Symbian reading only last 6 digits problem! critic...

I was told that the problem with symbian phones reading only the last 6 digits of the callers phone number has been around for some time now.
Let me explain to all the people that do not know what i'm talking about:
The problem is that the phone only reads the last 6 numbers of the callers phone nubmer and then searches your contacts for this number. Well that works "ok" untill you have a phone number like 041-XYZ-XYZ and 031-XYZ-XYZ stored in your phone book. Now there are 3 possible outcomes:
1.) You have neither of the number stored in your phonebook = you will get the correct caller NUMBER displayed
2.) You have one of the numbers in your phonebook = no mater which number calls you, the ID will allways be the number you have stored.
3.)in the 3rd case where you have both numbers stored, you will get the right number that is calling you, but not the caller ID of that number that you have stored in your phonebook.
So, my question is, IS NOKIA PLANNING TO RELEASE A FIX FOR THIS??? Because it's been here for too long! I had a nokia 6234 before my n78 now, and this problem was fixed there, have in mind that the 6234 is 2 years older!
So how come that you cannot make a software update for symbian smart phones in at least 2 years? After all they are called SMART PHONES.
Nokia help center from slovenia didn't have an answer wheter there is a fix on this problem beeing made....
Please help, it's realy anoing, and talk about identity theft (it works the same with SMS's too) --> Whats the presidents and his secretary number again?!
Message Edited by slayercek on 05-Jan-2009 06:16 PM
Message Edited by slayercek on 05-Jan-2009 06:17 PM
Message Edited by slayercek on 05-Jan-2009 06:19 PM
Message Edited by slayercek on 05-Jan-2009 06:20 PM

@ slay, if you want to tell something to Nokia use the 'contact us' button in the upper right hand side of this page. this is a user to user forum. Nokia will not hear you on these boards at least not in official capacity, nor will they respond to your plea...just keep that in mind.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

  • How to display only last 4 digits of tax number in Vendor Master view MK03

    Dear experts,
    In the Vendor Master view by Purchasing Organization (MK03), is there a way that will allow the user to view only the last four digits of the Vendor tax number?
    For example: Display only **-*-6789 (or blank spaces), instead of 123-45-6789 ?
    Any ideas and insights are much appreciated. Will award points for help.
    -TW

    In your report, just do a substr(ssn,5,4) for your new & improved SSN field to be displayed:
    SELECT First,
    Last,
    SUBSTR(ssn,5,4),
    Phone
    FROM Employees
    Thank you,
    Tony Miller
    Webster, TX

  • Read only file system and Problems witth pacman -S

    Hi im a newbie at Arch, and i have 2 problems...
    1) When I log in as a root user i can't modify any of the configuration files cause i only have a " Read only file System" does anyone know how  I can  change this cause im sick of using my live cd to modify the files i need to change..
    2) I have problems with pacman -S it says " Unable to lock database if you're sure pacman is not already running you can remove /tmp/pacman.lck"
    when i do rm /tmp/pacman.lck it says that it can't be done cause the file doesn't exist.. and Im sure that my dhcp and dns is working fine... (just in case of any wonder)
    Well if someone could help me i really would appreciate it
    thanks

    # <file>      <dir>           <type>     <options>           <dump>      <pass>
    none                 /dev/pts        devpts     defaults               0          0
    none                 /dev/shm        tmpfs      defaults           0          0
    /dev/cdrom           /mnt/cd          iso9660   ro,user,noauto,unhide  0          0
    /dev/dvd             /mnt/dvd         udf       ro,user,noauto,unhide  0          0
    /dev/fd0         /mnt/fl          vflat     user,noauto            0          0   
    /dev/hda6          swap            swap      default                0          0
    /dev/hda5/            ext3        defaults      0  0
    /dev/hda7/mnt/windows vfat  rw,usev,auto,umask = 000 0 0
    fsck -fC /dev/hda5 didnt work it said... "Error while executing fsck.ext3 for /dev/hda5

  • Masking a String with only last 2 digits displayed

    Hi,
    I will get a list of account numbers from the DB which I need to mask it with "$" except the last 2 characters. It will be numeric
    and the size is 15 in DB. Like for example , i may get the account numbers which are of 10 character width as well as 15 character width but still i need to parse
    the account number and display only the last 2 numbers in it with other numbers masked with "$".
    Like $$$$$$$$$$$$$54 for 15 digit account number. The above needs to be done with in a loop as there a list of account numbers which
    will be retreived from the DB. Which is the best possible way to do this?
    Thanks,
    CrazyJavaLover

    jduprez wrote:
    What a man Sabre150, a single line which solved the problem. I was thinking regex . Thanks you very much.Impressive. But I would implement Winston's suggestion to isolate that in a method with a meaningful name and proper Javadoc. No problem - I would do the same.
    For me regexp-impaired, this one-line expression is as cryptic as Wookian.I often see statements like this. Would you advise Java programmers not to use Java templates because they can make code very difficult to follow for people who have not studied them? Would you advise programmers to use simple linear search rather than the Knuth-Morris-Pratt search algorithm because KMP functionality may not be obvious to the people who have to maintain the software? Would you advise programmer not to use the FFT algorithm but to use a simplistic DFT algorithm because the maintainers may not understand the FFT? I hope not.
    That very short regular expression may not be part of regex101(though I think it could be) but if one understands the very basics of regex then one can get the essence. In regex, a single '.' stands for any character. The term '(?=..)' is a positive look ahead for any two characters so '.(?=..)' says look for any character that is followed by two more.
    The replaceAll() says every time you find a character followed by two more then replace it with a '$'. Obviously only the last two characters are not followed by two more so they do not match. The '\ \' is needed because '$' is a meta-character when used in the replacement so it needs escaping with a '\' prefix but since '\' is a meta character in Java Strings literals the '\' needs escaping.

  • Cannot retrieve all vector objects - reading only last line .. Please help

    <pre>
    When I test the vector in the method that adds the elements, each line is returned. Testing the vector in the method getData(), all items are returned within the while loop, but the test returns only the last line of in the vector. Can anyone help me out and let me know what I'm doing wrong.
    Here's a summary of what I'm doing and the code follows.....
    My bean class:
    - creates a vector and adds several lines to the vector
    - using StringTokenizer and Enumeration, parses the data and checks to see if the line has the required amount of tokens (which is 4). If so, then the string is passed to my main class
    In the main class, the string is parsed into its appropriate attribute and then the required ones are displayed in the browser.
    //Vector class bean
    public SpecBean()
    public Vector addData()
    vecdata.addElement ("3|4||");
    vecdata.addElement ("2|3||1200");
    vecdata.addElement ("1|2|Q|");
    vecdata.addElement ("4|2|U|4356");
    return vecdata;
    public String getData()
    StringTokenizer st;
    String record = new String();
    Enumeration enumdata = vecdata.elements();
    while (enumdata.hasMoreElements())
    record = enumdata.nextElement().toString();
    System.out.println (record);
    st = new StringTokenizer( record, "|");
    int numberOfTokens = st.countTokens();
    if (numberOfTokens < 4)
    record = "Incomplete Data";
    return record;
    // end class...
    //begin main class -- this is a servlet which is why the
    //out.println statements are there
    try {
    SpecBean specs = new SpecBean();
    specs.getItemListing();
    token = new StringTokenizer ((String)specs.getData(), "|");
    out.println ("<table width=\"100%\" border=1>");
    out.println("<tr>");
    out.println ("<td width=\"40%\">");
    while (token.hasMoreTokens())
    String id = token.nextToken();
    String orderNum = token.nextToken();
    String name = token.nextToken();
    String confNum = token.nextToken();
    out.println (title + "</td>");
    out.println ("<td width=\"20%\" align=\"right\">" + "$" + price + "</td>");
    out.println ("<td width=\"40%\">" + notes);
    //end main class
    Thank you.

    <pre>
    My apologies. What I was looking to do was return EVERY line from the vector that had an equivalent of 4 tokens and no less. I just realized that the sample data I had entered into the vector only had one line w/ 4 tokens. When this is modified and there are 2+ lines that contain 4 tokens, the only line that is retrieved is the very last line. So if the data in the vector was:
    public Vector addData()
    vecdata.addElement ("3|4|rtd|222");
    vecdata.addElement ("2|3||1200");
    vecdata.addElement ("1|2|QsT|");
    vecdata.addElement ("4|2|U|4356");
    return vecdata;
    public String getData()
    StringTokenizer st;
    String record = new String();
    Enumeration enumdata = vecdata.elements();
    while (enumdata.hasMoreElements())
    record = enumdata.nextElement().toString();
    System.out.println (record);
    st = new StringTokenizer( record, "|");
    int numberOfTokens = st.countTokens();
    if (numberOfTokens < 4)
    record = "Incomplete Data";
    return record;
    The output to the browser is
    4 2 U 4356
    and not
    3 4 rtd 222
    4 2 U 4356
    I did some print statements throughout addData() and getData() to see if all of the objects in the vector were still there and everything checked out until I hit the end of the getData(). Before 'return record' the print statement returned '4 2 U 4356' only. I'm not sure what I have missed to have the getData() method return only one matching line and not all of them.
    Your help is appreciated. Thank you.

  • How to display the "display values" in READ Only mode for a SHUTTLE

    Hi,
    I have a form item of type *'Shuttle'* and using the following LOV.
       select DEPTNAME d, DEPTNO r
        from  DEPTIn normal mode..it displays the department name and internally store the Deptno..
    Now I converted this item to Read Only mode using Read Only Condition Type
    the problem is as soon as it becomes read only...it displays the deptno....not the department name
                Department-   10:20:30How can I display the "display values" i.e the actual department name in read only mode..
                Department-   Department1:Department2:Department3Thanks,
    Deepak

    Hi,
    It seems feature. Shuttle is span tag when it is read only.
    Work around could be that
    you compute display as text item with LOV display value according shuttle session state and show shuttle and this item conditionally depend case
    Br, JAri

  • ITunes Keeps Freezing, Music Folders Keep Being Marked Read-Only???  HELP!!

    Recently I have been completely unable to access my iTunes for more than 15 seconds before it freezes up and I have to end the program. When I checked the properties for my My Music folder and my iTunes Music folder (and all the folders within these folders), I noticed that the Read-Only box is marked - not checked, but filled with another, smaller box.
    When I uncheck the read-only box on all the folders and go back up to the My Music folder, I check the properties and notice that it is STILL marked as Read-Only. This is driving me completely insane, as I can do NOTHING with my iTunes without it freezing. Can someone please help me out???

    It's normal for folders to be marked read only, what ever your problem is, it is not this.
    Have you seen this article on troubleshooting freezes:
    http://docs.info.apple.com/article.html?artnum=302856

  • InDesign lock files, read only permissions...

    I've had this strange problem for over a year now, unsure as to why it was happening. Now I've realized what the problem is, but I don't know how to fix it.
    We build ads in InDesign. Production, who builds the ads, has basically full control to the ads network drive. Sales, on the other hand, has only read access. They want to print ads out on occasion, but I don't want them to be able to screw the ad up by mistake (they know just enough to get the ad to print).
    Here's the problem...
    Someone one sales opens an ad. Well, they don't have create or write permissions (Win 2003 server, XP workstations). So the InDesign lock file is never created. But they do obtain a read lock on the file on a Windows/OS level.
    So what happens is, the production staff opens the ad while the sales person opens the ad. There's no lock file, so the production person isn't warned that the file is open. But because there's an OS lock on the ad, the ad opens for the production staff, but it opens as read only.
    My first problem is that I don't know how to fix this without giving our sales people full access, which I cannot do. The second problem is that any app that happens to access those files (shadow copy perhaps???) will cause the same headache for the production staff, as there is contention to the file.
    So I'm in a catch-22 here. I'm wondering if any of you have been in the same boat and know if there is a work around.
    We're using InDesign 3 (CS) on XP.

    Or export to PDF every time the ad is updated, and only give them access to the PDFs through Reader - keep them away from InDesign completely. If you are only giving them InDesign to view ads, you could save money on unnecessary InDesign licenses.
    k

  • Can I make a LOB segment tablespace 'READ ONLY' so no backup?

    Greetings
    Environment: Oracle 11.2.0.3 on Solaris 10.5
    LOB newbie here.
    I am currently supporting a database, but not the application, that is loading fairly large XML files into CLOB columns. Today I have 121 LOBSEGMENTs taking up about 1GB of space and in the same tablespace as the owner table.
    I understand that the CLOB data will not be changing that often.
    My issue is now my RMAN backup is much larger and is filling the mount point where the backup files are stored.
    I'd like to move the LOBSEGMENT objects to a different tablespace, back it up once and mark the tablespace as READ ONLY so it doesn't get backed up every time.
    I am currently doing a full database backup every day and archivelog backups every 4 hours.
    Can I use something like: ALTER TABLE 'X' MOVE LOB 'Y' STORE AS TABLESPACE 'Z' ?
    Is it then possible to alter the 'Z' tablespace to READ ONLY and not affect the user's ability to update the other parts of the table?
    Other alternatives are most welcome!!
    Thanks very much!!
    -gary

    Thanks for the quick response.
    I don't want you to give up, I'd just like some advice from your experience.
    Even though I am working in a test environment I was hesitant to execute the above commands so as not to cause the application to fail as the user is loading the XML data.
    I want the tablespace storing the LOBSEGMENTs to be READ ONLY but I wasn't sure if I could specify just the LOBSEGMENT part of a row to be READ ONLY without causing update problems for the other columns in the table.
    I realize the new LOBSEGMENT tablespace will be READ ONLY and the original tablespace with the rest of the data will remain READ WRITE.
    Also, I'm assuming if the CLOB data ever needs to change I should be able to alter the tablespace back to READ WRITE, have the user make the changes, be sure the new data is backed up and alter the tablespace back to READ ONLY.
    Is this how you would handle the situation?
    Thanks very much!
    -gary

  • Font style in read-only mode

    Hello VC-Experts
    we are using a form view in read-only mode. The problem is that the text in the fields are grey. That is not very readable for the end users.
    Is there a change to change the text-style in fields to "BOLD" or change the text color to black? 
    I was trying it with an expression box, but the font color is still grey just a little bit darker.
    Thank you very much in advance.
    Kind regards
    Axel

    Hi Basheer,
    set the field to disabled , causes a grey text and and a grey background and is not changable in style tab of expression box.
    But I found an other solution for the problem:
    - Setting the form view to editable
    - Creating a Plain Text field
    - Set Data-Field in Control Properties->Display->Appearance->Label->Formula
    - Set "Text style" to bold in the same tab.
    Thanks, rewarding points
    Regards
    Axel

  • Read only schema issues

    Hello everyone
    I have created a read only schema on oracle Apps and have granted select privileges to all synonyms and views and execute privileges to packages.
    The read only schema is unable to access some synonyms and views below is the example:
    conn to read only schema
    select * from HR_ALL_ORGANIZATION_UNITS
    'no rows returned'
    Note: - The above is a view, and the view's script contains 2 tables hr_all_organization_units and hr_all_organization_units_tl.
    Please help me on this
    Thanks and Regards
    Shahrukh Yasin

    Hi
    There is one function "show record" which is giving FALSE when i run the below query on read only schema
    select hr_security.show_record('HR_ALL_ORGANIZATION_UNITS',171) from dual
    and when i run it from APPS Schema it gived TRUE.
    I have already given execute privileges on ALL the database PACKAGE, PACKAGE BODY, FUNCTION, PROCEDURE to read only schema, but the problem is same
    Thanks and Regards
    shahrukh Yasin

  • The Index Server is in Read Only Mode

    Hi,
    In our test environment ALL of our jobs are failing. The message in every failed Job Log is:
    11/18/05 10:25:15- Starting to run operations (1 total) for job 'Search Update 2 - Run Once'. Will stop on errors. (PID=14064)11/18/05 10:25:16- *** Job Operation #1 of 1: System Agent 'Search Update Agent' [Run as owner 'Administrator']11/18/05 10:25:16- The index server is in read-only mode.11/18/05 10:25:16- The index Server is inaccessible. Search Update cannot continue and will terminate.11/18/05 10:25:16- *** Job Operation #1 failed: Call to perform operation #1 failed with error (0x80044301): (null) (0x4)11/18/05 10:25:16- Call to perform operation #1 failed with error (0x80044301): (null)
    has anybody seen this before, and how can I correct it?
    Thanks,Shawn

    The search server goes into read only mode in response to certain error conditions.  Simply restart the service to put the search server back into R/W mode.  The server will attempt to self repair on startup.  You should review your recent search server logs to see if there are errors that may have caused the transition to read only mode.  If problems persist, contact tech support for further assistance in troubleshooting.

  • Last four digits

    Hi
    I working  BW with HR Recently i got requirement such a way i want show only LAST 4 digits of the PERNR number Actually my PERNR has 9 characteristic in length but i want to display it into last 4 DIGITS characteristic in my report XXXXX-3456 How can we do in back end side 0r front end side which is more reliable ? can you let me know is there logic behind it ?
    Regards
    Ram

    Hi
    I'm trying to get solve but it not coming proper out
    I want to get last 4 digits number  but i'm getting that 9.999 so what i did is...
    Initially when i created formula i given description as 0emppernr when i tried to created new formula what i did is i drag that old formula and multiplied by 1000
    *'0emppernr' * 1000?* is it correct method ,but after executing of report i'm getting some different solution
    can you let me know how to multiple *FRAC ( 'DEP SSN OFFSET 4' / 10000 ) * 10000* by 1000 i'm tried my best i not getting proper solution  now i'm getting 9.999 if i multiple by 1000 the output should get  9999 ..
    Any one has idea how to reslove ?
    Regards
    Ram
    Edited by: RAM KUMAR KUTTI on Oct 15, 2009 8:28 PM

  • In Lion, Word for Mac only prints last two digits of year

    In Snow Leopard, the automatic dates that auto fill in Word for Mac (08, 2011) worked fine...BUT since I 'upgraded' to Lion, (10.7.3) only the last two digits of the year will autofill, EVEN in full date mode...ie, SHOULD BE:
    February 21, 2012
    BUT auto filled as: February 21, 12
    I saw on a MS help site that it's ID'ed as a problem in Lion:
    From http://answers.microsoft.com/en-us/mac/forum/macoffice2008-macword/automatic-dat e-entry-doesnt-enter-entire-year/91793432-006b-4f6a-99fa-cf425266cb84
    This was the query:
    automatic date entry doesn't enter entire year
    Applies To: Office for Mac | Office 2008 for Mac | Word for Mac
    When I enter the weekday at the beginning of a sentence, the month, date and year are automatically filled in. However, instead of having the whole years, such as 2011, it only enters the last two digits, such as "11". This is new since an update a month or so ago. I would like to set it back to the original "Friday, November 04, 2011" if possible.
    Appreciate any help I can get.
    ANSWER:
    Its a bug in OSX.7 evidently MS has not rung up Apple and said hey get off your duff and fix this date issue.  If you can find a place to send bug report to Apple do so.
    So I checked the OSX Lion support site on apple.com and could not find an answer.
    Does anyone know how to fix or how to get Apple to fix?
    Thank you.

    It's a bug, but whether it's a bug for Apple to fix or for Microsoft to fix is unknown. The thread you post is unauthoritative, being only comments by other users who have no more idea as to where the bug really lies (unless an Apple engineer has confirmed a Lion bug, something I've not seen) as any other user does; no one in that thread works for or speaks for either Microsoft nor Apple.
    You can comment on the issue to Apple, if you wish:
    http://www.apple.com/feedback/macosx.html
    but whether it's something they can fix or whether it's Microsoft's problem I can't say.
    Regards.

  • Read only filesystem problem

    Hi,
    I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs.
    If i tried to remount it read-write using command
    mount -o remount,rw /
    i got this:
    sudo: unable to open /var/db/sudo/uiii/3: Read-only file system
    mount: /dev/mapper/VG0-archlinux2: can't read superblock
    Only reboot helps.
    my machine is (uname -a):
    Linux uiii-arch 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
    /etc/mtab (when problem occured):
    rootfs / rootfs rw 0 0
    proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
    sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
    dev /dev devtmpfs rw,nosuid,relatime,size=1990100k,nr_inodes=497525,mode=755 0 0
    run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
    /dev/mapper/VG0-archlinux2 / reiserfs ro,relatime 0 0
    devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
    tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
    /dev/sda1 /boot ext2 rw,relatime 0 0
    /dev/mapper/VG0-uloziste /mnt/uloziste ext4 rw,relatime,data=ordered 0 0
    binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
    gvfs-fuse-daemon /home/uiii/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
    dmesg output is this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012
    [ 0.000000] Command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD4/GA-MA790X-UD4, BIOS F3 06/03/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
    [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000130000000 aka 4864M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
    [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1f9fd000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
    [ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfede000-0xcfedffff]
    [ 0.000000] RAMDISK: [mem 0x7fc62000-0x7fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 00000000cfee30c0 05980 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000cfee0000 00040
    [ 0.000000] ACPI: SSDT 00000000cfee8b00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 00000000cfee9400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 00000000cfee9440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: TAMG 00000000cfee9480 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
    [ 0.000000] ACPI: APIC 00000000cfee8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x12fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
    [ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
    [ 0.000000] On node 0 totalpages: 1048175
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83392 r8192 d23104 u524288
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028713
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 3980204k/4980736k available (4645k kernel code, 788036k absent, 212496k reserved, 4207k data, 760k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.003333] Fast TSC calibration using PIT
    [ 0.006666] Detected 2813.035 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.48 BogoMIPS (lpj=9376783)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000031] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000260] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002140] Mount-cache hash table entries: 256
    [ 0.002315] Initializing cgroup subsys cpuacct
    [ 0.002317] Initializing cgroup subsys memory
    [ 0.002326] Initializing cgroup subsys devices
    [ 0.002327] Initializing cgroup subsys freezer
    [ 0.002328] Initializing cgroup subsys net_cls
    [ 0.002330] Initializing cgroup subsys blkio
    [ 0.002349] tseg: 00cff00000
    [ 0.002351] CPU: Physical Processor ID: 0
    [ 0.002352] CPU: Processor Core ID: 0
    [ 0.002353] mce: CPU supports 6 MCE banks
    [ 0.002358] LVT offset 0 assigned for vector 0xf9
    [ 0.002362] using AMD E400 aware idle routine
    [ 0.002998] ACPI: Core revision 20120320
    [ 0.019730] ftrace: allocating 17970 entries in 71 pages
    [ 0.027072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060076] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
    [ 0.165799] Performance Events: AMD PMU driver.
    [ 0.165802] ... version: 0
    [ 0.165803] ... bit width: 48
    [ 0.165803] ... generic registers: 4
    [ 0.165804] ... value mask: 0000ffffffffffff
    [ 0.165805] ... max period: 00007fffffffffff
    [ 0.165806] ... fixed-purpose events: 0
    [ 0.165807] ... event mask: 000000000000000f
    [ 0.185858] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.199154] Booting Node 0, Processors #1 #2
    [ 0.235675] Brought up 3 CPUs
    [ 0.235679] Total of 3 processors activated (16884.46 BogoMIPS).
    [ 0.239344] devtmpfs: initialized
    [ 0.240745] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
    [ 0.241490] NET: Registered protocol family 16
    [ 0.241574] node 0 link 0: io port [c000, ffff]
    [ 0.241576] TOM: 00000000d0000000 aka 3328M
    [ 0.241578] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
    [ 0.241580] node 0 link 0: mmio [a0000, bffff]
    [ 0.241582] node 0 link 0: mmio [d0000000, dfffffff]
    [ 0.241584] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.241586] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
    [ 0.241588] TOM2: 0000000130000000 aka 4864M
    [ 0.241589] bus: [00, 03] on node 0 link 0
    [ 0.241590] bus: 00 [io 0x0000-0xffff]
    [ 0.241591] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.241592] bus: 00 [mem 0xd0000000-0xdfffffff]
    [ 0.241593] bus: 00 [mem 0xe0400000-0xffffffff]
    [ 0.241594] bus: 00 [mem 0xe0100000-0xe03fffff]
    [ 0.241595] bus: 00 [mem 0x130000000-0xfcffffffff]
    [ 0.241649] ACPI: bus type pci registered
    [ 0.241696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.241698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.252350] PCI: Using configuration type 1 for base access
    [ 0.252819] bio: create slab <bio-0> at 0
    [ 0.252870] ACPI: Added _OSI(Module Device)
    [ 0.252871] ACPI: Added _OSI(Processor Device)
    [ 0.252872] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252873] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253366] ACPI: EC: Look up EC in DSDT
    [ 0.258796] ACPI: Interpreter enabled
    [ 0.258802] ACPI: (supports S0 S3 S4 S5)
    [ 0.258819] ACPI: Using IOAPIC for interrupt routing
    [ 0.261632] ACPI: No dock devices found.
    [ 0.261636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.261677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.261731] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.261733] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.261735] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.261737] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.261738] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [ 0.261768] PCI host bridge to bus 0000:00
    [ 0.261770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.261772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.261773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.261775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.261777] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
    [ 0.261786] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
    [ 0.261797] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.261830] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
    [ 0.261858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.261878] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
    [ 0.261906] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.261931] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    [ 0.261949] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
    [ 0.261958] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.261967] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.261976] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.261985] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.261994] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.262013] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.262058] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262070] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.262132] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262145] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.262212] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262230] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    [ 0.262309] pci 0000:00:12.2: supports D1 D2
    [ 0.262311] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262334] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262346] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.262408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262421] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.262493] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262511] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.262590] pci 0000:00:13.2: supports D1 D2
    [ 0.262591] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262616] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.262711] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.262726] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.262735] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.262744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.262753] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.262762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
    [ 0.262817] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.262837] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.262901] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.262915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.262987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.263028] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.263041] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    [ 0.263105] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.263119] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.263130] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.263141] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.263155] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.263201] pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
    [ 0.263210] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.263219] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.263229] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.263235] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
    [ 0.263242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.269149] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.269155] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.269157] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.269161] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.269200] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.269213] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
    [ 0.269232] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
    [ 0.269245] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
    [ 0.269253] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.269300] pci 0000:02:00.0: supports D1 D2
    [ 0.269301] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.275814] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.275820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.275822] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.275825] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.275865] pci 0000:03:07.0: [168c:001a] type 00 class 0x020000
    [ 0.275887] pci 0000:03:07.0: reg 10: [mem 0xfdee0000-0xfdeeffff]
    [ 0.276014] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
    [ 0.276035] pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.276047] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
    [ 0.276136] pci 0000:03:0e.0: supports D1 D2
    [ 0.276138] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
    [ 0.276174] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.276177] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.276181] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.276185] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.276186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.276188] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.276190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.276191] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.276193] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [ 0.276205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.276360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.276399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.276426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.276447] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.276449] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.276450] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.282962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.282993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283158] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283250] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.283252] vgaarb: loaded
    [ 0.283253] vgaarb: bridge control possible 0000:01:00.0
    [ 0.283281] PCI: Using ACPI for IRQ routing
    [ 0.291632] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291638] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.291701] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.291703] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
    [ 0.291778] NetLabel: Initializing
    [ 0.291779] NetLabel: domain hash size = 128
    [ 0.291780] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291789] NetLabel: unlabeled traffic allowed by default
    [ 0.291804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.291807] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.293841] Switching to clocksource hpet
    [ 0.298189] pnp: PnP ACPI init
    [ 0.298200] ACPI: bus type pnp registered
    [ 0.298257] pnp 00:00: [bus 00-ff]
    [ 0.298260] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.298262] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.298264] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.298265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.298267] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.298268] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [ 0.298295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.298303] pnp 00:01: [io 0x0010-0x001f]
    [ 0.298304] pnp 00:01: [io 0x0022-0x003f]
    [ 0.298306] pnp 00:01: [io 0x0044-0x005f]
    [ 0.298307] pnp 00:01: [io 0x0062-0x0063]
    [ 0.298308] pnp 00:01: [io 0x0065-0x006f]
    [ 0.298310] pnp 00:01: [io 0x0074-0x007f]
    [ 0.298311] pnp 00:01: [io 0x0091-0x0093]
    [ 0.298312] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.298313] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.298315] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.298316] pnp 00:01: [io 0x0220-0x0225]
    [ 0.298317] pnp 00:01: [io 0x0290-0x0294]
    [ 0.298353] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.298355] system 00:01: [io 0x0220-0x0225] has been reserved
    [ 0.298356] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.298359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298785] pnp 00:02: [io 0x4100-0x411f]
    [ 0.298789] pnp 00:02: [io 0x0228-0x022f]
    [ 0.298791] pnp 00:02: [io 0x040b]
    [ 0.298792] pnp 00:02: [io 0x04d6]
    [ 0.298793] pnp 00:02: [io 0x0c00-0x0c01]
    [ 0.298794] pnp 00:02: [io 0x0c14]
    [ 0.298796] pnp 00:02: [io 0x0c50-0x0c52]
    [ 0.298797] pnp 00:02: [io 0x0c6c-0x0c6d]
    [ 0.298798] pnp 00:02: [io 0x0c6f]
    [ 0.298799] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 0.298801] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 0.298802] pnp 00:02: [io 0x0cd4-0x0cdf]
    [ 0.298803] pnp 00:02: [io 0x4000-0x40fe]
    [ 0.298804] pnp 00:02: [io 0x4210-0x4217]
    [ 0.298806] pnp 00:02: [io 0x0b00-0x0b0f]
    [ 0.298807] pnp 00:02: [io 0x0b10-0x0b1f]
    [ 0.298808] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 0.298810] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [ 0.298812] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [ 0.298818] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.298844] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
    [ 0.298848] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
    [ 0.298885] system 00:02: [io 0x4100-0x411f] has been reserved
    [ 0.298887] system 00:02: [io 0x0228-0x022f] has been reserved
    [ 0.298889] system 00:02: [io 0x040b] has been reserved
    [ 0.298891] system 00:02: [io 0x04d6] has been reserved
    [ 0.298892] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 0.298894] system 00:02: [io 0x0c14] has been reserved
    [ 0.298896] system 00:02: [io 0x0c50-0x0c52] has been reserved
    [ 0.298897] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.298899] system 00:02: [io 0x0c6f] has been reserved
    [ 0.298900] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.298902] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.298904] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.298905] system 00:02: [io 0x4000-0x40fe] has been reserved
    [ 0.298907] system 00:02: [io 0x4210-0x4217] has been reserved
    [ 0.298908] system 00:02: [io 0x0b00-0x0b0f] has been reserved
    [ 0.298910] system 00:02: [io 0x0b10-0x0b1f] has been reserved
    [ 0.298912] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 0.298914] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.298917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298986] pnp 00:03: [dma 4]
    [ 0.298988] pnp 00:03: [io 0x0000-0x000f]
    [ 0.298989] pnp 00:03: [io 0x0080-0x0090]
    [ 0.298991] pnp 00:03: [io 0x0094-0x009f]
    [ 0.298992] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.299014] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.299038] pnp 00:04: [irq 0 disabled]
    [ 0.299049] pnp 00:04: [irq 8]
    [ 0.299051] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.299070] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.299088] pnp 00:05: [io 0x0070-0x0073]
    [ 0.299108] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.299114] pnp 00:06: [io 0x0061]
    [ 0.299134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.299140] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.299147] pnp 00:07: [irq 13]
    [ 0.299167] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.299271] pnp 00:08: [io 0x03f0-0x03f5]
    [ 0.299272] pnp 00:08: [io 0x03f7]
    [ 0.299279] pnp 00:08: [irq 6]
    [ 0.299281] pnp 00:08: [dma 2]
    [ 0.299312] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.299438] pnp 00:09: [io 0x03f8-0x03ff]
    [ 0.299445] pnp 00:09: [irq 4]
    [ 0.299485] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.299507] pnp 00:0a: [io 0x0060]
    [ 0.299509] pnp 00:0a: [io 0x0064]
    [ 0.299516] pnp 00:0a: [irq 1]
    [ 0.299543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.299562] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.299596] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.299598] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.299674] pnp 00:0c: [mem 0x000cda00-0x000cffff]
    [ 0.299675] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [ 0.299677] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [ 0.299678] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [ 0.299680] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
    [ 0.299681] pnp 00:0c: [mem 0xffff0000-0xffffffff]
    [ 0.299682] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.299684] pnp 00:0c: [mem 0x00100000-0xcfedffff]
    [ 0.299685] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.299687] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.299688] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
    [ 0.299692] pnp 00:0c: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299694] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299696] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299698] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299701] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299703] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299745] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.299747] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.299749] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.299750] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.299752] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.299755] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.299768] pnp: PnP ACPI: found 13 devices
    [ 0.299769] ACPI: ACPI bus type pnp unregistered
    [ 0.306130] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
    [ 0.306133] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306135] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.306138] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
    [ 0.306145] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306147] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.306149] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.306152] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306155] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306157] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.306162] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.306165] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.306193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.306195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306198] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306200] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.306202] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.306203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306205] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 0.306207] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.306209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306210] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.306212] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.306214] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306215] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.306217] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.306219] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306220] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306222] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306249] NET: Registered protocol family 2
    [ 0.306336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.307016] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.309549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.309858] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.309859] TCP: reno registered
    [ 0.309868] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309974] NET: Registered protocol family 1
    [ 0.710572] pci 0000:01:00.0: Boot video device
    [ 0.710585] PCI: CLS 4 bytes, default 64
    [ 0.710637] Unpacking initramfs...
    [ 0.774193] Freeing initrd memory: 3700k freed
    [ 0.776235] PCI-DMA: Disabling AGP.
    [ 0.776306] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.776307] PCI-DMA: using GART IOMMU.
    [ 0.776309] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.779581] LVT offset 1 assigned for vector 0x400
    [ 0.779589] IBS: LVT offset 1 assigned
    [ 0.779613] perf: AMD IBS detected (0x0000001f)
    [ 0.779743] audit: initializing netlink socket (disabled)
    [ 0.779753] type=2000 audit(1348861535.663:1): initialized
    [ 0.789269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.790783] VFS: Disk quotas dquot_6.5.2
    [ 0.790820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.790894] msgmni has been set to 7909
    [ 0.791048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.791075] io scheduler noop registered
    [ 0.791076] io scheduler deadline registered
    [ 0.791112] io scheduler cfq registered (default)
    [ 0.791228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.791319] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.791449] GHES: HEST is not enabled!
    [ 0.791503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.812101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.832955] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.833141] Linux agpgart interface v0.103
    [ 0.833180] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.833181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.833304] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.833378] mousedev: PS/2 mouse device common for all mice
    [ 0.833425] rtc_cmos 00:05: RTC can wake from S4
    [ 0.833539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.833571] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.833577] cpuidle: using governor ladder
    [ 0.833578] cpuidle: using governor menu
    [ 0.833689] drop_monitor: Initializing network drop monitor service
    [ 0.833749] TCP: cubic registered
    [ 0.833835] NET: Registered protocol family 10
    [ 0.833965] NET: Registered protocol family 17
    [ 0.833973] Key type dns_resolver registered
    [ 0.834070] PM: Hibernation image not present or could not be loaded.
    [ 0.834076] registered taskstats version 1
    [ 0.834539] rtc_cmos 00:05: setting system clock to 2012-09-28 19:45:35 UTC (1348861535)
    [ 0.835479] Freeing unused kernel memory: 760k freed
    [ 0.835631] Write protecting the kernel read-only data: 8192k
    [ 0.839453] Freeing unused kernel memory: 1488k freed
    [ 0.841313] Freeing unused kernel memory: 612k freed
    [ 0.848497] systemd-udevd[70]: starting version 189
    [ 0.851135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.861403] Floppy drive(s): fd0 is 1.44M
    [ 0.868797] ACPI: bus type usb registered
    [ 0.868817] usbcore: registered new interface driver usbfs
    [ 0.868825] usbcore: registered new interface driver hub
    [ 0.868995] usbcore: registered new device driver usb
    [ 0.869288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.869717] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.869754] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.869763] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.869785] QUIRK: Enable AMD PLL fix
    [ 0.869787] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.869799] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.869827] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    [ 0.871224] SCSI subsystem initialized
    [ 0.872843] libata version 3.00 loaded.
    [ 0.874245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.877166] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.877278] hub 1-0:1.0: USB hub found
    [ 0.877281] hub 1-0:1.0: 6 ports detected
    [ 0.878035] FDC 0 is a post-1991 82077
    [ 0.878198] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.878204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.878211] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.878223] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.878238] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.878264] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    [ 0.887161] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.887266] hub 2-0:1.0: USB hub found
    [ 0.887269] hub 2-0:1.0: 6 ports detected
    [ 0.887719] ahci 0000:00:11.0: version 3.0
    [ 0.887841] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.887844] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    [ 0.888332] scsi0 : ahci
    [ 0.888396] scsi1 : ahci
    [ 0.888447] scsi2 : ahci
    [ 0.888494] scsi3 : ahci
    [ 0.888576] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 0.888578] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 0.888580] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 0.888583] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 0.888675] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.888681] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.888719] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    [ 0.944618] hub 3-0:1.0: USB hub found
    [ 0.944624] hub 3-0:1.0: 3 ports detected
    [ 0.944916] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 0.944922] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 0.944936] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    [ 1.001279] hub 4-0:1.0: USB hub found
    [ 1.001285] hub 4-0:1.0: 3 ports detected
    [ 1.001404] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.001409] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.001435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    [ 1.057932] hub 5-0:1.0: USB hub found
    [ 1.057938] hub 5-0:1.0: 3 ports detected
    [ 1.058071] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.058076] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.058089] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    [ 1.114589] hub 6-0:1.0: USB hub found
    [ 1.114595] hub 6-0:1.0: 3 ports detected
    [ 1.114705] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.114710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.114723] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    [ 1.171271] hub 7-0:1.0: USB hub found
    [ 1.171277] hub 7-0:1.0: 2 ports detected
    [ 1.207184] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.207225] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.300449] usb 2-4: new high-speed USB device number 3 using ehci_hcd
    [ 1.373774] ata2: softreset failed (device not ready)
    [ 1.373843] ata2: applying PMP SRST workaround and retrying
    [ 1.373866] ata1: softreset failed (device not ready)
    [ 1.373934] ata1: applying PMP SRST workaround and retrying
    [ 1.425928] hub 2-4:1.0: USB hub found
    [ 1.426276] hub 2-4:1.0: 4 ports detected
    [ 1.540428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.540459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.541221] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
    [ 1.541224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.542034] ata1.00: configured for UDMA/133
    [ 1.542185] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
    [ 1.552905] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
    [ 1.565919] ata2.00: configured for UDMA/100
    [ 1.567862] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
    [ 1.570090] scsi4 : pata_atiixp
    [ 1.570937] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.570968] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.570970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.570992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.571032] scsi5 : pata_atiixp
    [ 1.571566] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [ 1.571568] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [ 1.574704] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.574707] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.574836] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.583928] sda: sda1 sda2 sda3 sda4
    [ 1.584257] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.677054] usb 5-3: new full-speed USB device number 2 using ohci_hcd
    [ 1.780379] Refined TSC clocksource calibration: 2812.808 MHz.
    [ 1.780391] Switching to clocksource tsc
    [ 1.850813] usbcore: registered new interface driver usbhid
    [ 1.850814] usbhid: USB HID core driver
    [ 1.851297] input: HID 1d57:0005 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
    [ 1.851380] hid-generic 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1d57:0005] on usb-0000:00:13.0-3/input0
    [ 1.914434] usb 2-4.4: new high-speed USB device number 4 using ehci_hcd
    [ 1.925431] device-mapper: uevent: version 1.0.3
    [ 1.925535] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 2.294145] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
    [ 2.294160] REISERFS (device dm-3): using ordered data mode
    [ 2.294161] reiserfs: using flush barriers
    [ 2.294331] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 2.294793] REISERFS (device dm-3): checking transaction log (dm-3)
    [ 2.328438] REISERFS (device dm-3): Using r5 hash to sort names
    [ 3.521243] systemd-udevd[196]: starting version 192
    [ 3.731543] vboxdrv: Found 3 processor cores.
    [ 3.731692] vboxdrv: fAsync=0 offMin=0x421 offMax=0x19b7
    [ 3.731735] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 3.731736] vboxdrv: Successfully loaded version 4.2.0_OSE (interface 0x001a0004).
    [ 4.078334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.078340] ACPI: Power Button [PWRB]
    [ 4.078389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.078391] ACPI: Power Button [PWRF]
    [ 4.118249] wmi: Mapper loaded
    [ 4.264495] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.264551] sp5100_tco: mmio address 0xfec000f0 already in use
    [ 4.266129] EDAC MC: Ver: 2.1.0
    [ 4.308369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
    [ 4.326814] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 4.326881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 4.326938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 4.326984] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 4.327034] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 4.327093] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 4.327137] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 4.327181] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 4.331081] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
    [ 4.331239] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
    [ 4.331244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.370081] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 4.370182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.370266] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.370532] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000656000, 00:24:1d:14:eb:1c, XID 1c4000c0 IRQ 42
    [ 4.370534] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.460371] MCE: In-kernel MCE decoding enabled.
    [ 4.461269] AMD64 EDAC driver v3.4.0
    [ 4.461326] EDAC amd64: DRAM ECC disabled.
    [ 4.461332] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 4.681980] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.870047] firewire_core 0000:03:0e.0: created device fw0: GUID 0019f1ec0000241d, S400
    [ 4.906613] ath5k 0000:03:07.0: registered as 'phy0'
    [ 5.157960] kvm: Nested Virtualization enabled
    [ 5.157964] kvm: Nested Paging enabled
    [ 5.212068] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
    [ 5.212100] powernow-k8: 0 : pstate 0 (2800 MHz)
    [ 5.212101] powernow-k8: 1 : pstate 1 (2100 MHz)
    [ 5.212102] powernow-k8: 2 : pstate 2 (1600 MHz)
    [ 5.212103] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 5.445767] microcode: CPU0: patch_level=0x01000086
    [ 5.513053] ath: EEPROM regdomain: 0x809c
    [ 5.513060] ath: EEPROM indicates we should expect a country code
    [ 5.513064] ath: doing EEPROM country->regdmn map search
    [ 5.513067] ath: country maps to regdmn code: 0x52
    [ 5.513070] ath: Country alpha2 being used: CN
    [ 5.513073] ath: Regpair used: 0x52
    [ 5.720324] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.720419] microcode: CPU1: patch_level=0x01000086
    [ 5.721269] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.721373] microcode: CPU2: patch_level=0x01000086
    [ 5.722356] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.722563] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.801835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 5.802304] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
    [ 6.296710] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.296714] Disabling lock debugging due to kernel taint
    [ 6.309419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 6.309823] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
    [ 6.321474] Linux media interface: v0.10
    [ 6.384863] Linux video capture interface: v2.00
    [ 6.452628] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
    [ 6.469190] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input13
    [ 6.469404] usbcore: registered new interface driver uvcvideo
    [ 6.469407] USB Video Class driver (1.1.1)
    [ 7.020908] usbcore: registered new interface driver snd-usb-audio
    [ 7.051400] set resolution quirk: cval->res = 384
    [ 8.232297] reiserfs: enabling write barrier flush mode
    [ 8.511269] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 8.515067] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 8.556782] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.739934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.452652] wlan0: authenticate with 00:1f:c6:3d:84:ba
    [ 11.461052] wlan0: send auth to 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.462516] wlan0: authenticated
    [ 11.469067] wlan0: associate with 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.470817] wlan0: RX AssocResp from 00:1f:c6:3d:84:ba (capab=0x401 status=0 aid=3)
    [ 11.471130] wlan0: associated
    [ 11.471521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 24.567793] NVRM: GPU at 0000:01:00: GPU-ac314c58-0b61-fb24-fa28-bac76d8e581b
    [ 27.419761] fuse init (API version 7.19)
    [ 31.119563] EXT4-fs (dm-2): re-mounted. Opts: commit=0
    [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    [ 2088.845667] ata1: SError: { HostInt Handshk }
    [ 2088.845674] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845687] ata1.00: cmd 61/08:10:97:ae:07/00:00:1a:00:00/40 tag 2 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845694] ata1.00: status: { DRDY }
    [ 2088.845699] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845711] ata1.00: cmd 61/08:18:b7:ae:07/00:00:1a:00:00/40 tag 3 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845716] ata1.00: status: { DRDY }
    [ 2088.845721] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845732] ata1.00: cmd 61/20:20:bf:ae:07/00:00:1a:00:00/40 tag 4 ncq 16384 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845737] ata1.00: status: { DRDY }
    [ 2088.845742] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845753] ata1.00: cmd 61/c8:28:df:ae:07/00:00:1a:00:00/40 tag 5 ncq 102400 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845758] ata1.00: status: { DRDY }
    [ 2088.845763] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845774] ata1.00: cmd 61/90:30:a7:af:07/00:00:1a:00:00/40 tag 6 ncq 73728 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845779] ata1.00: status: { DRDY }
    [ 2088.845783] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845795] ata1.00: cmd 61/b8:38:37:b0:07/00:00:1a:00:00/40 tag 7 ncq 94208 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845800] ata1.00: status: { DRDY }
    [ 2088.845804] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845815] ata1.00: cmd 61/a8:40:ef:b0:07/00:00:1a:00:00/40 tag 8 ncq 86016 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845820] ata1.00: status: { DRDY }
    [ 2088.845825] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845836] ata1.00: cmd 61/80:48:97:b1:07/00:00:1a:00:00/40 tag 9 ncq 65536 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845841] ata1.00: status: { DRDY }
    [ 2088.845845] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845857] ata1.00: cmd 61/b0:50:17:b2:07/00:00:1a:00:00/40 tag 10 ncq 90112 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845862] ata1.00: status: { DRDY }
    [ 2088.845867] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845878] ata1.00: cmd 61/d8:58:c7:b2:07/00:00:1a:00:00/40 tag 11 ncq 110592 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845883] ata1.00: status: { DRDY }
    [ 2088.845889] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845900] ata1.00: cmd 61/08:d8:8f:ae:07/00:00:1a:00:00/40 tag 27 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845905] ata1.00: status: { DRDY }
    [ 2088.845910] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845922] ata1.00: cmd 61/08:e0:9f:ae:07/00:00:1a:00:00/40 tag 28 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845927] ata1.00: status: { DRDY }
    [ 2088.845931] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845942] ata1.00: cmd 61/08:e8:a7:ae:07/00:00:1a:00:00/40 tag 29 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845947] ata1.00: status: { DRDY }
    [ 2088.845954] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845965] ata1.00: cmd 61/08:f0:af:ae:07/00:00:1a:00:00/40 tag 30 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845970] ata1.00: status: { DRDY }
    [ 2088.845978] ata1: hard resetting link
    [ 2089.329937] ata1: softreset failed (device not ready)
    [ 2089.329948] ata1: applying PMP SRST workaround and retrying
    [ 2089.496590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2089.498245] ata1.00: configured for UDMA/133
    [ 2089.509941] sd 0:0:0:0: [sda]
    [ 2089.509950] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.509956] sd 0:0:0:0: [sda]
    [ 2089.509959] Sense Key : 0xb [current] [descriptor]
    [ 2089.509966] Descriptor sense data with sense descriptors (in hex):
    [ 2089.509969] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.509987] 1a 07 b2 c7
    [ 2089.509996] sd 0:0:0:0: [sda]
    [ 2089.509999] ASC=0x0 ASCQ=0x0
    [ 2089.510004] sd 0:0:0:0: [sda] CDB:
    [ 2089.510006] cdb[0]=0x2a: 2a 00 1a 07 ae 97 00 00 08 00
    [ 2089.510021] end_request: I/O error, dev sda, sector 436711063
    [ 2089.510032] Buffer I/O error on device dm-3, logical block 631
    [ 2089.510035] lost page write due to I/O error on dm-3
    [ 2089.510058] sd 0:0:0:0: [sda]
    [ 2089.510061] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510066] sd 0:0:0:0: [sda]
    [ 2089.510068] Sense Key : 0xb [current] [descriptor]
    [ 2089.510073] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510075] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510091] 1a 07 b2 c7
    [ 2089.510099] sd 0:0:0:0: [sda]
    [ 2089.510101] ASC=0x0 ASCQ=0x0
    [ 2089.510106] sd 0:0:0:0: [sda] CDB:
    [ 2089.510108] cdb[0]=0x2a: 2a 00 1a 07 ae b7 00 00 08 00
    [ 2089.510121] end_request: I/O error, dev sda, sector 436711095
    [ 2089.510126] Buffer I/O error on device dm-3, logical block 635
    [ 2089.510129] lost page write due to I/O error on dm-3
    [ 2089.510140] sd 0:0:0:0: [sda]
    [ 2089.510142] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510146] sd 0:0:0:0: [sda]
    [ 2089.510149] Sense Key : 0xb [current] [descriptor]
    [ 2089.510153] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510155] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510171] 1a 07 b2 c7
    [ 2089.510178] sd 0:0:0:0: [sda]
    [ 2089.510181] ASC=0x0 ASCQ=0x0
    [ 2089.510185] sd 0:0:0:0: [sda] CDB:
    [ 2089.510187] cdb[0]=0x2a: 2a 00 1a 07 ae bf 00 00 20 00
    [ 2089.510200] end_request: I/O error, dev sda, sector 436711103
    [ 2089.510205] Buffer I/O error on device dm-3, logical block 636
    [ 2089.510208] lost page write due to I/O error on dm-3
    [ 2089.510212] Buffer I/O error on device dm-3, logical block 637
    [ 2089.510215] lost page write due to I/O error on dm-3
    [ 2089.510220] Buffer I/O error on device dm-3, logical block 638
    [ 2089.510222] lost page write due to I/O error on dm-3
    [ 2089.510227] Buffer I/O error on device dm-3, logical block 639
    [ 2089.510230] lost page write due to I/O error on dm-3
    [ 2089.510245] sd 0:0:0:0: [sda]
    [ 2089.510248] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510252] sd 0:0:0:0: [sda]
    [ 2089.510254] Sense Key : 0xb [current] [descriptor]
    [ 2089.510258] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510261] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510276] 1a 07 b2 c7
    [ 2089.510284] sd 0:0:0:0: [sda]
    [ 2089.510286] ASC=0x0 ASCQ=0x0
    [ 2089.510290] sd 0:0:0:0: [sda] CDB:
    [ 2089.510293] cdb[0]=0x2a: 2a 00 1a 07 ae df 00 00 c8 00
    [ 2089.510305] end_request: I/O error, dev sda, sector 436711135
    [ 2089.510310] Buffer I/O error on device dm-3, logical block 640
    [ 2089.510313] lost page write due to I/O error on dm-3
    [ 2089.510317] Buffer I/O error on device dm-3, logical block 641
    [ 2089.510320] lost page write due to I/O error on dm-3
    [ 2089.510325] Buffer I/O error on device dm-3, logical block 642
    [ 2089.510327] lost page write due to I/O error on dm-3
    [ 2089.510332] Buffer I/O error on device dm-3, logical block 643
    [ 2089.510335] lost page write due to I/O error on dm-3
    [ 2089.510400] sd 0:0:0:0: [sda]
    [ 2089.510403] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510407] sd 0:0:0:0: [sda]
    [ 2089.510409] Sense Key : 0xb [current] [descriptor]
    [ 2089.510414] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510416] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510432] 1a 07 b2 c7
    [ 2089.510440] sd 0:0:0:0: [sda]
    [ 2089.510442] ASC=0x0 ASCQ=0x0
    [ 2089.510446] sd 0:0:0:0: [sda] CDB:
    [ 2089.510449] cdb[0]=0x2a: 2a 00 1a 07 af a7 00 00 90 00
    [ 2089.510461] end_request: I/O error, dev sda, sector 436711335
    [ 2089.510502] sd 0:0:0:0: [sda]
    [ 2089.510505] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510509] sd 0:0:0:0: [sda]
    [ 2089.510511] Sense Key : 0xb [current] [descriptor]
    [ 2089.510515] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510518] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510533] 1a 07 b2 c7
    [ 2089.510541] sd 0:0:0:0: [sda]
    [ 2089.510543] ASC=0x0 ASCQ=0x0
    [ 2089.510548] sd 0:0:0:0: [sda] CDB:
    [ 2089.510550] cdb[0]=0x2a: 2a 00 1a 07 b0 37 00 00 b8 00
    [ 2089.510563] end_request: I/O error, dev sda, sector 436711479
    [ 2089.510610] sd 0:0:0:0: [sda]
    [ 2089.510613] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510617] sd 0:0:0:0: [sda]
    [ 2089.510619] Sense Key : 0xb [current] [descriptor]
    [ 2089.510623] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510626] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510641] 1a 07 b2 c7
    [ 2089.510649] sd 0:0:0:0: [sda]
    [ 2089.510651] ASC=0x0 ASCQ=0x0
    [ 2089.510656] sd 0:0:0:0: [sda] CDB:
    [ 2089.510658] cdb[0]=0x2a: 2a 00 1a 07 b0 ef 00 00 a8 00
    [ 2089.510670] end_request: I/O error, dev sda, sector 436711663
    [ 2089.510713] sd 0:0:0:0: [sda]
    [ 2089.510716] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510720] sd 0:0:0:0: [sda]
    [ 2089.510722] Sense Key : 0xb [current] [descriptor]
    [ 2089.510727] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510729] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510744] 1a 07 b2 c7
    [ 2089.510752] sd 0:0:0:0: [sda]
    [ 2089.510754] ASC=0x0 ASCQ=0x0
    [ 2089.510759] sd 0:0:0:0: [sda] CDB:
    [ 2089.510761] cdb[0]=0x2a: 2a 00 1a 07 b1 97 00 00 80 00
    [ 2089.510774] end_request: I/O error, dev sda, sector 436711831
    [ 2089.510812] sd 0:0:0:0: [sda]
    [ 2089.510815] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510819] sd 0:0:0:0: [sda]
    [ 2089.510821] Sense Key : 0xb [current] [descriptor]
    [ 2089.510825] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510828] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510843] 1a 07 b2 c7
    [ 2089.510851] sd 0:0:0:0: [sda]
    [ 2089.510854] ASC=0x0 ASCQ=0x0
    [ 2089.510858] sd 0:0:0:0: [sda] CDB:
    [ 2089.510860] cdb[0]=0x2a: 2a 00 1a 07 b2 17 00 00 b0 00
    [ 2089.510873] end_request: I/O error, dev sda, sector 436711959
    [ 2089.510919] sd 0:0:0:0: [sda]
    [ 2089.510922] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510926] sd 0:0:0:0: [sda]
    [ 2089.510928] Sense Key : 0xb [current] [descriptor]
    [ 2089.510933] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510951] 1a 07 b2 c7
    [ 2089.510959] sd 0:0:0:0: [sda]
    [ 2089.510961] ASC=0x0 ASCQ=0x0
    [ 2089.510966] sd 0:0:0:0: [sda] CDB:
    [ 2089.510968] cdb[0]=0x2a: 2a 00 1a 07 b2 c7 00 00 d8 00
    [ 2089.510980] end_request: I/O error, dev sda, sector 436712135
    [ 2089.511030] sd 0:0:0:0: [sda]
    [ 2089.511033] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511037] sd 0:0:0:0: [sda]
    [ 2089.511039] Sense Key : 0xb [current] [descriptor]
    [ 2089.511043] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511046] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511061] 1a 07 b2 c7
    [ 2089.511069] sd 0:0:0:0: [sda]
    [ 2089.511071] ASC=0x0 ASCQ=0x0
    [ 2089.511076] sd 0:0:0:0: [sda] CDB:
    [ 2089.511078] cdb[0]=0x2a: 2a 00 1a 07 ae 8f 00 00 08 00
    [ 2089.511090] end_request: I/O error, dev sda, sector 436711055
    [ 2089.511111] sd 0:0:0:0: [sda]
    [ 2089.511114] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511118] sd 0:0:0:0: [sda]
    [ 2089.511120] Sense Key : 0xb [current] [descriptor]
    [ 2089.511125] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511128] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511144] 1a 07 b2 c7
    [ 2089.511151] sd 0:0:0:0: [sda]
    [ 2089.511154] ASC=0x0 ASCQ=0x0
    [ 2089.511158] sd 0:0:0:0: [sda] CDB:
    [ 2089.511160] cdb[0]=0x2a: 2a 00 1a 07 ae 9f 00 00 08 00
    [ 2089.511173] end_request: I/O error, dev sda, sector 436711071
    [ 2089.511188] sd 0:0:0:0: [sda]
    [ 2089.511191] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511195] sd 0:0:0:0: [sda]
    [ 2089.511197] Sense Key : 0xb [current] [descriptor]
    [ 2089.511201] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511204] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511219] 1a 07 b2 c7
    [ 2089.511227] sd 0:0:0:0: [sda]
    [ 2089.511230] ASC=0x0 ASCQ=0x0
    [ 2089.511234] sd 0:0:0:0: [sda] CDB:
    [ 2089.511236] cdb[0]=0x2a: 2a 00 1a 07 ae a7 00 00 08 00
    [ 2089.511249] end_request: I/O error, dev sda, sector 436711079
    [ 2089.511263] sd 0:0:0:0: [sda]
    [ 2089.511266] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511270] sd 0:0:0:0: [sda]
    [ 2089.511272] Sense Key : 0xb [current] [descriptor]
    [ 2089.511277] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511279] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511295] 1a 07 b2 c7
    [ 2089.511302] sd 0:0:0:0: [sda]
    [ 2089.511305] ASC=0x0 ASCQ=0x0
    [ 2089.511309] sd 0:0:0:0: [sda] CDB:
    [ 2089.511311] cdb[0]=0x2a: 2a 00 1a 07 ae af 00 00 08 00
    [ 2089.511324] end_request: I/O error, dev sda, sector 436711087
    [ 2089.511343] ata1: EH complete
    [ 2089.511517] REISERFS abort (device dm-3): Journal write error in flush_commit_list
    error.log (only part related to the current session):
    Sep 28 20:20:21 localhost kernel: [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    Sep 28 20:20:21 localhost kernel: [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    Sep 28 20:20:21 localh

    uzsolt wrote:
    I've same problem with an asus laptop, with one hdd. On the device I've some partitions (home, root, backup, var) but this error appears with 'home' only. Sometimes the mount options turns into "read-only", but only on home-partition (ext4, but root, var and a download-directory is ext4 too but they works well).
    I found this: https://bbs.archlinux.org/viewtopic.php … 9#p1052099 - I hope this helps for me - and for you too
    Errors in logs:
    Dec 02 09:44:03 [kernel] [ 666.911555] ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x400800 action 0x6 frozen
    Dec 02 09:44:03 [kernel] [ 666.911561] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:03 [kernel] [ 666.911564] ata1: SError: { HostInt Handshk }
    Dec 02 09:44:03 [kernel] [ 666.911568] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:03 [kernel] [ 666.911574] ata1.00: cmd 61/68:10:53:25:2a/00:00:04:00:00/40 tag 2 ncq 53248 out
    Dec 02 09:44:03 [kernel] [ 666.911574] res 40/00:10:53:25:2a/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:03 [kernel] [ 666.911577] ata1.00: status: { DRDY }
    Dec 02 09:44:03 [kernel] [ 666.911583] ata1: hard resetting link
    Dec 02 09:44:03 [kernel] [ 667.396660] ata1: softreset failed (device not ready)
    Dec 02 09:44:03 [kernel] [ 667.396668] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:03 [kernel] [ 667.563375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:03 [kernel] [ 667.614772] ata1.00: configured for UDMA/133
    Dec 02 09:44:03 [kernel] [ 667.614796] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614798] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:03 [kernel] [ 667.614801] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614802] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:03 [kernel] [ 667.614806] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:03 [kernel] [ 667.614808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:03 [kernel] [ 667.614816] 04 2a 25 53
    Dec 02 09:44:03 [kernel] [ 667.614821] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614822] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:03 [kernel] [ 667.614825] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:03 [kernel] [ 667.614827] cdb[0]=0x2a: 2a 00 04 2a 25 53 00 00 68 00
    Dec 02 09:44:03 [kernel] [ 667.614834] end_request: I/O error, dev sda, sector 69870931
    Dec 02 09:44:03 [kernel] [ 667.614862] ata1: EH complete
    Dec 02 09:44:03 [kernel] [ 667.614949] Aborting journal on device sda3-8.
    Dec 02 09:44:03 [kernel] [ 667.614962] EXT4-fs error (device sda3) in ext4_reserve_inode_write:4550: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.692734] EXT4-fs error (device sda3) in ext4_dirty_inode:4669: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.720681] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:04 [kernel] [ 667.720690] EXT4-fs (sda3): Remounting filesystem read-only
    Dec 02 09:44:04 [kernel] [ 667.721798] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:30 [kernel] [ 694.098612] ata1.00: exception Emask 0x50 SAct 0x40 SErr 0x800 action 0x6 frozen
    Dec 02 09:44:30 [kernel] [ 694.098622] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:30 [kernel] [ 694.098627] ata1: SError: { HostInt }
    Dec 02 09:44:30 [kernel] [ 694.098635] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:30 [kernel] [ 694.098647] ata1.00: cmd 61/08:30:53:a6:e5/00:00:05:00:00/40 tag 6 ncq 4096 out
    Dec 02 09:44:30 [kernel] [ 694.098647] res 40/00:30:53:a6:e5/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:30 [kernel] [ 694.098653] ata1.00: status: { DRDY }
    Dec 02 09:44:30 [kernel] [ 694.098663] ata1: hard resetting link
    Dec 02 09:44:30 [kernel] [ 694.583317] ata1: softreset failed (device not ready)
    Dec 02 09:44:30 [kernel] [ 694.583328] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:31 [kernel] [ 694.749997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:31 [kernel] [ 694.804387] ata1.00: configured for UDMA/133
    Dec 02 09:44:31 [kernel] [ 694.804425] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804428] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:31 [kernel] [ 694.804434] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804437] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:31 [kernel] [ 694.804443] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:31 [kernel] [ 694.804447] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:31 [kernel] [ 694.804463] 05 e5 a6 53
    Dec 02 09:44:31 [kernel] [ 694.804472] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804475] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:31 [kernel] [ 694.804480] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:31 [kernel] [ 694.804482] cdb[0]=0x2a: 2a 00 05 e5 a6 53 00 00 08 00
    Dec 02 09:44:31 [kernel] [ 694.804497] end_request: I/O error, dev sda, sector 98936403
    Dec 02 09:44:31 [kernel] [ 694.804505] Buffer I/O error on device sda3, logical block 9437196
    Dec 02 09:44:31 [kernel] [ 694.804508] lost page write due to I/O error on sda3
    Dec 02 09:44:31 [kernel] [ 694.804537] ata1: EH complete
    The other partition works well on same disk as I wrote above.
    Is /home on /dev/sda3?

Maybe you are looking for

  • Java Aplication and MSaccess

    Hi.. I want to write a simple aplication in Java, and bc it will run localy and It will be easy to send az a jar file to other plp, iI think it is best to use a MS access databasefile and have this inside the jar file, Question 1. is it possible to d

  • Can any tell me the limitations and bugs in Taleo learn

    Hi All, I know Taleo Recruiting but new in Taleo learn wanted to know the limitations and bugs which are currently available in Taleo Learn. Being you expert who have implemented Taleo learn, It will be greatly appreciated if you can share some of th

  • I recently did an apps update and now the update is locked and I have 15 apps I can't open. Any suggestions on how to fix this?

    I recently did an apps update and now the update is locked and I have 15 apps I can't open.  Any ideas on what may have caused this and to fix it?

  • BO BI Suite 4.0 Patches

    Hi, There are now 10 patches out. Are they comulative? Do I need to install only patch 10? Thank you

  • AD Site and Service

    HI All,   Ok, here is our situation.  We have 5 locations with domain controllers. All Sites are connected via MPLS. ( I have cut the real names)  Ligo is the Main Site with PDC  and create the site link to this from each site locations. But i kept t