Symbol pins do not match my subcircuit's I/O pins

I am having an issue where the pin names of my subcircuit symbol do not correspond to the name of the pin in my subcircuit.
I've attached an image of the problem I am seeing.
The pin I/Os are something I'd expect to work right out of the package. Perhaps I am not doing something correctly? I tried to update with the Tools->Update HB/SC Symbols but it didn't change.
I am evaluating this software and am hoping to switch to it because the current system we are using has lots of bugs. I am using Proteus for my work right now, but I am hitting limitations with it, and was hoping to moving to a more professional package would mean better software stability. I am just running into bugs like this here and there which is making me a little unsure about my decision to change our EDA package.
Also, how long is it before these issues would be resolved by NI? With Proteus they usually release an update every few weeks to resolve issues.
Any suggestions/updates?
Attachments:
pins_dont_match.jpg ‏72 KB

Hi yes I should have posted this earlier. Please let me know if there are some easy ways to correct this. FYI this was originally created with 10.0 but I just got 10.0.1. The still seems to be messed up in 10.0.1 so maybe I did something wrong to cause this to happen?
One of the things I did was copy and paste the connectors rather than placing new ones.
Also I am having a problem with copy-pasteing a vcc line. I have a vcc net labeled v3 that is 3.3 volts (confusing right? multisim won't let me lable it v3.3)  but when i copy paste it, it auto renames to vcc @ 5v. Why is this? maybe I need a new thread for this seperate problem?
One more quick question. When I redownloaded 10.0.1 it keeps bugged me again about activate or evaluate. I am using an eval version, but I am wondering if every patch, will I need to activate? And what is the policy regarding updates? If I want to run on a desktop and laptop can I use one licence and activate on both? Does running in eval mode limit the program?
I remember a problem I had with Discreet (now Autodesk) where 3dsmax would not activate, and I had to wait over a extended holiday period to get techenical support. What was problematic was that since I had already been using the product prior to that (activated), I no longer had the chance to run it in evaluation mode (aparently their 30 day mode ticks away even after the program has been activated), so I could not use the program. They have since corrected the problem via a fairly comprehensive auto activation online with support 24/7 but I am wondering if NI's package may suffer from the same issues.
Thanks for the info.
Message Edited by Kerms on 12-11-2007 12:28 PM
Attachments:
sc_pinio_bug.ms10 ‏99 KB

Similar Messages

  • Subcircuit pins do not align with grid and will not connect

    I have two identical subcircuit symbols.  One is just fine, but the other has pins that do not align with the MS grid, and one that will not even connect.  MS12.0.0.
    This one is fine:
    This one pins are off grid.  The circled one will not connect.
    Solved!
    Go to Solution.

    Hi,
    I have been experimenting a bit with this. One thing you can try is open the Symbol Editor, select the pin which is not connecting and then from the spreadsheet view, change the Shape to Zero-length Pin. Then try to see if you can connect the pin in the design. It will not appear as a line but you should still be able to connect to it.
    If this does not work, you can open a service request and we can try to see how to resolve the issue.
    Hope this helps.
    Regards,
    Tayyab R,
    National Instruments.

  • PIN number of Q10 does not match with the sticker (Q10 verizon)

    Hi, i bought a blackberry q10 verizon from your company and found that the PIN in the About is not matching with the PIN at the back of the battery. Can you please advise why so? Have I bought a fake phone?
    Thanks
    Hai
    Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use
     

    Hi and Welcome to the Community!
    First, this is a user-to-user community, not a user-to/from-BB channel for any formal communications. So, we can't tell you anything about your purchase result. Please contact the actual place of purchase for assistance with this matter...from what you describe, it could be as simple as a labeling error or as complex as a fake device...but, at an internet distance, we have no way to know. You need your official support channel, which is via your actual original place of purchase.
    Good luck!

  • Need to reset Airport Extreme password, but the instructions provided by Apple and the support community do not match with what I get in my computer.

    I have followed the directions given on the Apple support pages and the ones provided in this community, but they do not match with what I get from the Airport Utility. According to the dorections, after starting a soft restart on the Airport Extreme, I should select the network from the menu bar item (which I suppose is the symbol for wi fi). Then it says to open the Airport Utility and select the Airport Base Station, ok up to now. But the instructions say that after selecting the base station to "click Continue". In my Airport Utility, which is the latest version, there is no Contimue. When I select the Base Station I get a bubble with information on the base and an "Edit" button. By clicking on this button, I am able to get a new window with info on the Base, inlcuding password, but I never get the window which says that the device has been reset. I need help, as I have bought a second Apple computer and need the password to set the wifi preferences, and I forgot the password for the Airport Extreme.

    You're doing everything right. The problem is that the Apple Knowledge Base article is outdated and the screenshots do not correspond to the new version of AirPort Utility.
    If all you need to do is find the password for the Extreme, you can do that by following this procedure. Use the Mac that is already configured to connect to your Extreme's network.
    You can retrieve your existing wireless network password from a Mac you normally use on that network. Your wireless network password is stored in your Mac's Keychain.
    You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
    On that Mac, open the Utilities folder. Find Keychain Access and launch it.
    In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
    Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
    If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
    Double-click that, and in the window that appears check the box for "Show password".
    You will get the following window:
    In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
    Then, click Allow, and your wireless network password will appear in the "Show password" field:
    Make note of it.
    Close the window, then quit Keychain Access.

  • PI 2.0 - virtual express "setup" Fail - The passwords do not match:

    Hi all,
    Since my lab is mostly VM, I was going to upgrade my PI 1.3 to 2.0.  Cisco documentation says the inline upgrade is not supported for the small virtual appliance.  Anyhow, I deployed the new 2.0 Express virtual OVA file, allowing to to use all needed resources.
    To get to the point, when I run through the initial setup/bootstrap, I cannot get past the setting of the admin user's password.  Regardless of what I type, I always get the same message "The passwords do not match".  I can simply type the letter 'a' for a password attempt and am told they do not match.  Only when leaving it blank for the password do I see a message showing a 6 character minimum.  I can type abc123 or whatever basic combination, advanced combination, cases, symbols, numbers, etc.  No matter what I do I cannot make the passwords "match"!
    I have blown away the VM and re-deployed, validating checksum on OVA downloaded, PI-VA-2.0.0.0.294-Express.ova.
    I cannot get past this step.  Has anyone else experienced this or have any input?  I'm not finding anything in my searches.
    Thanks!

    So I was not correct in what fixed my issue.
    So, when I rebooted the host (which contains my MS 2008 DC as well), I had to access my vSphere from my local windows machine client (VM running on Oracle VBox on my MBAIR) through my VPN to my lab. 
    When typing the password Combos from my local Windows VM, I could get past this step.
    When it was time to type the ftpuser/web user (after I performed the initial setup), I again accessed through the vSphere Client loaded on the 2008 DC Virtual Machine running on the same host as the Prime 2.0 Install - same VLAN/etc.  I access this via RDP, then launch vSphere from that DC.
    From that client I was again getting the Passwords not matching.  Only when launching vSphere Client locally (from my local MB AIR VM) was I able to get the passwords to work.
    Bottom line, it seems when accessing vSphere client through an RDP session, using the console feature of vSphere client provided mixed/undesirable results.  When I access console from a vSphere client (non-RDP) it was working fine.
    Just figured I would let you know what seems to be the trigger.
    Thanks Scott!

  • Unable to set PIN - Error: "PIN must not be the same as the user's phone number"

    We are in an ongoing Lync Server 2013 deployment and have elected to set default conference PIN numbers for anyone that doesn't have them currently set.  We decided to make the default PIN the same as the person's telephone extension.  I realize
    this is not a secure PIN setting, but please bear with me.
    When I use PowerShell to loop through the people that do not have a PIN set and attempt to set the PIN to their five-digit extension, PowerShell returns the following exception:
    Set-CsClientPin : PIN must not be the same as the user's phone number (Error "18005").
    At line:1 char:1
    + Set-CsClientPin -Identity GenericUser -Pin '13579'
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin], ArgumentException
    + FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Microsoft.Rtc.Management.UserPinService.SetOc
    sUserPinCmdlet
    I know what you are thinking:  by default, Lync has the AllowCommonPatterns setting set to $false on the Global (default) PIN policy.  But I have created another PIN policy called "Low-restriction PIN Policy" that has this setting set
    to $true and assigned this new policy to the users I am trying to set the PIN on.
    According to
    Microsoft's documentation on the Set-CsClientPin cmdlet, the description for AllowCommonPatterns is as follows:
    "Indicates whether or not "common patterns" are allowed in PINs.
    Common patterns include repeating digits (225577); 4 or more consecutive digits (991234); and
    PINs that match a user's phone number or extension number.
    If set to True common patterns (such as the PIN 123456, which includes consecutive digits)
    are allowed; if set to False common patterns are not allowed. The default value is False."
    Given this information, I do not understand why Lync Server 2013 is preventing me from setting a default PIN that matches their extension number when AllowCommonPatterns is set to $true on the PIN policy assigned to the user.
    Any ideas on what might be wrong?
    PS C:\Users\user> Get-CsUser GenericUser | Select-Object PinPolicy
    PinPolicy
    Low-Restriction PIN Policy
    PS C:\Users\user> Get-CsPinPolicy -Identity 'Low-Restriction PIN Policy'
    Identity : Tag:Low-Restriction PIN Policy
    Description : [20150224 SWS] Standard PIN policy.
    MinPasswordLength : 5
    PINHistoryCount : 0
    AllowCommonPatterns : True
    PINLifetime : 0
    MaximumLogonAttempts :
    PS C:\Users\user> Set-CsClientPin -Identity GenericUser -Pin '13579'
    Set-CsClientPin : PIN must not be the same as the user's phone number (Error "18005").
    At line:1 char:1
    + Set-CsClientPin -Identity GenericUser -Pin '13579'
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin], ArgumentException
    + FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Microsoft.Rtc.Management.UserPinService.SetOc
    sUserPinCmdlet

    I just checked the management store replication status and it replicated.  I tried to set the PIN again and got the same error.  Here are my results:
    C:\Users\user> Get-CsUser GenericUser | Select-Object PinPolicy
    PinPolicy
    Low-Restriction PIN Policy
    C:\Users\user> Get-CsPinPolicy -Identity 'Low-Restriction PIN Policy' | Select-O
    bject AllowCommonPatterns
    AllowCommonPatterns
    True
    C:\Users\user> Set-CsClientPin -Identity GenericUser -Pin 13579
    Set-CsClientPin : PIN must not be the same as the user's phone number (Error
    "18005").
    At line:1 char:1
    + Set-CsClientPin -Identity GenericUser -Pin 13579
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (13579:String) [Set-CsClientPin
    ], ArgumentException
    + FullyQualifiedErrorId : UserPin::SetPin::PinDoesNotMeetConstraints,Micro
    soft.Rtc.Management.UserPinService.SetOcsUserPinCmdlet
    C:\Users\user> Get-CsManagementStoreReplicationStatus
    UpToDate : True
    ReplicaFqdn : edge.domain.com
    LastStatusReport : 3/3/2015 9:20:21 PM
    LastUpdateCreation : 3/3/2015 9:20:18 PM
    ProductVersion : 5.0.8308.556
    UpToDate : True
    ReplicaFqdn : frontend.domain.com
    LastStatusReport : 3/3/2015 9:20:21 PM
    LastUpdateCreation : 3/3/2015 9:20:18 PM
    ProductVersion : 5.0.8308.556

  • SSIS OLE DB Data Source: literal does not match format string

    Dear All,
    this is my first post on this forum, so sorry if I choose wrong category for this question, but I stuck...
    I'm using SSIS from SQL Server 2k8 R2 in Windows Server 2k8 R2. I have installed Oracle Client 10.2.0.2 32 bits and Oracle Client 10.2.0.4 64bits. I want to connect to Oracle 8i and Oracle 9i by these clients.
    Unfortunately when I want to see a preview, only error occurs to me:
    ORA-01861: literal does not match format string (OraOLEDB)
    I have read a lot about this issue but nothing helps me (to_date, cast, convert etc.).
    This is query which I use:
    SELECT COMPANYID, TRANSACTIONTYPE, TRANSACTIONDATE,
    PRODUCT, PRODUCTIONSITE, BATCHNUMBER,
    BINNUMBER, QUANTITYSTOCKUNIT, QUANTITY,
    UNITOFMEASURE, TRANSACTIONCURRENCYID, COST
    FROM APPS.DW_PRODUCTION
    WHERE TRANSACTIONDATE >= '20050101'
    AND TRANSACTIONDATE < '99991231'I have investigated that the problem is with TRANSACTIONDATE column (which is VARCHAR2 data type in database).
    I want also inform You that the same query in SSIS 2005 on Windows 2005 64 bits worked fine.
    Could You help me to find a solution?
    Thanks in advance,
    Łukasz - chalunster
    PS. Sorry for my english
    Edited by: BluShadow on 16-May-2011 15:15
    put {noformat}{noformat} tags into the message and encoded the < symbol so that it formats correctly.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    user10450810 wrote:
    Dear All,
    this is my first post on this forum, so sorry if I choose wrong category for this question, but I stuck...
    I'm using SSIS from SQL Server 2k8 R2 in Windows Server 2k8 R2. I have installed Oracle Client 10.2.0.2 32 bits and Oracle Client 10.2.0.4 64bits. I want to connect to Oracle 8i and Oracle 9i by these clients.
    Unfortunately when I want to see a preview, only error occurs to me:
    ORA-01861: literal does not match format string (OraOLEDB)
    I have read a lot about this issue but nothing helps me (to_date, cast, convert etc.).
    This is query which I use:
    SELECT COMPANYID, TRANSACTIONTYPE, TRANSACTIONDATE,
    PRODUCT, PRODUCTIONSITE, BATCHNUMBER,
    BINNUMBER, QUANTITYSTOCKUNIT, QUANTITY,
    UNITOFMEASURE, TRANSACTIONCURRENCYID, COST
    FROM APPS.DW_PRODUCTION
    WHERE TRANSACTIONDATE >= '20050101'
    AND TRANSACTIONDATE < '99991231'
    I have investigated that the problem is with TRANSACTIONDATE column (which is VARCHAR2 data type in database).
    I want also inform You that the same query in SSIS 2005 on Windows 2005 64 bits worked fine.
    Could You help me to find a solution?
    Thanks in advance,
    Łukasz - chalunster
    PS. Sorry for my englishHi
    Welcome to OTN Forums!
    Are you sure you are using following code
    SELECT COMPANYID, TRANSACTIONTYPE, TRANSACTIONDATE,
    PRODUCT, PRODUCTIONSITE, BATCHNUMBER,
    BINNUMBER, QUANTITYSTOCKUNIT, QUANTITY,
    UNITOFMEASURE, TRANSACTIONCURRENCYID, COST
    FROM APPS.DW_PRODUCTION
    WHERE TRANSACTIONDATE >= '20050101'
    AND TRANSACTIONDATE < 'If yes, then youistake is there,
    WHERE TRANSACTIONDATE >= '20050101'
    AND TRANSACTIONDATE < 'your script is not ended you can use this
    WHERE TRANSACTIONDATE >= '20050101'
    AND TRANSACTIONDATE < '20110101'or
    WHERE to_date(TRANSACTIONDATE,'YYYYMMDD')  >= to_date('20050101','YYYYMMDD')
    AND to_date(TRANSACTIONDATE,'YYYYMMDD') < to_date('20110101','YYYYMMDD')Edited by: Mahir M. Quluzade on May 16, 2011 6:59 PM

  • The version of SOS does not match the version of CLR you are debugging.

    I have a 32 bit crash dump file that I have loaded with WinDbg X86 (I'm running on Win7 63 bit).
    When I open the crash dump file I do the following:
    .loadby sos clr
    then when I try to run any other command I get the following error:
    The version of SOS does not match the version of CLR you are debugging.  Please
    load the matching version of SOS for the version of CLR you are debugging.
    CLR Version: 4.0.30319.269
    SOS Version: 4.0.30319.296
    How do I load another version of the SOS dll? and
    How do I find out what version of SOS I need to load?
    Thanks

    I see that there is another version of sos.dll located in:
    C:\Windows\Microsoft.NET\Framework\v2.0.50727.
    So I have tried to add this path in File-->Symbol File Path like so:
    srv*c:\symcache*http://msdl.microsoft.com/download/symbols;C:\Windows\Microsoft.NET\Framework\v2.0.50727
    It doesnt seem to make any difference.
    When I type !chain I dont see this path output.

  • Error : the class does not match the class of the persisted object

    Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. How to resolve this Exception? I nead to Deserialize this stream...

    ArulPrabhu wrote:
    Friend... I agree with u... Every thing Ok... I am not having the option to make change on the server side... I call a webrequest for the URI - "http://www.nseindia.com/chartdata?mkttype=N&series=EQ&symbol=RPOWER&charttype=ONLINE_STOCK".. From that i got response as Serialized Object Stream... Which is the data made available to all through their applet "Chart".. But i need it for my Custom Project.. I know the Structure of class they have serialized... Is their any chance to parce Data from that Stream..
    Three words.
    You are doomed.
    Whatever you end up doing will not be serialization. It will be reverse engineering of a old (dead) format that could go all pear shaped on you when you least expect it. One of the worst problems in using a solution where you reverse engineer, try and guess hackery your way through a proprietary semi (or totally) undocumented format is that it is really impossible to test your code with any degree of certainty. Does your code actually work? Or does it only work because you haven't seen some totally unexpected (but legal for the format) format yet?
    Get the producer to produce XML instead of "serialized" data. This is a much better route for you to go down.
    If you decide to keep on your path then grab a DataInputStream and go somewhere else because you'll have to figure out the format of another languages serialized data on a place that isn't this site.

  • Selction of US or US Extended Keyboard Input Source does not match my US keyboard

    Before upgrade from Maverick to Yosemite my US key board matched the diagram shown in Input Sources in Key Board Viewer.  Now it has symbols in different locations that do not match my keyboard.

    Check System Preferences/Keyboard/Input Sources to make sure that is set correctly. If so, would you post a screen shot so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon or you can drag the screen shot into a reply. Copy and paste doesn't work.
    Screen shots

  • Error code attributes do not match

    when trying to install SQL Server 2008, on Feature Selection screen, I am getting an error message: Attributes do not match.  Preset attributes (Directory, Compressed), including attributes (0), excluded attributes (Archive, Compressed, Encrypted).  What do I do to proceed with the instal?
    The next step is instance configuration.

    Hi, 
    I did not try it but i pretty sure that you can install SQL Server on compressed disk/folder using symbolic link as I did with "Shrink SQL Database During Restore":  http://social.technet.microsoft.com/wiki/contents/articles/18481.shrink-sql-database-during-restore.aspx
    * DON'T DO IT On PRODUCTION!!!
    I am just talking on theoretical issue :-)
    [Personal Site] [Blog] [Facebook]

  • Email sender not matching address book

    I have just noticed a change in my ipad 4th generation and iphone 5 running ios6.1. I uses to have have the email sender appear as entered in my address book for notificationson my home screen, inbox list, sent items and so forth. Also after openning the email it matches in the from section at the top. Now something has changed. The sender now only matches when i open the email in the from section at the top. But now notifications on my lock screen and in my innbox list show a different name that the sender used to sign up for their email. The sender is my mom. My dad set up her email using his name. For months it has been matching just fine but now why the change? It is strange because now the label mom only shows in the sent item list but not in the inbox list Now when i receive an email from my mom in notifications and inbox list it shows my dads name and only when i open the email does the from box change to mom. I have my mom listed as family in my contact card. I have the nickname added as mom and as well as only mom in the first name field. I don't know what has changed in my devices to make this happen. Strangly enough i have an old iphone 4s running ios7 and it still works with no problem. It lists mom in all areas. Inbox list, sent items list, notifications on lockscreen and so on. Because my ipad and iphone 5 are still under warranty i called apple and was told to reset all settings but that has not solved my problem. Anyone know how to fix this. Other threads with this issue offer no help but i believe were not communicated properly to the support members so I thought i would try.

    There could be any one of three solutions... Try these:
    1. Make sure you set your own country code at Phone dialer Screen > Options > Smart dialing.
    Set your Country Code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
    * In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
    2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
    * For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
    3. You may have "Content Protection" set on your Address Book.
    Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Firewall password not matching

    When starting my Mac, I get a message saying Firewall password does not match; enter old password. I enter the password I have always used and then get to the login screen. It appears every time I log on, and started after an OS X update. It is the same password since I got the Mac, and I am not sure why it now says it does not match now.
    Any advice would be appreciated.

    Thanks Sanders
    I actually use some symbols along with the letters.
    after the fifth attempt I clearly saw the password letters and symbols I used.
    The only thing I can remember just after the update was that it was trying to acivate the radio ... it seemed to be stuck here even though it said that the update wa complere.
    Poosje

  • ITunes U raw reports - storefronts do not match real geo location

    Hello,
    in iTunes U raw reports the storefronts do not match real geo location.
    I've made some tests choosing different country stores in iTunes client instead of the real one where I'm geographically located.
    Then I preview and download some episodes taking note of my IP (WAN), date and time, actions, client used, episode titles ; then looking in the raw  report for that IP address( I suppose the last two fields are X.X for a privacy reason) , time, actions, client used and episode titles, as expected I've found the storefront I've selected instead of my real geo location.
    This is a correct behavior of the new reporting system, but the problem is that I found in my reports unexpected activities for some countries probably because users choose a different or incorrect iTunes contry store and that could make the reports unreliable if looking for the countries that follow our iTunes U site.
    It would be nice to have the real geographical  location; we are an international scientific and no profit organization, and our mission is to transfer knowledge, and for that reason we would understand which countries follow us.
      Regards,
        Diego

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

    Hi,
    I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
    When i try to enroll a permanent smart card for a user, its shows me the following error:-
    The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
    Also there is no logging done for the particular event.
    I am able to change my smart card pin and view my smart card info. through the FIM CM client. 
    Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
    Thanks

    Hi,
    Sorry for the delay in reply.
    Please try the following steps first:
    Open Powershell as Administrator
    Go to Start--> Run and type wbemtest.exe.
    •Click Connect. 
    •In the namespace text box type "root" (without quotes).
    •Click Connect.
    •Click Enum Instances…
    •In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
    •In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
    •In the Object Editor window, double-click HandlesPerHost.
    •In the Value dialog, type in 8192
    •Click Save Property.
    •Click Save Object.
    Under properties find the property "MemoryPerHost" or any other ones you need to modify  and double click it
    Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
    Click Save Property
    Click Save Object.
    •Close Wbemtest.
    •Restart the computer.
    And if all nodes are Windows server 2012, install the following update rollup as well:
    Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
    http://support.microsoft.com/KB/2862768
    If you have any feedback on our support, please send to [email protected]

Maybe you are looking for