Synaptics Pointting device Driver installs on an Desktop machine while deploying Windows 7X64 using MDT 2013 Update 1

I am deploying Windows 7X64 on Dell OptiPlex 990 and other desktops. Deployment goes fine but the Synaptics pointing device driver gets installed after the deployment is complete. Also after applying operating system I get a prompt to Run the Synaptics Pointing
Driver setup twice. If I don't click yes to install the TS wont proceed. Its gets worse when I uninstall the Synaptics Device Driver from Appwiz.Cpl and reboot the machine the Keyboard fails with the error Code:29. Above is the screenshot of what I get after
Applying Operating System step. Thanks in Advance.

I have also encountered this in MDT 2013 Lite Touch deployments for Windows 8.1 and I am researching it.
I noted that the Synaptics driver was installed for "SmBus" in Device Manager for a motherboard with an Intel 7 Cxxx Series chipset (Dell Optiplex desktop). The HardwareID's are all PCI\VEN8086...
We use %Model% in our task sequence and have a folder for each model such as "Optiplex 7010" in Out-of-Box Drivers.

Similar Messages

Synaptics pointing device driver not supported

I have a Toshiba C55D-A5392 which was recently "upgraded" by Microsoft to Windows 10. I cannot adjust the "tap or hover over the touchpad" to defeat it from sending a left click. I always removed that "feature" with all previous versions of Windows. When I try to adjust parameters on the Control panel, i only adjusts a few. Ther'e's a link to "more adjustments" but when I click the, I momentarily get the usual presentation for all adjustments, but within a few seconds I get a message that the driver is incompatible with extensions used by the operating system. Will there be a driver for the Synaptics touch pad used in my computer. It's a real pain right now to use. Thanks for any input.

Toshiba does not have a Win 10 Synaptics driver for your model. None of us have any idea what their future plans are in that regard. You might see if Synaptics can help you.

Equium P200 - Using Synaptics Pointing Device - keeps minimising my screen

Just bought the laptop so all the devices should be up to date.
The touchpad uses the Synaptics pointing device and it often closes my screen or minimises it when I'm using it whether it be in my email account or online.
Not sure if relevant but got Vista installed. Have tried to look this fault up but no luck so far. Any help would be gatefully appreciated.
Thanks in advance.

If you have bought your laptop few days ago the first thing you should do is to check all relevant settings and see how that tochpad works. You will see that touchpad has many different settings and I am pretty sure you use accidentally some of them.
There is definitely no fault. I have the same notebook model and have no this fault. Maybe you should disable tap zones.

Multiple USB Device Driver Installations Failing

Windows 7 64 Bit / MSI P965 Platinum Mother Board
I have three USB driver installations failing. I believe this is related to ' USB', because installations of other software unrelated to USB devices install just fine. Might it be a Windows Installer Service, appears to be running fine?
Failing Device Driver Installations;
1) IOGEAR USB 3 PCIe card
Problem: The installer runs part way through the "Preparing to install' process and goes into limbo. I have tried three USB cards by different manufacturers and get the same problem. Tried several Renesas installers, all failed.
Microsoft Windows Installer says: 'Stopped working. Files that help describe the problem: AppCompat.txt, WERInternalMetadata.xml, WERDataCollection failure'.
2) APC Battery Backup 'PowerChute' Software
Problem: : The installer runs part way through the "Preparing to install' process and goes into limbo -or- I get an error message telling me to check the USB connection. APC cable is pulgged into a native port, not a hub. APC has no solution.
3) Logitech Harmony One Remote Software (Finally installed in 'Safe' Mode
Error: : The installer runs part way through the "Preparing to install' process and goes into limbo, but, when I went into 'Safe Mode' the software installed properly. Installation of the other two examples yield the Windows 'can't be installed in safe mode'
Help Appreciated - IM

To rule out a Windows problem, have you tested with a fresh parallel installation?

Device Driver Installation on Virtual PC XP mode

Hi,
I am having Windows 7 Professional setup. I have installed Windows Virtual PC XP Mode on it. I need to access USB for connecting my Windows Embedded device with Visual Studio Platform Builder which has installed in XP mode. Using USB over network
tool i have tried to make the USB device to be accessible from XP mode and tried to install APX USB driver in Virtual PC.
I got this notification from the installation setup "Could not start the Hardware" . Also checked this USB device installation with other XP pc. There it worked fine.
Is there any option to make the USB device accessible from virtual PC ?
Best Regards,
Dinesh

Hi,
The USB device might need to be redirected:
We may take a look at the following article about USB device usage in Virtual PC:
Use a USB device in a virtual machine
To redirect a USB device to a virtual machine
Attach the device to the physical computer and turn on the device.
From the virtual machine window, click USB and then click
Attachdevice name. Windows looks for and tries to install the device driver in the guest operating system. You also can install the driver from the Internet or from a CD.
After the driver is installed, you can use the USB device from within the virtual machine the same way as you would on a physical computer. However, USB devices that are connected using these steps are not shared, so they must be released from one operating
system to be available for use on the other operating system.
To make the USB device available on the host operating system, release it from the virtual machine. From the virtual machine window, click
USB and then click Releasedevice name.
Best regards
Michael Shao
TechNet Community Support

Device Driver Installation

I am trying to install Measurement Studio to develop a new app for work. However when I was installing it the installer required for device driver and I already download it and extract it.
The installer keep giving me the "The specified folder does not contain the correct volume" error. Where ever I change my path it keep showing the same error. So what's the exact path for the folder? or is there any mistakes I made while installing?
Or can anyone just walk me through the correct way to install..? Because I am really confused and lost.
I was using the Visual Studio Express 2012 and I download Measurement Studio 2013 and Device Driver Augest 2013 as it required.
Please let me know if you need any futher information.
Attachments:
browse_file.JPG ‏33 KB
device_install_1.JPG ‏28 KB

Hi cocohot,
Take a look at this Knowledge Base article that explains in more detail what support Measurement Studio has for Visual Studio Express.
http://digital.ni.com/public.nsf/allkb/3EA27E75A342A9EF8625723B007343ED?OpenDocument
It also gives you some good next steps that you'll need in order to manually add files for Measurement Studio.
Hope this helps.
Taylor

Mtp device driver installation on nokia 5800 fails

when i connect my nokia 5800 in media transfer mode, windows try to find the drivers for the mtp device, but it always fails no matter what i have tried. i need to fix this.
Greece Nokia X6 RM-559 v40.0.002

Hi,
I have gotten my Nokia 5800 to work in all connection types.
Firstly, I had updated my phone to the latest firmware available to me via NSU (v31.0.101), and made a back up of my contacts and memory card.
1. Uninstalled Nokia PC suite, Cable driver, and PC connectivity (might not have got the exact names right).
2. Ran the Nokia PC suite cleaner.
3. Restarted the PC.
4. Formatted the memory card.
5. Did a hard reset on the phone (green button + red button + camera button - until country selection pops up during the power up of the phone)
6. Installed Nokia PC suite (latest version).
7. Connected the 5800 to the PC in the default connection, and let all the drivers install.
All the drivers, including the MTP USB device driver installed successfully. To be on the safe side, I changed the connection type from the phone toall the different connections to make sure it installed.
Also run the app update application first before restoring backups and re-installing applications.
Let me know if this helps.
Thanks.
Message Edited by H2_NokUser on 11-Nov-2009 05:38 PM

U550 Synaptics Pointing Device Issue

Something has happened to the Synaptics that it is not being recognized or responding. I can still use the touchpad to move the mouse and click on stuff but I can not use it for zooming or scrolling.
Can someone please help me in figuring out what needs to be done so it will work again properly.
Also on a different note when I use the Fn key to adjust brightness or volume, there is no green meter/bar thing that shows up so I can see what level it is at. Why would this stop working?

http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=909234

How to make Automatically Device driver installation in Win 7/WIn 8 when using RNDIS in Windows Compact

We are developing a precision instrument that measures Temperature, Pressure and humidity used in the pharmaceutical industry.
The Instrument is based on Windows Embedded Compact (7.0)
WE establish a TCP communication vi a USB connection. This is done by the RNDIS Driver.
When we connect the instrument to a PC we have to do the following in Windows:
http://developer.toradex.com/knowledge-base/how-to-install-microsoft-rndis-driver-for-windows-7
The INF that is used is then C:\Windows\inf\rndiscmp.inf
We want this to be executed automatically
The way it is automated is by setting the correct entry’s in the registration database on the Instruments. In Windows CE registration database.
On
http://www.usb.org/developers/defined_class we think we must set Base Class = EFh, SubClass = 04h and Protocol = 01h.
But how is this done in the registry on the device?
Who can help me :-)

Hi Mads,
changes in "rndisfn.h" in public folder have no influance on your project, because those files are not built at all. Visual Studio will use this one anyway (which is already built): C:\WINCE700\public\common\oak\target\armv7\retail\rndisfn.dll
To make use of Microsoft public code, you have to clone this code - that is copy selected source files to BSP folder and adjust DIRS files to include new data in the compilation process.
To clone RNDIS component, copy rndis folder from C:\WINCE700\public\common\oak\drivers\UsbFn\class
to C:\WINCE700\platform\YOUR_BSP\Src\COMMON\USBFN.
Edit source file C:\WINCE700\platform\YOUR_BSP\Src\COMMON\USBFN\rndis\rndisfn\sources:
DOSYSGEN=1
TARGETDEFNAME=RNDISFN
TARGETNAME=RNDISFN
TARGETTYPE=DYNLINK
DLLENTRY=_DllEntryCRTStartup
SOURCES= \
rndisfn.cpp \
TARGETLIBS= \
$(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\ndis.lib \
$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\ceddk.lib \
$(_SYSGENSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib
SOURCELIBS=\
$(SG_OUTPUT_ROOT)\platform\$(_TGTPLAT)\lib\$(_CPUINDPATH)\rndismini2.lib \
$(_PUBLICROOT)\common\oak\lib\$(_CPUINDPATH)\ufnclientlib.lib
Finally, edit C:\WINCE700\platform\YOUR_BSP\Src\COMMON\USBFN\dirs to include your new component (folder) in the build process:
DIRS=\
RNDISKITL \
RNDIS \
System will build now new rndisfn.dll, which will replace the original one in the public directory. I hope I didn't forget anything...

Hp Pavilion dv7, synaptics pointing device not scrolling after windows 10

After upgrading to windows 10 my mouse will not scroll. I have updated the driver, no help. I have uninstalled and reinstalled, no help. I rolled back the driver, no help, I reupdated the driver no help, I deleted the whole synaptics system and redownloaded it from their website no help, reupdate the driver again, no help. I then went on to live help....the technician did an update again....no help. I went onto live help again and technician did a system clean/repair from the command prompt, no help (I then gave up with live help) and yes the vertical scrolling option is ticked in the settings. PLEASE can someone help me.

You don't need to be in Windows to mark the D:\Recovery partition Active. Just boot with a utility cd with the disk management capability. If you don't have one_Scroll down on the page and get>> Bootable CD If you don't have a burning app that can burn an ISO to cd get>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it.
Btw-have you tried booting from his Vista Recovery DVD? With the first disc in the CD/DVD drive power on the laptop and immediately tap Esc to bring up the menu. Then tap F9 Boot options. Use the arrow key to move down & highlight the Optical drive then tap Enter key. (No key is needed with Recovery DVDs)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Alps Pointing-device Driver ver 7.7.1602.320 (G450)

Hi Lenovo team,
I am actually not really understand why your released new version ALPS driver (Win7 32-bit) still cannot solve the problem.
(Lost the properties settings of ALPS touchpad .
Are you actually know the problem facing from the users of Lenovo products ???
Thanks

as i know latest alps drivers ( from official ) doesn't support touchpad options.
i also wanna know why lenovo prefers alps

Synaptics Pointing Device two finger scrolling randomly fails in Firefox 4 RC

I have an HP Envy laptop with a multitouch pad that uses two-finger scrolling gestures. In Firefox 4 RC, this gesture stops working from time to time. I do not believe the touchpad drivers are at fault, since gestures continue to work in other applications and I have restarted the device to no avail. Restarting firefox clears the problem. I did not have this problem in Firefox 3.6.x.

Partial Solution!
I have determined the cause of this problem (though I can't be sure it is the only cause of the problem.) If there is a .pdf file open in any tab, two finger scrolling stops working except for that tab. Closing the tab also solves the problem.
However, this just means that I have a more specific bug to report, then, that the scrolling gestures do not function properly when a .pdf is open (with Acrobat viewer) in any tab.

Operating system not found when deploying to machines with two hard drives using MDT 2013.

Computers with two hard drives will not boot after the install OS step in the task sequence. I get the "An operating system wasn't found. Try removing drives that don't contain an operating system" error. I am able to get the
machine to boot by swapping the hard drives' boot order, but the task sequence won't complete after this. The deployment works fine on machines with one hard drive, and I'm not getting any errors from the task sequence. I'm deploying windows7
enterprise x64 using MDT2013. This is a new custom image and task sequence generated using MDT2013. I can't remove the second hard drive because there are scripts that run on the second hard drive during deployment and also because I don't desire
to remove and re-install 250 hard drives. I've not experienced this problem with earlier versions of MDT.

The bdd.log file you sent does not show two internal drives, it shows only one.
Console > Please wait while DiskPart scans your configuration... ZTIDiskpart 12/16/2013 9:57:04 AM 0 (0x0000)
Console > DiskPart has finished scanning your configuration. ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk ### Status Size Free Dyn Gpt ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > -------- ------------- ------- ------- --- --- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk 0 Online 60 GB 60 GB ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume ### Ltr Label Fs Type Size Status Info ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > ---------- --- ----------- ----- ---------- ------- --------- -------- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume 0 D DVD-ROM 0 B No Media ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Is this the problem?
Keith Garner - keithga.wordpress.com

Installation error : Can't connect to X11 window server using ':0.0

Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
WHILE INSTALLING ORACLE10g ON FC1 GETING THIS ERROR
Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
:0.0
:0.0
Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
HOW SHOULD I MAKE THE REQUIRED CHANGES

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Synaptics multi-touch driver not working

Hello,
I've got a problem with my multi-touch pad. I have, without meaning to, deleted my synaptics pointing device driver and, obviously, it stopped working. I have already followed severeal times instructions by other forums but it wouldn't work anyway. The driver is already installed but it doesn't work any way. I have also tried to enable it but it was already enabled. Rebooting and restarting my computer wouldn't work.
please help me.
my computer model: an ultrabook/sleekbook HpENVY 14-k010us sleekbook

Andy,
A couple of things to try:
Be prepared:
Create a Restore Point Create a Restore Point – Win7 OR Create a restore point Win8
Next:
Perform the Hard Reset . Boot the computer and log in
That may do jar loose any cobwebs.
Version update...
If you are not using this version and you are running Windows 8 or 8.1,
you might install this driver for HP ENVY 14-k010us Sleekbook :
sp62794 Synaptics TouchPad V17.0.2.4
=======================================================================================
Click the Kudos Star!
It is a great way to say “Thank You” for the help.
Kind Regards,
Dragon-Fur

Synaptics Pointting device Driver installs on an Desktop machine while deploying Windows 7X64 using MDT 2013 Update 1

Similar Messages

Maybe you are looking for