Synaptic TouchPad is deactivated upon Windows 7 Startup

Hello Everybody
I am using Lenovo G430 4152-C5Q Laptop.
I have been using Windows 7 RC since two months.
Today i updated all the software and drivers to Windows 7 Versions after noticing it in Lenovo support page.
Now Synaptic TouchPad is not working upon Windows 7 Startup.
Everytime i have to enable / disable TouchPad using the function keys to use it.
But if i uninstall the Synaptic TouchPad driver, the TouchPad is working well automatically upon every Windows 7 startup.
But don't recommend that option as Windows 7 Built-In driver is not utilizing all features of the TouchPad.

Yeah, i am very sure.
As Alps was unable to provide any additional features to my touchpad.
Moreover i am able to utilize all the features supported by the Synaptic driver.

Similar Messages

Windows 7 x64 only installs the drivers for USB devices that are plugged in upon system startup

Hi all,
I have a most unusual problem. On my personal desktop, I can only use USB devices that are plugged in upon system startup. If I unplug a USB device and then plug it in again, the driver will not install correctly. I cannot force the device to start and I
can't pick a driver manually. All I get is this. If I plug in a USB device and then reboot, the driver gets installed correctly and I can use it until I unplug it again. I'm pretty sure it's a Windows issue
but I can list the hardware I have if it is needed.
I have tried:
Running an SFC /SCANNOW as administrator
Uninstalling all USB controllers via device manager and letting them reinstall
Neither worked to resolve the issue. If this was a client's computer I would probably just reinstall Windows but because this is my main work PC it'd be a huge hassle to do it, so I'd really appreciate any other ideas anyone has. If I have to reinstall I
will. Thanks!

Hi,
Since the issue just happened for 4 monthes, I consider that some changes or updates may cause the issue.
Please also try to restore the system back to the point before this issue.
You can also try these steps:
1.Power down your laptop or desktop
2.Physically unplug the computer. If it’s a laptop, remove the battery too.
3.Leave it disconnected for three minutes
4.Replug the desktop or reinsert the battery
5.Power on the system
For the reasons, you can refer to this article:
How to fix “USB device not recognized”
http://www.fixedbyvonnie.com/2013/10/how-to-fix-usb-device-not-recognized/#.UvtCLf7xvwo
Kate Li
TechNet Community Support

Synaptic Touchpad drivers

For some time now my mouse hadnt been working so I was using an external mouse which worked correctly, but I gave the mouse out and I am trying to restore my touchpad on my computer so I went to the mouse property then I clicked on the software tab and realised there was no driver for my mouse.
Where can I find the synaptic touchpad drivers for Hp Pavilion dv7 2045eo? and If it is not a problem with the driver where can I find its solution?

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with the Touchpad of your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please re-install the touchpad drivers from HP Website in order to resolve the issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

BootCamp Partition- Missing Operating System Windows Startup Repair

Hi.
I made the mistake of creating a new partition on my HD with an existing Boot Camp partition. I tried to follow the advice of Loner T in this thread https://discussions.apple.com/thread/6574886, and got made the Windows installation bootable. Upon starting up Windows the screen displayed 'Missing Operating System', I tried doing a Windows Startup Repair using the Windows Installation Media without any luck.
Here is the current state of my hard drive.
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *256.1 GB   disk0
   1:                  Apple_HFS                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            201.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:               Windows_NTFS                         20.0 GB    disk0s4
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 31130/255/63 [500118192 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: AF 1023 254 63 - 1023 254 63 [         1 -     409639] HFS+
2: AF   25 127 15 - 1023 254 63 [    409640 - 393139416] HFS+
*3: AB 1023 254 63 - 1023 254 63 [ 393549056 -    1269536] Darwin Boot
4: 07 1023 254 63 - 1023 254 63 [ 461056000 -   39061504] HPFS/QNX/AUX
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=256060514304; sectorsize=512; blocks=500118192
gpt show: /dev/disk0: MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: error: bogus map
gpt show: unable to open device '/dev/disk0': Undefined error: 0
sudo dd if=/dev/disk0s4 count=1 2>/dev/null | hexdump -C
00000000 80 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |.. . . . . . . .|
00000010 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
00000140 04 00 00 00 02 01 00 0c 00 00 78 2e 50 15 00 00 |..........x.P...|
00000150 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 |.. .............|
00000160 00 00 00 00 00 00 8a 00 78 2e 50 15 00 03 00 00 |........x.P.....|
00000170 01 00 03 00 35 35 09 00 00 00 3e 00 8c 09 00 00 |....55....>.....|
00000180 76 01 00 00 15 00 02 00 91 77 1c 00 00 00 02 01 |v........w......|
00000190 c9 b5 04 00 01 00 02 00 2c 00 00 00 8c 09 00 00 |........,.......|
000001a0 76 01 00 00 15 00 00 01 00 00 1e 00 00 00 00 01 |v...............|
000001b0 00 00 00 00 41 00 03 00 fb 03 00 00 0c 00 20 00 |....A......... .|
000001c0 10 00 f8 03 35 35 09 00 01 d2 46 00 00 c3 29 0b |....55....F...).|
000001d0 23 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |#. . . . . . . .|
000001e0 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
00000200

Please download GPT Fdisk (http://sourceforge.net/projects/gptfdisk/) and Testdisk (http://www.cgsecurity.org/wiki/TestDisk_Step_By_Step).
1. Your GPT is corrupt.
2. The MBR is incorrect.
3. You do not have a valid NTFS header.
You need to run Testdisk first to find the correct NTFS header. Please see http://imgur.com/a/PjmnK for the Testdisk screens.

[Desktop] Return the possibility to launch Spotify minimized to tray upon Windows logon

You returned the possibility to minimize Spotify to tray by clicking the close button in version 1.0.7 and I am eternally grateful for that.Now it only lacks one more thing - add a fourth option to the "Open Spotify automatically after you log into the computer" setting.Currently there are 3 options - "Minimized", "Yes" and "No". The fourth option should be "Minimized to tray".I want to be able to start listening to music just by pressing the Play button on my keyboard; many times I don't even open the Spotify window (I do that only to change the playlist or perform a search), so I don't need the Spotify window taking space in my taskbar upon Windows logon.In version 0.9.x it was possible to achieve this behaviour, so I think this functionality should be retained.An alternative to adding the fourth option would be that once I choose the "Minimized" startup option, it would automatically decide whether it will launch minimized to taskbar or to the tray, based on the value of the "Close button should minimize the Spotify window to the tray" setting - if I remember correctly, this was the way it behaved in version 0.9.x.

Updated: 2015-06-18

Boots to windows startup screen, flashes blue screen, restarts and repeats

HP ENVY H8-1414 Product #H3Z00AAR
Windows 7 Ultimate 64-bit
Alright, so here is my issue. I turn on my pc and it gets as far as the windows startup screen, flashes a blue screen error for about half of a second and then restarts it self. My HDD is recognized in the bios. Tried a memory test in diagnostics and it passes. Tried a hard disc check and it passes the SMART check but fails the Long DST with a failure ID of 0GF21L-0006LR-WPVX0K-61C703 (no idea if those a zeros or O's)
I've also tried the startup repair but it did nothing. So I removed the hard drive and tried to use it in a different PC but had the same issue so I figured the hard drive went bad. Then I tried formatting a spare hard drive and installed a fresh copy of windows 7 on it, tried it on a different PC and it works just fine. However, when I try to use that hard drive on the HP ENVY I get the exact same problem even though it worked just fine on a differenct pc.
I purchased this PC refurbished about 3 months ago, the warrenty just ended a week ago. There have been no hardware or software changes on it at all. This thing worked flawlessly last night... I locked the computer before bad and I woke up to this. No power outages over night or anything. It just doesn't make any sense.

Here are the specs for your HP ENVY h8-1414 Desktop Computer. According to the specs, this model came from the factory with Windows 8 installed. The "blue screen" and restart are normal for Windows 7, when it encounters an error, unless you have altered the default settings.
The LONG DST failure is indicative that the hard drive has failed or is about to fail. Unless the hard drive is moved to an identical or very similar computer, Windows will encounter a "blue screen. This is true with the original hard drive moving from the h8 computer to the other computer and the test hard drive from the other other computer moving to the h8 computer.
Try placing the "test" hard drive in the h8 computer and installing Windows 7 from a DVD or USB stick. If you have any problems, please post back with full error messages and screen shots. Also indicate what stage of the install Windows 7 was doing tat the time.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

How to automatically activate a third party application upon MAC startup on OSX 10.9.5?

I am trying to automatically activate a downloaded application upon the startup of the computer. This particular app is one that works in the background.
Thanks for the help

1) Open System Preferences -> Users & Groups, then select your account.
2) Select "Login items" and click "+" button to select application.
3) Check out "Hide" checkbox.

HP G62 Windows Startup error recovery Failure

Notebook:
HP G62 - 228CL
Running Windows 7 64-bit
Hello everyone, I need a bit of help.
My computer will boot windows 7. When I start it up, it tries to boot up. I then get a Windows failed to boot message on the windows error recovery screen and asks me if I would like to use Windows Startup Repair Tool to fix the Problem. But the tool never starts up. It just leads to a windows background and does nothing. I have also tried using f11 System recovery but it does nothing.

Hi,
Firstly, regarding your existing files.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Secondly, regarding the replacement of the Hard Drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 52 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - the procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Best regards and happy holidays,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Program start/restart when windows startup

Hi, I have a java program which I currently compile and run using "Command Prompt".
However, I would like my program start running every time the window startup. How can I do that?
Thanks in advance.

http://jakarta.apache.org/commons/daemon/
http://wrapper.tanukisoftware.org/doc/english/introduction.html

Is it possible to call a java control upon server startup

I have a java control that creates business rules for validation of files submitted by users. This control
makes many calls to db controls and performs a lot of
fetch operations . Is it possible to invoke this control
upon server startup and cache the results

In the current release(8.1), calling controls from a plain Java class is not supported. Controls can only be invoked from a any one of the following Workshop components JWS/JPD/JPFs/or another control.
Hope this helps.
Raj Alagumalai

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

At Windows startup it tells me that it can not find zchvwceaw.dll

After windows loads a box pops up on the desktop titled: RunDLL In the box is a message: X There was a problem starting
C:\Windows\system32\config\systemprofile\AppData\Roaming\Mozilla\Mozilla\zchvwceaw.dll
I have uninstalled Firefox and the box still pops up at windows startup. I reinstalled Firefox and the box is still there telling me it can not find zchvwceaw.dll. I have Firefox 11. Firefox seems to run fine. How do I get rid of this box.

It appears that your computer is infected with the "Happili Redirect" virus:
*See --> http://www.prevx.com/filenames/1436994383169830791-X1/ZCHVWCEAW.DLL.html
Scan your system thoroughly with as many malware scanners as possible:
*See --> [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20Malware Is my Firefox problem the result of Malware]
*See (near the bottom of the above page) --> [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20Malware#w_how-do-i-get-rid-of-malware How to I get rid of Malware]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How to install load tomcat automatically on windows startup.

hi i want to load tomcat automatically on windows startup. right now if i want to start tomcat i have to run startup.bat. please help me.

Hi, When you install tomcat, you can choose to do so "as a service". Then there wont be no startup.bat. then you can see your tomcat as a service under Services
Good luck to you

How to disable iCloud on Windows startup

Hello,
I want to disable iCloud on Windows startup. How do I do that?
I already tried these steps:
1. msconfig > uncheck the service
2. CCleaner > uncheck the service
Unfortunately it enables it itself again, everytime.
Google couldn't help me with this issue.
Thanks in advance!
Fred

Use iCloud control panel version 2.1.2 from here: http://support.apple.com/kb/DL1687.

Synaptic TouchPad is deactivate​d upon Windows 7 Startup

Similar Messages

Maybe you are looking for

Synaptic TouchPad is deactivated upon Windows 7 Startup