Symcjit.dll problem on Windows2000 - Installation of 8.1.6 fails

Hi,
I've seen a lot of reference to the JIT dll causing problems
with P4 chips.
I'd just like to make note that it can (but not always) cause a
problem on P3 systems.
I've confirmed the problem on Windows 2000 Pro and Windows 2000
Server, using P3 733MHz system with 256 MB RAM, installing
Oracle 8.1.6 Enterprise Edition.
The exact problem seems to occur when the OUI tries to launch
the Database Setup Assistant.
Just for the sake of being complete, the solution that worked
for me was:
1. Copy the entire CD to the HD.
2. REMOVE (or rename, doesn't matter) the offending file
(symcjit.dll)
3. Run Setup.exe
Contrary to other posts on this site, no other modifications to
any other files were required. Your mileage, of course, may vary.
Wow.. what a frustrating 3 days.

Sorry Eric,
I posted this as a notice, and never came back. :)
But since I did leave it vauge, I'll answer the question for anyone else that comes along.
The file version (obtained by right-click and Properties, Version tab) for the 8.1.6 install is:
3.10.0.107
and is 410 kb.
And the other part: No, you don't need to replace the file. Simply deleting it forces the installer to use a regular java interpreter from the jre on your system, the one currently being used by the Universal Installer perhaps (?), rather than the JIT one you have just deleted.
It's such an easy fix and appears to cause no problems, I wonder why the installer makes a switch to using it, half way through the install.
p.s. The reason I came back here is because I need to perform a second installation on a different box, and I had bookmarked this page. :) For once, I was thinking ahead.

Similar Messages

PSAPI.dll problem in oracle installation soa_windows_x86_101310_disk1

During 98% of the installation, it prompted the following message
"the procedure entry point GetProcessImageFileNameW could not be located in the dynamic link linrary PSAPI.dll"
I am on window XP and Explorer 7.
Does it matter to ignore the message and continue on the installation process.
I did try this route - meaning ignore the message but it seems I am not able to launch my BPEL console control properly.
I run some window tools noticed that
javaw.exe is running psapid.dll from ....Temp\OraInstall2008-04-18_09-28-41AM\psapi.dll
Is this correct ?
How does it get the copy of psapi.dll ?
I have a copy of psapi.dll under C:\WINDOWS\system32
Anyone has any idea how to resolve this problem ?

Does it matter to ignore the message and continue on the installation process.I did try this route - meaning ignore the message but it seems I am not able to launch my BPEL console control properly.
Yes, you cannot ignore the error message during installation because Oracle requires this dll file for the Oracle on Windows installation. Check to make sure that you have correct permissions granted for the Oracle installer to write to the Temp directory.

SYMCJIT.DLL error at the end of Installation in WL 5.1.0

hi,
I am using weblogic 5.1.0. I am getting error at the end of
installation saying
[Wlpasswdw has caused an error in SYMCJIT.DLL.Wlpasswdw will now close.
if you
continue to experiance problem,try restartng your computer .]
I am not able to run weblogic console, zac publisher, EJB deployer.
when i click
above application I am getting same DLL error.
I installed WL 5.1.0 on Windows 98SE in my machine. I got the same
problem.
But one of my freind installed WL 5.1.0 on windows 98. They are not
getting any problem
I uninstalled Jdk 1.3 at the time of installation but I am getting same
problem
Is there any problem in Symcjit.DLL & can i get copy of DLL for WL
5.1.0?
MY COMPUTER CONFIGURATION IS :
Windows ME , Pentium IV , 128 Mb
ram, JDK 1.3
Thanks
Uma

Hi.
Hard to say what the problem is. WIndows ME (or 98/95) is not a supported
platform - I recommend you switch to one of the platforms listed here:
http://edocs.bea.com/wls/platforms/index.html
Since this was the end of your installation you might try editing the
weblogic.properties file to create your system password
(weblogic.system.password=) and then try to run the server.
If this doesn't help then perhaps you can post the exception you get when
running the server here.
Regards,
Michael
Uma wrote:
hi,
I am using weblogic 5.1.0. I am getting error at the end of
installation saying
[Wlpasswdw has caused an error in SYMCJIT.DLL.Wlpasswdw will now close.
if you
continue to experiance problem,try restartng your computer .]
I am not able to run weblogic console, zac publisher, EJB deployer.
when i click
above application I am getting same DLL error.
I installed WL 5.1.0 on Windows 98SE in my machine. I got the same
problem.
But one of my freind installed WL 5.1.0 on windows 98. They are not
getting any problem
I uninstalled Jdk 1.3 at the time of installation but I am getting same
problem
Is there any problem in Symcjit.DLL & can i get copy of DLL for WL
5.1.0?
MY COMPUTER CONFIGURATION IS :
Windows ME , Pentium IV , 128 Mb
ram, JDK 1.3
Thanks
Uma--
Michael Young
Developer Relations Engineer
BEA Support

SYMCJIT.DLL error at the end of installation

hi,
I am using weblogic 5.1.0. I am getting error at the end of installation saying
[Wlpasswdw has caused an error in SYMCJIT.DLL.Wlpasswdw will now close. if you
continue to experiance problem,try restartng your computer .]
I am not able to run weblogic console, zac publisher, EJB deployer. when i click
above application I am getting same DLL error.
MY COMPUTER CONFIGURATION IS :
Windows ME , Pentium IV 1.6 Ghz, 128 Mb ram
Thanks

Hi.
Did you type in a password for weblogic.system.password in the weblogic.properties
file?
What JDK version are you running?
FWIW, Windows ME is not a supported OS. You might have better luck using one of the
OSs we specify at this link:
http://edocs.bea.com/wls/platforms/index.html
Thanks,
Michael
Uma wrote:
hi,
I am using weblogic 5.1.0. I am getting error at the end of installation saying
[Wlpasswdw has caused an error in SYMCJIT.DLL.Wlpasswdw will now close. if you
continue to experiance problem,try restartng your computer .]
I am not able to run weblogic console, zac publisher, EJB deployer. when i click
above application I am getting same DLL error.
MY COMPUTER CONFIGURATION IS :
Windows ME , Pentium IV 1.6 Ghz, 128 Mb ram
Thanks--
Michael Young
Developer Relations Engineer
BEA Support

HT1926 i cannot install itunes 11.4 and it says that dll to finish the installation is not found

so im trying to reinstall my itunes and there is a message saying that the dll to finish the installation is not found. so i need to contact the support. can anybody help me with this problem please.

Hi Dimas Muchammad,
Thanks for visiting Apple Support Communities.
If you are installing iTunes 11.1.4 on Windows and receiving an error during installation, the specific troubleshooting steps in this article can help:
iTunes 11.1.4 for Windows: Unable to install or open
All the best,
Jeremy

MSVCRT.DLL problem - missing DLL error

I am interested if anyone else has run across the problem of
post-installation error message referencing a missing MSVCRT.DLL
dynamic link library even though several versions show up on the
C: drive in various folders such as WIN32/SYSTEM? Also, the
Dev6 Patch 1 makes reference to a missing web cartridge product
that I thought would be part of the Developer Server side, not
the client. I used the latest CDROM for the client NT 4.0 Sp 4
Workstation installation. Any thoughts? Thanks in advance, GL
null

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Problems with the installation Oracle 8i Database

Hello,
I need help with the installation of Oracle 8i. i got the free version of Oracle 8i in Internet, but when i start the installation i clicked in the autorun.exe but this aplication don4t start.
Any one can help me,
Thanks by your time.

You must have Pentium4 computer. There is a patch for it, which essentially tells you to rename a symcjit.dll file. Copy all of your CD contents on hard-drive, symcjit.dll file, then click autorun.exe. it should work!!!
Rohit Desai

EM unusable following Windows2000 installation

EM unusable following Windows2000 installation.
Plain vanilla software installation with database
creation was without problems. Database is useable.
Services DBConsole and TNSListener are running.
However, http://host:5500/em says "database status
is currently unavailable".
It could be a misconfigured listner or missing service.
It is not the previoulsy reported EM login problem
using IE.

Is the Database service started?
Start the OracleService<SID>

Installed 7.1 on new Dell. Windows shuts down as result of "nixsrk.dll" problem.

I installed LV 7.1 on new Dell with XP.While running the LV application, Windows shuts down to prevent damage to computer as result of "nixsrk.dll" problem. What is the fix?
Thanks,

How is your application architected? Are you making calls to DLLs using a Call Library Function Node? It might be that for some reason some of the components for your application were installed correctly on the Dell computers. I would suggest that you try some other application and make sure whether the issue is with your application or LabVIEW installation.
Regards,
Chetan K
AE-NIC

Problem with universal installer

Hi
I have a problem with universal installer (version 2.1) as trying to intall IDS. Always it worked fine, but now, when I click on Next button of the home selector page (I fill right from/to fields), I get the message saying "problem to access the intermediate area; review if the values of destiny and origin are valid". In Spanish exactly is: "Se ha producido un problema al acceder a la zona intermedia. Asegúrese de que los valores especificados para \'Origen\' y \'Destino\' son válidos".
It stops the proccess and I can't continue. I review the log file and read the values and error message .
I deinstalled the ids pack, so may be it did some damage on my oracle installation. Also I try to start with another version I have on my computer (2.2), and it crashs just when I click on Next button of the welcome page. At the "hs_err_pidxx" of \archives of programs\oracle\oui, I can read the following:
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6d4873de
Function name=JVM_InitializeCompiler
Library=E:\Archivos de programa\Oracle\jre\1.3.1\bin\hotspot\jvm.dll
# HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
# Error ID : 4F530E43505002C4
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.3.1_01 mixed mode)
I have W2000prof, 1G in RAM, and always oracle worked very fine here.
Well, can somebody help me? any suggestions will be welcome.
Gracias

Do your install files reside in a path with spaces in it? I've experienced some problems with the Universal Installer, if e.g. I have my files in
c:\install\Oracle Forms 9i\
but if I write
c:\install\Oracle_Forms_9i\
there's no problem.
Regards,
Jesper Vad Kristensen

Problem with linux installation on Thinkpad T410i

Hello everyone. I have a problem with an installation of Linux (Debian). Installation ended in my Thinkpad T410i, but when you are starting, the computer constantly restarts. With windows does not happen. What's the problem?
Probe with two versions: one with and one without GUI, and always restarts during startup stage or just finish loading the operating system. If eligo Windows in GRUB, the pc works normally.
I appreciate any help you can give me.

Madhukar,
Check the below forums which also discuss about same problem like yours.
Trouble with SAP system installation GUI
error in installation of solution manager
Regards,
Debasis.

Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

Hello
Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6.
I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-001 but it has changed nothing someone could help me?

Please do not post the same question multiple times. If someone can help you, they will, but you need to be patient -- we're all just volunteers, users like yourself. I'm going to delete your other posts.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Problems by the Installation of Adobe Photoshop Elements 12

Problems by the Installation of Adobe Photoshop Elements 12 can some one help me please?

Thanks you so much,
Somehow it is solved now. It is now perfectly installed. and when it is as
easely as I was using 3.2 version, I shall buy it at once.
God bless you and thanks.
Alwin lyss
2014-07-11 22:01 GMT+02:00 kglad <[email protected]>:
Problems by the Installation of Adobe Photoshop Elements 12 created
by kglad <https://forums.adobe.com/people/kglad> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6543307#6543307>

Symcjit.dll problem on Windows2000 - Installation of 8.1.6 fails

Similar Messages

Maybe you are looking for