Synaptic touchpad not reconizing

input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input1
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 528.971] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 528.971] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 528.971] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 528.971] (II) LoadModule: "synaptics"
[ 528.971] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 528.971] (II) Module synaptics: vendor="X.Org Foundation"
[ 528.971] compiled for 1.8.0.902, module version = 1.2.2
[ 528.971] Module class: X.Org XInput Driver
[ 528.971] ABI class: X.Org XInput driver, version 9.0
[ 528.971] (II) Synaptics touchpad driver version 1.2.2
[ 528.971] (**) Option "Device" "/dev/input/event6"
[ 528.971] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 528.971] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 528.971] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 528.971] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 528.971] (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 528.971] (**) Option "SHMConfig" "true"
[ 528.971] (**) Option "MaxTapMove" "2000"
[ 528.971] (**) Option "VertEdgeScroll" "true"
[ 528.971] (**) Option "VertTwoFingerScroll" "true"
[ 528.971] (**) Option "HorizTwoFingerScroll" "true"
[ 528.971] (**) Option "TapButton1" "1"
[ 528.971] (**) Option "CircularScrolling" "true"
[ 528.971] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 528.971] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 528.971] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 528.971] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 528.971] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 528.972] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 528.972] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 528.972] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 528.972] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 528.972] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 528.972] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 528.972] (II) Synaptics touchpad driver version 1.2.2
[ 528.972] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 528.972] (**) Option "Device" "/dev/input/mouse0"
[ 528.972] (**) Option "SHMConfig" "true"
[ 528.972] (**) Option "MaxTapMove" "2000"
[ 528.972] (**) Option "VertEdgeScroll" "true"
[ 528.972] (**) Option "VertTwoFingerScroll" "true"
[ 528.972] (**) Option "HorizTwoFingerScroll" "true"
[ 528.972] (**) Option "TapButton1" "1"
[ 528.972] (**) Option "CircularScrolling" "true"
[ 528.993] Query no Synaptics: 6003C8
[ 528.993] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 528.993] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 528.993] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 528.993] (II) UnloadModule: "synaptics"
[ 538.427] (II) Power Button: Close
[ 538.427] (II) UnloadModule: "evdev"
[ 538.427] (II) Video Bus: Close
[ 538.427] (II) UnloadModule: "evdev"
[ 538.427] (II) Power Button: Close
[ 538.427] (II) UnloadModule: "evdev"
[ 538.427] (II) Sleep Button: Close
[ 538.427] (II) UnloadModule: "evdev"
[ 538.427] (II) AT Translated Set 2 keyboard: Close
[ 538.427] (II) UnloadModule: "evdev"
[ 538.427] (II) UnloadModule: "synaptics"
Sorry guys I did not want to post but I am getting nowhere. I have used all the configs that wiki has suggested and disabled all that is suggested here http://andreascarpino.it/2010/04/xorg-1 … iguration/ and a few others on the forum (using second one down as current synpatics).
Any help is greatly appreciated. The touchpad worked on all previous versions of Xorg mainly with hal.

Thanks for the response.
I am using dwm, I have found the mouse is actually invisible instead of not working. I have tried to rollback my kernel with no success unfortunately too many deps for other programs. I have also tried to rollback xorg with again no luck keeps saying evdev is a conflict when it's uninstalled.
I have also tried fbdev and vesa but both make my screen go but I can see the mouse in all the fuzzyness.

Similar Messages

TouchSmart m6-k022dx Sleekbook Synaptic Touchpad not working

Hello,
A couple days ago, the touchpad on my TouchSmart m6 sleekbook stopped working with no apparent cause.
Things I've tried
Disabling and re-enabling touchpad through built in synaptic software
Uninstalling driver and restart computer (automatically reinstalling it)
Uninstalling from add/remove programs, and redownloading from HP website
What should i I do?

@hm8 ,
Hello and thank you for posting on the HP support forums.
First thing you will want to try is a system restore to before you noticed the issue.
HP PCs - Using Microsoft System Restore (Windows 8)
This next link may be help as well.
HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

[Solved] Synaptic Touchpad not working

Today, I noticed my touchpad no longer works. Whether the mouse is plugged in or not, moving my fingers on the touchpad will not get the cursor to do anything. At least two USB mouses do work, however. Device manager says that driver is ok. I uninstalled anyways; the Toshiba site for my laptop gave me the old driver to d/l, which I did and installed. Rebooted, and still same problem. I used the flash card and pressed Fn+F9. It has the touchpad as enabled. Any suggestions?

The only other thing we can do that you've maybe not done without going for a full recovery is try the driver shown below which is probably the OEM one you have . However, try it anyway. Uninstall the current one using Control Panel and then download and install this one: L740 Synaptics Driver C.B. P.S. Please double check this part of the model number: <ES5.0>. I've never seen anything like that. And is this a Mexico or Latin America machine by any chance?

MacBookPro Upgrade to 10.4.10 - Keyboard/Mouse/Touchpad Not reconized

Hi all-
I have a very strange problem with my MBP. I've just come back from Europe, so I decided to upgrade my system to 10.4.10 and the security upgrade from june/july (I don't really remember).
The installation went smoothly, except ONE BIIIIG problem.
After the reboot, my OS doesn't reconize anymore my Keyboard/touchpad or even my external mouse. In fact, it seems that nothing is powered anymore. The caps lock button doesn't light.
I tried to boot on the backup DVD and repair autorization. There my keyboard and my mouse are working.
I'm using now my Vista bootcamp partition. Keyboard/mouse and touchpad working perfectly.
Any help would be greatly appreciated. This is my work laptop (it's why I waited so long to upgrade, to be sure).

I am experiencing a Bluetooth linking problem with my Titanium PB, using a D-Link DB-120 adapter, and my Logitech MX900 mouse. Oddly enough, the Logitech Cordless Elite keyboard works fine with my system. Only the mouse fails to link (it pairs just fine). Like other people on this forum, the linking problem developed in the upgrade from 10.4.3 to 10.4.4.
The mouse cannot link automatically. I have that sometimes unplugging the D-Link adapter causes the mouse to automatically link. Also, toggling discoverable off->on->off causes the mouse to link. Also, using the keyboard first will cause auto linking, and the mouse follows.
Trashing preferences, or leaving "discoverable" in a particular state has no effect on the linking problem. Rather, a state change in "discoverable" seems to initiate linking. This may a caused by a coding bug at Apple, since nothing else has changed. Everything worked as expected under 10.4.3.
Hopefully Apple with fix this linking problem, and Logitech will market a 100% Apple compatible keyboard soon. Good gracious - their bluetooth keyboards are already 95% compatible - is the extra 5% that costly?

G6 2006-tx: synaptic touchpad is not listed in mice and other pointind device (device manager)

hi,
i just upgrade my window 7 home to window 8 pro... and i am now unable to scroll through my touch pad.
before upgrading, my touch pad was working properly, but now its only work as mouse to click items.
neither it scrolling nor zooming using two fingers.
plz tell me, should i have to reinstall my synaptic touch pad drivers?
plz provide me link
model: hp pavillion g6 2006-tx

Hello,
I see that you're having an issue with the touchpad not showing up in the device manager. This could be because you're missing the drivers for the touchpad in Win8.
Here are the drivers you will need to install. Also, go ahead and follow this document if you're having any other issues with the touchpad.
This document has several sections that will help you will every possible issue.
If you have any other questions let me know. Please let me know the outcome to this also.
THX

Synaptic Touchpad drivers

For some time now my mouse hadnt been working so I was using an external mouse which worked correctly, but I gave the mouse out and I am trying to restore my touchpad on my computer so I went to the mouse property then I clicked on the software tab and realised there was no driver for my mouse.
Where can I find the synaptic touchpad drivers for Hp Pavilion dv7 2045eo? and If it is not a problem with the driver where can I find its solution?

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with the Touchpad of your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please re-install the touchpad drivers from HP Website in order to resolve the issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Touchpad not recognized on Asus Zenbook UX303LA

Hello,
I recently purchased an Asus Zenbook UX303LA and just installed Arch on it today. So far everything has been working (display, wireless, audio), but I'm having some issues with the trackpad. It doesn't appear to be recognized correctly and is showing up as a PS/2 Logitech Wheel Mouse. I'm not sure how to find out what modules I need, or even what the logical next steps are in debugging. Any help would be appreciated!
39: PS/2 00.0: 10500 PS/2 Mouse
[Created at input.249]
Unique ID: AH6Q.U5GX9Ignjc0
Hardware Class: mouse
Model: "PS/2 Logitech Wheel Mouse"
Vendor: 0x0002
Device: 0x0001 "PS/2 Logitech Wheel Mouse"
Compatible to: int 0x0210 0x0003
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event12, /dev/input/by-path/platform-i8042-serio-4-event-mouse, /dev/input/by-path/platform-i8042-serio-4-mouse
Device Number: char 13:63 (char 13:33)
Driver Info #0:
Buttons: 3
Wheels: 0
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Here is lspci and lsusb:
$ lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 8 Series Thermal (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:07dc Intel Corp.
Bus 001 Device 003: ID 03eb:8a31 Atmel Corp.
Bus 001 Device 002: ID 064e:9700 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
$ dmesg
[ 5.723709] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input17
I'm not sure what else would be of use for debugging, but I'm happy to try anything.

Hi,
By now, the drivers have been merged into mainline linux. I got my zenbook ux303ln yesterday and decided to try it out. I've got some problems with it. The mouse cursor just stays in the middle of the screen and cannot be moved. I can click though. I got the kernel from the mainline AUR repo, version 4.0-rc3. Tested it both under gnome and cinnamon.
Has someone else got it working with the mainline kernel? Does anyone have some suggestions on what I should try next?
dmesg output with 3.18 kernel:
[ 1.636871] input: PS/2 FocalTech FocalTech Touchpad in mouse emulation mode as /devices/platform/i8042/serio4/input/input17
With mainline kernel:
[ 1.236838] input: FocalTechPS/2 FocalTech FocalTech Touchpad as /devices/platform/i8042/serio4/input/input15
EDIT: Appending xorg output. Seems ok to me though.
[ 8.416]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 8.416] X Protocol Version 11, Revision 0
[ 8.416] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 8.416] Current Operating System: Linux shigeru 4.0.0-1-mainline #1 SMP PREEMPT Fri Mar 13 16:53:42 UTC 2015 x86_64
[ 8.416] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=UUID=d2590669-5d13-4b8c-8e9e-0fdd61ff24db rw quiet
[ 8.416] Build Date: 22 February 2015 12:50:32PM
[ 8.416]
[ 8.416] Current version of pixman: 0.32.6
[ 8.416] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 8.416] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.416] (==) Log file: "/home/karl/.local/share/xorg/Xorg.0.log", Time: Sat Mar 14 14:46:21 2015
[ 8.421] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 8.421] (==) No Layout section. Using the first Screen section.
[ 8.421] (==) No screen section available. Using defaults.
[ 8.421] (**) |-->Screen "Default Screen Section" (0)
[ 8.421] (**) | |-->Monitor "<default monitor>"
[ 8.422] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.422] (==) Automatically adding devices
[ 8.422] (==) Automatically enabling devices
[ 8.422] (==) Automatically adding GPU devices
[ 8.426] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 8.426] Entry deleted from font path.
[ 8.426] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 8.427] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.427] Entry deleted from font path.
[ 8.427] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.428] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.428] Entry deleted from font path.
[ 8.428] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.428] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 8.428] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.428] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.428] (II) Loader magic: 0x815d80
[ 8.428] (II) Module ABI versions:
[ 8.428] X.Org ANSI C Emulation: 0.4
[ 8.428] X.Org Video Driver: 19.0
[ 8.428] X.Org XInput driver : 21.0
[ 8.428] X.Org Server Extension : 9.0
[ 8.429] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 8.430] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 8.431] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 8.432] (--) PCI:*(0:0:2:0) 8086:1616:1043:183d rev 9, Mem @ 0xf5000000/16777216, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 8.432] (--) PCI: (0:3:0:0) 10de:1341:1043:12df rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 8.432] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8.432] (II) LoadModule: "glx"
[ 8.433] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.445] (II) Module glx: vendor="X.Org Foundation"
[ 8.445] compiled for 1.17.1, module version = 1.0.0
[ 8.445] ABI class: X.Org Server Extension, version 9.0
[ 8.445] (==) AIGLX enabled
[ 8.445] (==) Matched intel as autoconfigured driver 0
[ 8.445] (==) Matched intel as autoconfigured driver 1
[ 8.445] (==) Matched modesetting as autoconfigured driver 2
[ 8.445] (==) Matched fbdev as autoconfigured driver 3
[ 8.445] (==) Matched vesa as autoconfigured driver 4
[ 8.445] (==) Assigned the driver to the xf86ConfigLayout
[ 8.445] (II) LoadModule: "intel"
[ 8.445] (WW) Warning, couldn't open module intel
[ 8.445] (II) UnloadModule: "intel"
[ 8.445] (II) Unloading intel
[ 8.445] (EE) Failed to load module "intel" (module does not exist, 0)
[ 8.445] (II) LoadModule: "modesetting"
[ 8.445] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 8.446] (II) Module modesetting: vendor="X.Org Foundation"
[ 8.446] compiled for 1.17.1, module version = 1.17.1
[ 8.446] Module class: X.Org Video Driver
[ 8.446] ABI class: X.Org Video Driver, version 19.0
[ 8.446] (II) LoadModule: "fbdev"
[ 8.446] (WW) Warning, couldn't open module fbdev
[ 8.446] (II) UnloadModule: "fbdev"
[ 8.446] (II) Unloading fbdev
[ 8.446] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.446] (II) LoadModule: "vesa"
[ 8.446] (WW) Warning, couldn't open module vesa
[ 8.446] (II) UnloadModule: "vesa"
[ 8.446] (II) Unloading vesa
[ 8.446] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.446] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 8.446] (++) using VT number 1
[ 8.446] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 8.447] (II) modeset(0): using drv /dev/dri/card0
[ 8.447] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 8.447] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.447] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 8.447] (==) modeset(0): RGB weight 888
[ 8.447] (==) modeset(0): Default visual is TrueColor
[ 8.447] (II) Loading sub module "glamoregl"
[ 8.447] (II) LoadModule: "glamoregl"
[ 8.447] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 8.455] (II) Module glamoregl: vendor="X.Org Foundation"
[ 8.455] compiled for 1.17.1, module version = 1.0.0
[ 8.455] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.455] (II) glamor: OpenGL accelerated X.org driver based.
[ 8.490] (II) glamor: EGL version 1.4 (DRI2):
[ 8.505] (II) modeset(0): glamor initialized
[ 8.505] (II) Loading sub module "dri2"
[ 8.505] (II) LoadModule: "dri2"
[ 8.505] (II) Module "dri2" already built-in
[ 8.505] (II) modeset(0): Output eDP-0 has no monitor section
[ 8.505] (II) modeset(0): Output DisplayPort-0 has no monitor section
[ 8.505] (II) modeset(0): Output HDMI-0 has no monitor section
[ 8.506] (II) modeset(0): Output HDMI-1 has no monitor section
[ 8.506] (II) modeset(0): EDID for output eDP-0
[ 8.506] (II) modeset(0): Manufacturer: CMN Model: 1361 Serial#: 0
[ 8.506] (II) modeset(0): Year: 2014 Week: 7
[ 8.506] (II) modeset(0): EDID Version: 1.4
[ 8.506] (II) modeset(0): Digital Display Input
[ 8.506] (II) modeset(0): 8 bits per channel
[ 8.506] (II) modeset(0): Digital interface is DisplayPort
[ 8.506] (II) modeset(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 8.506] (II) modeset(0): Gamma: 2.20
[ 8.506] (II) modeset(0): No DPMS capabilities specified
[ 8.506] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 8.506] (II) modeset(0): First detailed timing is preferred mode
[ 8.506] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 8.506] (II) modeset(0): redX: 0.640 redY: 0.340 greenX: 0.308 greenY: 0.615
[ 8.506] (II) modeset(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 8.506] (II) modeset(0): Manufacturer's mask: 0
[ 8.506] (II) modeset(0): Supported detailed timing:
[ 8.506] (II) modeset(0): clock: 138.8 MHz Image Size: 293 x 165 mm
[ 8.506] (II) modeset(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
[ 8.506] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
[ 8.506] (II) modeset(0): Supported detailed timing:
[ 8.506] (II) modeset(0): clock: 92.5 MHz Image Size: 293 x 165 mm
[ 8.506] (II) modeset(0): h_active: 1920 h_sync: 1966 h_sync_end 1996 h_blank_end 2080 h_border: 0
[ 8.506] (II) modeset(0): v_active: 1080 v_sync: 1082 v_sync_end 1086 v_blanking: 1112 v_border: 0
[ 8.506] (II) modeset(0): CMN
[ 8.506] (II) modeset(0): N133HSE-EA3
[ 8.506] (II) modeset(0): EDID (in hex):
[ 8.506] (II) modeset(0): 00ffffffffffff000dae611300000000
[ 8.506] (II) modeset(0): 07180104a51d117802ce85a3574e9d26
[ 8.506] (II) modeset(0): 12505400000001010101010101010101
[ 8.506] (II) modeset(0): 010101010101363680a0703820402e1e
[ 8.506] (II) modeset(0): 240025a510000018242480a070382040
[ 8.506] (II) modeset(0): 2e1e240025a510000018000000fe0043
[ 8.506] (II) modeset(0): 4d4e0a202020202020202020000000fe
[ 8.506] (II) modeset(0): 004e3133334853452d4541330a2000a1
[ 8.506] (II) modeset(0): Printing probed modes for output eDP-0
[ 8.506] (II) modeset(0): Modeline "1920x1080"x60.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 8.506] (II) modeset(0): Modeline "1920x1080"x40.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 8.506] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 8.506] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 8.506] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 8.506] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 8.506] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 8.506] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 8.506] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 8.506] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 8.506] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 8.506] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 8.506] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 8.506] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 8.506] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 8.506] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 8.506] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 8.506] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 8.506] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 8.506] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 8.506] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 8.506] (II) modeset(0): EDID for output DisplayPort-0
[ 8.506] (II) modeset(0): EDID for output HDMI-0
[ 8.507] (II) modeset(0): EDID for output HDMI-1
[ 8.507] (II) modeset(0): Output eDP-0 connected
[ 8.507] (II) modeset(0): Output DisplayPort-0 disconnected
[ 8.507] (II) modeset(0): Output HDMI-0 disconnected
[ 8.507] (II) modeset(0): Output HDMI-1 disconnected
[ 8.507] (II) modeset(0): Using exact sizes for initial modes
[ 8.507] (II) modeset(0): Output eDP-0 using initial mode 1920x1080
[ 8.507] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 8.507] (==) modeset(0): DPI set to (96, 96)
[ 8.507] (II) Loading sub module "fb"
[ 8.507] (II) LoadModule: "fb"
[ 8.507] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 8.508] (II) Module fb: vendor="X.Org Foundation"
[ 8.508] compiled for 1.17.1, module version = 1.0.0
[ 8.508] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.508] (==) Depth 24 pixmap format is 32 bpp
[ 8.564] (==) modeset(0): Backing store enabled
[ 8.564] (==) modeset(0): Silken mouse enabled
[ 8.564] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 8.565] (==) modeset(0): DPMS enabled
[ 8.565] (II) modeset(0): [DRI2] Setup complete
[ 8.565] (II) modeset(0): [DRI2] DRI driver: i965
[ 8.565] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 8.579] (--) RandR disabled
[ 8.598] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 8.598] (II) AIGLX: enabled GLX_ARB_create_context
[ 8.598] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 8.598] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 8.598] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 8.598] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 8.598] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 8.598] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 8.598] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 8.598] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 8.598] (II) AIGLX: Loaded and initialized i965
[ 8.598] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.601] (II) modeset(0): Setting screen physical size to 508 x 285
[ 8.638] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 8.638] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 8.638] (II) LoadModule: "evdev"
[ 8.638] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 8.640] (II) Module evdev: vendor="X.Org Foundation"
[ 8.640] compiled for 1.16.2, module version = 2.9.1
[ 8.640] Module class: X.Org XInput Driver
[ 8.640] ABI class: X.Org XInput driver, version 21.0
[ 8.641] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 12 paused 0
[ 8.641] (II) Using input driver 'evdev' for 'Power Button'
[ 8.641] (**) Power Button: always reports core events
[ 8.641] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 8.641] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 8.641] (--) evdev: Power Button: Found keys
[ 8.641] (II) evdev: Power Button: Configuring as keyboard
[ 8.641] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 8.641] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.641] (**) Option "xkb_rules" "evdev"
[ 8.641] (**) Option "xkb_model" "pc104"
[ 8.641] (**) Option "xkb_layout" "us"
[ 8.654] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 8.654] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 8.655] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 13 paused 0
[ 8.655] (II) Using input driver 'evdev' for 'Video Bus'
[ 8.655] (**) Video Bus: always reports core events
[ 8.655] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 8.655] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 8.655] (--) evdev: Video Bus: Found keys
[ 8.655] (II) evdev: Video Bus: Configuring as keyboard
[ 8.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event9"
[ 8.655] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 8.655] (**) Option "xkb_rules" "evdev"
[ 8.655] (**) Option "xkb_model" "pc104"
[ 8.655] (**) Option "xkb_layout" "us"
[ 8.655] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 8.655] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 8.655] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 14 paused 0
[ 8.655] (II) Using input driver 'evdev' for 'Video Bus'
[ 8.655] (**) Video Bus: always reports core events
[ 8.655] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 8.655] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 8.655] (--) evdev: Video Bus: Found keys
[ 8.655] (II) evdev: Video Bus: Configuring as keyboard
[ 8.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input18/event10"
[ 8.655] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 8.655] (**) Option "xkb_rules" "evdev"
[ 8.655] (**) Option "xkb_model" "pc104"
[ 8.655] (**) Option "xkb_layout" "us"
[ 8.656] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 8.656] (II) No input driver specified, ignoring this device.
[ 8.656] (II) This device may have been added with another device file.
[ 8.656] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 8.656] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 8.656] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[ 8.656] (II) Using input driver 'evdev' for 'Sleep Button'
[ 8.656] (**) Sleep Button: always reports core events
[ 8.656] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 8.656] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 8.656] (--) evdev: Sleep Button: Found keys
[ 8.656] (II) evdev: Sleep Button: Configuring as keyboard
[ 8.656] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 8.656] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 8.656] (**) Option "xkb_rules" "evdev"
[ 8.656] (**) Option "xkb_model" "pc104"
[ 8.656] (**) Option "xkb_layout" "us"
[ 8.657] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 8.657] (II) No input driver specified, ignoring this device.
[ 8.657] (II) This device may have been added with another device file.
[ 8.657] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 8.657] (II) No input driver specified, ignoring this device.
[ 8.657] (II) This device may have been added with another device file.
[ 8.657] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 8.657] (II) No input driver specified, ignoring this device.
[ 8.657] (II) This device may have been added with another device file.
[ 8.657] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event12)
[ 8.657] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 8.658] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 16 paused 0
[ 8.658] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 8.658] (**) USB2.0 UVC HD Webcam: always reports core events
[ 8.658] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event12"
[ 8.658] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x64e Product 0x9700
[ 8.658] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 8.658] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 8.658] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event12"
[ 8.658] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[ 8.658] (**) Option "xkb_rules" "evdev"
[ 8.658] (**) Option "xkb_model" "pc104"
[ 8.658] (**) Option "xkb_layout" "us"
[ 8.658] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 8.658] (II) No input driver specified, ignoring this device.
[ 8.658] (II) This device may have been added with another device file.
[ 8.658] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 8.658] (II) No input driver specified, ignoring this device.
[ 8.658] (II) This device may have been added with another device file.
[ 8.658] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event5)
[ 8.658] (II) No input driver specified, ignoring this device.
[ 8.658] (II) This device may have been added with another device file.
[ 8.658] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 8.658] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 8.659] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
[ 8.659] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 8.659] (**) Asus WMI hotkeys: always reports core events
[ 8.659] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 8.659] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 8.659] (--) evdev: Asus WMI hotkeys: Found keys
[ 8.659] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 8.659] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
[ 8.659] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[ 8.659] (**) Option "xkb_rules" "evdev"
[ 8.659] (**) Option "xkb_model" "pc104"
[ 8.659] (**) Option "xkb_layout" "us"
[ 8.659] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 8.659] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 8.659] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[ 8.659] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 8.659] (**) AT Translated Set 2 keyboard: always reports core events
[ 8.659] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 8.659] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 8.659] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 8.659] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 8.659] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 8.659] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 8.659] (**) Option "xkb_rules" "evdev"
[ 8.659] (**) Option "xkb_model" "pc104"
[ 8.659] (**) Option "xkb_layout" "us"
[ 8.660] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/event11)
[ 8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 8.660] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[ 8.660] (II) Using input driver 'evdev' for 'FocalTechPS/2 FocalTech FocalTech Touchpad'
[ 8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: always reports core events
[ 8.660] (**) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Device: "/dev/input/event11"
[ 8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Vendor 0x2 Product 0x12
[ 8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found 1 mouse buttons
[ 8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found absolute axes
[ 8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found absolute multitouch axes
[ 8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found x and y absolute axes
[ 8.660] (--) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Found absolute touchpad.
[ 8.660] (II) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: Configuring as touchpad
[ 8.660] (**) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: YAxisMapping: buttons 4 and 5
[ 8.660] (**) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 8.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input16/event11"
[ 8.660] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech FocalTech Touchpad" (type: TOUCHPAD, id 13)
[ 8.660] (II) evdev: FocalTechPS/2 FocalTech FocalTech Touchpad: initialized for absolute axes.
[ 8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) keeping acceleration scheme 1
[ 8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration profile 0
[ 8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration factor: 2.000
[ 8.660] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration threshold: 4
[ 8.661] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/mouse0)
[ 8.661] (II) No input driver specified, ignoring this device.
[ 8.661] (II) This device may have been added with another device file.
[ 8.661] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 8.661] (II) No input driver specified, ignoring this device.
[ 8.661] (II) This device may have been added with another device file.
[ 9.195] (II) modeset(0): EDID vendor "CMN", prod id 4961
[ 9.195] (II) modeset(0): Printing DDC gathered Modelines:
[ 9.195] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 9.195] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
[ 10.039] (II) modeset(0): EDID vendor "CMN", prod id 4961
[ 10.039] (II) modeset(0): Printing DDC gathered Modelines:
[ 10.039] (II) modeset(0): Modeline "1920x1080"x0.0 138.78 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (66.7 kHz eP)
[ 10.039] (II) modeset(0): Modeline "1920x1080"x0.0 92.52 1920 1966 1996 2080 1080 1082 1086 1112 -hsync -vsync (44.5 kHz e)
EDIT2:
The error was that I had not installed xf86-input-synaptics. I didn't think this would be needed since it isn't a synaptic touchpad. A bit confusing. Now everything works great, I really recommend trying the mainline kernel if you got a zenbook UX303.
Regards,
Karl
Last edited by Hylleman (2015-03-14 16:39:40)

HP Pavilion g6-1c39ca touchpad not working

Hi, so i turned on my laptop today to find my touchpad not working, I did not change any of the settings. I am unable to enable the touchpad by tapping the cirlcle in the corner of the touchpad as it is broken. I tried to go to control panel-mouse-hardware and sound-mouse but there is no tab for device settings. After reading a couple of questions in the support forum I then downloaded the synaptic touchpad driver from hp support, but it could not be intalled correctly on my computer. Can someone please help me with this issue.

Hi @thomasand ,
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your TouchPad/ClickPad has stopped working. The round button in the upper left corner of the TouchPad is non functional. You went to the control panel-mouse-hardware and sound-mouse but there is no tab for device settings.
You tried downloading the software and drivers but were unable to install them.
Here is a link to HP Notebook PCs - Using and Configuring the TouchPad (Windows 7 and Vista) that may help.
If you still have this difficulty please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Synaptic TouchPad is deactivated upon Windows 7 Startup

Hello Everybody
I am using Lenovo G430 4152-C5Q Laptop.
I have been using Windows 7 RC since two months.
Today i updated all the software and drivers to Windows 7 Versions after noticing it in Lenovo support page.
Now Synaptic TouchPad is not working upon Windows 7 Startup.
Everytime i have to enable / disable TouchPad using the function keys to use it.
But if i uninstall the Synaptic TouchPad driver, the TouchPad is working well automatically upon every Windows 7 startup.
But don't recommend that option as Windows 7 Built-In driver is not utilizing all features of the TouchPad.

Yeah, i am very sure.
As Alps was unable to provide any additional features to my touchpad.
Moreover i am able to utilize all the features supported by the Synaptic driver.

HP g6-1b68nr NEED SYNAPTIC TOUCHPAD INFO

SYNAPTIC TOUCHPAD ADVICE FOR g6-1b68nr -- Laptops still function great! EXCEPT---
It's 3 yrs since I purchsed 2 exactly the same g6-1b68nr Pavilion Notebooks. One I used myself and it has SYNAPTIC TOUCHPAD functions intact; works great.
The other I just started using again (differnt house) but Synptics are missing even in the Search menu.
Looking for the right HP or other safe link, to reinstall software or maybe, all that's needed is Driver Update? Not sure.
Thnx for any advice. Today is 10 Dec. 2014
This question was solved.
View Solution.

Hi:
Below is the link to the support and driver page for your notebook.
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&os=4063&product=5128912&sw_lang=
The touchpad driver can be found under the keyboard and mouse driver section for the operating system you are running.

Synaptic device not found!

hi guys
my lenovo z500 show this error when installing synaptic
and i have to go this path on cd driver and install this file
Link to picture
but i think synaptic driver no install completely
on my frind z500 laptop install so good. see:
Link to picture
but on my z500 laptop not install synaptic right click pad and not any smb port.:
Link to picture
else elan soft work so good with 2,3,4,5 fingers but two right click tap does not work!
synaptic does not work!
also i update touch pad driver
os:win8 64
pls help me.
thx
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Hi! LenBlazerThank you My dear friend lionf3lionf3 and me have lenovo z500 club in p30world.com ( lionf3 create it!)many member of club use synaptic for their z500 and perfectly use it but show that error for some members"""""we work with z500 touchpad all day long""""we use elan on z500 but when we want right click with two fingers, elan need push touchpad with pressurein synaptic you just touch your touchpad with two fingers to use right clickso do you have any solution for me?you can see club by google translatelenovo z500 clubtwo right click tap problem on lenovo z500please Follow this problem we have became tired to working with elan and following this problem to any websiteswe hope thx vey much

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

IPOD not reconized by windows, nor iTunes

My iPod is blocked, following password mismatch 3 times....
I tried to connect to iTunes, and always asking for password to open the iPOD.
Connected to iTunes, unable to restore, as not reconized by both Windows and iTunes.
Any idea how to solve this?
Thanks

erfva,
If you can get the iPod recognized in iTunes, you can always attempt to restore it: http://support.apple.com/kb/HT1339
However, if it's not recognized in iTunes you can attempt to format it using Disk Mode, using your Windows OS (just like you would format any drive). Here is a good article on what to do if the iPod is not seen in iTunes: http://support.apple.com/kb/TS1373?viewlocale=en_US
Unfortunately beyond that, especially if it's making whirring or clicking sounds, it can be a hardware failure which would require service: http://support.apple.com/kb/TS1382
Hope this helps,
Raleigh

My iPod is not reconized by itunes or my computer help?

Yesterday my ipod was not reconized by my computer, so i restarted it and it worked fine. But today it wont work, i changed cords and i restarted my computer! it just wont connect. Any ideas??

If you're using a Mac, read these:
iPod missing in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
iPod does not appear in iPod Updater or iTunes in Mac OS X
http://support.apple.com/kb/TS1461
If you're running Windows, read these:
iPod missing in "My Computer" or in iTunes for Windows
http://support.apple.com/kb/TS1369
iPod shows up in Windows but not in iTunes
http://support.apple.com/kb/TS1363

My Imac is not reconizing my Flash Drive

My Imac is not reconizing my Flash Drive

Open Finder Preferences and make sure that the "External disks" boxes are checked in both the General and Sidebar tabs.

Synaptic touchpad not reconizing

Similar Messages

Maybe you are looking for