$ symbol in the report

Hi ,
I have 0CURRENCY in the cube and it is populating from the source system table as USD .
But my user wants to display the ' $ ' in front ogf the value in Bex Report .
Like my user wants $100, $2500, $3500, $4000 in the Bex report .
So how can i display the '$' in the report
Mubeen

Hi All
Thanks alot for your replies .
I dont want to change the 'Alternative currency in the SPRO settings' . Because i dont want to distrub other reports currency .
I want to display $ for my cube data in my Bex report .
So how can i do this one specific to one cube and reports on that one .
Regards
Mubeen

Similar Messages

Displaying % symbol in the report

Hi Experts,
Can anyone tell me how do I prefix % in my report.
I have a column which does a calculation
Total Completed Call/ Total calls created *100.
The value i get is in number, which i want to display along with percentage %.
Please help.
Thanks

Hi AHMED,
at query designer, you can achive this by creating new formula or Calculated Key figure.
at columns, rifght click on structure -> New formula -> edit mode and
double click on KF (Total Completed Call), Under Operations then expand percantage fucntions select Percentage Share %A then double click on KF (Total calls created)
formula looks Like this 'Total Completed Call ' %A 'Total calls created '
Best Regards.

How can I will declare the symbol u2018 (Single Quote) in the report

Hi ,
Could you please tell me how can I will declare the symbol u2018 (Single Quote) in the report.
My requirement is that I have concate the data with single quote and after that I have to store the data in to an internal table and I have to download the data in the form text file in the presentation server.
For example :
Let the below data I want to download into the presentation serve in the format of text file by storing in internal table.
Assume all are constants:
1st line : abcu2019add
2nd line : defu2019gef
Thanks in advance.

Hi Jyothi,
Thanks for the quick reply .
I can agree with you are point but My requirement is like this I am explaining clearly.
I have declared the internal table like this.
DATA: BEGIN OF OTAB OCCURS 0,
LINE (9024),
END OF OTAB.
So I have to append the each line item into the internal table.
So I am explaining what the data I have to append
Ist line contains
'UNBUNOC:2020308u2019 where 020308 I will get the date from reguh table
2nd line contains:
'DTM+20020510' where the 20020510 will be reference document number from the table reguh.
So I want to declare a constant 'UNBUNOC:2
2nd the date from reguh table
And another constant u2018
So that I can concate all the three and I can put into string and I will append into internal table and I can download the data into the presentation server.
Please let me know if you need any more clarification regarding my requirement.
Thanks in advance.

No Reporting Symbol for the cube.

Hi all,
no reporting symbol for an cube.
I created Z cube without any aggregates and loaded data sucessfuly QM status is green but i'm not able to see the reporting symbol next the request id. When i checked in manage content data, data is available for the fact but not for any dimension table.
Please go through the following when we did the diagnosis.
Diagnosis
    There is an inconsistency between the load status of the data and the
    option of reporting on this data.
    There is data in the InfoProvider that is OK from a quality point of
    view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000003343, number
    REQU_44ROL5YBBCJMDL5HQ8TVBAER6.
Procedure
    Choose Refresh to remove the inconsistency.
As per the procedure we did but went to short dump
UNCAUGHT_EXCEPTION
CX_SDB_ORA_PROGRAM_ERROR
Highly appreciable if any one could resolve our issues.
Thanks in Advance.

Hi Niyati,
What is your BW version. If it is BI 7.0 then check these OSS Notes:
975948 No update statistics for newly created tables
998904 Statistics check shows red or yellow traffic lights
If it BW 3.X version then run the RSRV check for the cube.
Bye
Dinesh

Symbol # is comming at the reporting level

Respected all BIs
I have created a report in which one of the infoobjects contains text field of length 40 type char.
along with the text values it also contains symbol # at the very bigining, i have checked every where but fing no clues from where the symbol is comming at my reporting level, is there any setting from which i could remove this symbol.
thanks
abhay

hi
is there any value coming against the # . if yes, then chk whether it is useful or not, then u can restrict the query in designer as suggest above.
thanks
neha

Unable to see data in the report or workbook

Hello All,
We are struggling to display data in the report level or workbook, however the data is available in Multiprovider.
Error Message: "No Applicable Data Found"
Steps Carried Out:
1. Dropped the BIA Indexes for relevant cubes and Reactivated the Multiprovider, still did not work.
2. When we checked for previous years like 2013, we are able to see data in the report. To elaborate an issue, we loaded budget data for year 2015 as requested by user. Restricted the same filters from the Query in the Multiprovider and able to see the data in the backend, however not data can be seen in the Report.
3. Three Hierarchies are restricted in the Filters of the Query.
It would be great, if any of you can help us to fix the issue.
Best Regards,
Sudhakar

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

Missing Line Items and '?' Symbols in some Reports

I have upgraded the patch level of my production server and patch level
list is given below
SAP_BASIS 640 0022 SAPKB64022
SAP_ABA 640 0022 SAPKA64022
ST-PI 003C_640 0001 SAPKITLPS1
PI_BASIS 2006_1_6400006 SAPKIPYL06
SAP_BW 350 0021 SAPKW35021
SAP_HR 500 0017 SAPKE50017
SAP_APPL 500 0019 SAPKH50019
PI 2004_1_5000004 SAPKIPZI64
problem is that whenever I run SAP FICO standard reports FL3N, FBL5N,
KB01, F.08 etc it generates the report correctly but when i am taking
print out of these reports it misses some line items and total value as
well screen shots are attached for information.
my second problem is that there are some garbage entries with
symbol '?' in SAP Menu and toolbars of some Reports. Screen shot is
also attached for your information.
i am facing lots of problem in executing my daily operations due to
these errors.
regards,
Majid Khan

Dear Subramanian,
I am facing the same problem in Development and Quality Assurance Server
Regards,
Majid Khan

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Currency symbol in interactive report

Hi,
I used oracle format masks "FML..." to show the euro symbol which is defined in the Process "execute immediate 'alter session set NLS_CURRENCY=''€''';"
When it is the first time to open the report, euro symbol shows. But after you do other actions like using filter, the sign changes to '$'. How to control this?
Thanks in advance!
Edited by: user8991541 on Feb 1, 2010 2:41 AM
Edited by: user8991541 on Feb 1, 2010 2:49 AM

Hello:When it is the first time to open the report, euro symbol shows. But after you do other actions like using filter, the sign changes to '$'. How to control this?This is because Interactive Report regions use PPR (Partial Page Refresh) for filtering/sorting etc. So, your page-processes don't execute. Your best bet is to apply the currency format in the query itself. Something like
select to_char(some_amount,'FML999G999G999G999G990D00') from amt_table;
varad

User wants to display the % symbol beside the value

Hi all,
I have a key figure ..which is added to formula(aggregation tab set as average of a characteristic).
its displaying average correctly in the report output ,but user want it to be displayed % symbol beside that .
how can i do that ..
For other KPI ..i got the requirement as A-B/B and here i applied A-B %A B and its working fine.
What if i need to put % symbol beside a value ??

Hi Bilvanth ,
You can follow the below steps to achieve the desired output :
1) Create a formula in the query designer . Suppose your key figure is Y which you want to display with % symbol .
Take this key figure in the formula . Then from the Percentage Functions choose (%A)Percentage Share. Then after this write 100 .
So your formula would be : Y %A 100 .
2) Hide your original key figure Y and display this formula in the report . It will come with the percentage symbol .
Hope the above steps will help you to achieve the desired output .
Thanks & regards,
Ashutosh Singh

To display icons in the report

Hi All,
I am Building a report transport request tracking.....in my master data....i have an infoobject :'import status of a request'....in which symbols are stored like truck symbol,arrow symbol,red error symbol,green symbol(means successfull) etc...and their corresponding texts.....but when i am seeing the output of the report text is coming and when i am changing it to key...instead of displaying the symbol something else is coming....for ex ---green symbol - @5b@ red error symbol-@5c@ etc.....then i found out that in SAP these symbols are stored internally in this way only.....so i guess when SAP is trying to send the data to excel...it not able to interpret what sap system interprets internally .....
is there any way i can display those symbols in my report ?
Regards,
Deadlocks

I raised a post about replacing text and/or keys with an image file about a year ago. As far as I know there is no way to get BEx to do this for a dynamic list (i.e. where the data in the rows / columns is not always on the same row / column).
Try the following:
Replacing text descriptions with an image file
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954
/people/dinesh.mukundu/blog/2007/05/23/bi-70-bex-macros-for-formatted-reports-at-sap-teched-2007-las-vegas
Good luck and, if you are successful, I would be very keen to see how.

Running the report in Bitmap and Character mode

Hi,
We have the reports which can run in both the character mode and Bitmap mode. The only problem I'm facing is font size in the character mode report. If the report is run in Character mode then the font size of the report will be greater. As the sizer is bigger, I'm getting the X symbol in the place of report. Can i reduce the size of the font. I'm using the font Tahoma (8 points). Reports 6i Version and Windows Xp is the OS.
Regards,
Alok Dubey

Hi this may solve u'r problem
In Oracle Reports Designer, bitmap mode, you can make "C"
bold and in a different font and point size than "c". This
is because you are generating postscript output.
Postscript is a universal printer language and any
postscript printer is able to interpret your different
design instructions.
In Oracle Reports Designer, character mode, the
APPLICATIONS STANDARDS REQUIRE the report to be designed in
ONE FONT/ ONE CHARACTER SIZE. Character mode reports
generate ASCII output. In ASCII you cannot dynamically
change the font and character size. The standard is in
effect so a report prints as identically as possible from
both conventional and postscript printers.
by....
stanma

Report Server 10g - unexpected font change on second page of the report

Hi all,
I'm having a problem with Oracle Report server 10.1.2.3.0.
It's sometimes using an unusual font (It think it looks like a Greek one).
One example would be when a text overflow from page one to the second page it will change from Times New Roman to a "Greek" font and switches from bold to normal font it still happens in the same "Text" type item just on a new page. However when I update the text in the DB to a longer one so it flows through the whole second page to the 3rd page then it's using the correct font again.
When I open the generated PDF file in a text editor I see an unusual value in one of the font settings "/BaseFont /#53#79#6D#62#6F#6C" when I edit it manually to the value taken from another occurrence of the "BaseFont" in the same file it helps and changes the font to the correct one.
When I export the report to the PDF from report builder it's always using the correct font.
The encoded font "/#53#79#6D#62#6F#6C" translates to: "Symbol"
select CHR(TO_NUMBER('53','xx'))||CHR(TO_NUMBER('79','xx'))||CHR(TO_NUMBER('6D','xx'))||CHR(TO_NUMBER('62','xx'))||CHR(TO_NUMBER('6F','xx'))||CHR(TO_NUMBER('6C','xx')) from dual;
The correct font is as expected "Times-Roman"
I noticed that this happens only when HTML code is allowed in the Text/field. When I generate HTML version of the report I see after the page break and new table on the new page the following tag <font face="symbol">. When I set Web Setting->"Contains HTML Tags" set to NO then font stays the same even after the page break.
Did anyone experienced something similar?
Thank you,
Palo

We have had this a few times before and there are 2 ways that most likley will fix this.
If on mac close all adobe apps, do a find for all files with the .lst in their file name. Delete all you .lst files, they are font database files that go corrupt and will regenerate themselves when needed and usually a working copy.
Close any multiple master fonts you have open in fontbook, and other utility such as Suitcase. Multiple master fonts will have a filename like "Kronos mm", and in the adobe illustrator type >> font menu i believe they have a different icon (possibly a mm) than the others {a(type 1), tt(true type), O (opentype)}
Your problem is likely the 1st option, as the mm problem usually happens while editing the file, while the other is after you open the file. If you still have the problem, you then may have 2 different fonts sharing the same FOND ID number. Close as many fonts as you can, especially the one that looks like your wrong font.

Not getting Euro Symbol in PDF Report using XML Publisher

Hi,
We have developed an Oracle Report from Report Builder 6i and also a Template in RTF Format.
We are using XML Publisher to display our XML Output in PDF Format to Users..
There is a Field called Comments on Customer Transaction Form, where user can enter any characters and that we are querying in Report and displaying on the PDF Output.
Currently, the user entered a Euro Character on the comments section and that was not visible to user on PDF Report and replaced by a Question Mark as below:
"3% price reduction ?89.91, 20% marine"
When i am Querying to the Database, i am able to see the Euro Symbol, but when i checked the XML generated on the Unix Box for the Report. I found as below:
"3% price reduction \342\202\25489.91, 20% marine"
So, the Euro Symbol on the database is replaced by " \342\202\254" in the XML Output and ? in the PDF Outbut.
Please help ASAP.
Regards
Saurabh Jaiswal

one way
value set based on view (view - select level id, chr(level) cl connect by level <= 500)
for example, chr(64) - @
so in xml you have code of @. sample xml is
<ROWSET>
<ROW>64</ROW>
</ROWSET>in rtf template pick
<?xdofx:chr(to_number(ROW))?>
select chr(14844588) from dual
€Edited by: AlexAnd on Aug 23, 2011 12:46 AM

ACCENT Symbol in Oracle Reports printing using 10g Application server

Some of the report with names containing ACCENT symbol are printing like upside-down comma. But the report used to printing certified copy and the client requiring to print the ACCENT symbol as it is. Oracle support recommend us to use PDFPrint destination, which is third-party utility that converting the post-script output to printer for ACCENT symbol. Please provide the link and instruction to download the PDFprint utility and installation requirement for the below environment:
Oracle Application Server Version=10.1.2.3.0
SUN SPARC - 64 bit
Thanks
Krishna

By the looks of it you used 9i which also used an Application Server so your knowledge should be up to date. The Default URL has changed a little as has the port. Look in the installation guide for the default URL and port.
If you mena the development side you can use the one-button-run functionality which makes it possible to run am form without the full App Server just by hitting the run button in the builder. You do need to start the local OC4J but that is easy. On Windows there is a start menu item to do that. On Linux you run a shell script I think.

$ symbol in the report

Similar Messages

Maybe you are looking for