Symbol characters are not shown correctly in webbrowser

Hello,
I have migrated my Forms 6i-application to Forms 11G R2 (11.1.2.0).
Most problems I have solved. But now I see that Symbol-Characters in boilerplate-text in Formsbuilder are shown correct, but in the web they appear as "translated". In my case the Omega is turned to W.
In the registry.dat I placed Symbol to be carried to Symbol because I read java could use Symbol.
But I am wrong.
Do you know what I must do to get the boilerplatetext shown in the rigth way?
Thanks in advance.
best regards
Eveline Merches

See my comments in this post:
client_get_file_name do not go to specified folder

Similar Messages

Special characters are not shown in compare document report in Acrobat X

Hi All,
I have a pdf document which is having some special characters like üὄ. Now I have updated the document with few corrections and while compare document in Acrobat X special characters are not shown in the report.
Can any one please look into this and give suggestion.

Hi Steve,
Thanks for your reply.
Platform - PC
Application - 3B2 and Acrobat 9
So far we have seen this kind of issue in only one document. In the below screenshot you can see 2 pdf files, the right side one is my MS pdf and the left side one is the exported pdf from 3B2 application both the files having the special characters such as . I just did the text comparison however both and is missing in the exported pdf but the reports shown the changes for characters only wherever the charactes is missing the report not shown the changes properly(See highlighted in yellow).
Please let me know if you need more deatails.

German umlauts are not shown correctly, when a received e-mail is opened the first time. What can I do?

When I open a received e-mail the first time, German umlauts (ä, ö, ü) are not shown correctly. Instead of them there are characters like §,$. When I close the e-mails and open them again the German umlauts are shown correctly. I don't know how to solve that problem. Who can help me?

''Zenos [[#answer-670786|said]]''
<blockquote>
Fascinating. Sounds like an inconsistency between the encoding being used and the encoding being declared. I can't think why it should change when you re-open the message, unless Thunderbird is adding a correct encoding declaration.
(Most users complain about it working in the opposite direction; messages stored as drafts often restore with damaged "special" characters such as smart quotes, accented characters and umlauts.)
</blockquote>

The maximize/minimize and close and buttons are not shown correctly when FF windows is maximized.

I have the same problem on all my computers, one running Windows 7 and two with Vista.
The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.

It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf

PDFs are not shown correctly at more than 150% size

Hi,
we use Adobe Reader 8.1.2 and we can´t change it in our company.
we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
Does someone have the same problem AND a solution?
Hajo

Hi,
I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

Since my last update to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

update 10.8.5 solved this problem. Thankyou anyway.

Placed PNG images which are made in 3ds max are not shown correctly in Ilustrator

Hello,
Why placed PNG images (renders) which are made in 3ds max (and then photoshoped) are not shown correctly in Ilustrator. Images appear very noise so you can't see almost a thing. the same pictures (renders) made in Revit appear ok.
Is there a solution to solve this issue?
Thanks.

You would have to provide screenshots of how it looks in PS, including the channels visible. MAX may have embedded extra channels that throw off AI. And of course check whether your PNG is actually 8bit, not 16bit.
Mylenium

Foreign characters are not printed correctly in Analyzer 6.5.0 and java 1.3.0_02

Hi,I am using Essbase at 6.5.3 level and Analyzer Enterprice edition at 6.5.0 level. The java plug-in is at level 1.3.0_02.Foreign characters are corectly dispalyed in Analyzer java web client, but when I try to print the report the foreign characters are not printed correctly.I have changed the contents of the font.properties file all code pages from 1252 to 1250. The characters are still not printed correctly.How to "force" the Analyzer print the foreign characters to print?Thanks,Grofaty

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

International Characters in PDF Forms are not shown correctly (Adobe Reader 11.0.06)

I have a PDF form served from a web application and shown in Internet Explorer and want to put in string values with norwegian letter like 'ÅRE ØRE ÆRE'.
These are not shwon correctly when I toggle "Highlight Existing Fields" and the focus is not on the text field in question.
I am runing on Windows 7.

I cannot reproduce this using a test form I created: https://files.acrobat.com/a/preview/e6b390e1-625c-4f59-86c5-c2ca07998279
Does the same thing happen with the form above? If not, can you share your form with us: http://forums.adobe.com/thread/1408375

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

Some icons are not shown correctly in Gnome tray

The image should tell everything. In the tray there should be icons from Guake, Dropbox and Skype. However only Skype is visible. Does anyone know where could be the problem?
I noticed that Synergy icon behaves also wrongly.
thanks
Jan

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

CJK characters are not converted correctly to PDF

We are developing layout using SMARTFORMS. We are using standard function module 'CONVERT_OTFSPOOLJOB_2_PDF' to convert the SMARTFORM to PDF. Chinese, Japanese, Korean characters are not displayed/Converted correctly in PDF documents. But in Spool these characters are showing correctly.
Whereas German, Italian, French are displaying and printing correctly and converting properly to PDF.Please suggest a suitable
note/correction for the above.

Hello dear,
Did you got a solution for this? Even i am facing the smae problem.
Warm regards,
Harshad.

Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac. It says only that the user has "custom permissions", which is true since there are ACL's in operation. However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action). The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround. I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

Hi,
I did two things to get it working, and haven't taken the time to sort out which did it. But it is working so it's good enough for me.
First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet". I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR. Bonjour went grey but stayed checked.
After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
So all working well.

COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Infotypes special characters are not displayed correctly

hi experts,
While entering names with special characters in infotypes it happens that some of them are not correctly displayed .
can you please help me out as soon as possible
thnx
harish

Thank you for your fast reply :)
The site is not online available unfortunately.
The character encoding used by Firefox is UTF-8 (automatically detected) which is correct. I even tried manually switching to other Chinese standards, but none of them brought a satisfieable result.
The site itself does not specify a font (the css only contains "font-family: Arial,Tahoma,Verdana;"), and the site does not provide a custom font either.
I noticed that if i copy and paste the text into word, the characters are wrongly displayed too using the font MS Mincho (so I assume Firefox automatically selects this font to display the characters which would explain why they are displayed incorrectly)
Ah, I now included the font "SimSun" in the css (which is installed on in windows and using this font the characters are displayed correctly in word) - and this solved he problem!
Thanks for your help!!

Symbol characters are not shown correctly in webbrowser

Similar Messages

Maybe you are looking for