Syn-Asyn Bridge and correlation

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: Moved to more appropriate XI forum>
Edited by: Mike Pokraka on Jul 7, 2008 10:09 AM

Similar Messages

Regarding Syn-Asyn Bridge

Hi All,
Can any one explain the following:-
In Syn-Asy bridge, we are using Reveiver Step( open Syn/Asyn), Send step(Asyn), Receiver step(Asyn), Sendstep(close syn/Asyn bridge). In this case receiver is Asynchronous system, so we are taking response from Asy system?(i.e., 3rd step from above flow). This means receiver system in called as synchronous ( send step-request, receive-step response). Please explain why we are taking response from Asyn system in syn/asyn bridge?

Hi Ajay,
As you said is perfectly correct that we receive response from the Asynch system but synchronously.
As in the synch/asynch bridge, the synchronous business system sends request synchronously to the Integration Server (BPE) which in turn forwards that request asynchronously to the aynchronous business system(receiver). This receiver sends the asynch response to BPE back which is then sent back as anch response to the sender that is the synchronous business system.
Also refer to the topic Sync/Async Communication in the following link
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Also see the blog:
/people/henrique.pinto/blog/2007/08/02/syncasync-scenarios-without-bpm
Regards,
Shibani
*Reward with points if helpful*

Doubt on Syn/Asyn Bridge scenario without BPM

I followed the how to guide How To Realize a sync-async and async-sync bridge within the Adapter Framework,but issue still exists.
Its a File(QoS:BE)<=>Idoc scenario
1 File adapter sends a sync booking request to idoc(MSG type: FLIGHTBOOKING_CREATEANDRESP)
2 The idoc creates a booking in its system and then sends a async confirmation response(MSG type:
FLIGHTBOOKING_SENDRESPONSE) to the sender(sync file adapter)
In ID, there are 2 receiver determinations and 2 IF determinations for the request and the response.
Sender business system: NWB_FileSystem_XML
Sender CC: Syn_SenderChannel_FileXML
 Parameters Tab
Qos:BE
Poll Interval(secs) : 60
Processing Mode: Delete (Successfully processed files are deleted)
Adapter-Specific Message Attributes: Select File name
Module Tab
Processing Sequence
 AF_Modules/DynamicConfigurationBean 0
 AF_Modules/RequestOnewayBean 1
 CallSapAdapter 2
 AF_Modules/WaitResponseBean 3
Module Configuration
 0 key.0 write http://sap.com/xi/XI/System/File FileName
 0 value.0 message.correlationId
 1 passThrough true
 3 timeout 40000
Receiver CC: Dummy_ReceiverChannel_FileXML
 Parameters Tab
 Adapter-Specific Message Attributes: Select File name
Module Tab
Processing Sequence
 AF_Modules/DynamicConfigurationBean 0
 AF_Modules/NotifyResponseBean 1
Module Configuration
 0 key.0 read http://sap.com/xi/XI/System/File FileName
 0 value.0 message.correlationId
 1 timeout 40000
Receiver business system: nwb_107
Receiver CC: GeneratedReceiverChannel_Idoc
Agreements
Sender Agreement for NWB_FileSystem_XML uses CC: Syn_SenderChannel_FileXML
Receiver Agreement for NWB_FileSystem_XML uses CC: GeneratedReceiverChannel_Idoc
Receiver Agreement for nwb_107 uses CC: Dummy_ReceiverChannel_FileXML
The problems is:
The scenario only executes once and there are 2 XML messages in SXI_MONITOR with status Processed successfully.One of the message from idoc to file has the Acknowledgement MSG status still awaiting acknowledgement
In the runtime workbench,the status of CC:Syn_SenderChannel_FileXML is correctly configured and started.The latest Processing Details of Syn_SenderChannel_FileXML is 3/13/07 9:13:12 PM Processing started
Regards
Ming

The trace of the message from IDOC to File in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: PIAPPLUSER</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPNWB</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:12Z UTC+8</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = DBD16497D8475CF186920017314ECFFB</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0007</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0007</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface FLIGHTBOOKING_SENDRESPONSE.FLIGHTBOOKING_SENDRESPONSE01*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:12Z UTC+8</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:12Z UTC+8</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Demo/Agency FBOConfirmation_AirlineIDoc2Agency</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = NWB</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-13T13:13:13Z UTC+8</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>

Syn-Asyn Bridge

Hi all,
 https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Integration Directory:
 I fallowed 3 flows (wizard) for the fallowing scenario.
 Business system / business service (soap) to Integration process
 Integration Process to Business system (RFC)
 Integration Process to Business system (File)
When I am sending request to Integration server, it is giving the error like
XIServer:TOO_MANY_RECEIVERS_CASE_BE:
IN SXMB_MONI
<SAP:Stack>Multiple receivers are not permitted in synchronous calls</SAP:Stack>
Can any body tell How to solve this problem (Configuration step by step)

Hi all,
 Can any body tell me the configuration steps for this weblog
 https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]

BPM correlation and Sync-Asyn Bridge....

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....

Hi,
Defining Sync/Async Communication
To enable the communication between a synchronously calling business system (synchronous outbound interface) and an asynchronously called business system (asynchronous inbound and outbound interface), you can define a sync/async bridge in an integration process. You can only define one sync/async bridge for each integration process.
You can also achieve sync/async communication by using the JMS adapter. If you do not have any particular demand for monitoring or for troubleshooting, SAP recommends that you use sync/async communication in the JMS adapter instead. The advantage of using the JMS adapter over synch/async communication using an integration process is a significant increase in system performance.
See: Async/Sync and Sync/Async Bridge in JMS Adapter
Structure of a Sync/Async Bridge
The following table outlines the minimum components of a sync/async bridge:
Step
Use
Receive step to open the sync/async bridge
Receives the message request from the synchronously calling business system and opens the sync/async bridge
Asynchronous send step
Sends the received message asynchronously to the asynchronously called business system
Receive step
Receives the message from the asynchronously called business system
Send step to close the sync/async bridge
Sends, for example, the response from the asynchronously called business system to the synchronously calling business system
Performance Considerations
If you insert additional steps in the sync/async bridge, the synchronous time is increased correspondingly. If the time that elapses before the sync/async bridge is closed is too long, this can lead to problems.
Fault Messages
It is currently not possible to send fault messages back to the synchronously calling business system. If you want to return error statuses to the synchronously calling business system, you can define a field for an error indicator in the message that is sent to the synchronous interface.
Procedure
Define a Receive Step to Open the Sync/Async Bridge
       1.      Insert the receive step to open the sync/async bridge in the integration process.
You can do this at the following points:
○       Directly after the start marker
○       As the first step in a block if the block is the first step of the integration process and if it has the mode Standard
○       As the first step in a fork. If the fork already contains some starting receive steps, the Start Process indicator is automatically reset for these steps.
       2.      In the object area, define the container element that receives the synchronously sent message.
Specify an asynchronous, abstract interface in the container element. The message must correspond to the request message of the synchronous interface used to receive the message.
       3.      Select this container element in the Message field in the properties area of the receive step.
       4.      In the Mode field, select Open S/A Bridge.
       5.      Select the Start Process field.
The receive step to open the sync/async bridge must start the integration process. There must be no other receive steps to start the integration process.
       6.      Specify the synchronous interface for receiving the message from the synchronously calling business system. The message type of the message to be received and the request message from the synchronous interface must be identical.
Define an Asynchronous Send Step
       7.      Insert a send step that sends the received message asynchronously to the asynchronously called business system.
See also: Sending Messages from Integration Processes Asynchronously
Define a Receive Step
       8.      Insert a receive step that receives the message from the asynchronously called business system.
Define a Send Step to Close the Sync/Async Bridge
       9.      Insert the send step at the required position in the process definition.
Do not insert the send step in a loop, block, or fork.
   10.      In the Mode field, select Close S/A Bridge.
The integration process must not contain any further send steps to close a sync/async bridge.
   11.      In the Opened By field, specify the receive step that opened the sync/async bridge.
   12.      In the message field, specify the message that is sent to the synchronous interface.
This message must be of the same type as the response message from the synchronous interface that you specified in the opening receive step.
Example
You can find an example of a sync/async bridge in the Integration Repository under SAP Basis à SAP Basis 6.40, namespace http://sap.com/xi/XI/System/Patterns under BpmPatternSyncAsyncBridge.
For a description of the example, see Example: Sync/Async Communication.
Reg,
suresh

Correlation and Sync Asyn Bridge

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: thread locked. I moved your last post to XI, please do not post duplicate questions>
Edited by: Mike Pokraka on Jul 7, 2008 1:00 PM

Regarding Sync-Asyn ,I have gone thru these blogs...
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
I am not able to do a end to end scenario...using this ....So could any one give me a step by step guide for the syn-asyn Bridge.
And also step by step for correlation...
Please help me in this regard....
<Moderator note: thread locked. I moved your last post to XI, please do not post duplicate questions>
Edited by: Mike Pokraka on Jul 7, 2008 1:00 PM

Difference between syn/asyn vs asyn/syn Bridge

Hi Group,
Can any body give me the difference between Syn/Asyn Bridge ,Async/Sync
Beidge,and what are the satpes in both of these

Hi,
Sync/async communication enables a synchronous sender system to communicate with a receiver system that cannot process synchronous messages
Refer this blog
/people/ravikumar.allampallam/blog/2005/02/17/bridging-the-sync-async-bridge-with-fork-xi
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
There is an example of the Sync/Async Bridge in th SWCV: SAP BASIS.
Namespace: http://sap.com/xi/XI/System/Patterns
Asyn - Synch BPM - /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
regards

What is Syn to Asyn bridge

hi all,
it is one interview question.
what is Syn to Asyn bridge.
vijay

Hi Vijay,
You can use a sync/async bridge to connect a synchronous system to an asynchronous system. The synchronous request is converted to an asynchronous request in the module processor and sent.
The asynchronous system sends a response to a sender adapter. In the module processor of the sender adapter, this response is forwarded to the module processor of the original receiver adapter, where it is sent as a synchronous response of the waiting synchronous request.
Please have a look upon :
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
*Pls: Reward points if helpful*
Regards,
Jyoti

Can I supress BPM for Asyn outbound and syn inbound proxy interface

Hi all,
Is there any other alternate to remove the BPM at asyn outbound and syn inbound proxy interface. Reason because I can create another outbound proxy interface at the receiver. But at receiver side we already invested huge code to develop the sync server proxy. So the intension is, with out disturbing the code Can I make the message flow with out BPM?
Because the reason of removing BPM is for a simple interface like this I don't want to use BPM. souce is JDBC and receiver is ECC 6.0. I know with out BPM it can not be achieved but in PI 7.1 EHP 1 by any chance can we do?
I mean during response mapping from server proxy shall we use look up function to achieve?

This bean I have to use at sender channel right?
Yes
I mean is it is limited to JMS adapter?
No
You can find more information in the Wiki which deals with FILE to RFC synchronous...using the above Module

Syn/async bridge in bpm?

hi all,
could any one explain abut syn/async bridge in bpm?y it is used?

Hi,
Sync/async communication enables a synchronous sender system to communicate with a receiver system that cannot process synchronous messages
Plz go thru the following:
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
Asyn - Synch BPM - /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
regards
Message was edited by:
Vijaya Lakshmi MV

Syn & asyn in DG configuration

What is the difference between syn & asyn in DG configuration you’re using which one explains?

Hello;
SYNC mode synchronizes the primary with the standby database and all DML on the primary server will NOT be committed until the logs have been successfully transported to the standby servers. The synchronous log transport mode is required for the Maximum Protection and Maximum Availability data protection modes.
ASYNC allows updates (DML) to be committed on the primary server before the log file arrives on the standby servers. The asynchronous log transport mode is required for the Maximum Performance data protection mode.
Please close your old questions to keep the forum clean. You have 14 questions this month all OPEN. With all due respect this is NOT cool.
Best Regards
mseberg

Sync-Asyn Bridge

Hello friends,
Could any one give information or blog on Synch -Asyn Bridge used in HTTP --> RFC scenario

Hi,
Refer this..
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
BPM Sync- Async Bridge
Pipeline timeout error
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3d59c90-0201-0010-ac83-cfd0071f095a
Who to manage TimeOut in BPM ?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb5cc090-0201-0010-5284-fd5376b01934
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
regards,
vasanth.

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

Using Adobe Bridge and iPhoto together

I use Adobe Bridge (and Photoshop) to work on my photos. iPhoto is not an option since I shoot in Camera RAW. I also own an Apple TV and want to store all of my photos in iPhoto so they are available to the rest of my family via Apple TV. Has anyone figured out a way to do image manipulation first in Bridge & Photoshop and then have them sent (or later updated) in iPhoto in an automated fashion?
Conceptually, every time I add or change a photo in Bridge or Photoshop, I'd like to convert it to JPG, and add or modify the image in iPhoto.

Also make sure PS's File handing preferences "Macimize PSD and PSB File Compatibility" is set to Always and that there are no alpha channels in the file. An alpha channel will cause the black image that you're referring to.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

New update 8.7.1 CS6 ACR not working---(I own hard copy not a Trial or part of CC), I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In requir

I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.

When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
Also this is a user forum not a Adobe Customer Services web site.

Syn-Asyn Bridge and correlation

Similar Messages

Maybe you are looking for