Symantec Endpoint C++ Runtime Errors
I got a new T61 a couple of weeks ago for school, and just installed Symatec Endpoint Protection. (It's free from my school, so I have a huge incentive to use that specific software.) Almost immediately, I started getting C++ Runtime Errors saying that the Symantec application had requested to be shut down in an unusual way. I looked this up in Symantec's support site, and they're stating that the problem is actually due to the Thinkvantage software that controls the fingerprint reader. Link to Symantec page:
http://service1.symantec.com/support/ent-security.nsf/854fa02b4f5013678825731a007d06af/f4f5c9422ae6c...
I like using the fingerprint reader, and don't want to have to disable it, but the virus protection is more important to me. Has anyone else come up with a work around for this yet?
Please let me know.
Thanks.
I have that problem with both T61 and X61 series, fully updated with System Update & Windows Update. Exact Same Problem, SEP 11.0.3001 (MR3). Visual C++ Runtime error, shut down in an unusual way.
I've even gone back to 11.0.2020 (MR2) and 11.0.1 (MR1)- and still have the problem there.
Symantec's forums aren't much help either. https://forums.symantec.com/syment/board/message?board.id=endpoint_protection11&message.id=16616&que... is the most similar, yet least helpful.
There is indication that it might be Client Security Solution; so I'm presently uninstalling that on a test machine with SEP 11 MR3 to see what happens. That might be why you were suggested to uinstall the fingerprint software; only I doubt that will work since it has functionality from CSS.
Similar Messages
-
Symantec Endpoint Protection Manager Installer Information Script Error
hi
I can't install SEP Manager 14.1 in our windows 2012 R2 server I got an error during the installation.While was installing symantec endpoint production 14.01 , I am getting an error right at the end of the install. I understand that . I should do it with
vbs running for symantec installing. however I dont know How can I do it ?,
"Symantec Endpoint Protection Manager Installer Information - Error 1722. There is a problem with this Windows Installer package. A
program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action RunFIPSScript, location: c:\Program Files (x86)\Symantec\Symantec Endpoint Protection Manager\bin\, command: C:\Windows\SysWOW64\...\FIPSMode.vbs"
-install"Hi,
I am Chetan Savade from Symantec Technical Support Team.
I think you are talking about SEP 12.1 product. There is not any product by code 14.1.
With reference to mentioned issue there is a Public Kb available. Refer the following KB:
Symantec Endpoint Protection "Error 1722: There is a problem with this Windows Installer package..."
http://www.symantec.com/docs/TECH103131
Possible Solution as per KB: To fix the problem, run the Windows Installer CleanUp utility and then remove Symantec AntiVirus manually. Then, install Symantec Endpoint Protection again.
To learn how to obtain and use the Windows Installer CleanUp utility, read the
Microsoft article Description of the Windows Installer CleanUp Utility.
Click the entry for Symantec AntiVirus or Symantec Client Security, and then click Remove.
If more than one entry appears, remove the earliest program version first. After you remove all entries for Symantec AntiVirus and Symantec Client Security, remove Symantec AntiVirus manually.
To find directions for your version of Symantec AntiVirus, read
Manual uninstallation documents for Symantec Client Security products.
Symantec connect forum link to raise SEP related issue: https://www-secure.symantec.com/connect/security/forums/endpoint-protection-antivirus
Best Regards,
Chetan -
Hi ,
Am getting Error code 1603 (fatal error during installation) while deploying the SEP through MDT task sequence . am not getting such issue regularly but some time am getting and need to be fixed.
Shailendra
Shailendra DevHi,
I am Chetan Savade from Symantec Technical Support Team.
Logs can provide more detail info, as said earlier by MrBrooks provide SEP_Inst.log from the affected machine.
Adding Windows defender related articles if they can help you:
Keeping Windows Defender Enabled when Deploying and Installing Symantec Endpoint Protection Client package.
http://www.symantec.com/docs/TECH168501
Windows Defender startup type registry value is Manual instead of Disabled after installing Symantec Endpoint Protection
http://www.symantec.com/docs/TECH206793
How to prepare a Symantec Endpoint Protection 12.1.x client for cloning
http://www.symantec.com/docs/HOWTO54706
Best Regards,
Chetan -
Symantec Endpoint Encryption 11 Installation Error
Hey guys. I am trying to deploy the Symantec Endpoint Encryption 11 Manager onto a server.I run into the a problem when I have to specify the Windows domain account to use for database access.I enter the service account which has full admin rights to the SQL INSTANCE and I get the following error:The domain user credentials did not pass verification. Re-enter the user name, password, and or domain and try again.Weird thing is that when I enter my username and password it continues. It only seems to proceed with my username and password. I was following the HOW TOHEREin which they also used a service account. The username and password are correct. This is the same account that is used to run the services. Does it require a domain admin username and password?
To quote Lewis Carrol, from Alice’s Adventures in Wonderland: ‘Would you tell me, please, which way I ought to go from here?’ ‘That depends a good deal on where you want to get to,’ said the Cat. ‘I don’t much care where ’ said Alice. ‘Then it doesn’t matter which way you go,’ said the […]…Read MoreThe post Aligning Cyber Strategy to the Business appeared first on The State of Security.
Read More -
BSOD on XP with Zenworks and Symantec Endpoint Protection
After upgrading to Symantec Endpoint Protection (SEP) we are getting Blue Screen after imaging.
We have SEP included in our image and after pushing the image to another computer, we instantly get a BSOD, when trying to boot up the newly imaged machine:
*** STOP: 0x00000024 (0x00190203,0x8A4B0DE8,0xC0000102,0x00000000)
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
For test purpose I have tried doing the imaging job with Ghost 2003. This works perfectly, so I guess it is the combination of SEP and ZfD that is causing the problem. If I exclude SEP from the image, imaging with ZfD works fine. Imaging with Symantec antivirus ver. 10 also works perfect.
Anyone out there running ZfD and SEP 11?
Environtment:
Windows XP SP3
ZfD 7.01 sp1 ir1 running on Netware 6.5
Symantec Enpoint Protection 11.0.3001.2224 (getting the same error with 11.0.2010.25)There should an updated patch for ZDM7 available withing a few days. (ZDM7
SP1 IR3A HP1.)
I would strongly suggest testing with the updated files when they are
released.
The is a much newer Linux Kernal starting with IR3A which could effect your
problem.
If you are still seeing an issue, I would suggest opening a ticket with
Novell.
Unless somebody here happened to have a copy of SEP, helping here would be
tough.
But I have not heard of this issue myself, but anything is possible.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"martinusen" <[email protected]> wrote in message
news:[email protected]...
>
> After upgrading to Symantec Endpoint Protection (SEP) we are getting
> Blue Screen after imaging.
>
> We have SEP included in our image and after pushing the image to
> another computer, we instantly get a BSOD, when trying to boot up the
> newly imaged machine:
>
> *** STOP: 0x00000024 (0x00190203,0x8A4B0DE8,0xC0000102,0x00000000)
>
> Disable or uninstall any anti-virus, disk defragmentation or backup
> utilities. Check your hard drive configuration, and check for any
> updated drivers. Run CHKDSK /F to check for hard drive corruption, and
> then restart your computer.
>
> For test purpose I have tried doing the imaging job with Ghost 2003.
> This works perfectly, so I guess it is the combination of SEP and ZfD
> that is causing the problem. If I exclude SEP from the image, imaging
> with ZfD works fine. Imaging with Symantec antivirus ver. 10 also works
> perfect.
>
> Anyone out there running ZfD and SEP 11?
>
> Environtment:
> Windows XP SP3
> ZfD 7.01 sp1 ir1 running on Netware 6.5
> Symantec Enpoint Protection 11.0.3001.2224 (getting the same error with
> 11.0.2010.25)
>
>
> --
> martinusen
> ------------------------------------------------------------------------
> martinusen's Profile: http://forums.novell.com/member.php?userid=26795
> View this thread: http://forums.novell.com/showthread.php?t=345351
> -
Symantec Endpoint Protection 12.1 and Peopletools 8.53
Hello,
We're currently enabling virus scan for PT 8.53 with Symantec Endpoint Protection (SEP) v12. However, we are unable to configure it correctly. Our set up looks like this:
* PS webserver is insatalled on server 1, this is where we configure the virusscan.xml file
* SEP 12 is installed on a separate server, server 2. client and SEP manager is installed on this server.
* OS is Windows 2008 R2 64-bit for both servers.
May I know if anyone here have successfully used SEP for scanning attachments?
Unfortunately, as per oracle, only symantec scan engine was verified to work with peoplesoft, other versions are still not tested to work.
another question is, what should be the value for the virusscan.xml parameters below?
<Provider>
<name>SymantecManagementClient</name>
<class>psft.pt8.virusscan.provider.GenericVirusScanProviderImpl</class>
<icapversion>ICAP/1.0</icapversion>
<service-name>/SmcService</service-name>
<policycommand>?action=SCAN</policycommand>
<address>server2</address>
<port>8014</port>
<disable>false</disable>
</Provider>
we've mixed and matched the available service names from server 2, but we are still getting the error below:
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient connectAndCheckOptions
INFO: Input OPTIONS Header = OPTIONS icap://server2:8014/SmcService ICAP/1.0
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient connectAndCheckOptions
INFO: OPTIONS recieve header= HTTP/1.1 200 OK
Date: Tue, 10 Sep 2013 15:14:19 GMT
Server: Apache
Allow: GET,HEAD,POST,OPTIONS
Content-Length: 0
Connection: close
Content-Type: text/plain
ICAP header = ICAP/1.0 200
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.ICAPClient scanStream
SEVERE: Unable to connect to the Scan server SymantecManagementClient; Reason = CONNECTERROR
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.VirusScanProviderManager scanStream
INFO: Scanning completed using provider = SymantecManagementClient Provider classname = psft.pt8.virusscan.provider.GenericVirusScanProviderImpl
Sep 10, 2013 11:14:19 PM psft.pt8.virusscan.VirusScanProviderManager scanStream
INFO: Finish Scanning Request.
port 8014 is the client communications port for SEP and its the only port that gives us a response (INFO: OPTIONS recieve header= HTTP/1.1 200 OK..etc), when we try other ports we get a "SEVERE: Unable to connect to SymantecManagementClient" message on this line.
Hoping for your responses, thank you in adance for your help.Hello,
Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories. -
HL7 Outbound runtime error: "Mandatory attribute missing: Standard"?
I am trying to develop an outbound HL7 v2 solution. I have a composite that picks up an XML message, transforms it to a HL7 v2 XML, popuates b2b. properties and hads the payload over to teh B2B. The partners and partnerships are, seemingly, OK. Yet, I get a runtime error "Mandatory attribute missing: Standard". What am I missing?
The error (one of them anyway) looks like that below.
Thanks in advance for any pointers that anyone may be able to offer.
Regards
Michael
[2010-06-25T09:13:34.437+10:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@157bfbf] [userId: <anonymous>] [ecid: 0000I_gFDdOESOYjLpyGOA1C8Mno0005_G,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 3df7286553d16a99:75be56fb:129629445e0:-7fd3-000000000000004e] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>C0A8A4811296C3CD78A000001FFF4A70</correlationId>
<b2bMessageId>34373438353435383437393236303338</b2bMessageId>
<errorCode>B2B-51507</errorCode>
<errorText>
<![CDATA[
Error Brief :
XEngine error.
]]>
</errorText>
<errorDescription>
<![CDATA[
Error :
Mandatory attribute missing: Standard.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="b2b.messageId" value="34373438353435383437393236303338"/>
<parameter name="b2b.documentTypeName" value="ADT_A01"/>
<parameter name="b2b.documentProtocolVersion" value="2.3.1"/>
<parameter name="b2b.documentDefinitionName" value="ADT_A01_DocDef"/>
<parameter name="b2b.documentProtocolName" value="HL7"/>
<parameter name="b2b.messageType" value="1"/>
<parameter name="b2b.fromTradingPartnerId" value="LocalHL7Receiver"/>
<parameter name="b2b.fromTradingPartnerIdType" value="Name"/>
<parameter name="b2b.toTradingPartnerId" value="127.0.0.1"/>
<parameter name="b2b.toTradingPartnerIdType" value="MLLP ID"/>
</errorDetails>
</Exception>
[2010-06-25T09:13:34.437+10:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@157bfbf] [userId: <anonymous>] [ecid: 0000I_gFDdOESOYjLpyGOA1C8Mno0005_G,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [dcid: 3df7286553d16a99:75be56fb:129629445e0:-7fd3-000000000000004e] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUEAnswering my own question - I needed to populate the Standard attribute of the outbound message with teh string HL7. I populated Version attribute with 2,3,1 just for a good measure. Things now work.
-
B2 Error: B2B-50029: B2B runtime error
Hi there,
I'm pretty new to the Oracle B2B world and I'm having problems making a simple sample that receives, changes some parameters in the message (using BPEL) and forwards the changed message to a designated endpoint.
The message is received successfully in B2B and sent to BPEL. There I'm changing the MSH.3 and MSH.5 (source and destination of the message) and I'm sending it back to B2B.
I've also tried to change the internal properties of the message that refer to the destination/origin of the message and removing all the internal properties but with the same result.
My problem is that when I send the message back from BPEL to the B2B engine the message gives the following error and I'm unable to understand what can be happening.
The logging information that I was able to get my hands on is the following:
Message Level 1
dcid a7acfb4f5f216892:-3f4d7363:128818f9ac9:-7ffd-0000000000002524
Relationship ID 0
Component soa_server1
Module oracle.soa.b2b.engine
Host XXXX
Host IP Address XXX.XXX.XXX.XXX
User <anonymous>
Thread ID weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@26f0d69
ECID 0000IY1dVPnF^6p6wRIbMG1BtxAm0000I0
Message Informational -: B2B-50014: General Error: Informational -: B2B-50029: B2B runtime error
Supplemental Detail at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1400)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:363)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:196)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1335)
... 8 more
Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:363)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:196)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1335)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Informational -: B2B-50014: General Error: Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1400)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:363)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:196)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1335)
... 8 more
Can someone help be find out the problem?
Thanks in advance,
Best Regards,
Daniel AlvesHi there,
I didn't change the MSH.4 and MSH.6 because they are the same... I'm trying to create an example of exchange of messages between 2 applications in the same facility with a Middleware Structure in the middle.
I can't find anymore information about the error... What I've inserted in the last post was the information of the log file (soa_server1-diagnostic.log)... Don't know anywhere else to look for more information... Is there other place?
The message that I'm trying to send, after the BPEL process, is the following:
<?xml version="1.0" encoding="UTF-8"?>
<ORM_O01 xmlns="urn:oracle:integration:b2b:93EB013A5133487AB90473B064C57939" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2010-05-10T10:47:47"
CreatedBy="XEngine_2108" GUID="{19073B90-E360-40DA-80F8-8063F6E7CC69}">
<Internal-Properties>
<Data-Structure Name="Message">
<Lookup Name="InternatCodeAlternateID"/>
<Lookup Name="InternatCodeAlternateSystem"/>
<Lookup Name="InternatCodeAlternateText"/>
<Lookup Name="InternatCodeID"/>
<Lookup Name="InternatCodeSystem"/>
<Lookup Name="InternatCodeText"/>
<Lookup Name="InternationalVersionID"/>
<Lookup Name="InternationalVersionIDAlternateID"/>
<Lookup Name="InternationalVersionIDAlternateSystem"/>
<Lookup Name="InternationalVersionIDAlternateText"/>
<Lookup Name="InternationalVersionIDSystem"/>
<Lookup Name="InternationalVersionIDText"/>
<Lookup Name="MessageCode">ORM</Lookup>
<Lookup Name="MessageReceivingApp">DestinationApp</Lookup>
<Lookup Name="MessageReceivingAppUniversalID"/>
<Lookup Name="MessageReceivingAppUniversalIDType"/>
<Lookup Name="MessageReceivingFacility">Facility</Lookup>
<Lookup Name="MessageReceivingFacilityUniversalID"/>
<Lookup Name="MessageReceivingFacilityUniversalIDType"/>
<Lookup Name="MessageSendingApp">OriginApp</Lookup>
<Lookup Name="MessageSendingAppUniversalID"/>
<Lookup Name="MessageSendingAppUniversalIDType"/>
<Lookup Name="MessageSendingFacility">Facility</Lookup>
<Lookup Name="MessageSendingFacilityUniversalID"/>
<Lookup Name="MessageSendingFacilityUniversalIDType"/>
<Lookup Name="MessageVersion">2.3.1</Lookup>
<Lookup Name="Standard">HL7</Lookup>
<Lookup Name="TriggerEvent">O01</Lookup>
<Property Name="AcceptAckType"/>
<Property Name="AlternateCharacterSetSchema"/>
<Property Name="AppAckType"/>
<Property Name="CharSet"/>
<Property Name="ConformanceStatementID"/>
<Property Name="ContinuationPointer"/>
<Property Name="CountryCode"/>
<Property Name="ElementDelimiter">0x7c</Property>
<Property Name="InternatCodeAlternateID"/>
<Property Name="InternatCodeAlternateSystem"/>
<Property Name="InternatCodeAlternateText"/>
<Property Name="InternatCodeID"/>
<Property Name="InternatCodeSystem"/>
<Property Name="InternatCodeText"/>
<Property Name="InternationalVersionID"/>
<Property Name="InternationalVersionIDAlternateID"/>
<Property Name="InternationalVersionIDAlternateSystem"/>
<Property Name="InternationalVersionIDAlternateText"/>
<Property Name="InternationalVersionIDSystem"/>
<Property Name="InternationalVersionIDText"/>
<Property Name="LanguageAlternateID"/>
<Property Name="LanguageAlternateSystem"/>
<Property Name="LanguageAlternateSystemVersionID"/>
<Property Name="LanguageAlternateText"/>
<Property Name="LanguageID"/>
<Property Name="LanguageOriginalText"/>
<Property Name="LanguageSystem"/>
<Property Name="LanguageSystemVersionID"/>
<Property Name="LanguageText"/>
<Property Name="MessageCode">ORM</Property>
<Property Name="MessageControlID">MSG00001</Property>
<Property Name="MessageDate">20100505101129</Property>
<Property Name="MessageDateTimePrecision"/>
<Property Name="MessageEncodingCharacters">^~\&</Property>
<Property Name="MessageProfileNamespaceID"/>
<Property Name="MessageProfileUniversalID"/>
<Property Name="MessageProfileUniversalIDType"/>
<Property Name="MessageReceivingApp">DestinationApp</Property>
<Property Name="MessageReceivingAppUniversalID"/>
<Property Name="MessageReceivingAppUniversalIDType"/>
<Property Name="MessageReceivingFacility">Facility</Property>
<Property Name="MessageReceivingFacilityUniversalID"/>
<Property Name="MessageReceivingFacilityUniversalIDType"/>
<Property Name="MessageReceivingNetworkAdd"/>
<Property Name="MessageReceivingNetworkAddUniversalID"/>
<Property Name="MessageReceivingNetworkAddUniversalIDType"/>
<Property Name="MessageSecurity"/>
<Property Name="MessageSendingApp">OriginApp</Property>
<Property Name="MessageSendingAppUniversalID"/>
<Property Name="MessageSendingAppUniversalIDType"/>
<Property Name="MessageSendingFacility">Facility</Property>
<Property Name="MessageSendingFacilityUniversalID"/>
<Property Name="MessageSendingFacilityUniversalIDType"/>
<Property Name="MessageSendingNetworkAdd"/>
<Property Name="MessageSendingNetworkAddUniversalID"/>
<Property Name="MessageSendingNetworkAddUniversalIDType"/>
<Property Name="MessageStructure"/>
<Property Name="MessageVersion">2.3.1</Property>
<Property Name="ProcessingID">P</Property>
<Property Name="ProcessingMode"/>
<Property Name="ReceivingResponsibleOrganization"/>
<Property Name="ReceivingResponsibleOrganizationAANamespaceID"/>
<Property Name="ReceivingResponsibleOrganizationAAUniversalID"/>
<Property Name="ReceivingResponsibleOrganizationAAUniversalIDType"/>
<Property Name="ReceivingResponsibleOrganizationAFNamespaceID"/>
<Property Name="ReceivingResponsibleOrganizationAFUniversalID"/>
<Property Name="ReceivingResponsibleOrganizationAFUniversalIDType"/>
<Property Name="ReceivingResponsibleOrganizationCheckDigitScheme"/>
<Property Name="ReceivingResponsibleOrganizationID"/>
<Property Name="ReceivingResponsibleOrganizationIDCheckDigit"/>
<Property Name="ReceivingResponsibleOrganizationIDNumber"/>
<Property Name="ReceivingResponsibleOrganizationIDType"/>
<Property Name="ReceivingResponsibleOrganizationNameReprCode"/>
<Property Name="ReceivingResponsibleOrganizationType"/>
<Property Name="ReleaseCharacter">0x5c</Property>
<Property Name="RepeatingSeparator">0x7e</Property>
<Property Name="SegmentDelimiter">0x0d</Property>
<Property Name="SendingResponsibleOrganization"/>
<Property Name="SendingResponsibleOrganizationAANamespaceID"/>
<Property Name="SendingResponsibleOrganizationAAUniversalID"/>
<Property Name="SendingResponsibleOrganizationAAUniversalIDType"/>
<Property Name="SendingResponsibleOrganizationAFNamespaceID"/>
<Property Name="SendingResponsibleOrganizationAFUniversalID"/>
<Property Name="SendingResponsibleOrganizationAFUniversalIDType"/>
<Property Name="SendingResponsibleOrganizationCheckDigitScheme"/>
<Property Name="SendingResponsibleOrganizationID"/>
<Property Name="SendingResponsibleOrganizationIDCheckDigit"/>
<Property Name="SendingResponsibleOrganizationIDNumber"/>
<Property Name="SendingResponsibleOrganizationIDType"/>
<Property Name="SendingResponsibleOrganizationNameReprCode"/>
<Property Name="SendingResponsibleOrganizationType"/>
<Property Name="SequenceNumber"/>
<Property Name="Standard">HL7</Property>
<Property Name="SubcomponentDelimiter">0x26</Property>
<Property Name="SubelementDelimiter">0x5e</Property>
<Property Name="TriggerEvent">O01</Property>
</Data-Structure>
</Internal-Properties>
<MSH>
<MSH.1>|</MSH.1>
<MSH.2>^~\&</MSH.2>
<MSH.3>
<HD.1>OriginApp</HD.1>
</MSH.3>
<MSH.4>
<HD.1>Facility</HD.1>
</MSH.4>
<MSH.5>
<HD.1>DestinationApp</HD.1>
</MSH.5>
<MSH.6>
<HD.1>Facility</HD.1>
</MSH.6>
<MSH.7>
<TS.1>20100505101129</TS.1>
</MSH.7>
<MSH.8 xsi:nil="true"/>
<MSH.9>
<MSG.1>ORM</MSG.1>
<MSG.2>O01</MSG.2>
</MSH.9>
<MSH.10>MSG00001</MSH.10>
<MSH.11>
<PT.1>P</PT.1>
</MSH.11>
<MSH.12>
<VID.1>2.3.1</VID.1>
</MSH.12>
<MSH.13 xsi:nil="true"/>
<MSH.14 xsi:nil="true"/>
<MSH.15 xsi:nil="true"/>
<MSH.16 xsi:nil="true"/>
<MSH.17 xsi:nil="true"/>
</MSH>
<ORM_O01.PATIENT>
<PID>
<PID.1>123</PID.1>
<PID.2 xsi:nil="true"/>
<PID.3>
<CX.1>1234</CX.1>
<CX.2>dfg</CX.2>
</PID.3>
<PID.4 xsi:nil="true"/>
<PID.5>
<XPN.1>
<FN.1>dassd</FN.1>
</XPN.1>
</PID.5>
<PID.6 xsi:nil="true"/>
<PID.7 xsi:nil="true"/>
<PID.8>M</PID.8>
</PID>
</ORM_O01.PATIENT>
<ORM_O01.ORDER>
<ORC>
<ORC.1>NW</ORC.1>
<ORC.2>
<EI.1>133</EI.1>
</ORC.2>
<ORC.3>
<EI.1>321</EI.1>
</ORC.3>
<ORC.4>
<EI.1>12</EI.1>
</ORC.4>
<ORC.5 xsi:nil="true"/>
<ORC.6>D</ORC.6>
</ORC>
<ORM_O01.ORDER_DETAIL>
<ORM_O01.CHOICE>
<OBR>
<OBR.1>12</OBR.1>
<OBR.2>
<EI.1>133</EI.1>
</OBR.2>
<OBR.3>
<EI.1>321</EI.1>
</OBR.3>
<OBR.4>
<CE.1>12</CE.1>
</OBR.4>
<OBR.5 xsi:nil="true"/>
<OBR.6 xsi:nil="true"/>
<OBR.7 xsi:nil="true"/>
<OBR.8 xsi:nil="true"/>
<OBR.9 xsi:nil="true"/>
<OBR.10 xsi:nil="true"/>
<OBR.11 xsi:nil="true"/>
<OBR.12 xsi:nil="true"/>
<OBR.13>teste e cenas</OBR.13>
</OBR>
</ORM_O01.CHOICE>
</ORM_O01.ORDER_DETAIL>
</ORM_O01.ORDER>
</ORM_O01>
Best Regards,
Daniel Alves -
T6x: IP Conflict after sleep mode using Symantec Endpoint Protection server.
Here is the problem I'm having: We have several t6x laptops running various versions of Vista (business, enterprise, ultimate, x86 and x64), and we have Symantec Endpoint Protection server with client distributed to laptops.
Every possible thing is at the latest level downloadable from MS, Symantec, Lenovo. HW is not malfunctioning in any way.
If a laptop enters sleep mode and wakes up, windows return an error stating there is an IP conflict with the other computer on the network (with the same IP address and the same MAC addr !?). Other than that bluetooth and tpm drivers fail as well.
If Endpoint protection is uninstalled laptops wake from sleep/hibernation without problem.
If anyone has a clue what is going on please share the info...
moderator note: title specified.
Message Edited by Agotthelf on 24-03-2009 05:25 PMHello redrum781, welcome to Lenovo forums!
I have done a forums search for "symantec endpoint protection".
It reveals there were a lot of problems with it, wireless disconnects or C++ errors.
I would suggest to use a different antivirus solution, if this is applicable for you.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
I can't print with symantec endpoint protection
I can't print with symantec endpoint protection.
I have to disable the firewall, or reboot my windows 7 computer for the print job to print. Any ideas what is blocking the printing process and how do I allow so I can print using my HP P2033dn that is connected via ethernet to my time capsule. ThanksIn the meanwhile I detected the problem. I made a new user account in windows and now it works correctly. So it isn't a photoshop problem but probably a register error. I have to find out furtherThanks for your reaction.
[ excessive quoting removed by admin ] -
LabView / DSC / FieldPoint with Symantec Endpoint Encryption Device Control
I am developing a LabView DSC based control program to communicate with multiple FieldPoint modules (cFP2200/cFP1808) for a client. Their IT department has implemented Symantec Endpoint Encryption Device Control ( http://www.symantec.com/endpoint-encryption-device-control ) and I was wondering if anyone has had experience with this software?
From what I have read and had explained to me, it is much more than an antivirus program. It operates at a very low level within Windows and restricts reading/writing to external devices, USB sticks, network shares, etc. It can also monitor / restrict network traffic and WiFi access.
Thanks,
SteveHi MillerMech,
I believe it will cause some errors to be thrown due to its restrictive nature. Symantec has a discussion forum which will most likely be more helpful:
http://www.symantec.com/business/support/index?page=home
Sunaina K.
Product Manager
Embedded Systems -
Runtime error in starting Lightroom
I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff CulpAha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji
Maybe you are looking for
-
Is there a way to "force" an EFI update?
Hi all I have the Macbook 5,1 with 4GB of RAM. I read [over at OWC|http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb ] that this computer supports 8GB provided it has the "updated" version of the MB51.007D.B03 Boot ROM. I wo
-
HT2534 my big problem no none option in payment option
i have a problem that no none payment option
-
More items in "recent places" list when attaching documents?
Hello, I find it very useful to have the "recent places" list when browsing for a file I want to attach to an e-mail. In almost all of the other programs I use, however, the recent places list seems to have about twice as many listed as the Mail prog
-
Validity Date options in the Portal for Child Subtype
Hi All, For Child Subtype, the three options 1. Valid from Today 2. Valid as of Future Date 3. Validity Period are present in the portal depending on the usecase maintained. For the 2nd & 3rd option, the user can enter only future dates. Past dates a
-
Exporting Help in Lightroom 2.7
I am trying to export a file from Lightroom. I don't see any mark on the file that I just exported that file. Is there any way to do/see that? If i don't end up working on all of my images at one time & then close down lightroom, when I open it up