Sync: 100s of changes when I've made none

When I sync my contacts and calendar with outlook it is telling me there are 200 and some changes to the contacts when in reality I haven't made any changes.  This happens with the calendar too.
What I've tried is wiping all the calendars and contacts from the blackberry and then syncing it with outlook.  The initial sync works fine, but the next time I plug it in it will say there are a bunch of changes.
The blackberry is set to keep all calendar entries and autoarchiving is turned off in outlook.  The same thing happened when I went to a brand new Bold 9900 so it can't be a problem with the phone itself.

I'm betting you have alerts (fonts, xrefs, etc) suppressed via the Prefs. Thing are substituting upon open, but you're not seeing the messages.
Also, FM keeps track of many things (text symbols, rulers, etc.) that you likely don't consider "changes" to your document. Changing those setting results in the same mssg upon close.
-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 11
P: 714.798.7596 | C: 714.585.2335 | [email protected]
@mattrsullivan LinkedIn facebook mattrsullivan.com

Similar Messages

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • I get the message 'There was an error in the App Store. Please try again later. (100)', every time when try to buy a software, i changed my billing info but it didn't work, what can i do?

    I get the message 'There was an error in the App Store. Please try again later. (100)', every time when try to buy a software, i changed my billing info but it didn't work, what can i do?

    Try here >  Mac App Store: "An unknown error occurred (100)" when purchasing

  • How to see when and who made changes in some table???

    How to see when and who made changes in some table?
    Some makes me problems and I want to see who are the usernames.
    Thanks

    Nikoline wrote:
    How to see when and who made changes in some table?
    Some makes me problems and I want to see who are the usernames.
    ThanksEither you need to implement Oracle Audit, or use Logminer Utility to read archived redo log files

  • HT203097 Why do I receive a message that states I need to change to my media sync settings on iphone when my summary shows over 3GB of free space?

    Why do I receive a message that states I need to change to my media sync settings on iphone when my summary shows over 3GB of free space? THe message states the amount of storage needed (610 MB), which is considerably less than my summary shows currently available.

    # Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
    # Sign back in, and you will be asked to save the password you entered.
    # This will save the password and autocomplete if you have this option turned on.
    I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

  • Why does the PDFs' name change when i view them in the iBooks app?

    i have some past papers and marking schemes in my iTunes library....when i sync them to my iPad, they appear just fine....they are there just the way i named them and all...
    but when i open them, the name changes to some coded-ish name with lots of numbers and all that....
    is it possible for me to change some setting and save the name i want for those PDFs? Or am I going to have to live with this madness?
    please help!

    Hello, I wanted to follow up on this issue after reviewing some of the changes with the current update. [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521] This bug addressed some Windows HKEYs that are changed when Firefox is updated/or installed.
    As an update, a patch has been made and changes are on the way for fresh installs of Firefox :-)

  • Problem: syncing my iPod changes song sorting info

    Most times when I plug in my 5th gen 30 GB "Classic" iPod and sync with iTunes, the "sync" action will change the "sorting" ID tags on some of my existing songs and will change the way my songs appear in iTunes.  For example, the text inside the "Sort Album" field may change to the text that is associated with the purchased music (i.e. The Who Sell Out will change to The Who Sell Out (Remastered)).
    Also when I sync the music, the way my music appears to be categorized in iTunes and on the iPod may change (i.e. a song's genre will appear as Rock instead of Alternative) but the change isn't reflected in the song's information.  In fact, when I open the Get Info window, it'll show me the unchanged genre, album name, etc., and when I click OK, it changes the categorization in the iTunes back to normal.  At this point I would need to re-sync the iPod to get the correct categorization back on the iPod.
    This all may sound a bit confusing, but in fact it is a but frustrating.  I have to spend time every often going back through my music to re-classify it the way I want it.  The songs that often do this (but not always) were purchased through the iTunes Store.
    Has anyone else experienced this?  Are there any Preferences or other things I can change in iTunes to stop this?

    I've a similar issue that appears after I change the genre from Rock to Heavy Metal for example.
    When I purchase a album on iTunes I always have to change the genre as the default one is not correct. iTunes on my Macbook accepts this genre change but my iPad/iPhone do not. When I try to sync the songs after the genre update they just simply do not sync. I see on my iPhone the songs greyed out with the circle in front indicating that these have still to be synced but they never do.
    This seems to have something to do with the iTunes connection on my iPhone checking the iTunes content and meta data and the data that is provided from my iTunes library which obvious does not match the genre anymore.
    SOLUTION for this is to:
    backup my iPhone/iPad to my Macbook
    Restore the iPhone/iPad with a fresh iOS installation
    Restore the backup I made in step 1
    Somehow the connection is than broken and you are able to sync the songs with their updated genre information.
    This should be an easy taks as Apple should know that the genres they provide in the first place are very generic (for obviouse reasons though) and users would most likely change those for more detailed subgenres.
    Needless to say that this is a major workaround and a pain in the a** as you need to do this every time when you buy a song that you change the meta data from.

  • Over the air sync can be changed on your iPhone

    iTunes says that "Your contacts are being synced with your iPhone over the air from MobileMe.
    Over-the-air sync settings can be changed on your iPhone".
    How do I change that so I can sync my contacts with Windows Contacts? When I tried to sync with MobileMe I lost all of my contacts and I want to get them back on my iPhone.

    Hi,
    I did the same thing deleted my email account and recreated it, went with the same settings and same issues.
    I certainly am not a Mac or iPhone expert, but I can tell you what happened to me then. I obviously had the same issue with "over air sync can be changed on your iphone" and my contacts had been wiped out. I was concerned as I had lost all my contacts off the iphone however my mobileme account had all of the contacts there. I found that all I had to do was give it some time to really sync between mobileme and the iphone contacts. I was being too impatient expecting them to appear instantly once I agreed to the sync with mobileme. I left it for a few hours and the contacts finally syncd.
    Hope this helps

  • The numbering format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended

    The numbering in (Contents) format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended.

    The issue is that I have made up a contract in Word.
    The second page has a list of all contents of the contract.
    gghhjhhbhbhhbhbjbhj....1
    bv v vghvjvjnnnnnnnnn....2
    When we convert to PDF some of the numbers change. Example 20 becomes 201.
    Your help is appreciated.
    Cheers Ocean designs.

  • IWeb not saving changes when published to folder

    Hello,
    I'm very new to iWeb and to the whole web-design in general. My problem is when working in iWeb, and I save (or publish, if it isn't the same) to a folder, it goes fine the first time. But when I republish (I use republish in order to save my project) the changes I've just made i'snt there. When I go to the folder to check my website from the, I can't se changes there. That's very anoying (or how it's spelled )
    Here's what I find odd:
    ONLY when I restart my computer, the changes are there, and I can see them.
    Why is that, and what do I do?
    Kind regrds
    Palle
    Denmark

    This may be too late to help you, I've just started to work with iWeb myself and discovered that if you go to the File Menu, you should see the option "Publish Site Changes", Click that and it will save the changes.
    I've also noticed that the pages in the list on the left are 'red' if you've made changes to them and haven't published the changes, and blue when you have published.
    (I'm also publishing to a folder for now)
    Elizabeth

  • When Using iOs 7.1.2 OSX 10.9.4 notes are not syncing via USB. When will this be fixed. Not interested in iCloud or IMAP solution.

    When Using iOs 7.1.2 with mac OSX 10.9.4 mavericks notes are not syncing via USB.
    When will this be fixed ? Not interested in iCloud or IMAP solution. it worked before,  I can't really
    understand why apple would change one of my favorite features. I use the notes feature to
    capture  quick ideas on the road and having it synched on my computer and my phone was very useful.
    Previous blog posts elsewhere indicated this would be fixed in the latest rev of iOS, OSX and iTunes.
    But alas after the recent update it's not. Really Annoying.

    poweruser_art wrote:
    When Using iOs 7.1.2 with mac OSX 10.9.4 mavericks notes are not syncing via USB.
    When will this be fixed ? Not interested in iCloud or IMAP solution.
    Then you won't be syncing your notes anymore.
    Contacts and Calendars are the only things they restored.
    iOS: How to transfer or sync content to your computehttp://support.apple.com/kb/HT1296

  • Old Iphoto book was changed when I opened it. How to revert back?

    I have 2 previous Iphoto books that I made and now I have Iphoto11. When I clicked to open one of the books, Iphoto11 totally changed the book and made it into a new version. How do I get the old version back the way I had it?

    You can't.  Evidently the themes that you had used in the previous version of iPhoto are not available in iPhoto 11.  The only way you can get that particular theme back is if you have a backup copy of the older library and can install and run the previous verson of iPhoto.  However, depending on the version of iPhoto, you may not be able to order a copy.
    OT

  • How to get 100% view centered when opening document?

    I work with my documents at 100%. Whenever I open a document the pages are placed rather randomly on my screen... Is there a way to have the pages centered by default? I have to press cmd-alt-0 (to center the spread) and then cmd-1 (to g to 100%) everytime... There MUST be a way to have my documents centered AND at 100% at ONCE when I opened them... right?

    That's exactly what I did, in March already. Thanks for the tip anyway because I see I didn't post my solution yet, which might be handy for future use. I did add (on my Mac) the command-shift-A shorcut to it (as the first in the row) to deselect everything: if you don't do that and you have something selected, an imagie or text, it will center that selected image or text onscreen, which is not what I want. So my script (I actually use Keyboard Maestro) looks like this:
    Shift-Command-A
    Option-Command-0
    Command-1
    And I actually assigned Command-1 to the 'script' because it's such an easy key combination. And when I want something 100% onscreen i almost always want the document to be centered too. Sometimes it's a pity my 'script' also deselects everything, but I've learned to live with it.
    I already made a habit of pressing Command-1 as soon as I open a document...

  • I get an error:"Unable to sync. Your sync key has changed" But I simply type in the old key and it starts woring again

    When Firefox starts I get an error : Sync encountered an error. An unknown error has occurred. when I go to sync preferences it says your sync key has changed. When in the update key dialog I simply type the old key it accepts it ans again starts syncing as if nothing had happened.

    hello, when this is happening after you've already updated firefox with your admin account, try to delete the ''updates'' folder and ''active-update.xml & updates.xml'' within the %localappdata% folder of your restricted account like it is described in http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly

  • Event Structure's value change, not detecting changes when tabbing thru array of clusters

    Hi!  I have an array of clusters (int, int, string, int) control, and want to detecting changes made to the it.  I used the Event Structure's value change case on the array, it works excellent except that it'll only detect the changes when you click out of the element or press the enter key (the one by the numbers, not carriage return).  I want it to detect the changes when I tab thru the cluster or array too, but I can't figure it out... Does anyone have any ideas?
    Thanks!

    mfitzsimons wrote:
    altenbach
    Tried Value Change with my example done in 7.1 and it doesn't trgger an event.  That is why I suggested Mouse Down.
    Curious. I did a few minor edits in 8.0 before saving as 7.1, but the simple value change event got triggered just fine when the value vas terminated with a tab in 7.1. Every time.  Strange....
    Are you on 7.1 or 7.1.1? Maybe there's a difference (I am using 7.1.1).
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for