Symbol LA-4137's (Spectrum 24 Hi-Rate) sends repeated LEAP auth requests

Anyone using the Symbol LA-4137 ?
I'm troubleshooting at a hospital and they have many of these Symbol LA-4137 connect to a Alaris Pump. LA-4127 client is setup for LEAP and is sending 5 authentication packets per second. The radius server sends back a success only to get another re-auth request immediately. The network is Autonomous 1220s running 12.3(8)JA with WDS setup.
This large volume of traffic from the Symbol LA-4137s (these are Alaris Pump's from Cardinal Healthcare) generates a Passed Authetication Attempts csv log file of 100MB per day on ACS. I estimate this is about 512,000 auths per day, far too much traffic. We upgraded ACS to 4.1 for multithreaded LEAP support and added another CPU as we say ACS failing to respond due to every packet due to the shear volume of packets it was getting from these Symbol devices.
No roaming is occuring. The Alaris Pumps are usually placed in patient room and kept their.

Similar Messages

  • Error when other people send me a meeting request

    Dear Microsoft,
    When other people send me a meeting request, they get the error you can see below (it says: "Your message can not be delivered to the following
    people or distribution lists"). The strange thing is that I receive as well the meeting request and I can accept it. However, it is confusing for the people who send me the request, so can you help me to fix te problem? 
    I use Outlook 2010, but I had also this problem with an older version. I have not had this problem always. The problem started when I authorized a colleague
    to look in my calendar (but, if I cancel the authorization it doesn't help, so I really don't understand what is going wrong!).
    I really hope you know a solution of this problem.
    Kind regards,
    Dineke Wolbink 
    The error (in dutch):
    Uw bericht kan niet worden bezorgd bij de volgende personen of distributielijsten:
    19d23aca-f069-4dfb-8f90-47ee2b07317f
    Het e-mailadres van de geadresseerde is niet gevonden in het e-mailsysteem van de geadresseerde. Microsoft Exchange probeert dit bericht niet opnieuw te verzenden. Controleer het e-mailadres van de geadresseerde en probeer dit bericht nog eens te versturen
    of geef de volgende diagnosetekst door aan uw systeembeheerder.
    Diagnostische gegevens voor beheerders:
    Bronserver: CPHUB-ZH01.kpneol.local
    IMCEAEX-_O=KPNEOL_OU=EXCHANGE+20ADMINISTRATIVE+20GROUP+20+28FYDIBOHF23SPDLT+29_CN=RECIPIENTS_CN=*** E-mailadres is om privacyredenen verwijderd ***
    #< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found> #SMTP#
    Oorspronkelijke berichtkoppen:
    Received: from CPMBS-ZH01.kpneol.local ([169.254.2.62]) by
     CPHUB-ZH01.kpneol.local ([10.94.81.134]) with mapi; Thu, 30 Jan 2014 10:13:10
     +0100
    Content-Type: application/ms-tnef; name="winmail.dat"
    Content-Transfer-Encoding: binary
    From: Dineke Wolbink <hier stond mijn e-mailadres>
    To: 19d23aca-f069-4dfb-8f90-47ee2b07317f
                <IMCEAEX-_O=KPNEOL_OU=EXCHANGE+20ADMINISTRATIVE+20GROUP+20+28FYDIBOHF23SPDLT+29_CN=RECIPIENTS_CN=*** E-mailadres is om privacyredenen verwijderd ***>
    Date: Thu, 30 Jan 2014 10:13:04 +0100
    Subject: hoi
    Thread-Topic: hoi
    Thread-Index: Ac8dm3/BkI5G2ujIRKKYyE6kqe5htgAAAFlQ
    Message-ID: <*** E-mailadres is om privacyredenen verwijderd ***>
    Accept-Language: nl-NL, en-US
    Content-Language: nl-NL
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator: <*** E-mailadres is om privacyredenen verwijderd ***>
    acceptlanguage: nl-NL, en-US
    x-originalarrivaltime: 30 Jan 2014 09:13:04.0347 (UTC)
     FILETIME=[7B5702B0:01CF1D9B]
    kpn-deliveryagentmarker: 1
    x-rcptdomain: syntro.nl
    x-brand: 6aXqz76n4qX03qPpzQ==
    MIME-Version: 1.0

    Hi Dineke,
    You can contact your Exchange administrator to run the following command to check it:
    Get-Mailbox –Identity yourname | Select Name, HiddenFromAddressListsEnabled
    Or you can view your colleague’s Default Global Address List in OWA to check whether you are listed there or not.
    Please check whether there is any transport rule or Outlook rule setting in your mailbox. Also change a new computer and create a new Outlook profile to have a try.
    Best Regards,
    Winnie Liang
    TechNet Community Support

  • Error by sending a Web Service request

    Hi,
    we generated a WSDL from an outbound-interface and build a web application with it. When we send a Web Service request to SAP-XI from our Web Dynpro client application, we get an error "CALL_CONSUMER_ERROR" (of category "XI_J2EE_MESSAGING_SYSTEM"). We find the following entry in the message-log of the adapter engine:
    Error: Return of synchronous errormessage to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier.
    Error: The Transmission of the message with https://hpsaps01.inveos.com:8001/sap/xi/engine?type=entry failed, because: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
    does anybody know, how to solve this problem?
    Greetings
    Hildegard

    Hi Stefan,
    correct certificates are established in the meantime and the error-message in the adapterlog has changed. The errorcode still remains "CALL_CONSUMER_ERROR" of category "XI_J2EE_MESSAGING_SYSTEM".
    Adapter-log:
    Error: Return of synchronous errormessage to the calling application: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: java.net.ConnectException: Connection refused.
    Error: The Transmission of the message with https://hpsaps01.inveos.com:8001/sap/xi/engine?type=entry failed, because: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.RuntimeException: Error while silently connecting: org.w3c.www.protocol.http.HttpException: java.net.ConnectException: Connection refused
    Are there missing any more permissions or is this another error in the configuration?
    Regards
    Hildegard

  • Upload of Customs Duty Rates (xml file) without transport request creation

    Hi All
    Can we upload the Customs Duty Rates (xml file) without transport request directly in the system.
    Thanks & Best Regards
    Kiran

    Hi Kiran,
    Please check transaction & program /SAPSLL/TLC_CUSB_UPL in GTS.
    This allows you to upload the XML from a local source or an application server path.
    I do not think a transport request is required in this scenario.
    Best Regards,
    Eoin

  • BBM pack is activated by vodafone but i am unable to send and receive friend request.

    I am using BB9220 and Service provider is Vodafone. BBM pack is activated by vodafone but i am unable to send and receive friend request. EDGE is written in caps on top right of the screen but messenger is not working. kindly help me out. 

    sahilnayyar wrote:
    I am using BB9220 and Service provider is Vodafone. BBM pack is activated by vodafone but i am unable to send and receive friend request. EDGE is written in caps on top right of the screen but messenger is not working. kindly help me out. 
    Hello sahilnayyar,
    Please perform hard reset by pulling the battery while your BlackBerry is ON and reinsert again in a few seconds. Now try again to send or to received friend request/s. 
    Make sure the other user have sufficient BlackBerry data plan.
    Thanks.
    Good luck!
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Aluminium keyboard sending repeat keystrokes/not recognised during startup

    hi everyone, my first post here,
    i recent purchased an additional slimline alu-keyboard for my imac to customise as an editing keyboard for logic pro. only problem is i appear to be having issues with it. recently it has been sending repeat keystrokes in os x. it's not one of the letter keys because no text is typed onscreen. the other issue is that during startup none of the boot-up keys are recognised (ie. reset pram combination/bootup menu) with leads me to belive something is very wrong.
    i have already tried reseting the pram - although i had to use my other keyboard to do this as the new one isn't recognised. i also tried reseting the smc but it seems certain that there is an issue with the keyboard itself
    the keyboard is still well within warranty and i have my receipt but i'm concerned about the fact that it has been customised with a editing layout set and might not be replaced
    hope someone can suggest something!
    thanks
    j

    ps. i just did a little further googling and it seems to be suggest that this is a 10.5.6 usb related issue

  • I have 2 Company ipads. They were set up by someone who has left the company. His email address was deleted when he left - so we cannot send a recovery email request.  He connected both iPads to 'find my iphone' - and we cant locate his mobile! help!

    I have 2 Company ipads. They were set up by someone who has left the company. His email address was deleted when he left - so we cannot send a recovery email request.  He connected both iPads to 'find my iphone' - and we cant locate his mobile! help!

    If you have the original receipts, you can take them to an Apple Store and they may be able to remove the activation lock. A good lesson learned to have an employee clear a device when leaving.

  • The mail server responded: sorry, the sender name and auth login doesn't coincide (#5.7.1)

    I get the following message on trying to send emails from my yahoo account
    An error occurred while sending mail. The mail server responded: sorry, the sender name and auth login doesn't coincide (#5.7.1). Please verify that your email address is correct in your Mail preferences and try again.
    Help!

    Check if the client connector used to connect with the 587 port is allowed to accept authentication on Plain Text.
    Try a relay connector if you want to send the email without the authentication.
    http://technet.microsoft.com/en-us/library/bb232021(v=exchg.141).aspx
    Syed MM Messaging SME - IBM || MCTS || MCSE || MCSA || VCP5 || VCA ||

  • IPhone is sending repeated Outlook acceptances

    About 3 weeks ago, I got an Outlook meeting invitation, which I accepted.  My iPhone started giving me repeated messages that it could not send the acceptance, but there was nothing I could do about it.  Now, in the last several days, I discovered that the phone is sending repeated acceptances, two every few hours, to the poor guy who invited me.  It seems to be tied to the iPhone, more than Outlook, and given the recent problems between iOS6 and Outlook, I was wondering if any one else has seen this behavior, and if there's a way to fix it?
    Thanks.

    Same here.. My girlfriend imported her calendar in iCloud from work and iCloud has send everyone in her appointments an email. Not funny....
    I'm afraid that if she is deleting her iCloud calendar everyone will get a mail that the meeting is canceled. By the way she exported her work calendar to an .ICS file which she imported in Outlook at home. Then she copied the calender (no other way) to iCloud.
    Apple I love your stuff but please do not mess around with this stuff or warn people better.. You can not send everyone in someone's calendar an email without let the user decide wether she wants that or not....
    Will Google further for solutions...

  • Sending parameters in ajax request

    suppose i have 100 parameters to send in an ajax request how can i send that, is there any mehcanisam for that?
    Thanks,

    If you are doing a post, you will have no problems, because a post request doesn' have limits. When using AJAX to post request this parameters are passed thru the querystring.
    http://developer.mozilla.org/en/docs/AJAX:Getting_Started
    MeTitus

  • TS1506 My attachment symbol is not visible when I am sending an email. How do I get it back?

    Attachment option is not visible when sending an email through aol.com.

    When you are composing an email tap at the location you want to insert a photo or video. The option to insert comes up. Tap on that and select the photo or video you wish to insert.
    Alternately you can use the Photos app and select up to five photos to insert into an email. Tap select, select the photos and then tap the Share icon. Select Mail and an email will be created. You can then address the email, add a subject and type in content.
    To attach other things like a PDF, Word Doc, etc. you need to use the app that creates or edit seize items. Again select the item you want to email and tap on the Share icon in the appropriate app.

  • Sender RFC adapter Error- request was null while trying to extract it.

    Hi All,
    I  have a scenario running in Production(PI 7.0 system) where SAP ECC sends RFC request through sender RFC adapter. The scenario was working fine but now I am getting the below error in default trace and I couldn't see any error in communication channel monitoring.
    java.lang.Exception: RfcServer[BAS_ECC_RFC_Snd]1[AFSenderD] request was <null> while trying to extract it.
    I have gone through the below thread and performed a full cache refresh but it didn't help :  
    [NULL]
    I have gone through SAP note:730870 and I couldn't get any help on this error. Can you please suggest your ideas to solve this issue.
    Thanks & Regards,
    Laawanya

    Hi Lawanya,
    Check you RFC and input data , whether the RFC call is able to get the data from ECC or not.
    you can test the same RFC in ECC with input data and you can check whether the RFC in ECC is return the value or not.
    I gues in your case the RFC in ECC is not return any data  to PI.

  • How to send PUT, DELETE HTTP request in HttpURLConnection ?

    Hi all.
    I want to know that is it possible to send PUT, DELETE request (practically) through java.net.httpURLConnection to http based URL. I have read so many articles describing that how to send GET, POST, TRACE, OPTIONS request but still not finding any sample code which successfully perform PUT and DELETE request. Can any one give idea regarding that?
    Thanks

    Help_Me_Solve wrote:
    Hi all.
    I want to know that is it possible to send PUT, DELETE request (practically) through java.net.httpURLConnection to http based URL. I have read so many articles describing that how to send GET, POST, TRACE, OPTIONS request but still not finding any sample code which successfully perform PUT and DELETE request. Can any one give idea regarding that?
    ThanksIt's technically possible I am sure but 100% impractical because almost nobody uses an HTTP server for that purpose. I don't know what HTTP servers actually implement PUT and DELETE but you can be sure even in those that do the behaviour is off by default.
    If you need to do PUT/DELETE sort of operations you should be using FTP.

  • BC Sender Adapter--400 Bad Request

    Hi,
    I am trying to integrate BC with XI(BC Sender Adapter). BC will send Data to XI.
    In BC, i have specified a routing rule( as specified in help.sap.com) using the following parameters :
    URL:http://<hostname:portnumber>/MessagingSystem/receive/BcAdapter/BC
    User:xiappluser
    When i test this service, it gives the error 400 Bad Request. I tested the validitly of the above URL by loggin in through a web-browser. The messaging servlet is seen in active status.
      <?xml version="1.0" encoding="UTF-8" ?>
    - <scenario>
      <scenname>MSG_SCEN</scenname>
      <scentype>SERV</scentype>
      <sceninst>MSG_001</sceninst>
      <scenversion>001</scenversion>
    - <component>
      <compname>SERVLET</compname>
      <compdesc>Messaging System</compdesc>
      <comphost>localhost</comphost>
      <compinst>MSG_001</compinst>
    - <message>
      <messalert>OKAY</messalert>
      <messseverity>100</messseverity>
      <messarea>QR</messarea>
      <messnumber>801</messnumber>
      <messparameter>na</messparameter>
      <messtext>MessagingServlet is active.</messtext>
      </message>
      </component>
      </scenario>
    Even when i test the URL http://<hostname>:50000 from BC,the response code is 200(success). But the problem is when i try to post the request to messaging servlet (400 bad request).
    Can some body suggest me how to go about.
    Regards,
    Siva Maranani.

    hi,
    I was able to get the error details of "400:Bad Request."
    The error is :
    com.sap.aii.af.ra.ms.api.MessageFormatException: got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
    org.xml.sax.SAXexception:got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
    Below is the xmldata, that i am sent to XI:
    <?xml version="1.0" encoding="iso-8859-1"?>
    <sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
      <sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
        <saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC</saptr:From>
        <saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">XI</saptr:To>
      </sap:Header>
      <sap:Body>
        <rfc:ZSIVAINSERT xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
          <CARRID>AA<CARRID>
          <CONNID>0017<CONNID/>
          <FLDATE>20040417<FLDATE/>
        </rfc:ZSIVAINSERT>
      </sap:Body>
    </sap:Envelope>
    I do not understand the name/namespace it is looking for. Kindly help me out.
    Regards,
    Siva Maranani

  • WRT120N issue: sending hundreds of connection requests per second

    I have a WRT120N and for about 1 year it worked perfectly but then my ISP started cutting off my internet because when the router tried to connect to the internet it sent hundreds of connection requests (or so they sad), even after I upgraded the firmware to 1.0.04 I still had the same problem. I got angry and started using it as a switch. Now I see that there is a new firmware out, 1.0.05, I hope that the same problem will not persist. But if someone can help me with some tips please say so. Thank you and happy holidays, Ewald

    If, after a reset, it hasn't cleared. Take a look at your systems to see if you have a trojan or some backdoor virus that it trying to open connections in the background.
    In other words, do a complete scan. And not with that free crap either, they don't pick up everything.
    Hackers call it a "Zombie", its a system that has been compromised and can reap havoc on your network. Can cause denial of service attacks, sends out email from your email account (spam and phishing emails), all kinds of stuff. The important part is that it creates enormous amounts of sessions from your machine.
    Just an idea

Maybe you are looking for