Synaptic Touchpad drivers

For some time now my mouse hadnt been working so I was using an external mouse which worked correctly, but I gave the mouse out and I am trying to restore my touchpad on my computer so I went to the mouse property then I clicked on the software tab and realised there was no driver for my mouse.
Where can I find the synaptic touchpad drivers for Hp Pavilion dv7 2045eo? and If it is not a problem with the driver where can I find its solution?

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with the Touchpad of your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please re-install the touchpad drivers from HP Website in order to resolve the issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

HP Probook 6570b Synaptic touchpad drivers

I'm looking to disable the touchpad on one of my laptops and it seems that I do not have the synaptic drivers installed. The HP drivers & support site doesn't list any touchpad drivers for this laptop.

I was able to find the driver disk and found the synaptic drivers. I wonder why HP doesn't list the driver on the download site....

Synaptic TouchPad is deactivated upon Windows 7 Startup

Hello Everybody
I am using Lenovo G430 4152-C5Q Laptop.
I have been using Windows 7 RC since two months.
Today i updated all the software and drivers to Windows 7 Versions after noticing it in Lenovo support page.
Now Synaptic TouchPad is not working upon Windows 7 Startup.
Everytime i have to enable / disable TouchPad using the function keys to use it.
But if i uninstall the Synaptic TouchPad driver, the TouchPad is working well automatically upon every Windows 7 startup.
But don't recommend that option as Windows 7 Built-In driver is not utilizing all features of the TouchPad.

Yeah, i am very sure.
As Alps was unable to provide any additional features to my touchpad.
Moreover i am able to utilize all the features supported by the Synaptic driver.

Synaptic touch drivers not installing.

So I accidentally uninstalled the included synaptic touch drivers. I loaded new synaptic driver, but this one doesn't disable the touch pad in tablet mode. I tried loading the driver from Lenovo, but it's not working. I wants me to install the 64 bit version but the page claims it is the 64bit version. What gives?
Solved!
Go to Solution.

A new touchpad driver for Yoga 13 has just been released recently. Give it a try.
Synaptics TouchPad Driver - Win 8, 64bit
Version: 16.2.21.3
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

ConfigMgr 2012 R2 Client Failes to Install on HP EliteBook laptops with Synaptics Touchpad drivers

I've come across a fairly frustrating issue that has been taking up way too much of my time that past week or so. The issue started a little after some of our larger sites were migrated from SCCM 2007 to SCCM 2012. I started getting complaints that one of
our technical workstations (HP 8770w) was not deploying properly. I started investigating the issue and the problem involved the removal of the old ConfigMgr 2007 client and install of the new SCCM 2012 R2 client.
The Windows 7 x64 OS WIM that I am using is one that was migrated from the 07 to 2012 environment and it has been working fine. During the Setup Windows and ConfigMgr step the old client is removed and the new one for the 2012 environment installs. There
has not been any issues with this, but I feel something has changed now that we are deploying the 2012 R2 client.
Back to the issue, what happens is that the ConfigMgr client fails to uninstall the old client. Looking in the client.msi_uninstall file you will see that it is unable to locate a couple of SCCM 2007 configmgr client patches that were installed so it can
uninstall it. I get the "Couldn't find local patch ''. Looking for it at its source." line in the uninstall file. When I look for that under HKEY_CLASSES_ROOT\Installer\Patches the ENTIRE directory structure is empty. There is not a single item
listed under patches.
Since the only thing that happens in between the pushing down of the WIM and installing the configmgr client is the drivers that is where I started to look. I started over with the basics (disk and network driver) and it was able to complete the OSD process
(like the other 30+ models we currently support). I added drivers one by one having the system re-image each time. When I got to the Synaptics TouchPad drivers the issue would return. I've tried around 5 different drivers offered from the vendor and they
all result in the same behavior.
I'm still actively troubleshooting how to FIX this issue, but I have no idea why this is going on. I thought I would share with the community on this issue and see if anyone else has observed this VERY odd behavior.
Here is a snippet from the client.msi_uninstall log:
=== Verbose logging started: 1/15/2014 22:59:34 Build type: SHIP UNICODE 5.00.7601.00 Calling process: D:\_SMSTaskSequence\OSD\GAS000EF\ccmsetup.exe ===
MSI (c) (6C:BC) [22:59:34:264]: Resetting cached policy values
MSI (c) (6C:BC) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (c) (6C:BC) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (c) (6C:BC) [22:59:34:264]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (6C:BC) [22:59:34:264]: Grabbed execution mutex.
MSI (c) (6C:BC) [22:59:34:264]: Cloaking enabled.
MSI (c) (6C:BC) [22:59:34:264]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (6C:BC) [22:59:34:264]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:264]: Running installation inside multi-package transaction {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
MSI (s) (00:80) [22:59:34:264]: Grabbed execution mutex.
MSI (s) (00:D4) [22:59:34:264]: Resetting cached policy values
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'Debug' is 0
MSI (s) (00:D4) [22:59:34:264]: ******* RunEngine:
           ******* Product: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}
           ******* Action:
           ******* CommandLine: **********
MSI (s) (00:D4) [22:59:34:264]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (00:D4) [22:59:34:405]: SRSetRestorePoint skipped for this transaction.
MSI (s) (00:D4) [22:59:34:405]: End dialog not enabled
MSI (s) (00:D4) [22:59:34:405]: Original package ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: Package we're running from ==> C:\Windows\Installer\b8ba.msi
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall Flags override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall VersionNT override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: Uninstall ServicePackLevel override found.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: looking for appcompat database entry with ProductCode '{2609EDF1-34C4-4B03-B634-55F3B3BC4931}'.
MSI (s) (00:D4) [22:59:34:405]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (00:D4) [22:59:34:420]: MSCOREE not loaded loading copy from system32
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: User policy value 'DisableMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {D478B8EE-EE0A-4004-980B-4D55533EE3C2} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {D478B8EE-EE0A-4004-980B-4D55533EE3C2}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {D478B8EE-EE0A-4004-980B-4D55533EE3C2} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: Couldn't find local patch ''. Looking for it at its source.
MSI (s) (00:D4) [22:59:34:420]: Resolving Patch source.
MSI (s) (00:D4) [22:59:34:420]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Looking for sourcelist for product {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Note: 1: 1706 2: {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} 3:
MSI (s) (00:D4) [22:59:34:420]: SOURCEMGMT: Failed to resolve source
MSI (s) (00:D4) [22:59:34:420]: Searching provided command line patches for patch code {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE}
MSI (s) (00:D4) [22:59:34:420]: Could not find source for missing patch {599B62C0-F1BE-4FE8-80D9-36937D5DDBFE} -- orphaning this patch
MSI (s) (00:D4) [22:59:34:420]: SequencePatches starts. Product code: {2609EDF1-34C4-4B03-B634-55F3B3BC4931}, Product version: 4.00.6487.2000, Upgrade code: {252DA259-82CA-4177-B8D0-49C78937BA3E}, Product language 1033
MSI (s) (00:D4) [22:59:34:420]: SequencePatches returns success.
MSI (s) (00:D4) [22:59:34:420]: Final Patch Application Order:
MSI (s) (00:D4) [22:59:34:420]: Other Patches:
MSI (s) (00:D4) [22:59:34:420]: Internal Exception during install operation: 0xc0000005 at 0x000007FEFDBF35E1.
MSI (s) (00:D4) [22:59:34:420]: WER report disabled for silent install.
MSI (s) (00:D4) [22:59:34:420]: Internal MSI error. Installer terminated prematurely.
MSI (s) (00:D4) [22:59:34:420]: MainEngineThread is returning 1603
MSI (s) (00:80) [22:59:34:420]: No System Restore sequence number for this installation.
Unexpected Termination
MSI (s) (00:80) [22:59:34:420]: User policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Machine policy value 'DisableRollback' is 0
MSI (s) (00:80) [22:59:34:420]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (00:80) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (00:80) [22:59:34:420]: Restoring environment variables
MSI (c) (6C:BC) [22:59:34:420]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (6C:BC) [22:59:34:420]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/15/2014 22:59:34 ===

@Narcoticoo
I've not used the tool. This issue has also expanded since the original title as I'm getting the same behavior with the driver package that does not include the Touchpad driver anymore. I'm currently going back to just the network and storage driver to see
if it works or not.
However, this is the bigger issue I have:
I have an older build called Build 5.7 internally. Using that WIM and the same driver package (original one that has the Touchpad driver included) it works without issue. Never had a problem.
The new build is called Build 6.0 internally. This WIM and the same driver package has not been working at all.
We support about 35 models with our current Windows 7 x64 image and I am having the same failure issue on four different HP models. They are the 8770w, ZBook 17, Z600 and Z820. The majority of the other systems are Dell devices. Just for transparency sakes,
nothing Dell specific is in the core WIM that is captured.
So, Build 5.7 can deploy just fine on all pieces of hardware with their old driver packages. The new Build 6.0 intalls on almost every platform fine with their old driver packages. These four HP systems are nothing but trouble though. I've opened a case
with HP to see if they have noticed anything internally. I'm not too hopeful, but at least it is something. Maybe there is some odd conflict with a newer Windows patch or some odd dependency on older HP drivers. The new image has .NET 4.5.1, IE 10 and so forth.

Touchpad drivers not installing for U310 Touch on Windows 7

My wife got a U310 Touch today which is a nice little computer. However it came with Windows 8 and she prefers Windows 7, so I took care of clearing the hard drive and installing Windows 7. We installed all the Windows 7 drivers from the Lenovo support site however the touchpad drivers fail to install. I tried manually installing the Synaptec drivers but it told me I don't have a Synaptec device. I then installed the Cypress drivers manually and rebooted but then the trackpad doesn't work at all.
I looked in Device Manager and the Hardware ID for the PS/2 Compatible Mouse says SYN2B0B which appears by all internet research to be a Synaptics hardware ID, which would make it understandable that the Cypress driver didn't work but really irritating that the Synaptics installer won't run because it says I don't have a Synaptics device.
What should I do? The default Microsoft drivers are OK but she really wants to disable the tap to click and adjust some of the other settings that aren't available without real touchpad drivers.

hi Ngravelyn,
Welcome to Lenovo Community Forums!
Please try this auto detect, Check if this one works
TouchPad Driver (Synaptics, Cypress)
0wto11ww.exe
142MB
Please make sure to uninstall any Installed driver for the touchpad first before installing this.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite L550-18M - Cannot find any Touchpad Drivers

Hello.
I just bought a Toshiba Satellite L550-18M and I can`t seem to locate any drivers for the full use of my touchpad (can`t use scrolling, nor zooming functions).
I tried installing some synaptics from the our sugestions official website and some synaptics drivers from a Toshiba Satellite L500D, but it didn`t help.
Please send your suggestions.
Thanks

Hi mate
I dont know what Windows OS you have but I assume you are using Win 7 64bit. Right?
The L550-18M belongs to PSLNEE series.
It seems that there are no many drivers published for this series.
But there are touchpad drivers for other Satellite L550 series.
The Alps Electric and Synaptics touchpad drivers are released.
In driver download form choose;
- Satellite
- Satellite L series
- Satellite L550
- All (short model)
- All (operating system)
- Touchpad driver
Then you will get all drivers for touchpad.
PS: be sure that the touchpad settigns are configured in control panel -> mouse -> device settigns

Satellite A200-226: I can't find my touchpad drivers

Hi,
I have a Toshiba A200-226, and I've been using Windows 7 professional for a while, but I've formated the PC and now I can't find my touchpad drivers...
It has dual mode, so the synaptics web site drivers are not complete, can someone help me on this?
Regards

hi,
you can check it on the Toshiba driver page:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
if you don't find win 7, try vista's one. Note, satellite a200 drivers are placed in *archive* in +family+ section

Synaptic TouchPad Driver update issue

I am having issues with the touchpad update. I have a HP 15, non touch screen version, and the update will download but fail to install. Is this an issue with the udate it self or is it something to do with my PC?

Hi there @smiling_guy92
I understand that your touchpad drivers did not update properly. I am happy to help with this.
I assume you are using the HP Support Assistant for your updates. With that in mind, please see the following, which should help with any issues with that software.
HP PCs - Troubleshooting HP Support Assistant (Windows 8)
Using HP Support Assistant (Windows 8)
If however you still have trouble or it is not the HP support assistant that you are having problems with, please post the full product number and verify the operating system in use on your notebook. See the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP g6-1b68nr NEED SYNAPTIC TOUCHPAD INFO

SYNAPTIC TOUCHPAD ADVICE FOR g6-1b68nr -- Laptops still function great! EXCEPT---
It's 3 yrs since I purchsed 2 exactly the same g6-1b68nr Pavilion Notebooks. One I used myself and it has SYNAPTIC TOUCHPAD functions intact; works great.
The other I just started using again (differnt house) but Synptics are missing even in the Search menu.
Looking for the right HP or other safe link, to reinstall software or maybe, all that's needed is Driver Update? Not sure.
Thnx for any advice. Today is 10 Dec. 2014
This question was solved.
View Solution.

Hi:
Below is the link to the support and driver page for your notebook.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&os=4063&product=5128912&sw_lang=
The touchpad driver can be found under the keyboard and mouse driver section for the operating system you are running.

Linux Mint/Ubuntu touchpad drivers u410

Hi, can one of the lenovo reps provide, or explain why they are not providing touchpad drivers for the u410 in linux. I have a bit of a hack going that allows tapping on a certain area of the touchpad to register as a right click, but depressing the clicker to the right of the marking just does a normal left click.
Any method of registering a right depress of the touchpad as a right click will do me.
Thanks.

create /etc/X11/xorg.conf.d/51-clickpad.conf
(i had to create the xorg.conf.d folder)
put the following text into it, log off and log on:
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
EndSection
I intend on playing with that 82% value, perhaps changing it down to 62%, because the height that the right button responds from isn't the same as the left button with the above solution.
What way did you set up the hard drives with the u410? I wiped both, put mint 13 on the SDD and have the HDD for data. Do you know if that's a sane idea? I've heard SDDs might not last very long, but then I've also heard info to the contrary. Also think the mic doesn't work out of the box. Did you set up the nvidia card with bumblebee? Nice laptop really, have had to reinstall linux 4 or 5 times to get to this (finally stable) state though, given all my attempted twickery. Had intended on putting ubuntu studio on it, but it kept freezing (as did mint). Would love any info on moving the home folder (and anything else that makes sense) to the HDD. From Galway... Out

Scrolling Synaptic Touchpad Problem (Arch Wiki didn't solve it)

Good to the whole Arch's community.
First of all to appear, I am codebuster and am new in this community and in this magnificent distro that I have been charmed with for his simplicity and performance. Always I had begun for behind the topic of the configuration of Arch's installation, but consulting his magnificent tips and coming to the official information it me has been possible. I have everything working of correct form except the function of scroll of my touchpad Synaptic (function that I use always and that really I throw enough in lack). I have followed the steps indicated so much in the Wiki (http://wiki.archlinux.org/index.php/Touchpad_Synaptics) as in numerous forums of linux in inet but I have not managed to make it work, for what I resort to you to seeing if someone can throw something of light.
Let's begin.
PC: Acer Aspire 5610
Distribution: ArchLinux updated a today.
Desktop: XFCE
Graphics: NVIDIA Geforce GO 7300 (proprietary Drivers: NVIDIA Driver Version:256.35)
Driver: xf86-input-synaptics-1.2.2-2
hardinfo
Name PS/2 Synaptics TouchPad
Type Mouse
Bus 0x11
Vendor 2
Product 0x1
Version 0x0
Connected to isa0060/serio/input0
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input5
U: Uniq=
H: Handlers=mouse0 event5
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri2"
Load "dbe"
Load "record"
Load "glx"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G72M [Quadro NVS 110M/GeForce Go 7300]"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg.0.log
[ 18.827]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 18.828]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 18.828] X Protocol Version 11, Revision 0
[ 18.828] Build Operating System: Linux 2.6.34-ARCH i686
[ 18.828] Current Operating System: Linux arch-live 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 21:03:38 UTC 2010 i686
[ 18.828] Kernel command line: root=/dev/disk/by-uuid/2cf26781-3ca3-4654-8b83-37ea60864aab ro
[ 18.828] Build Date: 21 June 2010 11:54:27AM
[ 18.828]
[ 18.829] Current version of pixman: 0.18.2
[ 18.830] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.830] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.830] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 26 15:21:50 2010
[ 18.909] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.909] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.962] (==) ServerLayout "X.org Configured"
[ 18.962] (**) |-->Screen "Screen0" (0)
[ 18.962] (**) | |-->Monitor "Monitor0"
[ 18.963] (**) | |-->Device "Card0"
[ 18.963] (**) |-->Input Device "Mouse0"
[ 18.963] (**) |-->Input Device "Keyboard0"
[ 18.963] (==) Automatically adding devices
[ 18.963] (==) Automatically enabling devices
[ 19.052] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.052] Entry deleted from font path.
[ 19.063] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.063] Entry deleted from font path.
[ 19.063] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.064] Entry deleted from font path.
[ 19.064] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.064] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.064] Entry deleted from font path.
[ 19.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.064] Entry deleted from font path.
[ 19.064] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.064] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.064] Entry deleted from font path.
[ 19.064] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.064] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 19.064] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19.064] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 19.064] (WW) Disabling Mouse0
[ 19.064] (WW) Disabling Keyboard0
[ 19.064] (II) Loader magic: 0x81e9d00
[ 19.064] (II) Module ABI versions:
[ 19.064] X.Org ANSI C Emulation: 0.4
[ 19.064] X.Org Video Driver: 7.0
[ 19.064] X.Org XInput driver : 9.0
[ 19.064] X.Org Server Extension : 3.0
[ 19.088] (--) PCI:*(0:1:0:0) 10de:01d7:1025:0090 nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd0000000/16777216
[ 19.088] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.088] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) "dri" will be loaded by default.
[ 19.088] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 19.088] (II) LoadModule: "dri2"
[ 19.141] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.175] (II) Module dri2: vendor="X.Org Foundation"
[ 19.175] compiled for 1.8.1.902, module version = 1.2.0
[ 19.175] ABI class: X.Org Server Extension, version 3.0
[ 19.176] (II) Loading extension DRI2
[ 19.176] (II) LoadModule: "dbe"
[ 19.176] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.187] (II) Module dbe: vendor="X.Org Foundation"
[ 19.187] compiled for 1.8.1.902, module version = 1.0.0
[ 19.187] Module class: X.Org Server Extension
[ 19.187] ABI class: X.Org Server Extension, version 3.0
[ 19.187] (II) Loading extension DOUBLE-BUFFER
[ 19.187] (II) LoadModule: "record"
[ 19.187] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.188] (II) Module record: vendor="X.Org Foundation"
[ 19.188] compiled for 1.8.1.902, module version = 1.13.0
[ 19.188] Module class: X.Org Server Extension
[ 19.188] ABI class: X.Org Server Extension, version 3.0
[ 19.188] (II) Loading extension RECORD
[ 19.188] (II) LoadModule: "glx"
[ 19.189] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.431] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.431] compiled for 4.0.2, module version = 1.0.0
[ 20.431] Module class: X.Org Server Extension
[ 20.431] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:21:24 PDT 2010
[ 20.431] (II) Loading extension GLX
[ 20.431] (II) LoadModule: "extmod"
[ 20.432] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.441] (II) Module extmod: vendor="X.Org Foundation"
[ 20.441] compiled for 1.8.1.902, module version = 1.0.0
[ 20.441] Module class: X.Org Server Extension
[ 20.441] ABI class: X.Org Server Extension, version 3.0
[ 20.441] (II) Loading extension MIT-SCREEN-SAVER
[ 20.441] (II) Loading extension XFree86-VidModeExtension
[ 20.441] (II) Loading extension XFree86-DGA
[ 20.441] (II) Loading extension DPMS
[ 20.441] (II) Loading extension XVideo
[ 20.441] (II) Loading extension XVideo-MotionCompensation
[ 20.441] (II) Loading extension X-Resource
[ 20.441] (II) LoadModule: "dri"
[ 20.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.451] (II) Module dri: vendor="X.Org Foundation"
[ 20.451] compiled for 1.8.1.902, module version = 1.0.0
[ 20.451] ABI class: X.Org Server Extension, version 3.0
[ 20.451] (II) Loading extension XFree86-DRI
[ 20.451] (II) LoadModule: "nvidia"
[ 20.452] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 20.560] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.560] compiled for 4.0.2, module version = 1.0.0
[ 20.560] Module class: X.Org Video Driver
[ 20.620] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:59:34 PDT 2010
[ 20.625] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 20.625] (++) using VT number 7
[ 20.629] (II) Primary Device is: PCI 01@00:00:0
[ 20.645] (II) Loading sub module "fb"
[ 20.646] (II) LoadModule: "fb"
[ 20.654] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.675] (II) Module fb: vendor="X.Org Foundation"
[ 20.675] compiled for 1.8.1.902, module version = 1.0.0
[ 20.675] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.675] (II) Loading sub module "wfb"
[ 20.675] (II) LoadModule: "wfb"
[ 20.676] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 20.694] (II) Module wfb: vendor="X.Org Foundation"
[ 20.694] compiled for 1.8.1.902, module version = 1.0.0
[ 20.694] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.694] (II) Loading sub module "ramdac"
[ 20.694] (II) LoadModule: "ramdac"
[ 20.694] (II) Module "ramdac" already built-in
[ 20.744] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 20.744] (==) NVIDIA(0): RGB weight 888
[ 20.744] (==) NVIDIA(0): Default visual is TrueColor
[ 20.744] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 20.744] (**) NVIDIA(0): Enabling RENDER acceleration
[ 20.744] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 20.744] (II) NVIDIA(0): enabled.
[ 22.341] (II) NVIDIA(0): NVIDIA GPU GeForce Go 7300 (G72) at PCI:1:0:0 (GPU-0)
[ 22.341] (--) NVIDIA(0): Memory: 262144 kBytes
[ 22.341] (--) NVIDIA(0): VideoBIOS: 05.72.22.58.30
[ 22.341] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 22.341] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 22.341] (--) NVIDIA(0): Connected display device(s) on GeForce Go 7300 at PCI:1:0:0:
[ 22.341] (--) NVIDIA(0): LPL (DFP-0)
[ 22.341] (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[ 22.341] (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
[ 22.355] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 22.355] (==) NVIDIA(0):
[ 22.355] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 22.355] (==) NVIDIA(0): will be used as the requested mode.
[ 22.355] (==) NVIDIA(0):
[ 22.355] (II) NVIDIA(0): Validated modes:
[ 22.355] (II) NVIDIA(0): "nvidia-auto-select"
[ 22.356] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[ 22.356] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[ 22.356] (--) NVIDIA(0): option
[ 22.356] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 22.356] (--) Depth 24 pixmap format is 32 bpp
[ 22.358] (II) NVIDIA(0): Initialized GPU GART.
[ 22.371] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 22.371] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 22.371] (WW) NVIDIA(0): ACPI: Error: Unable to find the brightness file path under
[ 22.372] (WW) NVIDIA(0): /proc/acpi/video. The NVIDIA X driver will not be able to
[ 22.372] (WW) NVIDIA(0): respond to ACPI brightness change hotkey events.
[ 22.372] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 23.783] (II) Loading extension NV-GLX
[ 23.817] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 23.831] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23.831] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 23.851] (==) NVIDIA(0): Backing store disabled
[ 23.851] (==) NVIDIA(0): Silken mouse enabled
[ 23.858] (==) NVIDIA(0): DPMS enabled
[ 23.858] (II) Loading extension NV-CONTROL
[ 23.859] (II) Loading extension XINERAMA
[ 23.859] (II) Loading sub module "dri2"
[ 23.859] (II) LoadModule: "dri2"
[ 23.860] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.860] (II) NVIDIA(0): [DRI2] Setup complete
[ 23.860] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 23.860] (==) RandR enabled
[ 23.860] (II) Initializing built-in extension Generic Event Extension
[ 23.860] (II) Initializing built-in extension SHAPE
[ 23.860] (II) Initializing built-in extension MIT-SHM
[ 23.860] (II) Initializing built-in extension XInputExtension
[ 23.860] (II) Initializing built-in extension XTEST
[ 23.860] (II) Initializing built-in extension BIG-REQUESTS
[ 23.860] (II) Initializing built-in extension SYNC
[ 23.860] (II) Initializing built-in extension XKEYBOARD
[ 23.860] (II) Initializing built-in extension XC-MISC
[ 23.860] (II) Initializing built-in extension SECURITY
[ 23.860] (II) Initializing built-in extension XINERAMA
[ 23.860] (II) Initializing built-in extension XFIXES
[ 23.860] (II) Initializing built-in extension RENDER
[ 23.860] (II) Initializing built-in extension RANDR
[ 23.860] (II) Initializing built-in extension COMPOSITE
[ 23.860] (II) Initializing built-in extension DAMAGE
[ 23.864] (II) Initializing extension GLX
[ 24.465] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 24.465] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.465] (II) LoadModule: "evdev"
[ 24.466] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.483] (II) Module evdev: vendor="X.Org Foundation"
[ 24.483] compiled for 1.8.0, module version = 2.4.0
[ 24.483] Module class: X.Org XInput Driver
[ 24.483] ABI class: X.Org XInput driver, version 9.0
[ 24.483] (**) Power Button: always reports core events
[ 24.483] (**) Power Button: Device: "/dev/input/event4"
[ 24.491] (II) Power Button: Found keys
[ 24.491] (II) Power Button: Configuring as keyboard
[ 24.491] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.491] (**) Option "xkb_rules" "evdev"
[ 24.491] (**) Option "xkb_model" "evdev"
[ 24.491] (**) Option "xkb_layout" "us"
[ 24.579] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 24.580] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.580] (**) Video Bus: always reports core events
[ 24.580] (**) Video Bus: Device: "/dev/input/event5"
[ 24.587] (II) Video Bus: Found keys
[ 24.587] (II) Video Bus: Configuring as keyboard
[ 24.587] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 24.587] (**) Option "xkb_rules" "evdev"
[ 24.587] (**) Option "xkb_model" "evdev"
[ 24.587] (**) Option "xkb_layout" "us"
[ 24.593] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.594] (**) Power Button: always reports core events
[ 24.594] (**) Power Button: Device: "/dev/input/event3"
[ 24.600] (II) Power Button: Found keys
[ 24.600] (II) Power Button: Configuring as keyboard
[ 24.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.600] (**) Option "xkb_rules" "evdev"
[ 24.601] (**) Option "xkb_model" "evdev"
[ 24.601] (**) Option "xkb_layout" "us"
[ 24.602] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.602] (II) No input driver/identifier specified (ignoring)
[ 24.602] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.602] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.602] (**) Sleep Button: always reports core events
[ 24.602] (**) Sleep Button: Device: "/dev/input/event2"
[ 24.611] (II) Sleep Button: Found keys
[ 24.611] (II) Sleep Button: Configuring as keyboard
[ 24.611] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 24.611] (**) Option "xkb_rules" "evdev"
[ 24.611] (**) Option "xkb_model" "evdev"
[ 24.611] (**) Option "xkb_layout" "us"
[ 24.613] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 24.613] (II) No input driver/identifier specified (ignoring)
[ 24.619] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/event7)
[ 24.619] (**) MosArt Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 24.619] (**) MosArt Optical Mouse: always reports core events
[ 24.619] (**) MosArt Optical Mouse: Device: "/dev/input/event7"
[ 24.631] (II) MosArt Optical Mouse: Found 3 mouse buttons
[ 24.631] (II) MosArt Optical Mouse: Found scroll wheel(s)
[ 24.631] (II) MosArt Optical Mouse: Found relative axes
[ 24.631] (II) MosArt Optical Mouse: Found x and y relative axes
[ 24.631] (II) MosArt Optical Mouse: Configuring as mouse
[ 24.631] (**) MosArt Optical Mouse: YAxisMapping: buttons 4 and 5
[ 24.631] (**) MosArt Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.631] (II) XINPUT: Adding extended input device "MosArt Optical Mouse" (type: MOUSE)
[ 24.631] (**) MosArt Optical Mouse: (accel) keeping acceleration scheme 1
[ 24.631] (**) MosArt Optical Mouse: (accel) acceleration profile 0
[ 24.631] (**) MosArt Optical Mouse: (accel) acceleration factor: 2.000
[ 24.631] (**) MosArt Optical Mouse: (accel) acceleration threshold: 4
[ 24.631] (II) MosArt Optical Mouse: initialized for relative axes.
[ 24.632] (II) config/udev: Adding input device MosArt Optical Mouse (/dev/input/mouse1)
[ 24.632] (II) No input driver/identifier specified (ignoring)
[ 24.638] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.638] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.638] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.638] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.651] (II) AT Translated Set 2 keyboard: Found keys
[ 24.651] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.651] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 24.651] (**) Option "xkb_rules" "evdev"
[ 24.651] (**) Option "xkb_model" "evdev"
[ 24.651] (**) Option "xkb_layout" "us"
[ 24.652] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/event6)
[ 24.652] (**) PS/2 Synaptics TouchPad: Applying InputClass "evdev pointer catchall"
[ 24.652] (**) PS/2 Synaptics TouchPad: always reports core events
[ 24.652] (**) PS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 24.664] (II) PS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 24.664] (II) PS/2 Synaptics TouchPad: Found relative axes
[ 24.664] (II) PS/2 Synaptics TouchPad: Found x and y relative axes
[ 24.664] (II) PS/2 Synaptics TouchPad: Configuring as mouse
[ 24.664] (**) PS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 24.664] (**) PS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.664] (II) XINPUT: Adding extended input device "PS/2 Synaptics TouchPad" (type: MOUSE)
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.664] (**) PS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.664] (II) PS/2 Synaptics TouchPad: initialized for relative axes.
[ 24.665] (II) config/udev: Adding input device PS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.665] (II) No input driver/identifier specified (ignoring)
10-evdev.conf
# Catchall classes for input devices
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "VertEdgeScroll" "true"
Option "VertScrollDelta" "100"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
10-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertEdgeScroll" "true"
Option "VertScrollDelta" "100"
EndSection
Good, I believe that this is quite, if you need more information tell to me and it will make it come near.
Excuse me for my poor english,Thanks in advance and best regards.
codebuster.
Last edited by codebuster (2010-07-26 14:44:07)

kgas wrote:
there is no need to include the synaptics option. here is mine and works fine (Acer Aspire 5738G)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G98M [GeForce G 105M]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
¡¡¡¡ Thanks a lot for the info !!!
I remove all the Synaptics entries in the xorg.conf and worked fine with the /dev/input/mice option (in the Arch Wiki was # commented, the device, was /dev/psaux, and my mouse in hardinfo was recognized as PS/2 Synaptic for that I thought that it was the correct option ).
Only one question, now I have set the scrolling mode with two fingers, ¿do you know how to activate one finger scrolling? I tried with these options in Mouse section but doesn't work for me:
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "false" # enable horizontal scroll zone
Option "VertTwoFingerScroll" "false" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "false" # horizontal scroll anywhere with two fingers
¡ Many, many thanks and my best regards !
codebuster.
Last edited by codebuster (2010-07-26 08:26:55)

G6 2006-tx: synaptic touchpad is not listed in mice and other pointind device (device manager)

hi,
i just upgrade my window 7 home to window 8 pro... and i am now unable to scroll through my touch pad.
before upgrading, my touch pad was working properly, but now its only work as mouse to click items.
neither it scrolling nor zooming using two fingers.
plz tell me, should i have to reinstall my synaptic touch pad drivers?
plz provide me link
model: hp pavillion g6 2006-tx

Hello,
I see that you're having an issue with the touchpad not showing up in the device manager. This could be because you're missing the drivers for the touchpad in Win8.
Here are the drivers you will need to install. Also, go ahead and follow this document if you're having any other issues with the touchpad.
This document has several sections that will help you will every possible issue.
If you have any other questions let me know. Please let me know the outcome to this also.
THX

Synaptic touchpad stops working now and then on ProBook 6450b

The touchpad on my ProBook 6450b stops working every now and then. It just freezes, no error message or anything. It always works again after I reboot. It also starts working immediately if I go to the Task Manager and kill SynTPEnh.exe and then restart SynTPEnh.exe via Explorer (C:\Program Files\Synaptic\SynTP\SynTPEnh.exe). I have had this machine for 9 months, and these problems started only a couple of weeks ago. There are no error messages, and Device Manager says the device is working properly even when the touchpad is frozen. Sometimes I can go days without having a freeze, sometimes multiple freezes within minutes. Also, it happens during different activities - web browsing, watching movies, etc.
I'm not sure, but I might have enabled the WiFi-card in the BIOS prior to having these problems. However, as I currently need wireless, disabling it again is not an option.
I tried updating the BIOS, but the installation program wouldn't detect my SanDisk Cruzer USB stick, so I couldn't make a backup and decided to abort the procedure. I also tried installing another version of the Synaptic driver (can't remember the version, but it said "Evaluation Copy" on the Synaptic device in the Control Panel). It worked for a couple of days, then I got the old freeze again.
My setup:
HP ProBook 6450b
Windows 7 Professional 32-bit
Synaptic driver version 15.0.24

As a "quick'n'dirty" solution, I figured out how to automate this process. Simply create a new textfile called "Restart Synaptics.bat" and enter the following into it:
taskkill /IM SynTPEnh.exe /F
"C:\Program Files\Synaptics\SynTP\SynTPEnh.exe"
This will kill the SynTPEnh.exe process and then restart it. Now put a shortcut to your batch file in the Start Menu for easy access.

Touchpad drivers installation for Mini 110

Have a HP Mini 110 1030NR PC, with XP. Where do I find the latest drivers for my touchpad? How do I install the new drivers?

You can download the touchpad driver from here... ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43663.exe
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Synaptic Touchpad drivers

Similar Messages

Maybe you are looking for