Symbian Anna Slovenian Language pack?

Hi!
I'm wondering if there is slovenian language pack for symbian anna?
I've just updated my nokia n8 but there is no option to choose slovenian language...
Is there any option to return on previous slovenian operation system?
Thanks in advance, Anze
Solved!
Go to Solution.

Hi Anze,
Symbian Anna has been released with Slovenian language. Each Symbian^3 device has a set of languages based on the product code of the device. Each country where the device is sold may have several different product codes allocated to it, for example each color or operator variant has its own product code. However all product codes which are sold in Slovenia should naturally have language set which includes Slovenian language. You can see the product code of your N8 by pressing *#0000#. If you let me know what the product code is, I can check is it a Slovenian variant.
If your N8 previously had Slovenian language, one possibility is that your N8 product code isn’t actually one which includes Slovenian language because at some point it has been force flashed with some other product code’s software which includes Slovenian language set. This is not possible with software update methods Nokia offers to our customers so it has been done some other way.
As a result of this forced flashing, the language set of your N8 perhaps didn’t correspond with the product code of the device. When you then updated your N8 software to latest version, the official Nokia sw update application (phone sw update client or Nokia Suite) checked the real product code of your device and updated also the corresponding language set into your N8 as it supposed to do.
It’s not possible to downgrade the software to previous version and it actually wouldn’t solve this issue if it’s related to product code as I suspect. You could contact the retailer from whom you purchased your N8 to get genuine Slovenian variant or contact local Nokia Care Center to see is there anything they could do.

Similar Messages

Anna update + language packs or flashing?

Hello I've got kind of a big question here regarding the new Anna update, but there are some doubts I have that I could not find solutions to within this forum.
Basically I've bought a C7 from my Vodafone dealer here in Australia but to fulfill my needs I gave it to the dealer to have Chinese installed. But I'm not sure if they flashed the phone or they simple installed a language pack. I need some advice on this, and my phone versions as as below:
Release: PR1.2
Software: 0.14.002
Custom version: 0.14.062.C01.01
Language: 0.14.002.28.01
Type: RM-675
So any professionals here may assist me in identifying whether this C7 was flashed into some other firmware that has Chinese on it or is it simply a language pack install? This phone was bought in Australia with only English support but now it has both English and SImplified Chinese.
Second part of my question. I know that when updating Anna the language will revert back to the original language of the phone. Now, if my phone was just installed with language pack, it will revert back to English only. Whereas if it was flashed into, say, China Mainland firmware byt the dealer, it will still support Chinese, because the phone is practically the same as a Chinese bought OEM phone. Since all Nokia phones are practically the same with only exception of different firmware for different locales. Is my theory correct?
Assume the phone was flashed into Chinese firmware, by updating Anna, will both Chinese and English be available to me?
I know this is rather lengthy for a question but, any helpful input will be greatly appreciated, as I really want to use Anna and also keep my language support. Thanks.
Nokia C7-00 Symbian Belle RM-675

they might have installed a language pack.
flashing the firmware on Chinese only, you should only see Chinese and similar languages.
yes the phones are the same, with some exceptions where some countries don't allow GPS for example.
giving the phone to a service center to flash it with another firmware will void your warranty. and i don't see any reason to void it.
flashing with Chinese, only Chinese and similar languages will be available to you, you might have English, but i doubt it.
Greece Nokia X6 RM-559 v40.0.002

Symbian Anna Service Pack installation cancelled i...

How can I check if I have the service pack installed correctly?
In Applications - SW Update - Options - View Update History I see:
Symbian Anna service pack - Installation cancelled
In Settings - Phone - Phone management - Device Updates I have:
Release: Symbian Anna
Software version: 022.014
In App Manager - Installed applications - Logs the last entries are:
Metadata System Upgrade - Installed
Java Runtime Update (2.0) - Installed
Conversation Server 1.58 - Installed
messaging 1.59(0) - Installed
Am I missing any components? Do you all have service pack cancelled? Is there any way to reinstall service pack? Cannot see it in updates or in Nokia Suite.
Thanks.

when you click on the "software update" icon, after the check don't you see the option to reinstall?
Greece Nokia X6 RM-559 v40.0.002
Attachments:
Capture.PNG ‏33 KB

Service pack for Symbian Anna 025.007.239.04

G'Day,
I have an N8 Vodafail (Au) 059C7Q4
Symbian Anna 025.007.239.04
Just noticed an update - Anna service pack.
Installed it and noticed messages scroll smoother now.
Installation log did say some improvements have been made for photos too but have not yet had tome to try.
Just wonderin if anyone else out there got this too ?
Cheers.

i just got this too. apparently it's been out for 3 months.
There's no dignity in begging for kudos. Do it for the karma.

Paradoxical Anna Update + Language support for C7 ...

Hello everyone. Please read my description of my problem as currently there is no solution to this unique problem that I have.
I bought my C7 in Australia in July. I sent it to my dealer to install Chinese language, I am not 100% sure what he did but it most likely seem like he flashed the phone firmware so the languages are now English and Chinese Simplified.
Now I've heard about Anna and officials from Nokia said it will be out by late Sept, currently it is mid Oct and I still do not see the update. However, when I go to SW Update on my phone, there is 1 single update, with software version 24. something. There is only this one. On my computer, namely Nokia Ovi Suite (the newest version) as well as Nokia Software Updater, they show no updates. The NSU on my PC show there is nothing to update, but the Ovi Suite say there is an error in my firewall or virus protection that does not allow it to connect to internet. This is ridiculous, I could check the newest apps on the dashboard on Ovi, and I turned off all protection on my computer too. Still I get this message.
How does these two problems come together? I firstly would like to know why I cannot see the Anna update, and only could see 1 update on my phone, where as it should be 3. Secondly, if the problem 1 is solved and I have Anna, there is a chance that the Chinese support will be gone. So can anyone confirm whether the language will be restored to English only or still keep Chinese? As this phone is flashed into Chinese firmware it should not lose its Chinese support, can anyone confirm this?
Many thanks
Nokia C7-00 Symbian Belle RM-675

Hi!
Can you give more details, especially your productcode? (You can find it by tapping *#0000# and it starts with 05**.)
The question if you lose your Chinese language support depends on what exactly the dealer did with your phone, ie. which tools he used to flash it. So, I can't unfortunately this one without having the exact information. If he didn't fully change the productcode (and your phone is still on a supposedly Australian productcode), the update will set your phone back to the state in which it was when it left the factory. Meaning, your language pack will be back to default - without any Chinese characters.
BR,
yvonne

Will symbian anna will be lost after hard reset?

if i hard reset my n8 then symbian anna will be lost?????
And it will display sym 3????

Absolutely not. But you will have to install again the 2 apps pack Symbian Anna 1/2 and 2/2!

Clarification on 025.007 for Symbian Anna products

Hi all,
as you might have noticed we started rolling out a new update version for the Symbian Anna products.
025.007 only contains some error fixes and is therefore not a mandatory update for N8/C7/C6-01/E7/E6/X7. This means, that not all countries/operators will test and approve this version. The rollout is happening in waves, depending on lcoal testing and approval. If you want to get a notification when the update is available for your phone, please switch on the software update auto check. (You can find it under Options in your phone’s Software Update App.)
BR,
yvonne

I received a symbian Anna service pack of size 1040KB which when installed did not change the version to 025,but said it was meant for usability improvements.It will give me better scrolling in messages and help me get quick location info on photos plus more(it was not mentioned what exactly is this "plus").However it added conversation appl, java run time and conversation server to my installed files list.
In Love With My C6-01:Now running on Nokia Belle!

Symbian Anna launch - week38 add-on's

Hi all,
we don’t have new countries added to our Symbian Anna rollout this week, but have Symbian Anna officially live in Bosnia & Croatia now and additionally released more updates for countries that have already launched Anna in the previous weeks. (Attached is as usually the list of product codes that now have Symbian Anna available for download.)
Additional variants added for the following countries:
- Singapore: N8 + C7/E7
- Croatia: T-mobile & Tele2
- Greece: Vodafone
- Portugal: Vodafone
- Poland: Play
- Ireleand: Meteor
- Spain: Vodafone (OviSuite updates only)
- Switzerland: Swisscom
We’re still working on Symbian Anna for US, Canada & Australia.
BR,
yvonne
Attachments:
Symbian Anna 22092011.xls ‏171 KB

skyee wrote:
I guess you've seen my latest announcement of the countries we've just published. So, if you are in Italy, Taiwan or Turkey, you can have a look for your updates.
- 059D8G5 N8 Hungary: The update is already available - please check in OviSuite or via the software update client in your phone.
Skyee Hi, thanks for your answer but my phone is password Hungary but bought in Greece, if we pass to Anna through the ovi suites will miss the Greek language, so I'm asking if you know when it will come through or if local OTA Why is the only way of installation without loss of the Greek language.
Thanks and waiting your reply soon

C7 symbian Anna 2/2 again...

Today my phone showed me two new updates: the Symbian Anna service pack and Symbian Anna 2/2. This is strange because I updated my phone to SA a month ago or so and it seemed to me that both parts were installed at that time. Does my phone show this update in error or is it a legitimate update that I should install?

anna service pack is a new additional update for symbian anna, when i updated mine with the service pack, my phone operate well and faster, no hanging. But the anna 2 of 2, may be u did not update it earlier after the symbian anna update. So i would advice u to do the update.
posted from my nokia x2

Symbian Anna huge Display brightness bug ? !! Be ...

hi
english is not my native language.
i have two nokia c7`s. one with the symbian anna (updated today) and one without the anna update.
the old one has 3 settings for the diplay brightness from min /medium/to max
the c7 updated with anna has only 2. minimum and medium . if you push it to the right= max nothing happend. the brightness still is medium.
the screen is much darker now with symbian anna, even if i set the brightness to max..
is this a bug??. can anyone confirm this? .. if it`s a bug please fix it asap. its horrible. you cant see anything if the sun is shining.
thanks

now i really figured it out.
it´s the light sensor at the top right of the phone. if you are in a dark room or something like that, it turns down brightness automaticly (you only can choose between 2 steps). if you are in a bright room or outside you can turn the brightness up to max in 5 steps.
i dont like this feature. i cannot find a way to turn the light sensor feature off. is there a way??
thanks

Typing experience in Symbian Anna and its touch in...

Coming from a symbian 9.2 device (more exactly the Nokia N95), I've tested Nokia N8 input system before buying it, and I've got very surprised when I've known symbian ^3 had a keyboard layout that simulates the physical alpha numeric keyboard found in non-QWERTY phones (called "alphanumeric keyboard" in Symbian Anna).For an even greater surprise, the "predictive text" feature is also present, what for me, makes "alphanumeric keyboard" the best and fastest one to type.
Of course QWERTY keyboard is cool, but as I live in Brazil, the keys are smaller (to give room for special characters like ^, ~, `,' and c) if I use Portuguese as the Writing Language.On the other hand, the alphanumeric keyboard.has big keys, that are easily selectable.
Although "porting" the keyboard to a touch screen environment was very well done by Nokia in my opinion, there are a few features that were availiable for physical keyboards, and that aren't found in its touch screen counterpart.Below are the improvements that could also by ported, allowing an even faster typing experience in Symbian ^3 phones, and that would make typing almost perfect: (everything you read below is based on my experience as an user of a Nokia N8 with Symbian Anna, version 025.007)
-Multi-touch support for the key pressing.This is the number one addition, and the one I'd choose if only one of the improvements stated here could be done.Currently, only one key can be pressed at a time when typing, and that really slow things down, specially when you alternate keys using both fingers.Commonly, you find out the desired key didn't have its input processed cause you were already holding another key when the later was pressed.In physical keyboards of phones running (for example) Symbian 9.2, at least two keys can be securely pressed at the same time, and both inputs are processed
-Navigate by word.When Predictive text is active, and you move the cursor to some word, it could be underlined, meaning you could navigate quickly through words, and most importantly, make corrections more easily.Let's imagine you are trying to write the word "congratulations".After typing "congratu", you unwillingly press space, thus going out of the word.If you move the cursor back to it, i doesn't "stick" to the word.Instead, it just navigate through the letters.To complete the word, you'd need to either delete the whole word and rewrite it, or complement it as an independent word (typing with predictive text disabled, for example).If the same behaviour available to physical alphanumeric keyboards were implemented, it would be very easier to correct words, as moving the cursor to some word would cause it to stick to that word, entering immediately into an active prediction of that word.
- # key as "previous" during prediction.When you are typin some word with predictive text active, * key move forward in the matches list, but # key does absolutely nothing.In Nokia N95, for example, pressing it would go to previous word in list.
The following isn't a feature that were available in previous phones, it's just an improvement to the input system that could be implemented:
- Double-click in a word would select it, and a triple-click would select the whole text.It's possible in an other operating system for phones, and that makes it very easy to select text.
Please post your tips and feelings about the typing system in Symbian ^3 (related to touch input system).
Note: This goal of this post is to state some things that counld be improved by Nokia when releasing new updates
Best Regards

messenges will never ever ever ever work if both devices use the same appleID

Window 8.1 Chinese character cannot display properly in a game even though I have downloaded and install all chinese language packs

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.

Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support

Language packs: Everything's at 99%

Hi,
I've got WSUS on Server 2012 R2 and 10 Server 2012 R2 servers.
WSUS is quite happily installing all the patches, but they're all stuck at 99% compliance. They're all reporting back that the UK language pack KB2839636 isn't installed.
They all have English-UK set as their default language and display language. KB2839636 doesn't appear in Windows Update.
How can I get this update installed and get 100%?
P.S. I hate language packs :)
Gary

Hi Lawrence,
It's not pending reboot. Here's the log from the last check:
AU #############
AU ## START ## AU: Search for updates
AU #########
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 1192; does use network; is at background priority
IdleTmr Incremented PDC RefCount for Network to 1
Report *********** Report: Initializing static reporting data ***********
Report * OS Version = 6.3.9600.0.0.196880
Report * OS Product Type = 0x00000007
Report * Computer Brand = Dell Inc.
Report * Computer Model = PowerEdge R610
Report * Platform Role = 4
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
Report * Bios Revision = 6.4.0
Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 6.4.0
Report * Bios Release Date = 2013-07-23T00:00:00
Report * Bios Sku Number unavailable.
Report * Bios Vendor = Dell Inc.
Report * Bios Family unavailable.
Report * Bios Major Release = 6
Report * Bios Minor Release = 4
Report * Locale ID = 2057
Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 1]
AU <<## SUBMITTED ## AU: Search for updates [CallId = {BA175319-92D4-4973-B213-BF845EE5B592} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 1]
Agent *************
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 1]
Agent *********
Agent * Online = Yes; Ignore download priority = No
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
Agent * Search Scope = {Machine & All Users}
Agent * Caller SID for Applicability: S-1-5-18
SLS Retrieving SLS response from server...
SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=41&L=en-US&P=&PT=0x7&WUA=7.9.9600.16422
Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab:
Misc Microsoft signed: Yes
Misc Infrastructure signed: Yes
Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP44DE.tmp:
Misc Microsoft signed: Yes
Misc Infrastructure signed: Yes
EP Got WSUS Client/Server URL: "http://cswsus01:8530/ClientWebService/client.asmx"
Setup Checking for agent SelfUpdate
Setup Client version: Core: 7.9.9600.16422 Aux: 7.9.9600.16384
EP Got WSUS SelfUpdate URL: "http://cswsus01:8530/selfupdate"
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
Misc Microsoft signed: Yes
Misc Infrastructure signed: Yes
Misc WARNING: Cab does not contain correct inner CAB file.
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
Misc Microsoft signed: Yes
Misc Infrastructure signed: Yes
Setup Wuident for the managed service is valid but not quorum-signed. Skipping selfupdate.
Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
Setup SelfUpdate check completed. SelfUpdate is NOT required.
PT +++++++++++ PT: Synchronizing server updates +++++++++++
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://cswsus01:8530/ClientWebService/client.asmx
PT WARNING: Cached cookie has expired or new PID is available
EP Got WSUS SimpleTargeting URL: "http://cswsus01:8530"
PT Initializing simple targeting cookie, clientId = b9ba36f9-75b6-417b-91aa-24254762ed9f, target group = , DNS name = machine.company.local
PT Server URL = http://cswsus01:8530/SimpleAuthWebService/SimpleAuth.asmx
Agent Reading cached app categories using lifetime 604800 seconds
Agent Read 1 cached app categories
PT + SyncUpdates round trips: 2
Agent * Found 0 updates and 69 categories in search; evaluated appl. rules of 470 out of 659 deployed entities
Agent Reporting status event with 1 installable, 25 installed, 0 installed pending, 0 failed and 0 downloaded updates
Agent *********
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 1]
Agent *************
IdleTmr WU operation (CSearchCall::Init ID 1, operation # 1192) stopped; does use network; is at background priority
IdleTmr Decremented PDC RefCount for Network to 0
AU >>## RESUMED ## AU: Search for updates [CallId = {BA175319-92D4-4973-B213-BF845EE5B592} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
AU # 0 updates detected
AU #########
AU ## END ## AU: Search for updates [CallId = {BA175319-92D4-4973-B213-BF845EE5B592} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
AU #############
AU All AU searches complete.
AU AU setting next detection timeout to 2014-02-07 22:42:04
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

Problem installing Windows Server 2008 R2 Service Pack 1 Multilingual User Interface Language Packs

I downloaded Windows6.1-KB2483139-x64-en-US.exe but when I ran it on my Windows Server 2008 R2 SP1 (as Administrator) it does not run properly. I noticed it created a new cabinet file named "lp" briefly, then deleted it. Nothing else
appears on the screen.
My goal is to install Chinese display fonts on my server. Please help.

Hi,
First of all, if you want Chinese display language, you need to choose chinese in the drop down list on the download page. Here's a direct link in case you need it.
http://www.microsoft.com/en-us/download/details.aspx?id=2634(chinese simplified...)
Windows6.1-KB2483139-x64-zh-CN.exe is the file name for the Chinese simplified language pack.
1. The exefile extracts the file cabinet lp.cab which is the file you need to import the language pack.
2. Start lpksetup.exe and Point out the cab-file you just extracted.
If you want to do it with cmdline, you can do it with dism in an elevated command prompt as well:
Dism /online /Add-Package /PackagePath:C:\test\lp.cab
Note that you still need to create a policy or change default language in some way for your users.
Read more on the topic on:
http://technet.microsoft.com/en-us/library/dd744278(v=ws.10).aspx (adding)
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7f019a90-8e48-4bc3-a9d2-e3c531354d04/how-to-use-group-policy-to-define-terminal-users-display-language-in-2008r2-terminal-servers (creating
gpo)
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

Cannot open Language settings from Tile view, and unable to install Language packs from WSUS.

Hi all,
I have a bunch of Windows 2012 R2 servers that have been deployed from a syspreped image where the language has been defaulted to "en-GB", rather than the default "en-US".
I also have a WSUS 3 server running on a Windows 2008r2 machine. This tells me that a number of language packs are required by these 2102r2 machine, namely:
KB2839636 - English (United Kingdom) Language Pack
KB2839636 - English (United States) Language Pack
KB3012997 - English (United Kingdom) Language Pack
KB3012997 - English (United States) Language Pack
These have been approved to be installed on the 2012r2 machine, however, running Window Update on the machines shows nothing. Opening the Control panel, then navigating to "Add Language", then "options", shows no additional updates.
The I tried to search and run the languages control panel directly from the Windows Tile view by simply typing "language" and clicking the 'Language' option in the search results, but then get the following error dialogue box:
[Window Title]
C:\Users\Administrator\AppData\Local\Packages\windows.immersivecontrolpanel_cw5n1h2txyewy\LocalState\Indexed\Settings\en-GB\Classic_{bf782cc9-5a52-4a17-806c-2a894ffeeac5}.settingcontent-ms
[Content]
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.
The issue I have here is that I am logged on with the Domain Admin profile, but the path above refers to the local admin profile - however the file listed has full permissions for all 'Administrators'.
So I have two questions:
How should the Language pack updates get installed from WSUS?
How do I fix the problem with trying to open the Language option direct from the tile search view?
Many thanks
Chris

Might try these ones.
http://www.urtech.ca/2014/09/solved-windows-cannot-access-the-specified-device-path-or-file-appdatalocalpackageswindows-immersivecontrolpanel/
http://www.reddit.com/r/techsupport/comments/27hbal/cannot_access_immersivecontrolpanel/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Symbian Anna Slovenian Language pack?

Similar Messages

Maybe you are looking for