Synaptics touchpad doesnt scroll after Windows 10 upgrade

I have HP Pavilion 15 Notebook PC, originally with Win 8.1. I upgraded to Window 10 on 05.08.2015. However, after upgrade the Synaptic touchpad scroll was not working, which I activated from Control Panel. But this activation is only a temporary solution as the setting goes off once the PC is rebooted. Please fix this issue.

See if solution in link below helps solve it http://www.andreafortuna.org/microsoft/2014/10/20/windows-10-solve-the-two-finger-scrolling-issue-for-synaptics-touchpads/ Open Registry Editor (Windows + R, type regedit and hit Enter)Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTPEnhCreate a new DWORD called UseScrollCursor with a value of 0.Logoff or Restart

Similar Messages

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?

Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.

Touchpad stopped working after windows 10

S7-392I installed the upgrade to the Synaptics driver to no avail.FnT and Alt.7 don't work.Any ideas?

I had exactly the same problem. I managed to solve it partiallly by downloading the Synaptics touchpad driver (Windows 10, 64-bit version). Follow these steps to "partially" solve the issue. Only pointing works now, and the buttons are still inacctive. 1- Download and install Synaptics touchpad driver.2- Restart your laptop. If the problem is solved, you're good to go. If not, do the following:3- Search for (Mouse & Touchpad settings) in the Start Menu and click on it. 4- Scroll all the way down and click on "Additional mouse options". A new winodow (Mouse Properties) with several taps will open.5- Click on the rightmost tap called (ELAN).6- Select "E-Lan Smart-Pad" from the "Device" box.7- Click on "Enable Device".8- If checked, uncheck "Disable when external USB pointing device plug in"9- Then click on "OK" As I said in the beginning, this only solved my problem partially. I am still not able to use the buttons on the touchpad, only pointing works.

ThinkPad Yoga Synaptics TouchPad Error msg on Windows 7 startup and loss of gesture functions

I fresh installed Windows 7 Ultimate on my ThinkPad Yoga after getting fed up with windows 8.1. I now get the following error msg on each startup and the trakpad features do not work:
"synaptics touchpad 64-bit enhancements has stopped working"
I can use the mouse but non of the gestures work. I have not been able to find any other posts with similiar issues on the Yoga so any help on this would be most appreciated. The device driver installed was taken from the lonovo site and is the "Synaptics ThinkPad UltraNav. Version 18.0.7.34 (N10GX08W)"

Just when I was happy that major issues have been resolved by constant updating, I am now experiencing this frightening problem. Mostly during startup, and lately in the middle of working, the screen freezes, shows very damaged image (like TV noise), produces the most unpleasant sound through the speakers and nothing works. I need to restart and hope that it will be ok. Sometimes it requires 2 or 3 restarts, going to safe-mode and returning back to get the issue resolved.
This has happened three or 4 times within 24 hrs. I searched in the forum and for another model it was suggested that epresscache might be the cause. I disabled the service, but the problem reappeared even then.
Any help please:
This is what appears on the screen when the computer freezes and produces loud unpleasant noise sound.
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

ITunes Not Working After Windows Upgrade from Vista to 7

I recently upgraded a laptop from Vista to 7. iTunes 7.x was installed before the upgrade. As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x). After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open. I renamed the artwork folder to old and then I was able to get into iTunes. The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes. I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck. Anyone have any suggestions?

I've been working on this issue for 2 days with no luck. Still looking for a solution if anyone has one. Thanks!

My Equium A60 doesnt bootup after Windows update

Hi.
I have an Equium A60 (PSA67E) around 1 year old. There have been number of problems with this one recently. Firstly there was the overheating problem. The machine would heat up and shuts off by itself without any warning. I tried many options by keeping the cooling ports clear but dint help at all.
Recently I have upgraded my bios to 1.90 version as suggested by Toshiba. I'm still to see overheating until now after bios upgrade.
The most annoying is the display driver which in this case is a ATI radeon mobility 7000 failing. This would cause the display to become oversized and the resolution is very low. It would go by itself when I restart the machine.
Last month I reformatted the machine using Toshiba recovery CD. All went smoothly until I switched on the automatic windows update. The first update comes and I install it and restart machine to let it function. It goes well. The second update comes is installed and as I proceed to restart to let the upgrades functional, it wont boot. The machine keeps on starting again and again without loading OS. The display is the typical Toshiba boot display with the yellow indicator (loader) on the screen and after a while a blue screen comes for a short while (I am unable to read what error message it says) and machine starts booting up again. What can be the problem?
I need to install windows XP SP2 and for that I need to go through updating Windows. What can be the remedy and what about the available display driver update. I tried it but it makes situation worse.
I have used the recovery CD at least 20 times as there is no other alternative. I tried starting in safe mode but din't work.

Hi Gaurav,
From your description of the problem there doesn't seem to be anything wrong with what you have done so far, but I would just like to clarify a few points.
1. After you install the system from the recovery CDs do you install/enable your anti-virus software ?
2. Are you using Windows Update in automatic mode or do you manually select the update process ?
I would recommend that you disable the automatic restart on error (Advanced tab in System properties) so that the system will not attempt to reboot when you get your blue screen error. This will let you see what the error is.
regards,

Synaptics touchpad doesn't scroll after Windows 10 upgrade

I installed the Windows 10 upgrade today (From Windows 7) and now the scroll function on my touchpad doesn't work and it's driving me CRAZY not to be able to scroll! I've tried uninstalling and reinstalling the Synaptics driver without success. Help! Thank you!

Hi: That happened to me too on my HP 350 G1. On mine, I went into the control panel, and I changed the view to Large Icons (because it is easier for me to find stuff that way). Then I found a Synaptics Luxpad control panel icon. I clicked on that and found that the scrolling feature was unchecked. I checked it, hit apply and close and now I can scroll again.

Hp Pavilion dv7, synaptics pointing device not scrolling after windows 10

After upgrading to windows 10 my mouse will not scroll. I have updated the driver, no help. I have uninstalled and reinstalled, no help. I rolled back the driver, no help, I reupdated the driver no help, I deleted the whole synaptics system and redownloaded it from their website no help, reupdate the driver again, no help. I then went on to live help....the technician did an update again....no help. I went onto live help again and technician did a system clean/repair from the command prompt, no help (I then gave up with live help) and yes the vertical scrolling option is ticked in the settings. PLEASE can someone help me.

You don't need to be in Windows to mark the D:\Recovery partition Active. Just boot with a utility cd with the disk management capability. If you don't have one_Scroll down on the page and get>> Bootable CD If you don't have a burning app that can burn an ISO to cd get>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it.
Btw-have you tried booting from his Vista Recovery DVD? With the first disc in the CD/DVD drive power on the laptop and immediately tap Esc to bring up the menu. Then tap F9 Boot options. Use the arrow key to move down & highlight the Optical drive then tap Enter key. (No key is needed with Recovery DVDs)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Lost touch "scroll" after windows updates installed

after todays cumulative update for windows 10 was installed, i lost touch scroll/swipe functions. listed in Windows update along with the cumulative patch was an item named "eGalaxtouch - other hardware-usb controller a802).seeing as there is no way to deselect it, it was installed with the cumullative patch. however right after the install, touch scorlling and swiping are non functional. anyone else run into this? any workaround/fixes for this issue?? i did a system restore to just before the update, which gave me back full functions. But windows is again automatically downloading and installing both updates again! there is no way to choose which updates to install, nor opt out of.does HP have an updated driver for touch??? when the windowsupdate installs that "egalaxytouch" update, the touchscreen is useless. and with auto updating, it's a literal install/uninstall loop. i'm starting to regret upgrading to windows10. and with that said, has anyone tried the "roll back to prior version" option in recovery? it's valid for only 30days. i am thinking of going back but am wondering if anyone was successful running that recovery before i try it myself.

No fix as far as i'm aware. my last post is just a workaround until the driver issue is sorted out. It's not so much that you need a driver for this to work. You have to roll back the offending driver so that we can use the last good driver. And yes, i bbelieve that W10 will install updates as it pleases unless you have W10 Pro. W10 Pro can at least defer updates. I'm hoping that a fixed update comes soon so i don't have to defer them for too long. I miss the old 'Hide update' option from before. But as i said, this is just a workaround so you can get your updates then roll back the driver. As mentioned by another poster , this may help for just now. https://support.microsoft.com/en-us/kb/3073930 I haven't tried it myself.

T500 touchpad doesnt work after installing windows7

After i installed windows 7, my touchpad has a problem that i cannot scroll up and down, how can i fix it?

What I did is to install ThinkVantage System Update 4.0, and let that get the appropriate Lenovo drivers.
http://www-307.ibm.com/pc/support/site.wss/MIGR-73695.html

Lenovo Yoga 2 Pro: WiFi doesnt work after driver upgrade

After experiencing Wireless issues I tried to upgrade my Lenovo Yoga 2 Pro 13" with Windows 8.1 64Bit to the latest drivers from the lenovo support site.
Ever since I cannot connect to the WLAN anymore. What puzzles me is that the driver status in the device manager shows a different driver version than what I have installed (uninstalling the driver and reinstalling it doesn't change anything here).
What puzzles me is the Lenovo Website shows driver version 16.6.0.8 (released 25.Jan.2014, see link below), whereas my system display version is 16.6.2.1 (dated 31.10.2013). Hence I thought I have another version from somewhere else on my and removed all driver versions I could find.
Checking driver details I get the follow file versions:
   C:\windows\system32\drivers\NETwbw02.sys    version 16.6.2.1 Intel, dated 2011
   C:\windows\system32\drivers\Netwfw02.dat       no version or publisher
   C:\windows\system32\drivers\vwifibus.sys          version 6.3.9600.16384 Microsoft
Still, whenever I deinstall the driver, install the files from lenovo and click "Detect new device" my system pulls the drivers as listed above and is incapable of connecting to any WiFi.
Windows 8.1. shows no connections available and doesn't connect anymore.
How can I get my WLAN back?
regards
   Florian
Lenovo Driver URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS039994
Solved!
Go to Solution.

hi Florian,
If Windows Update is configured to automatically fetch updates from Microsoft then the machine most likely have installed the Intel driver update for Intel(R) Wireless N-7260 as discussed in this article (which explains the different driver versions).
Things that you can try:
1. If the machine comes with the Intel(R) Wireless N-7260, navigate to:
- Device Manager
- Network Adapters
- Intel(R) Wireless N-7260 (right click > update driver software)
- Browse my computer for driver software
- Let me pick from a list of device drivers on my computer (you will then see a list of drivers, check if you have the version 16.6.0.8 from Lenovo and choose it and observe.
2. Restart the machine and boot into the BIOS (by pressing F2 on the Lenovo screen). Once you're in, navigate to the Configuration Tab and ensure Wireless is set to Enabled (if applicable).
- Link to picture
3. Perform a System Restore and choose a date before the issue began. (this will restore the unit to an earlier point in time where wireless connection is working fine)
4. Perform a Refresh / Reset or press the OneKey Recovery button (this will restore the unit to factory settings - ensure that you backup important files first).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Touchpad wont scroll after healthcheck on Equium A80

hello all,
my problem is after having a pc world health check done on my A80 i am no longer able to scroll using the touchpad, this happened last year as well and the only way i got it back was to go back to a time when it was scrolling, i mentioned this when i went in this year and was shown how to find the page that controls this function, only i cant find it now, i have been in to everything, can find mouse properties and how to enable/disable touchpad, but that is as far as i get.
Can someone please give me clear uncomplicated advice on this as i am not technically brilliant.
thanks
eileen

Hello Eileen
Before we start to discuss can you please tell us, is the notebook preinstalled with delivered recovery CD that contains all drivers, tools and utilities? I presume not. Am I right?
Obviously you are missing TouchPad utility. Please visit Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads. There you can download TouchPad utility for your notebook model. After doing this you will have new tab in mouse properties called Advanced.
There you can find all settings you need.
Bye and good luck.

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

DBMS_SCHEDULER doesnt works after database Upgrade

After upgrading database from 10.2.0.4 to 10.2.0.5 version jobs runing fails.
I have recreated and all jobs, but the result is same.
Last start date shows that some jobs (4 of 10) start to run in a different time than planned. Another 6 jobs doesnt start.
planned 17.09.14 06:30:00,000000 +06:00
fact 17.09.14 11:51:05,715511 +06:00
What to do?

select job_name, enabled, a.JOB_TYPE, a.JOB_ACTION, a.start_date, a.last_start_date, a.LAST_RUN_DURATION, a.next_run_date
from DBA_SCHEDULER_JOBS a
order by 2
1
LOCK_STAFF_VAC
TRUE
PLSQL_BLOCK
BEGIN krn_adm.lock_vacation; END;
17.09.14 06:00:00,000000 +06:00
18.09.14 03:55:33,301720 +06:00
+000000000 00:00:04
18.09.14 06:00:00,300000 +06:00

Synaptics touchpad doesnt scroll after Windows 10 upgrade

Similar Messages

Maybe you are looking for