Symbol font does not work in Keynot

The Symbol font is there, but selecting it from the Text pallette does not produce any Greek letters, only Latin ones. How does one get Greek into Keynote text??
BTW. Symbol font is installed and does work in Word.
Thanks
Glenn

You need to use the Character Palette (Edit > Special Characters). View = Roman, Category = Greek.
Or activate the Greek keyboard layout in system prefs/international/input menu.
In Unicode apps you normally use a palette or a keyboard layout to make such characters rather than just changing the font.

Similar Messages

Latexit service does not work in Keynote

Hi,
I would like to use the Latexit service to typeset an equation in Keynote. This works perfectly in Pages - I write the equation, select it, and hit my keyboard shortcut to call Latexit, which runs latex and returns an image and places it inline in the text.
This does not work in Keynote. The service is there, and it definitely runs latex on my equation, but the text just disappears and no image appears in its place.
Why does this work in Pages and not in Keynote. Is there anything I can do to get inline equations from Latexit in Keynote?
regards

Hi,
Apparently this is a limitation of Keynote, which is not able to insert an image in a block of text- which means its not able to do inline equations.
From the FAQ:
(Q): The service does not work with Keynote.
(A): The service does not work with Keynote 1, 2, 3, 4, 5, since Keynote cannot insert an image into a block of text; as a workaround, you can set in the Preferences, pane "Services", to register service calls in the history. That way, even if the service fails at inserting an image, this one becomes available in the history window, that could have been put in some corner for easy access.
So, a solution might be to use LatexIt to render the equation, and then insert the equation as an image into Keynote, but you then have problems to line it up with your text.
thanks for the help,

Sonata font does not work in MS word, windows 7

I purchased and downloaded Sonata Std. from Adobe. I downloaded it and installed it. I want to use it in Microsoft Word (Office 2013) - Windows 7. When I open a Word document, the Sonata Std. font name appears in the font select window, but after I select it and go to the document to begin typing, it reverts back to some other standard font (Cambria or Times New Roman).
It does not seem to work at all. This is very troubling, since I paid $30 for it.
Please help!

You need to install the custom keyboard layout that shipped with the font.
Add or change an input language -- Windows 7

Pasting text in certain fonts does not work in Titles

Hi..
Creating a simple title in Tamil language. Typed something in Google transliteration and copied the text. When pasting it in Final Cut Pro X, nothing is pasted. There is not even an error or warning message It just does not paste. Font chosen is Inaimathi which works fine in TextEdit or OpenOffice.
Found a tip elsewhere that we could paste the text in TextEdit first, and then copy the phrase from there to FCP, to avoid encoding problems. Tried that too, but no use.
For the same font, typing in English works fine. Any help much appreciated..
This is Hello in tamil ஹலோ , it works fine pasting from Google to this forum fine.. but not in FCP
Regards,
Chandra

Chandra_Pars wrote:
Hi..
Creating a simple title in Tamil language. Typed something in Google transliteration and copied the text. When pasting it in Final Cut Pro X, nothing is pasted. There is not even an error or warning message It just does not paste. Font chosen is Inaimathi which works fine in TextEdit or OpenOffice.
Found a tip elsewhere that we could paste the text in TextEdit first, and then copy the phrase from there to FCP, to avoid encoding problems. Tried that too, but no use.
For the same font, typing in English works fine. Any help much appreciated..
This is Hello in tamil ஹலோ , it works fine pasting from Google to this forum fine.. but not in FCP
Regards,
Chandra
This seems to have something to do with how these characters were created in the first place.
Copying and pasting the tamil word from your post above did not work. However, looking for these characters in the Character Viewer allowed me to enter them into a TextEdit document; and copying and pasting those into FCP X worked perfectly.
So how were these characters entered in the first place?

Shared font does not work when changed

Hi, I am using a shared font in an eLearning course. The font
is in a separate library file and is used in all pages. But if I
change the font in the font properties, the text in the other pages
does not show up. Has any one come across a solution for this
issue?
Thanks.

A file called FlashPaper2PrinterPort was on the network under
my personal folder. Is there a way to add this to my hardrive to
allow me to convert at home?

Setting for "Rely on system fonts" does not work

Hello,
Some time ago I wrote a VBA function that would print a worksheet to pdf. It worked great. I reformatted my system, and now the code no longer works. When I run the routine, I receive the error message, "When you create a PostScript file, you must reply on system fonts and use document fonts. Please go to the printer properties, 'Adobe PDF Settings' page and turn OFF the option 'Rely on system fonts only; do not use document fonts."
I have changed this setting within the Adobe printer setting in Excel, I have changed it in both the 'Printing Preferences" and "Printer Properties" with the Devices and Printers Windows dialog, and I have confirmed that it is turned off in the binary registry key "HKEY_CURRENT_USER\Printers\DevModePerUser\Adobe PDF". Also, I have applied the Acrobat 9.4.2 patch. Yet still I get the message when my code is executed....
There were a few changes between my system from before my reformatting. The common items were Windows7 64-bit, Adobe Acrobat 9. The changes were that I went from Microsoft Office 2010 64-bit to Office 2010 32-bit. Windows 7 SP1 is now installed. Also, both Acrobat and Office are installed on my internal "Data" drive, rather than the "C" drive where my operating system is installed.
Although I do not see an issue with code, since it worked for months, I have included it below (the printing code is at the end). Any help would be GREATLY appreciated!
Public Sub EnumOrder(ByVal lngLine As Long)
'lngLine is the line number to start enumeration at
Dim strStore As String
Dim strFileName As String
Dim strTmpPath As String
Dim strPDFPath As String
Dim c As Long
Dim x As Long
Dim lngErr As Long
Dim wsPicklist As Worksheet
Dim wsTemplate As Worksheet
Dim oPDF As PdfDistiller
Set oPDF = New PdfDistiller
Set wsPicklist = Worksheets("Phase II Picklist")
Set wsTemplate = Worksheets("Template")
strStore = wsPicklist.Cells(lngLine, 1).Value
' Clear formatted border on order template
wsTemplate.Activate
wsTemplate.Range("A7:L56").Select
Selection.ClearContents
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
Selection.Borders(xlEdgeTop).LineStyle = xlNone
Selection.Borders(xlEdgeBottom).LineStyle = xlNone
Selection.Borders(xlEdgeRight).LineStyle = xlNone
Selection.Borders(xlInsideVertical).LineStyle = xlNone
Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
wsPicklist.Activate
' Initialize variables
strFileName = wsPicklist.Cells(lngLine, 1) & "-" & wsPicklist.Cells(lngLine, 2) & " " & Format(wsPicklist.Cells(lngLine, 4), "mm-dd-yy") & " Team" & Format(wsPicklist.Cells(lngLine, 3), "00")
c = 7
x = lngLine
' Add store order data to the template
With wsTemplate
    ' Add header data to the order template
    .Cells(1, 2) = wsPicklist.Cells(lngLine, 1) ' Store #
    .Cells(2, 2) = wsPicklist.Cells(lngLine, 3) ' Team #
    .Cells(4, 2) = wsPicklist.Cells(lngLine, 4) ' Deliver By
    .Cells(1, 5) = wsPicklist.Cells(lngLine, 13) ' Ship To Name
    .Cells(2, 5) = wsPicklist.Cells(lngLine, 14) ' Ship To Address
    .Cells(3, 5) = wsPicklist.Cells(lngLine, 15) ' Ship To City/State/Zip
    .Cells(4, 5) = wsPicklist.Cells(lngLine, 16) ' Comment
    ' Add line items to the order template
    Do
        .Cells(c, 1) = wsPicklist.Cells(lngLine, 6) ' Part #
        .Cells(c, 2) = wsPicklist.Cells(lngLine, 7) ' Part Name
        .Cells(c, 7) = wsPicklist.Cells(lngLine, 8) ' Qty Ordered
        wsPicklist.Cells(lngLine, 10) = Now         ' Date Printed
        wsPicklist.Cells(lngLine, 11) = strFileName ' File Name
        lngLine = lngLine + 1
        c = c + 1
    Loop While strStore = wsPicklist.Cells(lngLine, 1)
End With
'Create formatted borders on store order template
x = lngLine - x + 6
wsTemplate.Activate
wsTemplate.Range("A7:L" & x).Select
With Selection.Borders(xlEdgeLeft)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeTop)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeBottom)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlEdgeRight)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlInsideVertical)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
With Selection.Borders(xlInsideHorizontal)
    .LineStyle = xlContinuous
    .ColorIndex = xlAutomatic
    .TintAndShade = 0
    .Weight = xlThin
End With
' Print the store order to PDF
strTmpPath = "D:\Eric\Desktop\WIS-Speedway\Phase II\Picklists\New\Tmp\"
strPDFPath = "D:\Eric\Desktop\WIS-Speedway\Phase II\Picklists\New\"
wsTemplate.PrintOut copies:=1, preview:=False, _
ActivePrinter:="Acrobat Distiller", printtofile:=True, _
collate:=True, PrToFileName:=strTmpPath & strFileName & ".ps"
oPDF.FileToPDF strTmpPath & strFileName & ".ps", strPDFPath & strFileName & ".pdf", ""
' Set active cell to next store order
wsPicklist.Activate
wsPicklist.Cells(lngLine, 10).Select
End Sub

Ok, I have given up the ghost on this problem. I found a MUCH better solution to the problem that I was having, that also has the side benift of processing far faster. See http://msdn.microsoft.com/en-us/library/ee834871(office.11).aspx for details. Basically, I am now using the VBA ExportAsFixedFormat method, rather than Distiller. Hope this helps.

My first generation Ipad does not work with Keynote.

The program appears to run normally, but it won't project. My colleague's identical ipad works with our projector, and my cable works on his ipad. What is wrong?

Here are some things to try:
- Restart the iPad
- Remove and reinstall Keynote
- Restore the OS on the iPad
One of those might fix the problem.
Regards.

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Linking Keynote on iPod-Touch with Keynote on MacBookPro does not work.

I purchased Keynote 5.0.5(942) for my MacBookPro (MacOS 10.6.7), and
KeynoteRemote 1.2 (53) for my iPod-Touch 4th generation.
I am trying to link KeynoteRemote on the iPodTouch with Keynote on MacBook Pro.
KeynoteRemote gives me a Passcode, which I enter in the preferences panel on Keynote for MacBookPro.
Verification does not work. Nothing happens, and after sometime an error message appears that
verification has failed.
I have tried to do all combinations of setting the firewall on or off, and checked out all linkage and network settings.
Does anybody know what the tricks are to get KeynoteRemote to work with Keynote on MacBookPro?
Or does KeynotePro not work at all?

thanks, David. it works now. I think the problem was the firewall. I fixed it now.

Why does CSS' "@font-face" not work in FF8.0?

I am using embedded fonts via CSS' @font-face, which works perfectly in IE9, Safari 5.1.1 and Opera 11.52. However it does not work in FF8.0 (or Chrome 15.0.874.121) and falls back to Verdana.
Here is my CSS:
body,td,th {
font-family: DragonwyckFont, Verdana, Geneva, sans-serif;
@font-face {
font-family: "DragonwyckFont";
src: url("../fonts/Dragonwyck_Normal.eot");
src: url("../fonts/Dragonwyck_Normal.eot?#iefix") format('embedded-opentype'),
url("../fonts/Dragonwyck_Normal.ttf") format('truetype');
This is being tested on a W7 box, using localhost: on IIS.
Any help or advice would be much appreciated.
Thankyou in advance.

Hi cor-el,
Thanks for your very quick reply, unfortunately the solutions you offered have been unsuccessful.
I did as you suggested (including deleting the relative path and placing the fonts in the same directory as the CSS) and followed all the advice given in the references you made.
I am not going across domains so Access Control Headers are not required.
Bizarrely, the link from the demo (https://developer.mozilla.org/en/CSS/@font-face) works perfectly but, when I replicate it using the full path to Dragonwyck_Normal.ttf, it doesn't.
My little brain is starting to fry and I must be doing something completely daft but, with just half a dozen lines of code, I fail to see how it could be more simple!
CSS:
body,td,th { font-family: "Dragonwyck", serif; }
@font-face {
font-family: "Dragonwyck";
src: url("Dragonwyck_Normal.ttf");
Any ideas?
Regards,
Chaindrive.

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

Changing the font size does not work with Textarea with HTML Editor

If you change the font size in the text area of a "Textarea with HTML Editor" item it does not work. I've searched the forum and the only solution I've seen is to use an HTML editor foriegn to APEX. Does anyone have a better solution? Thanks, Elizabeth

I'm having a similar issue except with HTML Editor Standard.
What I'm doing is allow someone to write to an HTML Editor Standard field and then an HTML marked up text is saved to a db CLOB column. In another page, I reference this DB column and show it in an HTML Region (I do a computation Before Regions for a hidden item that writes out the html with "htp.p")
Everything shows up fine EXCEPT the font tags and headings. I'm finding that the HTML Region sets the font size only with the < d i v s t y l e="font-size: large" >and NOT < f o n t size:6 >. When the HTML Editor renders the user's text input, any size changes are made with the < f o n t > tag, which is depreciated anyways, and not with "style". That's why the size is not showing up.
I can't really figure out why the headings aren't showing up except maybe the css style in the region is overridding it...
Is there another APEX item type like HTML Editor (which uses FCKEditor) that I can use, or maybe another approach to remedy this issue? Or maybe this post calls for an enhancement with the HTML Editor?{size}{size}
</div>
Edited by: maui26 on Mar 4, 2009 10:43 AM

Keynote remote function does not work anymore

I have updated my iphone 5s to iOS8 (8.0.2)
I use mavericks OS X 10.9.5 on my macbook pro.
Since i have updated my iphone, and KEYNOTE apps, I can't control my presentations with Iphone anymore .
I tried with an Ipad and all works great but i can't link my phone to keynote on mac via network or bluetooth.
Before upgrading my Iphone worked properly with this function.
When i open Keynote-preferences---remote controls on my mac, i can see the Iphone listed, but with a yellow triangle and the button to link it does not work.
anyone can help me ?
thank you.
Mauro

thank you Gary,
I guessed it too, but unfortunately i have something like this:
It's not english, but maybe you can notice that the last device has not "RIMUOVI" (REMOVE) function, but just "ABBINA" (LINK)
even if i push that button nothing happens and the little triangle persists.

"Search font .." does not work and CS2 crashes with every program shutdown ??

Since yesterday Indesign is showing some strange behaviour ...
At first I encountered that the "search font ..." dialogue does not work anymore, it just does not appear! It´s just as I wouldn´t have clicked anything ... That´s quite a prob for me, I really need this function, because I get a lot of documents with lots of fonts which I have to change. How can this function disappear??
Another strange thing: since the font changing function disappeared Indesign chrashes with everey program shutdown (I´m working on Windows Vista) and on the other hand it´s suspiciously quick when starting ...
Has anyone an idea how I can fix this?
Thanks!

Maybe good to know: I do not use more than one monitor. I have used the search font function before on the same day it was disappearing. I was working in a document with several hyperlinks imported from Word. as it happens.
Any suggestions? I really need help!

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade. Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
Good luck.
david

Symbol font does not work in Keynot

Similar Messages

Maybe you are looking for