Sync and Create project operation from DTR is taking more than one hour

Hi All.
Recently basis team has implemented the track for ESS/MSS application.So When we import the track to NWDS its showing 500 Dcs.
I have successfully done the Sync and create project operation from DTR for 150 DCS and its take 5 min per Dcs.
However after that when i am trying to sync Dc or create project DC from DTR the operation is taking more than 3 hour per DC.Which should not be the case because for rest 150 DC that i ahve done Sync operation adn Create project operation from DTR it hardly takes 5 min per Dc.As this operataion is taking so much time finally i have close the NWDS to stop this operation.
I am using NWDS 2.0.15 and EP7.0 portal SP15 and NWDI is 7.0
Can any body tell how to solve this issue so that i can Sync and Create project from DTR for a DC within 5 min?
Thanks
Susmita

Hi Susmita,
If the DCs are fine in CBS build, then I feel there is no need to test all of them locally in NWDS.
You can verify some certain applications in these DCs, then you sync & create project for these DCs & test run these applications.
As I get you only need to check ( no changes will be done ), yes you can verify them in small groups (say 20-25 DCs/group) in different workspaces so that no workspace is overloaded.
But why do you want to keep a copy of them locally as you are not making any changes, you can Unsync & Remove these projects once verified & use the same workspace to work on the next set of DCs.
Hope this clarifies your concerns.
Kind Regards,
Nitin
Edited by: Nitin Jain on Apr 23, 2009 1:55 PM

Similar Messages

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

I am trying to copy more or less 30G from my MacbookPro to an external hard drive and it is stuck in the "preparing to copy" step. But that for more than one hour. What should I do to make it faster? Thanks a lot in advance!

Thanks Shootist007, by blockd files I mean files that I have changed to blocked and when I tried to move then for the first time, I had to unblock again. I am trying to backup my pictures, my songs and other files like word documents and excel tables. First I put all of them as blocked, what caused the first problems on trying to move them. Then, I've unchecked the block option and if I try to move one by one, there is no problem. The issue is to move all together, because it gets stuck in the preparing to copy files step. Anyway, if I cannot do all by once, I'll do it one by one, event though that was not suposed to happen if we are talking about technology, right? Anyway, I thank you again for trying to help me!

How can you create an activity as subsequent act. of more than one activity

Hi.
I want to create an activity as subsequent activity of more than one activity.
I am using FM CRMXIF_ORDER_SAVE, but if I write data structure CRMXIF_DOC_FLOW with more than one item the system shows the error CRM_COPY 010 More than one predecessor was entered for data transfer.
However I have customized multiple relationship allowed, and if I do multiples links in transaction crmd_order it works all right.
Only it doesn't work with FM CRMXIF_ORDER_SAVE. I need create activities with FM because they are interface R/3. What FM can I use to create multiple subsequent activities?
Thanks and best Regards
Sorry for my english.

Hi,
I have got some activities creates in the system. (e.g. Act. 1, Act. 2, Act. 3 and Act. 4). With the FM CRMXIF_ORDER_SAVE filled the structure CRMXIF_DOC_FLOW you can create subsequence activity of one of them (e.g. Act. X.1). I need create the same activity (Act X.1) from another activity, (e.g. Act. 2). I know to do this in transaction CRMD_ORDER by link tab. But I don't know how to do this using FM or BADI or another thing.
Act. 1 Act. 2 Act. 3 Act. 4
.....Act. X.1
Thanks in advance.
Edited by: Ana Isabel París on Jul 7, 2008 2:42 PM

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

Can you download from i tunes to more than one i pod

download from i tunes to more than one i pod

Sync each with the iTunes library normally. This won't erase any content(except for rented movies) from the library, but will erase content from other iTunes libraries on the iPods. If you want to preserve that, click here and follow the instructions.
(106791)

Syncing my iPad is taking more than 36 hours... how do I speed this upso I can update my iOS?

syncing my iPad is taking more than 36 hours... how do I speed this up so I can update my iOS?

Try restarting the iPad. Disconnect the iPad first.
Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Restart your PC.
Try again.

I'm trying to restore and back up my iPhone 4 it's taking more than 45 hours. What should I do?

I have been trying to restore and back up my Iphone which i have just updated and I wanted my apps, contacts, messages,etc,. all back on my iPhone but its taking more than 45 hours and it's only 16 GB. I have really important contacts that I need to have in my phone but it would take weeks to get them back one by one without using the back up.

As has been said, you may have a corrupt backup on your computer. However, if it is a Windows computer you may also have a corrupt socket layer in Windows. So first try this (after canceling the backup):
Open a command window with Administrator privileges and type:
netsh winsock reset
then reboot your computer and try again to do a backup (right click on the phone's name in iTunes and select Backup from the floating menu).
If this doesn't work you will have to delete the existing backup. Go to iTunes preferences, Devices page.
Note: If you have a Mac first try restarting it, launching iTunes, and back up as described above.

How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

Depends on how strong your wifi connection is.
you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

My iphone 4 does not turn on anymore and its been plugged in for more than one hour

My iphone 4 will not turn on anymroe and is left on the screen where its charging with thunder bolt lightening. I tried holding the power button and home button but still no luck. its been plugged in the charger for more than one hour already.

if you tried charging and the reset sounds like it needs to be repair/replaced

HT1206 I have a computer with 2 users and each of us have I tunes authorized but only one of us can cloud sync our purchases what can I do I need more than one ID available

Help please I need to have more than one Itunes Id

Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App

Iphone5 - Downloading application from app store takes more than 24 hours to download and install, even if the memory size of app is very small about 2 MB. WIFI connection seems to works well - because the webpages browsing using safari is very fast.

I face problem with downloading application from apple store.
It took more than 5 hours to install google maps application and many other application took more than 24 hours.
It is very worst to see such downloading performace with my new bought iphone5.
My WIFI connections seems to be very good. As I can able to open many webpages at very high speed.
I can able to see my many HD videos open and play immediately once I touch.
Though i cannot able to test the speed, as the www.speedtest.net also not working in my iphone5.
When i launch speedtest.net app i get the message "Finding closest server" forever and it is never showing the speed details.
My laptop shows the 10Mbps speed with speedtest.net on the same WIFI network
I got much frustrated with iphone5. Can someone help me to fix this issue ?

Hi Thaimic,
Thanks for your reply.
IP Adddress: 192.168.0.101
Subnetmask: 255.255.255.0
Router: 192.168.0.7
DNS: 180.168.255.118, 192.168.1.1
These are my WLAN details.under DHCP and BootP. Could you please tell me what to do with the DNS ? I do not have idea about the DNS.

Create a dynamic search in JSP with more than one datasource

Hello,
In the ViewCiteria tag you can specify the datasource in which you want to place the criteria. Is it also possible to work with more than one datasource ?
In my project I want one query form for specifying criteria for more than one datasource. When I send the query form, I want the right view criteria will be coupled with the right datasource.
Has someone more experience with that ???
Thanks!!!

Hi,
I think I got the same problem! I tried to combine all the tables in a new view and create a query on this view.
But when I search and my result has to be one record from the main table, I get this record more than once.
I tried to use distinct but that does not work because each column has a different value, so the record is never the same.
I hope someone can help us!

I want to order photos on iPhoto. I have logged in one photo, and then my choices are cancel and buy now. How do I order more than one photo at a time?

I would like to order more than one photo on iPhoto. I have downloaded one picture, and then my choices are cancel and buy now. I would like to download other photos to have them printed, too. How do I do that?

Wich version of iPhoto do you have? You need iPhoto '09 or '11 to order prints.
Make an album of all photos you want to order in the same order.
Then select all photos at once, when you use Share > order prints.
You should see a panel like this, where you can mark the quantities. The screenshot is from iPhoto 9.6:

I have songs from icloud showing on more than one device but only want them on one so how do i delete them

Can some tell me how i can not have the songs showing on more than one device for my account

Krshrtr wrote:
it wont let you swipe to the left on songs that have the cloud next to them
That's correct - it only deletes them from your phone, not from iCloud
If you go into Settings, Music and set Show All Music to Off, you will only see the songs that are actually on the phone.
One other tip - once you've deleted the songs/lists you no longer want, restart the phone (hold the Home and Sleep buttons for about 10 seconds until the Apple logo appears) to make sure the songs are gone.

More Than One Hour Footage Audio Rendering Issue in Adobe Media Encoder (from AE)

Hi every one,
I'm having a render issue when I send an After Effects composition longer than 1 hour to Adobe Media Encoder for encoding H264 files. In this case, I'm trying to render an already rendered 70 min. 23,976 fps DPX sequence paired with a corresponding ".wav" audio file into the composition and the H264 file rendered by AME plays silent for the first 10 minutes and past those 10 "silent" minutes the audio comes back normally during the last 59 min and 59 sec exactly.
I've tryed every posible "solution" (changing the audio file from .wav to .aiff and .mp3) and assigning more ram to Adobe Media Encoder and it renders the same every single time.
Please Help!!!!
Oscar.

If you can't track down the audio problems some other way you have two options. Render to a production codec in AE then compress your production master in AME or tender only your subtitles (or use dynamic link) to a lossless with alpha format in AE and marry them to the original video and audio in PPro.
Actually, the first thing I would have tried when audio problems showed up would have been to render a production master using a visually lossless format like QuickTime JPEG 2000 and then compressed in the AME.

Sync and Create project operation from DTR is taking more than one hour

Similar Messages

Maybe you are looking for