Symbol as part of an e-mail address...

hello.
I use Mac Mail.
Every time I try to type in a friend's e-mail address in a new mail message, a symbol pops up in the address field as part of the actual address.
I delete that part of it, but as soon as I hit the "enter" button (so that the cursor dissappears), the symbol pops up again.
And when I try to send, it says that it's an invalid address.
I can't get rid of this thing.
The symbol used to be in the address book under this person's name.
It was in the last name field.
But I deleted it a while ago.
Now he is just listed as a first name. No last.
As soon as I type the first few letters of this friends' name, the mac automatically enters this symbol in the address field, at the end of the actual real address.
can someone help?
Thanks.

From Mail's Help menu:
To manage addresses in your Previous Recipients list:
Choose Window > Previous Recipients.
Do one of the following:
1. To sort the list by name, email address, or the date the address was last used, click a heading.
2. To search for a name in the list, enter the name in the search field .
3. To remove a selected recipient from the list, click Remove From List. Removing the recipient is useful if you don't intend to use it again or if you previously mistyped an address and want Mail to stop suggesting it as a matching address.
4. To add a selected recipient to your address book, click "Add to Address Book." (Addresses that are already in your address book have a card icon next to them.)

Similar Messages

  • I want to stop the extra part of an E-Mail Address from appearing at beginning during manual type entry

    A couple of upgrades ago I noticed when I started typing an E-Mail Address manually, just as before, it starts coming up with suggestions. NOW, when I select, it adds the search typing in front of the Name and E-Mail Address. Before the Name and E-Mail Address replaced the search typing. Is still does the replace IF there is MORE than one possible displayed and I click on the desired.
    If I type tru I get what I want BUT it enters "tru >> Fire Company Trustees <[email protected]>" into the address line. I put the quotes to show what is actually included, which is the letters tru AND the >>. I now have to remember to go back and "clean up", getting rid of the "tru >>" so it says Fire Company Trustees <[email protected]>
    Very annoying!

    Are you using 34.4? if not please update and see if you still have the issue. As I understand it 34.4 Fixes this.

  • Why is my Kuler name part of my e-mail address?

    I'm new to Kuler just today and, while I love it, it's the only place on the entire internet that seems to publicly display the first half of my email address as my screen name. I've got a separate and different screen name to my email address, but this doesn't show once I login. It works in the Acrobat site, but not on Kuler. Please help! Thanks...

    This is a long standing problem:  Unlike all other Adobe Websites, Kuler does not pull the user's Adobe ID screen name, but uses the the email address (up to the @).   If your email address uses your real name that is displayed, violating your privacy and Adobe's Privacy Policy.   All my Kuler palettes publically display "by [Real Name]", not "by TG_SF," my Adobe ID screen name.   Logging out, deleting cookies and logging in do NOT help.  For years, the Kuler forums are full of pleas to Adobe to fix this privacy bug, but they don't.  Someone, please wake them up!  Thank you.

  • Wrong recognition of mail addresses - automatic replacement

    Hello
    I am using frequently the automatic regognition of URLs and Emails in Pages. Normaly it works fine, but if I type (or paste) an email address that ends with web.de, then only the domain part is recognized as an URL but not the complete address as an email address. Example: [email protected] works fine. But for [email protected] Pages only substitutes web.de as a hyperlink!
    Any suggestions?
    Thanks a lot and
    regards
    Martin
    G5, Powerbook, iBook   Mac OS X (10.4.2)  
    G5, Powerbook, iBook   Mac OS X (10.4.2)  

    Hallo Martin,
    yes, I can reproduce your problem.
    The web.de part of the e-mail address becomes a hyperlink to a web page instead of hyperlink to an e-mail address.
    Go to Hyperlink inspector on Hyperlink tab to check this behavior.
    You can change the target from "Web-Seite" to "E-Mail-Nachricht" and manually correct the "An:" and "Anzeigen:" fields.
    If you enter your e-mail addresses with a "wrong" extension (e.g. [email protected]) then the complete expression is marked as hyperlink to an e-mail address but you still have to correct the e-mail address in Hyperlink inspector. Try which way suits you better.
    Anyway, it seems to be a bug in the automatic recognition of e-mail addresses. You should file a bug report at Apple's feedback page.
    If this information is useful to you, please mark it as "helpful" or "solved" using the little buttons in the titlebar of this message. Thank you.

  • Need to add an e-mail address to an e-mail symbol/link

    Hi, I have an envelope symbol in my .fla file and I need to assign it an e-mail address. I can find the symbol in the library but am not sure where to add/insert the actual e-mail address. The .fla is a template if that is relevant - Thanks, Chris (I am using Flash CS4 and MS Web Expression is my design app.)

    If you cannot find that symbol at all in the file when you run it, then place one on the stage and add some code for it. Since your file is using AS 2.0, click on the email symbol and assign it an instance name in the properties panel, let's say you name it "emailLink".
    Then, in the same frame on another layer add the following actionscript...
    emailLink.onRelease = function(){
         getURL("[email protected]");
    When you run the file online it will open an email window with the address already entered.  If you test it while in the authoring mode, you are likely to have a browser window also appear, but this only happens when testing from your pc.

  • What causes a star symbol to appear just to the left of one of the e-mail addresses in the TO field?

    What causes a star symbol to appear just to the left of one of the e-mail addresses in the TO field?

    You, or someone else, set those users as VIP's in the mail settings.
    http://email.about.com/od/iphonemailtips/qt/How-To-Add-Or-Remove-Vip-Senders-In- Ios-Mail.htm
    iCloud: Make a sender a VIP

  • Contacts photos garbled, e-mail addresses missing (at) symbol

    Photos next to contacts are garbled. They look fine on our iPod Classic 80GB.
    E-mail address (at) symbols are missing, so the username and domain of the address run together.

    Hi there, thx for reply!
    I deleted the account now, and readded it. Will see if it works now, next time she is online, and then report here.
    As for the differences in the accounts:
    I don't think there is one. All of my contacts use ICQ so far. It could be that they are running different versions though..
    The funny thing as i allready mentioned is, that i can see the online status in adressbook, but not in Mail.

  • HT4623 My Apple 4s phone is frozen up and I can't do anything on it.  I was updating my IOS to IOS7 as prompted to on the screen when I reached the part where it asked for an backup E-mail address.  I supplied this and it froze up and won't even turn off

    I received a prompt on the screen of my Iphone 4S to update my IOS to IOS7.  I clicked on "Start" and went thru and supplied all the requested info.  It asked me for an alternate back-up  E-mail address, I entered this on the screen and when I clicked on "Next" it would go no further on this setup. Now I can't do anything because it's like it totally froze up.  I can't even turn my phone off nor go forward or anything.  What can I do to turn my phone off and totally stop this update???

    Hi Genoc728,
    Thanks for visiting Apple Support Communities.
    If your iPhone is unresponsive and can't be turned off, you can reset it. See this article for the steps, and other helpful troubleshooting tips for an unresponsive device:
    http://www.apple.com/support/iphone/assistant/phone/#section_1
    Regards,
    Jeremy

  • Avoid "mailto:"-part when copying an e-mail address from a message?

    I do a lot of copying e-mail addresses from within an e-mail message, during my day. It's annoying that "mailto:" is automatically added to the e-mail address when placed in the clipboard, as if you just paste it into a new e-mail, as "mailto:[email protected]", then Apple Mail will complain about the e-mail message.
    I just right click on an e-mail address within a message and select the "copy" option (I don't know what it is in english, "copy link", perhaps?).

    If you are talking about an address in a received mail the easy way to do it is to click the star to the right of the senders email as it displays in the Message Pane or Tab header.
    If the sender is not in one of your address books the star is not filled with color. Clicking the empty star will add it to the default Personal Address Book and fill the star with color.
    Clicking a filled star will open the contact edit dialog box and there is a drop down list of address books so you can move it.
    This is NOT the same star that shows to the left of a message header in the Inbox window.
    You can also drag and drop contacts between address books easily.

  • Why does FireFox truncate part of an E-mail of more than one page when I try to print it out? How can I sent an E-mail blaet to several but only show one name o

    When I try to print out an E-mail that is longer than one page, part of the 2nd page is truncated. I then have to go to Safari to print out the entire E-mail without part of it being truncated.
    When I have multiple E-mail addresses on a single E-mail, how can I send the E-mail so that each recipient only sees his/her name and E-mail address rather than everyone else that the E-mail is addressed to?
    Please advise.
    Thank you.
    Bill Leete

    Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
    To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

  • How to set up a new apple e-mail address when already have an existing Apple ID

    Hello
    Thank you for taking a look at my query - I have searched many posts but not found a specific answer to my question - so please help!
    My dilemma:
    I am in effect running everything smoothly - I am already on iCloud and have an @me.com mail address.
    The problem arises in that I need to change my name (due to a divorce) and hence my e-mail address -  I would like to use my maiden name for obvious reasons!
    So what have I tried?:
    I have set up a new Apple ID using a 'hotmail' address, as you need an existing address to set an ID, but would actually like a new 'apple' address. How do I do this? Since I have registered all my devices (iMac, iPad 3 and iPhone 3GS) with iCloud already using my married name ID it seems I am unable to get another appleID? Is this true? Is there a way around this?
    Concerns:
    I have many communications with lawyers and ex and various other things I would like to keep on my existing apple ID/mail account (and also itunes etc) I still need to be able to access this information. I am happy to keep this  apple ID active at the same time as having the new ID if this is possible on all the same devices? Currently however I do not know how to do this, i.e. run two mail accounts through iCloud OR ideally transfer my info to the new ID - however from reading around I believe this latter (logical) option may be impossible?
    So:
    ... I need a knight (or maiden) in  shining armour to help me understand my options, answer the Q's above and provide the steps I have to follow to do this as I am no IT guru! And as there are many similar Qs without a clear answer I'm sure you will gain lots of points!
    Thanking you kindly in advance!
    PS. Apple if you are reading this please can you do something about this situation as there seem to be many questions around this issue. Unfortunately divorce and name changes are a frequent part of life these days and it would be good if you can accommodate this!

    OK, so I realised I was still within my 90days of being able to get support from Apple due to recent iPad3 purchase.
    So between what I have gleaned from this forum and what I have learnt from the support call here I hope is a comprehensive one stop shop  answer to the question... "How do I get another Apple e-mail address ?" It's not straight forward but bear with me as you will get a result (also if anyone with IT prowess can offer further advice or clarification please do reply to this so we keep all info in the same place)... right -  we shall begin:
    First a few points to bear in mind/wise words that I wish I was aware of before:
    You preferably do not want more than one Apple ID so that syncing etc is straight forward. SO create an e-mail address that you will be happy to have no matter what, whether you are married/divorced (and yes it unfortunately could happen...) etc...
    So...
    1. First go to www.myinfo.apple.com, change your country as required and click on manage your account. Log-in. Should go straight to your Name, ID and e-mail tab.
    2. OK you are now presented with one of two scenarios....
    a) If your AppleID and primary e-mail address  is a me.com (or mac.com) then you are unlikely to have an edit option next to this line - follow point 3. Another ID has to be generated, and unfortunately (as Winston Churchill above rightly pointed out, the problem that you will have on the whole is that any purchases you make from the iTunes Store under your previous account, will be inaccessible on many of your devices. - IF however all you wanted is a new e-mail address and you are happy to keep running your old ID at the same time - there is a way around this .... read on to point 3)
    b) If your AppleID and primary e-mail address is not a me.com (or mac.com) then - follow point 4. This is the better option to have, hop skip and jump with glee as you will in effect have the same ID account and syncing will not be an issue. But note that your new ID will not be editable going forward so head my words of wisdom above.
    NB. If you already have more than one ID and one of the 'Apple ID and primary e-mail' is editable i.e. 2b) then choose this option to change as it is simpiler to manage.
    3. OK lots of steps here and explanations:
    i) You need to create another Apple ID - there are two ways of doing this a) if you go to your iphone or ipad settings > iCloud > delete your account (Don't worry you are effectively only signing out and not deleting) (you'll be given an option what to do with your contacts) > The page will then give you an option to create a new Apple ID.... follow the steps, and you will get a new me.com  AppleID and primary e-mail address.
    b) If you do not have an iphone or ipad - use your computer: Go to sytem preferences > icloud > sign out of account (again you will be given an option to keep contacts on the computer etc. do what is appropriate for you). An iCloud window  should then pop up - and there is an option to 'Create an Apple ID'... follow the steps, in 2nd step (after date of birth input)  go for the free iCloud  option and do not use an existing e-mail address (e.g. hotmail or gmail)... as it then gets more complicated (I did go down this route as I didn't know any better - so I can explain if you wish to know - just ask) - continue with the steps and you will get a new me.com AppleID and primary e-mail address.
    ii) Now assuming you have an itunes account and other devices... and you will want to sync everything across devices... then ensure you log back into your OLD account and use this as your main  account on all devices. This will keep all things synced between devices with no problems.
    iii) To get your new e-mail account active go to all your devices and computer and just add the new me.com address as another account:
    a) on iphone and ipad: settings > mail, contacts, calendars > "add account"
    b) on computer assuming you use mail: Mail>preferences>account information> hit the '+' under the left hand account box and fill in the details... You will then effectively have two mail boxes running in mail - your previous and new one. What I have noticed is that you can drag and drop (which will copy) mailboxes you created in your old account into your new account - which is great as you can keep the stored messages to hand and effectively you can taper down use of the old account (or use as you wish) over time and eventually not notice the old account is in the background.
    Hey presto you have a new e-mail address AND your devices are syncing itunes, photostream etc...
    4) So - much better option....
    i) create a new Apple ID as per point 3i) above.
    ii) go back to www.myinfo.apple.com, change your country as required and click on manage your account. Log-in with old ID. Under Apple ID and primary e-mail adress - click edit and now insert your new me.com Apple ID. This will now be both your ID and primary e-mail address. This is where my knowledge (gleaned from this Forum) stops on this option - as unfortunately it did not apply to me. But I think it will get you where you want!
    Hope all this info helps rather than hinders!! It definitely would have helped me
    Enjoy.

  • Please Help! Suddenly unable to open Mail, Address Book etc

    This morning when I woke up my IBook my Mail was still open from yesterday. When I tried to open ICal it kept crashing. So I restarted and then suddenly ITunes, Mail, Address Book and ICal would not open at all!! (However, it seems that iPhoto, Appleworks, Safari etc is fine).
    I do have a IPhone, but haven't synced in a week or so. Not sure that that would be relevant at all.
    The other weird thing that has happened, is that all the info on the top right hand corner of my menu bar (my airport, date, weather snitch, spotlight etc) disappeared a few weeks ago. It has been blank there ever since. When I just did a check of those applications ( internet connect, weather snitch) they also didn't open now.
    Thanks in advance for any advice at all...
    BTW, I just ran verify disk, and it stopped with this error message:
    " the underlying task reported failure on exit" - The volume needs to be repaired.
    Really hoping that someone can help me with this!
    Message was edited by: ALSVLA

    Hi ALSVLA, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!

  • [SOLVED]Issue with Postfix sending to external mail addresses

    I'm having a very silly issue with Postfix. I followed the wiki article at [link]https://wiki.archlinux.org/index.php/Postfix[/link], and everything seems to work properly, however I cannot send to emails outside of my domain.
    I get the error:
    550 5.1.1 <[email protected]>: Recipient address rejected: Local delivery only!
    Here is what the logs say:
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: connect from localhost.localdomain[127.0.0.1]
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: 091E011E3C: client=localhost.localdomain[127.0.0.1]
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: 091E011E3C: reject: RCPT from localhost.localdomain[127.0.0.1]: 550 5.1.1 <[email protected]>: Recipient address rejected: Local delivery only!; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<sendingdomain.com>
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: lost connection after RCPT from localhost.localdomain[127.0.0.1]
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: disconnect from localhost.localdomain[127.0.0.1]
    May 08 16:05:14 my.dns.stuff.org sudo[31476]: me : TTY=pts/0 ; PWD=/etc/postfix ; USER=root ; COMMAND=/usr/bin/journalctl
    main.cf
    # Global Postfix configuration file. This file lists only a subset
    # of all parameters. For the syntax, and for a complete parameter
    # list, see the postconf(5) manual page (command: "man 5 postconf").
    # For common configuration examples, see BASIC_CONFIGURATION_README
    # and STANDARD_CONFIGURATION_README. To find these documents, use
    # the command "postconf html_directory readme_directory", or go to
    # http://www.postfix.org/BASIC_CONFIGURATION_README.html etc.
    # For best results, change no more than 2-3 parameters at a time,
    # and test if Postfix still works after every change.
    # SOFT BOUNCE
    # The soft_bounce parameter provides a limited safety net for
    # testing. When soft_bounce is enabled, mail will remain queued that
    # would otherwise bounce. This parameter disables locally-generated
    # bounces, and prevents the SMTP server from rejecting mail permanently
    # (by changing 5xx replies into 4xx replies). However, soft_bounce
    # is no cure for address rewriting mistakes or mail routing mistakes.
    #soft_bounce = no
    # LOCAL PATHNAME INFORMATION
    # The queue_directory specifies the location of the Postfix queue.
    # This is also the root directory of Postfix daemons that run chrooted.
    # See the files in examples/chroot-setup for setting up Postfix chroot
    # environments on different UNIX systems.
    queue_directory = /var/spool/postfix
    # The command_directory parameter specifies the location of all
    # postXXX commands.
    command_directory = /usr/bin
    # The daemon_directory parameter specifies the location of all Postfix
    # daemon programs (i.e. programs listed in the master.cf file). This
    # directory must be owned by root.
    daemon_directory = /usr/lib/postfix
    # The data_directory parameter specifies the location of Postfix-writable
    # data files (caches, random numbers). This directory must be owned
    # by the mail_owner account (see below).
    data_directory = /var/lib/postfix
    # QUEUE AND PROCESS OWNERSHIP
    # The mail_owner parameter specifies the owner of the Postfix queue
    # and of most Postfix daemon processes. Specify the name of a user
    # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
    # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
    # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
    # USER.
    mail_owner = postfix
    # The default_privs parameter specifies the default rights used by
    # the local delivery agent for delivery to external file or command.
    # These rights are used in the absence of a recipient user context.
    # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
    #default_privs = nobody
    # INTERNET HOST AND DOMAIN NAMES
    # The myhostname parameter specifies the internet hostname of this
    # mail system. The default is to use the fully-qualified domain name
    # from gethostname(). $myhostname is used as a default value for many
    # other configuration parameters.
    #myhostname = host.domain.tld
    myhostname = mail.sendingdomain.com
    # The mydomain parameter specifies the local internet domain name.
    # The default is to use $myhostname minus the first component.
    # $mydomain is used as a default value for many other configuration
    # parameters.
    mydomain = www.sendingdomain.com
    # SENDING MAIL
    # The myorigin parameter specifies the domain that locally-posted
    # mail appears to come from. The default is to append $myhostname,
    # which is fine for small sites. If you run a domain with multiple
    # machines, you should (1) change this to $mydomain and (2) set up
    # a domain-wide alias database that aliases each user to
    # [email protected].
    # For the sake of consistency between sender and recipient addresses,
    # myorigin also specifies the default domain name that is appended
    # to recipient addresses that have no @domain part.
    #myorigin = $myhostname
    myorigin = $mydomain
    append_dot_mydomain = no
    # RECEIVING MAIL
    # The inet_interfaces parameter specifies the network interface
    # addresses that this mail system receives mail on. By default,
    # the software claims all active interfaces on the machine. The
    # parameter also controls delivery of mail to user@[ip.address].
    # See also the proxy_interfaces parameter, for network addresses that
    # are forwarded to us via a proxy or network address translator.
    # Note: you need to stop/start Postfix when this parameter changes.
    inet_interfaces = all
    #inet_interfaces = loopback-only
    #inet_interfaces = $myhostname
    #inet_interfaces = $myhostname, localhost
    # The proxy_interfaces parameter specifies the network interface
    # addresses that this mail system receives mail on by way of a
    # proxy or network address translation unit. This setting extends
    # the address list specified with the inet_interfaces parameter.
    # You must specify your proxy/NAT addresses when your system is a
    # backup MX host for other domains, otherwise mail delivery loops
    # will happen when the primary MX host is down.
    #proxy_interfaces =
    #proxy_interfaces = 1.2.3.4
    # The mydestination parameter specifies the list of domains that this
    # machine considers itself the final destination for.
    # These domains are routed to the delivery agent specified with the
    # local_transport parameter setting. By default, that is the UNIX
    # compatible delivery agent that lookups all recipients in /etc/passwd
    # and /etc/aliases or their equivalent.
    # The default is $myhostname + localhost.$mydomain. On a mail domain
    # gateway, you should also include $mydomain.
    # Do not specify the names of virtual domains - those domains are
    # specified elsewhere (see VIRTUAL_README).
    # Do not specify the names of domains that this machine is backup MX
    # host for. Specify those names via the relay_domains settings for
    # the SMTP server, or use permit_mx_backup if you are lazy (see
    # STANDARD_CONFIGURATION_README).
    # The local machine is always the final destination for mail addressed
    # to user@[the.net.work.address] of an interface that the mail system
    # receives mail on (see the inet_interfaces parameter).
    # Specify a list of host or domain names, /file/name or type:table
    # patterns, separated by commas and/or whitespace. A /file/name
    # pattern is replaced by its contents; a type:table is matched when
    # a name matches a lookup key (the right-hand side is ignored).
    # Continue long lines by starting the next line with whitespace.
    # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
    #mydestination = $myhostname, localhost.$mydomain, localhost
    #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
    mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
    #mydestination = localhost
    # mail.$mydomain, www.$mydomain, ftp.$mydomain
    # REJECTING MAIL FOR UNKNOWN LOCAL USERS
    # The local_recipient_maps parameter specifies optional lookup tables
    # with all names or addresses of users that are local with respect
    # to $mydestination, $inet_interfaces or $proxy_interfaces.
    # If this parameter is defined, then the SMTP server will reject
    # mail for unknown local users. This parameter is defined by default.
    # To turn off local recipient checking in the SMTP server, specify
    # local_recipient_maps = (i.e. empty).
    # The default setting assumes that you use the default Postfix local
    # delivery agent for local delivery. You need to update the
    # local_recipient_maps setting if:
    # - You define $mydestination domain recipients in files other than
    # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
    # For example, you define $mydestination domain recipients in
    # the $virtual_mailbox_maps files.
    # - You redefine the local delivery agent in master.cf.
    # - You redefine the "local_transport" setting in main.cf.
    # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
    # feature of the Postfix local delivery agent (see local(8)).
    # Details are described in the LOCAL_RECIPIENT_README file.
    # Beware: if the Postfix SMTP server runs chrooted, you probably have
    # to access the passwd file via the proxymap service, in order to
    # overcome chroot restrictions. The alternative, having a copy of
    # the system passwd file in the chroot jail is just not practical.
    # The right-hand side of the lookup tables is conveniently ignored.
    # In the left-hand side, specify a bare username, an @domain.tld
    # wild-card, or specify a [email protected] address.
    #local_recipient_maps = unix:passwd.byname $alias_maps
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    #local_recipient_maps =
    # The unknown_local_recipient_reject_code specifies the SMTP server
    # response code when a recipient domain matches $mydestination or
    # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
    # and the recipient address or address local-part is not found.
    # The default setting is 550 (reject mail) but it is safer to start
    # with 450 (try again later) until you are certain that your
    # local_recipient_maps settings are OK.
    unknown_local_recipient_reject_code = 550
    # TRUST AND RELAY CONTROL
    # The mynetworks parameter specifies the list of "trusted" SMTP
    # clients that have more privileges than "strangers".
    # In particular, "trusted" SMTP clients are allowed to relay mail
    # through Postfix. See the smtpd_recipient_restrictions parameter
    # in postconf(5).
    # You can specify the list of "trusted" network addresses by hand
    # or you can let Postfix do it for you (which is the default).
    # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
    # clients in the same IP subnetworks as the local machine.
    # On Linux, this does works correctly only with interfaces specified
    # with the "ifconfig" command.
    # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
    # clients in the same IP class A/B/C networks as the local machine.
    # Don't do this with a dialup site - it would cause Postfix to "trust"
    # your entire provider's network. Instead, specify an explicit
    # mynetworks list by hand, as described below.
    # Specify "mynetworks_style = host" when Postfix should "trust"
    # only the local machine.
    #mynetworks_style = class
    #mynetworks_style = subnet
    mynetworks_style = host
    # Alternatively, you can specify the mynetworks list by hand, in
    # which case Postfix ignores the mynetworks_style setting.
    # Specify an explicit list of network/netmask patterns, where the
    # mask specifies the number of bits in the network part of a host
    # address.
    # You can also specify the absolute pathname of a pattern file instead
    # of listing the patterns here. Specify type:table for table-based lookups
    # (the value on the table right-hand side is not used).
    #mynetworks = 168.100.189.0/28, 127.0.0.0/8
    #mynetworks = $config_directory/mynetworks
    #mynetworks = hash:/etc/postfix/network_table
    # The relay_domains parameter restricts what destinations this system will
    # relay mail to. See the smtpd_recipient_restrictions description in
    # postconf(5) for detailed information.
    # By default, Postfix relays mail
    # - from "trusted" clients (IP address matches $mynetworks) to any destination,
    # - from "untrusted" clients to destinations that match $relay_domains or
    # subdomains thereof, except addresses with sender-specified routing.
    # The default relay_domains value is $mydestination.
    # In addition to the above, the Postfix SMTP server by default accepts mail
    # that Postfix is final destination for:
    # - destinations that match $inet_interfaces or $proxy_interfaces,
    # - destinations that match $mydestination
    # - destinations that match $virtual_alias_domains,
    # - destinations that match $virtual_mailbox_domains.
    # These destinations do not need to be listed in $relay_domains.
    # Specify a list of hosts or domains, /file/name patterns or type:name
    # lookup tables, separated by commas and/or whitespace. Continue
    # long lines by starting the next line with whitespace. A file name
    # is replaced by its contents; a type:name table is matched when a
    # (parent) domain appears as lookup key.
    # NOTE: Postfix will not automatically forward mail for domains that
    # list this system as their primary or backup MX host. See the
    # permit_mx_backup restriction description in postconf(5).
    relay_domains = $mydestination
    # INTERNET OR INTRANET
    # The relayhost parameter specifies the default host to send mail to
    # when no entry is matched in the optional transport(5) table. When
    # no relayhost is given, mail is routed directly to the destination.
    # On an intranet, specify the organizational domain name. If your
    # internal DNS uses no MX records, specify the name of the intranet
    # gateway host instead.
    # In the case of SMTP, specify a domain, host, host:port, [host]:port,
    # [address] or [address]:port; the form [host] turns off MX lookups.
    # If you're connected via UUCP, see also the default_transport parameter.
    #relayhost = $mydomain
    #relayhost = [gateway.my.domain]
    #relayhost = [mailserver.isp.tld]
    #relayhost = uucphost
    #relayhost = [an.ip.add.ress]
    default_transport = error: Local delivery only!
    # REJECTING UNKNOWN RELAY USERS
    # The relay_recipient_maps parameter specifies optional lookup tables
    # with all addresses in the domains that match $relay_domains.
    # If this parameter is defined, then the SMTP server will reject
    # mail for unknown relay users. This feature is off by default.
    # The right-hand side of the lookup tables is conveniently ignored.
    # In the left-hand side, specify an @domain.tld wild-card, or specify
    # a [email protected] address.
    #relay_recipient_maps = hash:/etc/postfix/relay_recipients
    # INPUT RATE CONTROL
    # The in_flow_delay configuration parameter implements mail input
    # flow control. This feature is turned on by default, although it
    # still needs further development (it's disabled on SCO UNIX due
    # to an SCO bug).
    # A Postfix process will pause for $in_flow_delay seconds before
    # accepting a new message, when the message arrival rate exceeds the
    # message delivery rate. With the default 100 SMTP server process
    # limit, this limits the mail inflow to 100 messages a second more
    # than the number of messages delivered per second.
    # Specify 0 to disable the feature. Valid delays are 0..10.
    #in_flow_delay = 1s
    # ADDRESS REWRITING
    # The ADDRESS_REWRITING_README document gives information about
    # address masquerading or other forms of address rewriting including
    # username->Firstname.Lastname mapping.
    # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
    # The VIRTUAL_README document gives information about the many forms
    # of domain hosting that Postfix supports.
    # "USER HAS MOVED" BOUNCE MESSAGES
    # See the discussion in the ADDRESS_REWRITING_README document.
    # TRANSPORT MAP
    # See the discussion in the ADDRESS_REWRITING_README document.
    # ALIAS DATABASE
    # The alias_maps parameter specifies the list of alias databases used
    # by the local delivery agent. The default list is system dependent.
    # On systems with NIS, the default is to search the local alias
    # database, then the NIS alias database. See aliases(5) for syntax
    # details.
    # If you change the alias database, run "postalias /etc/aliases" (or
    # wherever your system stores the mail alias file), or simply run
    # "newaliases" to build the necessary DBM or DB file.
    # It will take a minute or so before changes become visible. Use
    # "postfix reload" to eliminate the delay.
    #alias_maps = dbm:/etc/aliases
    #alias_maps = hash:/etc/aliases
    #alias_maps = hash:/etc/aliases, nis:mail.aliases
    #alias_maps = netinfo:/aliases
    alias_maps = hash:/etc/postfix/aliases
    # The alias_database parameter specifies the alias database(s) that
    # are built with "newaliases" or "sendmail -bi". This is a separate
    # configuration parameter, because alias_maps (see above) may specify
    # tables that are not necessarily all under control by Postfix.
    #alias_database = dbm:/etc/aliases
    #alias_database = dbm:/etc/mail/aliases
    #alias_database = hash:/etc/aliases
    #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
    alias_database = $alias_maps
    # ADDRESS EXTENSIONS (e.g., user+foo)
    # The recipient_delimiter parameter specifies the separator between
    # user names and address extensions (user+foo). See canonical(5),
    # local(8), relocated(5) and virtual(5) for the effects this has on
    # aliases, canonical, virtual, relocated and .forward file lookups.
    # Basically, the software tries user+foo and .forward+foo before
    # trying user and .forward.
    #recipient_delimiter = +
    # DELIVERY TO MAILBOX
    # The home_mailbox parameter specifies the optional pathname of a
    # mailbox file relative to a user's home directory. The default
    # mailbox file is /var/spool/mail/user or /var/mail/user. Specify
    # "Maildir/" for qmail-style delivery (the / is required).
    #home_mailbox = Mailbox
    home_mailbox = Maildir/
    # The mail_spool_directory parameter specifies the directory where
    # UNIX-style mailboxes are kept. The default setting depends on the
    # system type.
    #mail_spool_directory = /var/mail
    #mail_spool_directory = /var/spool/mail
    # The mailbox_command parameter specifies the optional external
    # command to use instead of mailbox delivery. The command is run as
    # the recipient with proper HOME, SHELL and LOGNAME environment settings.
    # Exception: delivery for root is done as $default_user.
    # Other environment variables of interest: USER (recipient username),
    # EXTENSION (address extension), DOMAIN (domain part of address),
    # and LOCAL (the address localpart).
    # Unlike other Postfix configuration parameters, the mailbox_command
    # parameter is not subjected to $parameter substitutions. This is to
    # make it easier to specify shell syntax (see example below).
    # Avoid shell meta characters because they will force Postfix to run
    # an expensive shell process. Procmail alone is expensive enough.
    # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
    # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
    #mailbox_command = /some/where/procmail
    #mailbox_command = /some/where/procmail -a "$EXTENSION"
    # The mailbox_transport specifies the optional transport in master.cf
    # to use after processing aliases and .forward files. This parameter
    # has precedence over the mailbox_command, fallback_transport and
    # luser_relay parameters.
    # Specify a string of the form transport:nexthop, where transport is
    # the name of a mail delivery transport defined in master.cf. The
    # :nexthop part is optional. For more details see the sample transport
    # configuration file.
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must update the "local_recipient_maps" setting in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    # Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
    # listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
    #mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
    # Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
    # subsequent line in master.cf.
    #mailbox_transport = cyrus
    # The fallback_transport specifies the optional transport in master.cf
    # to use for recipients that are not found in the UNIX passwd database.
    # This parameter has precedence over the luser_relay parameter.
    # Specify a string of the form transport:nexthop, where transport is
    # the name of a mail delivery transport defined in master.cf. The
    # :nexthop part is optional. For more details see the sample transport
    # configuration file.
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must update the "local_recipient_maps" setting in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #fallback_transport = lmtp:unix:/file/name
    #fallback_transport = cyrus
    #fallback_transport =
    # The luser_relay parameter specifies an optional destination address
    # for unknown recipients. By default, mail for unknown@$mydestination,
    # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
    # as undeliverable.
    # The following expansions are done on luser_relay: $user (recipient
    # username), $shell (recipient shell), $home (recipient home directory),
    # $recipient (full recipient address), $extension (recipient address
    # extension), $domain (recipient domain), $local (entire recipient
    # localpart), $recipient_delimiter. Specify ${name?value} or
    # ${name:value} to expand value only when $name does (does not) exist.
    # luser_relay works only for the default Postfix local delivery agent.
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must specify "local_recipient_maps =" (i.e. empty) in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #luser_relay = [email protected]
    #luser_relay = [email protected]
    #luser_relay = admin+$local
    # JUNK MAIL CONTROLS
    # The controls listed here are only a very small subset. The file
    # SMTPD_ACCESS_README provides an overview.
    # The header_checks parameter specifies an optional table with patterns
    # that each logical message header is matched against, including
    # headers that span multiple physical lines.
    # By default, these patterns also apply to MIME headers and to the
    # headers of attached messages. With older Postfix versions, MIME and
    # attached message headers were treated as body text.
    # For details, see "man header_checks".
    #header_checks = regexp:/etc/postfix/header_checks
    # FAST ETRN SERVICE
    # Postfix maintains per-destination logfiles with information about
    # deferred mail, so that mail can be flushed quickly with the SMTP
    # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
    # See the ETRN_README document for a detailed description.
    # The fast_flush_domains parameter controls what destinations are
    # eligible for this service. By default, they are all domains that
    # this server is willing to relay mail to.
    #fast_flush_domains = $relay_domains
    # SHOW SOFTWARE VERSION OR NOT
    # The smtpd_banner parameter specifies the text that follows the 220
    # code in the SMTP server's greeting banner. Some people like to see
    # the mail version advertised. By default, Postfix shows no version.
    # You MUST specify $myhostname at the start of the text. That is an
    # RFC requirement. Postfix itself does not care.
    #smtpd_banner = $myhostname ESMTP $mail_name
    #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
    # PARALLEL DELIVERY TO THE SAME DESTINATION
    # How many parallel deliveries to the same user or domain? With local
    # delivery, it does not make sense to do massively parallel delivery
    # to the same user, because mailbox updates must happen sequentially,
    # and expensive pipelines in .forward files can cause disasters when
    # too many are run at the same time. With SMTP deliveries, 10
    # simultaneous connections to the same domain could be sufficient to
    # raise eyebrows.
    # Each message delivery transport has its XXX_destination_concurrency_limit
    # parameter. The default is $default_destination_concurrency_limit for
    # most delivery transports. For the local delivery agent the default is 2.
    #local_destination_concurrency_limit = 2
    #default_destination_concurrency_limit = 20
    # DEBUGGING CONTROL
    # The debug_peer_level parameter specifies the increment in verbose
    # logging level when an SMTP client or server host name or address
    # matches a pattern in the debug_peer_list parameter.
    debug_peer_level = 2
    # The debug_peer_list parameter specifies an optional list of domain
    # or network patterns, /file/name patterns or type:name tables. When
    # an SMTP client or server host name or address matches a pattern,
    # increase the verbose logging level by the amount specified in the
    # debug_peer_level parameter.
    #debug_peer_list = 127.0.0.1
    #debug_peer_list = some.domain
    # The debugger_command specifies the external command that is executed
    # when a Postfix daemon program is run with the -D option.
    # Use "command .. & sleep 5" so that the debugger can attach before
    # the process marches on. If you use an X-based debugger, be sure to
    # set up your XAUTHORITY environment variable before starting Postfix.
    debugger_command =
    PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
    ddd $daemon_directory/$process_name $process_id & sleep 5
    # If you can't use X, use this to capture the call stack when a
    # daemon crashes. The result is in a file in the configuration
    # directory, and is named after the process name and the process ID.
    # debugger_command =
    # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
    # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
    # >$config_directory/$process_name.$process_id.log & sleep 5
    # Another possibility is to run gdb under a detached screen session.
    # To attach to the screen sesssion, su root and run "screen -r
    # <id_string>" where <id_string> uniquely matches one of the detached
    # sessions (from "screen -list").
    # debugger_command =
    # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
    # -dmS $process_name gdb $daemon_directory/$process_name
    # $process_id & sleep 1
    # INSTALL-TIME CONFIGURATION INFORMATION
    # The following parameters are used when installing a new Postfix version.
    # sendmail_path: The full pathname of the Postfix sendmail command.
    # This is the Sendmail-compatible mail posting interface.
    sendmail_path = /usr/bin/sendmail
    # newaliases_path: The full pathname of the Postfix newaliases command.
    # This is the Sendmail-compatible command to build alias databases.
    newaliases_path = /usr/bin/newaliases
    # mailq_path: The full pathname of the Postfix mailq command. This
    # is the Sendmail-compatible mail queue listing command.
    mailq_path = /usr/bin/mailq
    # setgid_group: The group for mail submission and queue management
    # commands. This must be a group name with a numerical group ID that
    # is not shared with other accounts, not even with the Postfix account.
    setgid_group = postdrop
    # html_directory: The location of the Postfix HTML documentation.
    html_directory = no
    # manpage_directory: The location of the Postfix on-line manual pages.
    manpage_directory = /usr/share/man
    # sample_directory: The location of the Postfix sample configuration files.
    # This parameter is obsolete as of Postfix 2.1.
    sample_directory = /etc/postfix/sample
    # readme_directory: The location of the Postfix README files.
    readme_directory = /usr/share/doc/postfix
    inet_protocols = ipv4
    #virtual_mailbox_domains = sendingdomain.com
    virtual_alias_maps = hash:/etc/postfix/virtual_alias, mysql:/etc/postfix/mysql_virtual_forwards.cf
    virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_domains.cf
    virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailboxes.cf
    virtual_mailbox_base = /home/vmailer
    virtual_uid_maps = static:5003
    virtual_gid_maps = static:5003
    virtual_minimum_uid = 5003
    virtual_mailbox_limit = 51200000
    Any help would be appreciated. Thank you.
    Last edited by nadman10 (2014-05-14 14:36:10)

    Your main.cf seems redundant.
    For example:
    if you specify:
    virtual_alias_maps = hash:/etc/postfix/virtual_alias, mysql:/etc/postfix/mysql_virtual_forwards.cf
    you don't need this:
    alias_maps = hash:/etc/postfix/aliases
    and i think you have a lot of more options you don't need.
    This is my main.cf on my vps and everything works great (sending and receiving emails from/to most common mail server: gmail, hotmail etc etc)
    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    readme_directory = no
    # TLS parameters
    smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
    smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
    smtpd_use_tls=yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    message_size_limit = 4194304
    virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
    virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf
    virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf
    virtual_transport = dovecot
    dovecot_destination_recipient_limit = 1
    it is very simple (no dkim, no forced tls, no mailbox limits and so on) and it can be improved but it works..
    as I suggested you just try spending some hour wiping postfix installation and giving a look to this guide

  • How do I remove an obsolete e-mail address of a friend (not a whole account)

    People change their provider and get a new e-mail address. From some people I have 3 addresses but 2 are obsolete. I can't remember which ones. So I want to remove the old addresses, not a whole e-mail account.
    If I send a new e-mail to a friend and I have typed part of my friends name, I don't want to see obsolete addresses as options. I only want to see 1 correct address.
    If your answer is something like "Go to the Adress Book", please do tell me - exactly - where this Address Book is and how I will be able to edit and save it.
    I have Thunderbird 31.5.0.
    Thank you.
    Frans1.

    All suggestions come from your address books. You are going to have to find the old addresses and edit or remove then.
    You have two address books by default. The personal and the collected books. Check them both and any other books you may have created.
    There is a button to open the address book window.

  • I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

    So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

    Thanks for your reply via email/msg. He wrote:
    If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
    Xeon 4 core - E5.1620v2
    Xeon 6 core - E5.1650v2
    Xeon 8 core - E5.1680v2
    Xeon 12 core - E5.2697v2
    I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
    My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
    I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT?  I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
    SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro      was announced Last year, barely made the December mark, then pushed to January, then February and now April.
    Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
    PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

Maybe you are looking for

  • Restrict system from doing re-confirmation of all line items in SO

    Hello SDNs, When we change the quantity of one line item, system is going for re-confirmation of all line items. when there are multiple line items, it is having perfomance problem. Now we want to change this to go for re-confirmation of only the cha

  • Form Itself Can't Print

    The pdf is made with Adobe LiveCycle Designer ES 9.0. I'm not the one who made it but I do have Adobe LiveCycle Designer ES2 v9.0. We want to print the form itself as well as the form fields, but it's not allowing us. Lost cause? I don't know how to

  • Integrating Portal 3.0 sp3a with iAS 6.5

    I have the Portal Server installed on one machine and an application running on iAS 6.5 on a different machine. I have tried to invoke the application using a URLScraper channel. In my application, I have done: Session lPortalSession          = null;

  • Labview Binary Data

    I have written some C programs for signal processing. I need to adapt these programs to accept binary data acquired by a colleague using Labview. The colleague mentions that the data is a 2-D array with a time column and an amplitude column. Furtherm

  • AT&T Finally Shipping iPhone 4S 64GB Orders Placed on 10/07/2011

    Orders finally being shipped by AT&T that were placed on 10/07/2011, at least mine.