he usually has to go into Terminal and run the following commands if the agent has failed to restart it:
    cd /Library/Startupitems/VRTSrams
    sudo ./VRTSrams start
    Can anyone help me to why it's continuously failing? If this is the wrong forum, don't shoot me.
    Thanks in advance.

    ~Bee wrote:
    Norton stuff has a glorious reputation for messing up Macs.
    This is not Norton the OP is referring to. This is the client for Symantec's BackupExec application...entirely unrelated to Norton. So please don't give false hope for software the OP is not even using.
    Now... Rockets4Life,
    What version of BackupExec are you running? We run 11d and 12.5 without issues on Macs, so you may want to look into upgrading if possible. However, we did see the same issue you're seeing on one of our Linux boxes and doing a Google search showed that it was a common issue among Linux installations.
    We remedied by configuring the Linux box to run a cron task every 15 minutes to run the RALUS startup command and it worked fine ever since. You may want to try the same.
    Also, you should also post your question on Symantec's forums, as if there is a definitive solution, you'll probably find it there: http://www.symantec.com/connect/forums

  • Oracle agent configuration on Linix (Backup exec)-HELP :(

    HI,
    Am trying to configure Oracle Agent on my RHEL 4
    I have created the password file:
    $orapwd file=orapwTEST password=password entries=5
    add REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE to initTEST.ora
    Restart the database
    SQL> SELECT * FROM V$PWFILE_USERS;
    USERNAME SYSDB SYSOP
    SYS TRUE TRUE
    ARIBKP TRUE FALSE
    BACKUP TRUE TRUE
    SQL> show parameter remote_login_passwordfile
    NAME TYPE VALUE
    remote_login_passwordfile string EXCLUSIVE
    SQL>Grant sysdba to backup
    SQL>grant connect to backup
    SQL>grabt create session to backup
    SQL>grant dba to backup
    GRANTEE     PRIVILEGE
    BACKUP     AQ_ADMINISTRATOR_ROLE
    BACKUP     CONNECT
    BACKUP     DBA
    BACKUP     UNLIMITED TABLESPACE
    Configuring the Oracle Agent
    Choose one of the following options:
    1. Add a new Oracle instance to protect
    2. Edit an existing Oracle instance
    3. Delete an existing Oracle instance
    4. View Oracle instance entries that have been added in the Remote Agent Utility
    5. Quit
    Please enter your selection: 1
    Select an Oracle instance to configure
    Entry 1. TEST
    Enter the number 0 to go back
    Enter your selection: 1
    Enter the Oracle database SYSDBA user name: backup
    Enter the Oracle database SYSDBA password:
    Re-enter password:
    Validating credentials.......
    Failed to login.
    Please help me ..
    Edited by: KSV.DBA on Mar 15, 2011 6:42 AM

    HI,
    SYMC BACKUP EXEC 2010 Windows server ...
    SYMC BACKUP EXEC 2010 AGENT For ORACLE
    Steps:
    cd /opt/VRTSralus/bin/
    ./AgentConfig
    SSymantec Backup Exec Remote Agent Utility
    Choose one of the following options:
    1. Configure database access
    2. Configure Oracle instance information
    3. Quit
    Please enter your selection: 1
    Configuring machine information
    Choose one of the following options:
    1. Add system credentials for Oracle operations
    2. Edit system credentials used for Oracle operations
    3. Remove system credentials used for Oracle operations
    4. View system credentials used for Oracle operations
    5. Quit
    Please enter your selection: 4
    Entry 1
    ObjectName: DBAID
    Port: 5633
    Entry 2
    ObjectName: Machine
    HostUsername: oracle
    Port: 5633
    Configuring the Oracle Agent
    Choose one of the following options:
    1. Add a new Oracle instance to protect
    2. Edit an existing Oracle instance
    3. Delete an existing Oracle instance
    4. View Oracle instance entries that have been added in the Remote Agent Utility
    5. Quit
    Please enter your selection: 1
    Select an Oracle instance to configure
    Entry 1. TEST
    Enter the number 0 to go back
    Enter your selection: 1
    Enter the Oracle database SYSDBA user name: backup
    Enter the Oracle database SYSDBA password:
    Re-enter password:
    Validating credentials.......
    Failed to login.
    Please help me
    Thanks

  • Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5

    Hi all
    After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
    error 1719 Windows installer issue.
    I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
    Dave
    DJH

    Hi Lenora
    See below
    Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
    03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
    03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
    03-19-2013,17:33:38 : CSetupApp::ScanXML
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
    03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
    03-19-2013,17:33:38 : MSI Version = 3.1
    03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : System Central Processor = 64
    03-19-2013,17:33:38 : Product Type = SETUP_BEX64
    03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
    03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Product Version = 12.5
    03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Equal PID
    03-19-2013,17:33:38 : Product version: 12.5.2213
    03-19-2013,17:33:38 : StartBESequence
    03-19-2013,17:33:38 : Executing BE_PreCheckInstall
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing StartBESequence
    03-19-2013,17:33:38 : Pulling user data from the MSI
    03-19-2013,17:33:38 : Upgrade state set to 0
    03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
    03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
    03-19-2013,17:33:38 : MSI processing complete
    03-19-2013,17:33:38 : Pulling user data from the command line
    03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
    03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
    03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
    03-19-2013,17:33:38 : After check for parameter file exists.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
    03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
    03-19-2013,17:33:38 : After Check for INSTALL_MODE.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
    03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
    03-19-2013,17:33:38 : Ignoring the TSM switch.
    03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
    03-19-2013,17:33:38 : Not in Maintenance mode
    03-19-2013,17:33:38 : Getting the Silent Params.
    03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
    03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
    03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
    03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
    03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
    03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
    03-19-2013,17:33:38 : List of switches set follows:
    03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
    03-19-2013,17:33:38 : /SNO: = 0930292112010690
    03-19-2013,17:33:38 : /USER: = backup
    03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
    03-19-2013,17:33:38 : /PASS: = ********
    03-19-2013,17:33:38 : /TS:
    03-19-2013,17:33:38 : /TD: = ALL
    03-19-2013,17:33:38 : /DOCS:
    03-19-2013,17:33:38 : /LOADER:
    03-19-2013,17:33:38 : /AOFO:
    03-19-2013,17:33:38 : /EXCH:
    03-19-2013,17:33:38 : /SQL:
    03-19-2013,17:33:38 : /NTA:
    03-19-2013,17:33:38 : /RAULUS:
    03-19-2013,17:33:38 : /DBSERVER:
    03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
    03-19-2013,17:33:38 : /BACKUPDATA: = 0
    03-19-2013,17:33:38 : /MAC:
    03-19-2013,17:33:38 : Command line processing complete
    03-19-2013,17:33:38 : Install set to run in UI mode
    03-19-2013,17:33:38 : CDlgPushWelcome::Pass
    03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
    03-19-2013,17:33:43 : Validating license data
    03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
    03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:33:44 : Connected to SQL Server.
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
    03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
    03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:05 : After Check for Remote_Install.
    03-19-2013,17:34:05 : After Check for RA_INSTALL.
    03-19-2013,17:34:07 : Validating serialization data
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:07 : After Check for INSTALL_MODE.
    03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:34:07 : On Init of CDlgChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
    03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
    03-19-2013,17:34:12 : Validating Local Options Data
    03-19-2013,17:34:13 : Validating service account data
    03-19-2013,17:34:13 : CDlgSSO Pass Function.
    03-19-2013,17:34:13 : After Check for INSTALL_MODE.
    03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : Validating DlgChooseDBServer data
    03-19-2013,17:34:20 : Drive C:     Required: 1102 MB     Available: 37138 MB
    03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:20 : CDlgCAS Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : CDlgClone Pass Function.
    03-19-2013,17:34:20 : CDlgClone not passed.
    03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : Install Summary XML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
    03-19-2013,17:34:20 : Install Summary XSL File:
    03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
    03-19-2013,17:34:20 : Install Summary HTML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
    03-19-2013,17:34:20 : Not Quickstart Edition
    03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
    03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
    03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
    computer.  The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
    Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:27 : Executing InstallLiveUpdate.
    03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Vista or Longhorn server.  Not installing .NET Frameworks.
    03-19-2013,17:34:40 : .NET Framework was detected.  Skipping install.
    03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:34:41 : m_bUseNativeClient = 1
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
    03-19-2013,17:34:41 : SQL Server version 9
    03-19-2013,17:34:41 : SQL version returned:  9
    03-19-2013,17:34:41 : Executing SQL_GetServicePack.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
    03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
    UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
    03-19-2013,17:34:45 : V-225-53:  ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601.  ***To search for information about this error, click
    here
    03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
    03-19-2013,17:34:45 : Failed to install third party products.
    03-19-2013,17:37:25 : Validating install complete
    03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
    03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:37:25 : Removed files:
    03-19-2013,17:37:25 : ERROR:  Installation failed with error 1603.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:41:16 : Windows Operating System Version: 6.1
    03-19-2013,17:41:16 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:41:18 : Executing managed _Setup:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:41:18 : Loading XML from:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:41:19 : Launching UI Install
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:19 : m_bUseNativeClient = 1
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:41:20 : CopySupportFiles
    03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:41:28 : Typical install value is set to : True
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:43:04 : Install is not executing as the service account.
    03-19-2013,17:43:04 : Successfully Logged on as service account.
    03-19-2013,17:43:04 : Successfully impersonated service account.
    03-19-2013,17:43:04 : EUserName value successfully written to the registry.
    03-19-2013,17:43:04 : EPassword value successfully written to the registry.
    03-19-2013,17:43:04 : EDomain value successfully written to the registry.
    03-19-2013,17:43:09 : There were no remote computers selected for install
    03-19-2013,17:43:09 : m_bUseNativeClient = 1
    03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:43:10 : Terminal Services enabled.
    03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
    03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:43:11 : Executing InstallLiveUpdate.
    03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:36 : Starting Install
    03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:44:36 : Discovered Total Actions: 115
    03-19-2013,17:44:36 : The return code from the MSI is: 1601
    03-19-2013,17:44:36 : Cleaning up the symc status key
    03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:44:36 : Clean up Symantec installer keys.
    03-19-2013,17:44:37 : Terminal Services enabled.
    03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:45:28 : Gathering Telemetry items
    03-19-2013,17:45:28 : Failed to start the management service
    03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,17:45:28 : Sending Telemetry to Symantec
    03-19-2013,17:45:28 : Transmit Telemetry initialized.
    03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
    03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,17:56:31 : Windows Operating System Version: 6.1
    03-19-2013,17:56:31 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:56:33 : Executing managed _Setup:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:56:33 : Loading XML from:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:56:34 : Launching UI Install
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : m_bUseNativeClient = 1
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:56:35 : CopySupportFiles
    03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:56:49 : Typical install value is set to : True
    03-19-2013,17:56:50 : Executing SQL_GetServicePack.
    03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : Executing SQL_GetServicePack.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:57:37 : m_bUseNativeClient = 1
    03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:58:41 : Install is not executing as the service account.
    03-19-2013,17:58:41 : Successfully Logged on as service account.
    03-19-2013,17:58:41 : Successfully impersonated service account.
    03-19-2013,17:58:41 : EUserName value successfully written to the registry.
    03-19-2013,17:58:41 : EPassword value successfully written to the registry.
    03-19-2013,17:58:41 : EDomain value successfully written to the registry.
    03-19-2013,17:58:51 : There were no remote computers selected for install
    03-19-2013,17:58:51 : m_bUseNativeClient = 1
    03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:58:52 : Terminal Services enabled.
    03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
    03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:58:54 : Executing InstallLiveUpdate.
    03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Starting Install
    03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:59:08 : Discovered Total Actions: 115
    03-19-2013,17:59:08 : The return code from the MSI is: 1601
    03-19-2013,17:59:08 : Cleaning up the symc status key
    03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:59:08 : Clean up Symantec installer keys.
    03-19-2013,17:59:10 : Terminal Services enabled.
    03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:00:01 : The return code is: 0
    03-19-2013,18:00:01 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:02:24 : Windows Operating System Version: 6.1
    03-19-2013,18:02:24 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:02:26 : Executing managed _Setup:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:02:26 : Loading XML from:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:02:26 : Launching UI Install
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : m_bUseNativeClient = 1
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:02:26 : CopySupportFiles
    03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:11 : The return code is: 0
    03-19-2013,18:03:11 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:03:21 : Windows Operating System Version: 6.1
    03-19-2013,18:03:21 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:22 : Windows Operating System Version: 6.1
    03-19-2013,18:03:22 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:23 : Executing managed _Setup:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:23 : Loading XML from:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Launching UI Install
    03-19-2013,18:03:24 : Executing managed _Setup:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : m_bUseNativeClient = 1
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : Loading XML from:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:24 : CopySupportFiles
    03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:58 : Typical install value is set to : True
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:05:35 : Install is not executing as the service account.
    03-19-2013,18:05:35 : Successfully Logged on as service account.
    03-19-2013,18:05:35 : Successfully impersonated service account.
    03-19-2013,18:05:35 : EUserName value successfully written to the registry.
    03-19-2013,18:05:35 : EPassword value successfully written to the registry.
    03-19-2013,18:05:35 : EDomain value successfully written to the registry.
    03-19-2013,18:05:36 : There were no remote computers selected for install
    03-19-2013,18:05:36 : m_bUseNativeClient = 1
    03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:05:37 : Terminal Services enabled.
    03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
    03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:05:38 : Executing InstallLiveUpdate.
    03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Starting Install
    03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:05:50 : Discovered Total Actions: 115
    03-19-2013,18:05:50 : The return code from the MSI is: 1601
    03-19-2013,18:05:51 : Cleaning up the symc status key
    03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:05:51 : Clean up Symantec installer keys.
    03-19-2013,18:05:51 : Terminal Services enabled.
    03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:06:32 : The return code is: 0
    03-19-2013,18:06:32 : SUCCESS:  Installation has completed successfully.
    03-19-2013,18:07:36 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:07:39 : Error initializing shared data
    03-19-2013,18:07:39 : ERROR:  Installation failed with error 1603. GetLastError = :0
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:47 : Launching UI Install
    03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : m_bUseNativeClient = 1
    03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:13:48 : CopySupportFiles
    03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:13:54 : Typical install value is set to : True
    03-19-2013,18:13:55 : m_bUseNativeClient = 1
    03-19-2013,18:13:55 : Executing SQL_GetServicePack.
    03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : Executing SQL_GetServicePack.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:16:09 : Service account specified is not valid
    03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
    03-19-2013,18:16:10 : Error validating service account credentials.
    03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:16:20 : Install is not executing as the service account.
    03-19-2013,18:16:20 : Successfully Logged on as service account.
    03-19-2013,18:16:20 : Successfully impersonated service account.
    03-19-2013,18:16:20 : EUserName value successfully written to the registry.
    03-19-2013,18:16:20 : EPassword value successfully written to the registry.
    03-19-2013,18:16:20 : EDomain value successfully written to the registry.
    03-19-2013,18:16:22 : There were no remote computers selected for install
    03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:16:23 : Terminal Services enabled.
    03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
    03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:16:25 : Executing InstallLiveUpdate.
    03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Starting Install
    03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:16:39 : Discovered Total Actions: 115
    03-19-2013,18:16:39 : The return code from the MSI is: 1601
    03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:16:39 : Clean up Symantec installer keys.
    03-19-2013,18:16:39 : Cleaning up the symc status key
    03-19-2013,18:16:41 : Terminal Services enabled.
    03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:09 : Gathering Telemetry items
    03-19-2013,18:17:09 : Failed to start the management service
    03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,18:17:09 : Sending Telemetry to Symantec
    03-19-2013,18:17:09 : Transmit Telemetry initialized.
    03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
    03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
    03-19-2013,18:17:33 : Telemetry transmission failed.  Data was not sent.
    03-19-2013,18:17:33 : The return code is: 1601
    03-19-2013,18:17:33 : ERROR:  Installation failed with error 1601. GetLastError = :0
    03-19-2013,18:17:48 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:17:51 : Error initializing shared data
    03-19-2013,18:53:53 : m_bUseNativeClient = 1
    03-19-2013,18:53:53 : Executing SQL_GetServicePack.
    03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : Executing SQL_GetServicePack.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : m_bUseNativeClient = 1
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:58:06 : Windows Operating System Version: 6.1
    03-19-2013,18:58:06 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:58:08 : Executing managed _Setup:
    03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:58:09 : Loading XML from:
    03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:58:09 : Launching UI Install
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : m_bUseNativeClient = 1
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:58:10 : CopySupportFiles
    03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:58:15 : Typical install value is set to : True
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:59:43 : Install is not executing as the service account.
    03-19-2013,18:59:43 : Successfully Logged on as service account.
    03-19-2013,18:59:44 : Successfully impersonated service account.
    03-19-2013,18:59:44 : EUserName value successfully written to the registry.
    03-19-2013,18:59:44 : EPassword value successfully written to the registry.
    03-19-2013,18:59:44 : EDomain value successfully written to the registry.
    03-19-2013,18:59:46 : There were no remote computers selected for install
    03-19-2013,18:59:46 : m_bUseNativeClient = 1
    03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:59:47 : Terminal Services enabled.
    03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
    03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:59:49 : Executing InstallLiveUpdate.
    03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Starting Install
    03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,19:00:03 : Discovered Total Actions: 115
    03-19-2013,19:00:03 : The return code from the MSI is: 1601
    03-19-2013,19:00:03 : Cleaning up the symc status key
    03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,19:00:03 : Clean up Symantec installer keys.
    03-19-2013,19:00:05 : Terminal Services enabled.
    03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:10 : Gathering Telemetry items
    03-19-2013,19:00:10 : Failed to start the management service
    03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,19:00:10 : Sending Telemetry to Symantec
    03-19-2013,19:00:10 : Transmit Telemetry initialized.
    03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
    03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
    03-19-2013,19:00:10 : The return code is: 1601
    03-19-2013,19:00:11 : ERROR:  Installation failed with error 1601. GetLastError = :0 
    DJH

  • Daylight savings and backup exec

    I haven't had this problem before, the OS and patching hasn't changed,
    here are the configurations and symptoms.
    OS platform is NW 6.5 OES SP6. Running the time command shows the
    correct time. However the Symantec Backup exec software 9.2 rev 1391 is
    exactly 1 hour behind. This stems from daylight savings. The backup
    software resides on a cluster node but is not cluster enabled. The node
    and software have been restarted but the time is still incorrect.
    This is a very strange behavior, has anyone felt this sting?
    Cheers,
    CB

    LinuxNewbie1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Backup Exec bkupexec.nlm loadline parameters

    We got the backup exec netware agent running in our environment. I was searching on the internet about loadline parameters of this NLM but i can't find documentation about them anywhere. It seems that since support has ended for this agent all documentation about the configuration disappeared from the internet.
    Is there anyone who can explain what command line parameters exist and what they do?

    Helpdesk-dehoogstraat,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • How to schedule SQL Agent job for XMLA script file of SSAS database instead of taking a backup.

    I want to script XMLA file instead of backup of database and also want to schedule a job for the process in SQL Agent. 
    Is there any pros and cons when I script the XMLA file of the SSAS db instead of taking a backup ? 
    Amir

    Hi Amir,
       You can take the Create SSAS database XMLA script and run the job to create the cube. The script contains the Metadata definition of the Database and it does not contain the actual data. 
    Pros: Since you are only creating an empty cube the script will run faster 
    Cons: You still need to process the created cube to use it for reports.
    Fastest option is to take the backup of the cube and restore wherever necessary.
    And you can also use TFS source control to deploy the cube and process it later.
    Regards,
    Venkata
    Venkata Koppula

Maybe you are looking for

  • Problem in collections:

    I am having a a problem here: Map<Integer, String> map = new ArrayList<Integer, String>(); Collection<Integer> keys = map.keySet(); for(String id : categories) {      if(Collections.binarySearch(keys, Integer.valueOf(id)) > 0) { some code...} While c

  • Animation fully runs in Chrome and Opera, not in any other browsers

    All, I created an extensive animation with images and sounds (*.mp3 and *.wav files) using Adobe Edge Animate for a website I'm creating for a client. I've uploaded everything to the host, which is Shopify, and the animation works in Google Chrome an

  • Video adding problem.

    I've got a problem with my iTunes, i cant add video files. when i try it just won't add it, no error, no nothing. i converted it to mpeg4 but still the problem remains. help? thanks.

  • Indesign CC Progress Bar Colour

    Hi This will probably seem like a trifling issue, and it probably is, but it does bug me a little.. Loving the new dark UI in Indesign CC, but when I open a document I end up doing a double take that I've used the right app... The progress bar that c

  • Minimum Lot Size Ignored

    Hello All, To replicate scenario, I have created new material with minimum lot size 10 pcs and created independent requirement (LSF) and then created scheduling agreement. Independent requirements as 8 pc for every day. Now when I run the MRP and che