Symbolic Link doesn't work in 'File Window' on Mac

Hi, I'm Nao from Japan.
I'm sorry for my strange English.
I usually use Dreamweaver CC on Windows7 PC.
I manage some web sites. Three of them belong to same group. They require some same image files. The three sites are on one remote web server. So I use symbolic link(directory) to share the image files.
And on my windows PC, I use symbolic link to share the files in the local sites of the three.
'File Window' of dreamweaver CC (for Win) understands symbolic link and i have no trouble.
But 'File Window' of dreamweaver CC (for Mac) can't understand symbolic link.
('Preview Window' understand symbolic link.)
How can i solve the issue?

Thank you for your reply.
I should explain my situation again.
at command prompt on windows7,
c:\webSites>mkdir site_A
c:\webSites>mkdir site_B
c:\webSites>mkdir site_A\shared_images
c:\webSites>mklink /d site_B\shared_images c:\webSites\site_A\shared_images\
'c:\webSites\site_B\shared_images\' acts right on File Window of Dreamweaver CC.
If some files are put into the 'c:\webSites\site_A\shared_images\' ,they will appear in 'c:\webSites\site_B\shared_images\' on File Window of Dreamweaver CC.
but at terminal on Mac OSX,
MacBookPro:webSites nao$ mkdir site_A
MacBookPro:webSites nao$ mkdir site_B
MacBookPro:webSites nao$ mkdir site_A/shared_images
MacBookPro:webSites nao$ ln -s /(somewhere)/webSites/site_A/shared_images/ site_B/shared_images
'/(somewhere)/webSites/site_B/shared_images/' doesn't act right on File Window of Dreamweaver CC.
But '/(somewhere)/webSites/site_B/shared_images/' acts right on 'Finder'.
And in the 'Design view', the images located in '/(somewhere)/webSites/site_B/shared_images/' are displayed right.
I am at a loss.

Similar Messages

  • WRT54GL Need the TFTP EXE link or file please, FTP link doesn't work 550 error.

    Bricked the router, bad flash. Power LED is flashing.
    Need the TFTP excutable please, FTP link doesn't work. 
    Thanks.

    Try this link to unbrick the Linksys Router.Download 44.3 KB the TFTP utility.
    Message Edited by Wizzard on 10-07-2009 09:38 AM

  • What can I do if my CD or DVD drive doesn't work properly in Windows 8?

    QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
    AnswerNote: For help with this issue in Windows 7, please see this article.
    To get your CD or DVD drive working correctly, try these suggestions in the order listed.
    Reinstall the Driver
    Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
    Power Cycle
    Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
    Ensure the laptop is turned off.
    Unplug the laptop's AC power cable.
    Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
    Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
    Hold down the power button for thirty seconds.
    Reattach the battery if removed.
    Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
    Connect the other end of the AC adaptor to your computer.
    Start the computer and test the drive
    Microsoft Fix-it
    Your computer may exhibit one or more of the following symptoms:
    Your CD or DVD drive no longer appears in Windows
    Your CD or DVD drive does not read or write and is shown as disabled
    The media in your CD or DVD drive cannot be read
    The media cannot be written to a CD or DVD inserted into the drive
    You receive an error message about your CD or DVD drive
    If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
    System Restore
    Try using System Restore to restore to the most restore point from before the problem arose.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    System Recovery
    If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
    For more information on performing a recovery, see the following article:
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    Contact Customer Support
    If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

    See this Microsoft article - http://support.microsoft.com/kb/314060/en-us  For ways to fix manually
    and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
    (these are from the Microsoft article)
    Resolution 2: Use the CD/DVD Fix it troubleshooter
    To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8   
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    Windows 7, Windows Vista and Windows XP
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    If your problem is not solved, try the next
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • How to I set an internal link in a PDF document using Preview?  After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided.

    How to I set an internal link in a PDF document using Preview?  After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.

    No.  I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.

  • Personalize link doesn´t work

    Hi Everybody,
    I´m getting an access denied error when I click on the Personalize link in the portal masthead iview. This is what I did:
    1) I copied the eu_core_role.
    2) I copied the personalize workset.
    3) I deleted the home content in the new eu_core_role.
    4) I assigned the new personalize workset to the new eu_core_role as a delta link.
    5) I assigned the new eu_core_role to users and user groups.
    6) I checked the end user permissions for these users and user groups.
    After these steps, the link doesn´t work.
    We´re on Netweaver Portal SP14.
    I tested the Personalize link with the portal URL fully qualified (DNS) and not fully qualified (just hostname).
    Can somebody help me?
    Thank You very much for Your help.
    Regards.
    SS.

    Hi again,
    Another question:
    After I assigned the new eu_core_role to users and user groups, the tool area search doesn´t work. It shows an access denied error, too. This error seams to be related to changes on eu_role, isn´t it?
    The tool area search and the Personalize link only work with administrators (users with admin roles).
    I´ll appreciate Your help.
    Regards.
    SS.

  • JDeveloper 10.1.3.4 download link doesn't work.

    Have anyone downloaded new version of JDeveloper (10.1.3.4) ? Download link doesn't work for me.
    http://www.oracle.com/technology/software/products/jdev/htdocs/soft10134.html
    Kuba

    I also have the same issue.
    Looks like they are working on it, this message is on the top level Downloads page:
    Important Note: As of 2:30pm PT Sept. 18, OTN software downloads are currently unavailable. We apologize for any inconvenience and are working to restore them as quickly as we can.

  • Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

    Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

    Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

  • You can't open Mail, Contacts & Calendars preferences because it doesn't work on an Intel-based Mac.

    I updated my Mac to Mavericks and after that, I can't open the Mail, Contacts and Calendar preferences.
    Every time I try, I get the following message:
    "You can’t open Mail, Contacts & Calendars preferences because it doesn’t work on an Intel-based Mac."
    I tried this workaround from the Mountain Lion thread (https://discussions.apple.com/message/21303574#21303574) but it didn't worked.
    Further I deleted all files in the Library Preferences folder, but it didn't helped also.
    Can anyone help me please?

    Hi Michael,
    I had the same problem. And I found a fix.
    I noticed that on a different system running Mavericks without any problems, the preference pane isn't called 'Mail, Contacts & Calendars' anymore, it's now called 'Internet accounts'. The fact that it's still called by the old name on your system, means it somehow wasn't replaced while updating to Mavericks.
    So the cure is pretty easy:
    On a different Mavericks system, go to /System/Library/PreferencePanes/ and copy the file InternetAccounts.prefPane. Take it to the system you're trying to fix, and paste the prefPane file in the same directory. Reboot, and it should all work fine. At least it did in my case.
    Cheers
    Niels

  • How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
    With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

  • Preference panes - cannot open because it doesn't work on an intel-based mac.

    Just updated to Mavericks and was checking out "System Preferences". Of the 37 items I have here 19 will not open. The error messages I get are alternately:
    "Could not load <....> preference pane"
    "You can’t open <....> preferences because it doesn’t work on an Intel-based Mac."
    (<....> = name of preference pane)
    Clicking on a pane will give one message, then, once "OK" has been clicked, clicking again on the same pane will give the second. There does not seem to be any correlation between when a particular message will occur, but it is always the same panes with the issue.
    Ths was initially a upgrade install over the latest Mtn Lion, but I've just completed a repair and restore on the os with a fresh download, with no change.
    I am running a mid-2009 macbook pro.
    If anyone knows what is going on here and could suggest a solution ...!
    Panes with the issue:
    Security & Privacy; Notifications; Printers & Scanners; iCloud; Internet Accounts; Network; Sharing; Users & Groups; Parental Controls; Date & Time; Dictation & Speech; Time Machine; Accessibility; Startup Disk; an

    I had the same issue after restoring a cloned drive with Mavericks.
    Repairing permissions didn't help.
    Show invisible files and go to /Applications - you will see a bunch of corrupt application starting with .0
    For example i had
    .0Messages
    .0System Preferences
    .0Time machine
    The wrong System Preferences was getting launched when calling it from the menu - the corrupt one.
    I deleted them and all is good.
    Also if this doesn't work, select Applications/System preferences and call Get Info from the File menu and make sure 32 bit mode is not activated.

  • You can't open Sharing preferences because it doesn't work on an Intel-based Mac.

    I Am Running Lion And When I Open My Sharing Preferences This Error Comes Up: You can’t open Sharing preferences because it doesn’t work on an Intel-based Mac.
    If It HElps I Just Downloaded Apple Remote Desktop Client 210 And I Am Running OSX Lion And Have An I5 Core

    /system/library/preferencepanes/SharingPref.prefPane
    Is the location of the file with the problem. 
    Do you have your install dvd? or do you have a time machine backup?

  • You can't open Dictation & Speech preferences because it doesn't work on an Intel-based Mac.

    I cannot open or use Dictation & Speech in System Preferences. When I try to open it I get the error:
    "You can’t open Dictation & Speech preferences because it doesn’t work on an Intel-based Mac."
    I have tried repairing the disk from the installation CD and repairing the permissions and I have also tried re-installing Mountain Lion but the feature still does not work. Any ideas?

    Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.systempreferences.plist. If you can't open, do a backup, format and install

  • HD Audio is not working in bootcamp windows in mac mini 2012

    HD Audio is not working in bootcamp windows in mac mini 2012

    Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
    >>Clear CMOS<<
    Afterwards update the Intel Management Engine Driver in Windows.
    Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

  • CSV link doesn't work with popup created using window.showModalDialog

    From a data maintenance page, I allow users to view an audit trail of changes in a window which pops up using the window.showModalDialog method.
    In the popup page I have a download to CSV file link. When the link is clicked nothing happens.
    If I change the method to window.open the CSV link works fine.
    Any ideas?

    Thank you so much for your suggestions.
    I selected Convert RoboHelp Edited topics to HTML in both projects and recompiled them.
    I tested with Firefox 3.6 and 5.0.1 with the same maddening result: None of the linked topics popped up. Text pop-ups and See Also links continue to work. Everything works in Internet Explorer.
    The errors continue to be the same ones: "Permission dennied to access property 'whname'" and "Permission denied to access property 'document'".
    My next step is to test it from a server, but that, of course, requires others to assist.
    Have you heard of such a problem before? Do you have any other suggestions?

  • Orange arrow link doesn't work in Sales Order details window, Win2003 only

    Here is a weird one, I did some searching around and I couldn't see that anyone had asked about anything like this before.
    In Windows Server 2003 when our add-on is running the orange arrow linking back to the Customer window from the Sales Order window does not work.  If you click it, nothing happens.
    <br><br>
    <img src="http://6stringsamurai.brinkster.net/sapproblem.gif">
    <br><br>
    It's odd, it works on every other version of Windows.  I didn't even think our code could change that.
    Any ideas?  Thanks!

    My machine where this is being tested is using Service Pack 1 Patch Level 12.  The customer is running Patch 11.  I was able to recreate the problem on our machine using the SAP sample OEC Computers database.
    Our add-on does not add any functionality to the Sales Order Window, I traced through some things this morning and I found that we do capture events from the Sales Order Window but clicking the orange arrow does not trigger any actual functionality
    It checks out what form the event is from:
    If (pVal.FormType = SAP_DELIVERY_FORM) Or _
           (pVal.FormType = SAP_QUOTATION_FORM) Or _
           (pVal.FormType = SAP_ORDER_FORM) Then
    Then it checks the event against some conditions, all of which are false.
    Like these ones and a few others
    If m_oForm.Type = SAP_DELIVERY_FORM And pVal.ItemUID = BTN_AUTOPACK And pVal.EventType = et_CLICK And pVal.Before_Action = False Then
       ' Do some stuff
    If (pVal.EventType = et_FORM_LOAD) And (pVal.Before_Action = False) Then
       '  Do some stuff
    All of those statements are false in this case, they relate to other forms and general things to do when forms load and close.
    I've traced this on a machine where the link works and the Windows Server 2003 machine where it does not and it behaves the same way on both.  The only difference is, when it exits the sub that filters through those if statements, on Windows Server 2003 the customer window does not come up and everywhere else it does.  Strange.
    Thanks for taking a look at this, I really appreciate it!

Maybe you are looking for