Symbol MC70 and phoneME
We are using Symbol MC70 (now supported by Motorola) device at our company. I'd like to ask if it's possible (or recommendable) to install phoneME platform (phoneme.dev.java.net) on this device? There aren't any simple instructions on how to install phoneME on mobile devices (at least I haven't found them yet), so I would also like to know how to install and configure the platform on on above-mentioned device. If anybody has any experience using Symbol devices I would be very grateful for any kind of help regarding this issue.
Thanks
Hi
I also have a Motorola MC70 PDA. I am facing problems related to the following things:
1. Can you please suggest where we can get the IDE and emulator. All I could get was for MIDP development and not CDC.
2. Do we need to install Creme?
3. Also could you suggest if AWT programming should be done or Swing? Which is appropriate?
Thanks
Similar Messages
-
Euclid Symbol Bold and Italic fonts not working in Indesign CS5
Hi I created some Maths Text books about 5 years ago in an older Adobe Indesign program. I now have to re-edit the files using Indesign CS5.
The Euclid Symbol Bold and Italic fonts i used back in 2005 now do not display in Indesign 5 when i open up the program. The other Euclid Symbol Fonts do. I think that they are all truefonts.
I have attached an example.
I am using a Mac running OSX 10.6.8.
http://www.dessci.com/en/support/mathtype/tsn/tsn109.htm <-- this is an error log from 'MathType' the guys who created the font - yet unsure what this actually means for me
Here is the example
fonts in the Euclid Family on my MacCongratulations on fixing the problem yourself! Hopefully our article (to which you linked) was of some help in that process. Let us know if you need anything else.
Bob Mathews
Design Science -
When I am in FireFox, and I mouse over any area that would normally allow me to do something, like select a tab, close a tab, or even fill text into this details box, a circular "block" symbol appears and prevents me from entering or doing anything. I have scanned all of the installed programs in the Control Panel and removed anything suspicious and reviewed addons and the like in FireFox, all to no avail. BTW, this problem does NOT occur while in Google Chrome, but I much prefer FireFox. Help!!!
Note that your System Details List shows multiple Flash plugins.
# Shockwave Flash 11.9 r900
# Shockwave Flash 11.8 r800
You can find the installation path of all plugins on the <b>about:plugins</b> page.
You can check the Flash player installation folder for multiple Flash player plugins and remove all (older) version(s) of the plugin (NPSWF32) and (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\ -
My macbook doesn't work. After pressing down the power button I hear the sound from starting the apple symbol appears and after a while a sign prohibited appears on the place of the apple symbol
Hi Kappy Thanks for your answer. I did a reboot on my Macbook as suggested and this operation is going on non stop for 14 hours and on the screen always appears the same message that you can see in the picture in attachment. Any ideas?
-
My apple stops its startup process in the apple symbol screen and keeps loading
My macbook has some startup problem as it keeps loading in the apple symbol screen and doesnt load to login screen. I have tried resetting PRAM and it produced no change. This problen occured when i logged out of guest account to reach admin account where i noticed the login page loading for a long time
See this Apple note on that boot issue.
-
Symbols: size and efficiency
I have an MC in an animation that is a circle with a radial
gradient, roughly 200 x 200 pixels. At a later point in the
timeline, I'd like to have many of those objects moving around, but
each then only at a size of 10 x 10. (The effect is that I have
zoomed back.)
Do I save anything, in terms of processing time while running
the .swf, by creating a new Symbol for the smaller versions? IOW,
each instance would not have to be scaled down, one at a time, if I
instantiate them from an already reduced-size Symbol.
(And thanks to all for current and past answers to my
questions here.)I don't want to customize them, I just want them to be a specific size and place to start with
right now they show up, either rolled up, in the upper left of my screen if I don't set the locationRelative parameter, or in the center of the screen, rolled up, if I set the locationRelative parameter -
Hi, ı have a problem once I push the power button and it starts to opening but small symbol turning and turning, it really lasts so long. could you please help me? is it so slow to open a mac pro.
OS X Version Number?
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836 -
Clustering, unix symbolic links, and war files
Hello,
we use symbolic links in our web application to a large shared storage device.
This works when running a single server, when the application is not a war file.
When we cluster the application, the admin server creates a war file, blindly
follows the symbolic links and tries to include all files in the shared storage
device. Bad!
Is there a work-around to this problem in a clustered configuration?
-Thanks-
hi,
can you tell me know you deploy your app to the cluster member
manually? do you run each member as an admin server? how do
you group them into a cluster then?
thanks,
yan
"Philippe Lantin" plantin_AT_cobaltgroup.com wrote:
>
>
>Yes, this method works. I did want to keep a central admin server to
>avoid have
>multiple configuration files, and deploy new code to only one location.
>I suppose
>I could do this via a shared drive.
>
>I have an open case with BEA on this issue. The root of the problem appears
>to
>be that the jar format isn't equipped to deal with symbolic links. Webapps
>which
>are exploded in directories lose their symbolic links when packaged in
>a war.
>
>Thanks,
>
>Philippe Lantin
>
>"Cameron Purdy" <[email protected]> wrote:
>>I've never used that centralized deployment feature; rather I've always
>>configured each of the cluster members manually, partly because of the
>>bug
>>in the admin server in 6.0 (?) that would not allow it to deploy to
>the
>>cluster.
>>
>>Can you try to deploy the application manually?
>>
>>Peace,
>>
>>--
>>Cameron Purdy
>>Tangosol Inc.
>><< Tangosol Server: How Weblogic applications are customized >>
>><< Download now from http://www.tangosol.com/download.jsp >>
>>
>>
>><Philippe Lantin plantin_AT_cobaltgroup.com> wrote in message
>>news:[email protected]...
>>>
>>>
>>> Hi,
>>>
>>> our web application is not a war when we use a single server. We simply
>>use a
>>> directory under "applications". This method works correctly with symbolic
>>links
>>> under weblogic v.6.1.
>>>
>>> To test our application in the cluster, we use the previous single
>>server
>>as the
>>> administration server, leaving the application directory intact. We
>>create
>>a cluster
>>> definition with it's target members using this web application.
>>>
>>> When we start up the cluster members, the administration server creates
>>a
>>war
>>> file that is distributed to to cluster members. This is not somthing
>>we
>>control,
>>> this is automatically done by weblogic.
>>>
>>> This is where we run into trouble. When the admin server creates the
>>war
>>file
>>> to distribute to the cluster target, it follows the symbolic links
>>and
>>recursively
>>> includes all files and directories. This creates a huge war file,
>and
>>is
>>obviously
>>> not the behavior we are looking for.
>>>
>>> Creating a war file manually doesn't help, since jar doesn't support
>>symbolic
>>> links.
>>>
>>> Thanks,
>>>
>>> Philippe Lantin
>>>
>>>
>>> "Cameron Purdy" <[email protected]> wrote:
>>> >I don't understand at which point you are running into a problem.
>>> >
>>> >> we use symbolic links in our web application to a large shared
>storage
>>> >device.
>>> >
>>> >That is not uncommon, for example to use a Sun storage box or EMC
>>with
>>> >some
>>> >fault tolerant characteristics to host the application images etc.
>>> >
>>> >> This works when running a single server, when the application is
>>not
>>> >a war
>>> >file.
>>> >
>>> >Do you mean when it is "exploded"? Does it work with a single server
>>> >when
>>> >the app is a war file?
>>> >
>>> >> When we cluster the application, the admin server creates a war
>>file,
>>> >blindly
>>> >> follows the symbolic links and tries to include all files in the
>>shared
>>> >storage
>>> >> device.
>>> >
>>> >This is the part that I don't follow. Are you using 6.1sp1? What
>are
>>> >the
>>> >steps that you are taking with the admin server?
>>> >
>>> >Peace,
>>> >
>>> >--
>>> >Cameron Purdy
>>> >Tangosol Inc.
>>> ><< Tangosol Server: How Weblogic applications are customized >>
>>> ><< Download now from http://www.tangosol.com/download.jsp >>
>>> >
>>> >
>>> ><Philippe Lantin plantin_AT_cobaltgroup.com> wrote in message
>>> >news:[email protected]...
>>> >>
>>> >>
>>> >> Hello,
>>> >>
>>> >> we use symbolic links in our web application to a large shared
>storage
>>> >device.
>>> >> This works when running a single server, when the application is
>>not
>>> >a war
>>> >file.
>>> >> When we cluster the application, the admin server creates a war
>>file,
>>> >blindly
>>> >> follows the symbolic links and tries to include all files in the
>>shared
>>> >storage
>>> >> device. Bad!
>>> >>
>>> >> Is there a work-around to this problem in a clustered configuration?
>>> >>
>>> >> -Thanks-
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>>
>>
>>
>
-
I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?
SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need." -
Where to find undefined symbol delay and drv_usectohz
Hello,
i use WS6U1 on Solaris 5.8 and i try to use the kernel function delay (example see "man delay").
I get 2 undefined symbols "delay" and "drv_usectohz", but i don't know which lib-file to include.
Can anybody help ?
kind regards
FrankHi,
From the man page of "delay " it appears that:
Kernel Functions for Drivers delay(9F)
NAME
delay - delay execution for a specified number of clock
ticks
SYNOPSIS
#include <sys/ddi.h>
void delay(clock_t ticks);
The above include should help you to find the symbols.
Hope path settings are set correctly. The header file "ddi.h" having these symbols is in /usr/include/sys. Can you reconfirm same at your end.
HTH.
Thanks,
Santosh -
My ipad2 cannot add events to calendars? There isn't a symbol "plus", and it doesn't response no matter how to tip it.
This may sound a little stupid, have you tried turning on iCloud and test your calendar again.
-
I cannot use my iPad.
It presents a black blank screen with just the circulating symbol in the middle.
I cannot turn if off or on to re-boot it as the on-off swith does not respond, neither does the press button on the bottom edge of the pad.
I have tried to connect it to iTunes but my computer (running Windows Vista) shows an error message 0xE8ooooo65.
Previous to this complete shut-down I had successfully connected to iTunes and tried to download the new 4.3.3 (?) Update.
This showed it would take four hours ! So it was left to do just that.
However it then went back after thfour hours it said it was backing up my files, but then shutdown.
Can anyone help?
Shirleyhttp://support.apple.com/kb/TS3281
-
A random variety of my songs are grayed out so they won't play and it shows the ICloud download symbol next to them. In the top left hand corner, it shows the cloud symbol with horizontal lines moving, as if it's in the process of downloading, but it has been on all day and there is no movement to shift the grayed out songs to functioning songs as if they have been downloaded.
Does anyone have any suggestions??
Thanks!!Delete the incomplete tracks from your library, sending them to recycle bin, then download them again from your purchased history. If the problem persists use the "report a problem" links from your account history to contact the iTunes store support staff.
Are the incomplete tracks ones that you had previewed before purchasing the album? If so there may be a bug that needs reporting. See this recent post which explains why I ask the question...
tt2 -
What is this Symbol called and what does it mean?
What is this symbol/icon called and what does it mean? It goes away with it's "notification" and I would have no idea where to find it should I need to.
Please. And thank you.It did come from Apple as I had to deal with this. But in speaking with another "Genius" I was trying to describe the symbol to him and never got an answer.
-
My older iPod classic says when I dock it either with charger or hooked up to computer that the battery is low, the apple symbol appears, you can hear a whirring sound (hard drive coming on) then a clicking sound and then back to low battery message. Has been doing this for the last week.
Hey there Kevin,
It sounds like your iPod Classic is exhibiting some unexpected behaviour when you have it connected to your computer with the usb cable. I suggest the troubleshooting steps in the following article to help troubleshoot the device:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Start by resetting the iPod, then retesting the issue.
Reset
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip:
If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
Thank you for using Apple Support Communities.
All the very best,
Sterling
Maybe you are looking for
-
Folder and Album names onto CD
Please bear with me. I did this before and now I can't figure out how. Such are the ravages of aging brains. I'm trying to copy the music from my old vinyls to CDs I can play in my car. I have software and a USB connection that let me get the musi
-
Who can help me, to add my Ipad to Deviecs in Find My Phone. I was usually using my Ipad sign in iTunes for download music, but haven't signed in iCloud yet. Now my I Ipad stolen, how can I use Find My Phone?
-
Line item diplay in Profit Center
Hi Friends, I am working on ECC 6.0 version, when checked display document then profit center can be seen. In the report S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance can be seen Profit Center wise data. Where as when I run t-code KE5Z t
-
Office Documents and framset issues
I use CS3 on a pretty large school website (mac osx 10.5 users) that, unfortunately, uses frames. If you click on an Office doc link nothing happens at all. If you open the body frame in its own window and THEN click on the word doc link (or browse d
-
Does anyone know where i can get a tree like help document template
Hi, I am creating an email client and want a help index like a tree structure as you would find in netbeans for example. Does anyone know where i can find such a template. thanks.