Sync/async BPM test

Hi,
I'm trying to implement the sync/async bridge BPM example.
I've created a web service adapter (SOAP) as synchronous sender, and I thought I could use a JDBC adapter as asynchronous receiver, but it seems I need synchronous JDBC adapter to make a SELECT query and get results...
Does anybody know an adapter type I could use as asynchronous receiver adapter for my tests?
regards
Yann

Hi Yann,
it is easier!
make 4 steps in your BPM
1) recieve
2) send async
3) receive (response from step 2)
4) send sync
For step 2) in your integration directory create a receiver determination that calls your BPM (step 3)!
Thats the trick. You do not really need a ASYNC backend system.
Regards Mario

Similar Messages

Sync/Async BPM scenario : Problem at Integration Process..!!

Hi All,
I am doing Sync/Async BPM scenario.
start ->Receive(Request)> Transformation(Responsemap)>Send(SendtoR/3)->Send(Send Response) ---> stop.
When Iam trying to Activate, Integration process giving errors as
Source parameter AA_Payment_Req | http://XXXXXXXXX.com/SAP_PI/DirectSales/Payment not set Target parameter AA_Payment_Response | http://XXXXXXX.com/SAP_PI/DirectSales/Payment not set
Warning: Container element Response is defined but is neither initialized nor used.
But I am using them in the BPM. The same kind of scenario is working for another interface which is already running in production. When I tried to check that interface it is showing only Warning message as Container element Response is defined but is neither initialized nor used.
I tried deleting and creating again and still it is showing the same error.
Can anyone please suggest what might be the problem.
Regards
Deepthi

Hi,
could you pls let me know how its solved, while i am trying the same i am also getting the same problem..
could you pls explain bit more on this.
Thanks,
Venkat.

Need help with Sync/Async BPM Scenario

I have an R/3 RFC -> XI -> HTTP (to vendor A) scenario that is working fine. It is a totally synchronous call event. The Integration Directory pieces sit in a scenario named HotkeyOutbound.
Now I need to create a process for RFC -> XI -> HTTP (to vendor Panduit). The R/3 RFC is the same sender, but vendor Panduit only supports an asynchronous HTTP connection. I followed the Sriram Vasudevan weblog on Sync/Async Bridge and created my BPM. I am stuck on trying to determine what to set up in the Integration Directory.
First off, should I be able to use the same HotkeyOutbound scenario as with vendor A so all hotkey stuff can stay together? Or do I have to create a new scenario with a copy of the R/3 business system for the sender? I moved forward with a new scenario (PanduitHotkeyOutbound).
I also need to know how many config Agreements and Determinations to use. The image at http://webpages.charter.net/kpwendel/keith1.html shows what I have so far. Which are not needed? What is missing?
And I tried setting up an HTTP communication channel for outbound async to vendor Panduit and another for inbound async from vendor Panduit. XI won't let me set up a sender HTTP channel. Why not?
Thank you in advance.

I have yet to figure this out, and probably need to go back to my Integration Repository setup since my problems may start there. This screenshot shows my Repository objects.
http://webpages.charter.net/kpwendel/intProcess.jpg
HELP! These are the steps I took, with questions embedded.
(1) Created data type and message type for xml document (note that same format is used for request and reply).
(2) Created PANRequestAbstractInterfaceSync (abstract and sync) for first part of Integration Process. Should the input message be the RFC or XML message type?
(3) Created PANRequestAbstractInterfaceAsync (abstract and async) for 2nd part of Integration Process.
(4) Created PANResponseToBPM_MessageInterface (outbound async) for interface back into XI from partner. Is this needed?
(5) Created PANHotkeySync_to_Async_IntProc Integration Process to handle sync to async bridge.
- Wondering why PANRequestAbstractInterfaceAsync is the only message interface available when I make container object (PANMessage)?
(6) Created two Message Mappings to handle RFC data to XML mappings (outbound RFC-> XML and inbound XML -> RFC).
(7) Created Interface Mapping that includes both the Request and Response message mapping programs from step six. Source is the RFC and Target is PANRequestAbstractInterfaceSync.
- Do I need another interface mapping with Source being PANRequestAbstractInterfaceAsync and Target being the RFC?
Link to these steps and app diagram:
http://webpages.charter.net/kpwendel/PAN_Hotkey_Diagram.jpg
Thank you very much for your time.

BPM Sync/Async Scenario: error: "Timeout condition of pipeline reached"..!

Hi,
I am doing Sync/Async BPM scenario.
-> Receive message and process and response back to the sender.
Sometimes it will correct correctly. Sometime the message will come and stay in XI and fails with error
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I observed that the messages will stay in transaction "SXMS_SAMON" . and will fail after sometime.
What might be the reason. ? what need to do to stop these kind of errors?
Thanks
Deepthi.

Hi Praveen,
Webservice <--> XI -->BW .
BPM :
start ->Receive(Request)> Transformation(Responsemap)>Send(SendtoBW)->Send(Send Response) ---> stop.
Messages are getting struck in SMQ1 and SM58 at these three points.
1. Message comes and stays in SXMB_MONI in status "Log Version"
The messages are stuck in SMQ1 in READY status without doing any processing.
XBQO$PE_WS90100002 WORKFLOW_LOCAL_100 1 READY 26.02.2009
Once I push the queue by Activating/Unlocking, it will process.
2. when it is trying to send the message to R/3 (Backend system) it is waiting in SM58 with below entry.
WF-BATCH SWW_WI_EXECUTE_INTERNAL_RFC WORKFLOW_LOCAL_100 Transaction recorded
Manually I execute LUW to push it. Once I done the message will go to R/3 system and Response mapping also complete.
3. Again it is waiting at SM58 with below deatails while sending the response to sender.
PIAFUSER SWW_WI_COMP_EVENT_RECEIVE_IBF WORKFLOW_LOCAL_100 Transaction recorded
we are again manually execute LUW. Once we done the response message will go back to Sender.
Any Idea to solve this..?
Thanks
Deepthi

BPM Sync/Async Problem

I am trying to setup the sync/Async bridge.Scenario is below.
Receive (Open Sync/Async Bridge) --> Send Async > Receive Async> Send (Close sync/Async)
I am doing exactly those steps which is provided in Pattern.
Following are in the interfaces.
Sync Interface to post message to BPM (OutBound)
(This interface is exposed as WebService)
Abstract Sync Interface used by BPM.
Async Abstract Interface for Request Message used by Container.
Async Abstract Interface for Response Message used by Container.
Async Inbound Interface to receive message sent by BPM in Async Send Process.
Async Outbound Interface to send message to BPM by Async Receive.
All the configuration Sender agreement/receieve agreement/interface determination/Receive Determination looks fine.
On posting soap data I get the following exception.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
 <SAP:Category>XIServer</SAP:Category>
 <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
 <SAP:P1/>
 <SAP:P2/>
 <SAP:P3/>
 <SAP:P4/>
 <SAP:AdditionalText/>
 <SAP:ApplicationFaultMessage namespace=""/>
 <SAP:Stack>No receiver could be determined</SAP:Stack>
 <SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any pointers will be great help!
Thanks,
Samir

Hi Samir
As you are trying Sync/Async BPM scenario and having a webservice as your sender,go through this link as it is quite similar to your scenario--
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
If you still face error then post it in forum.
Regards
Arpit Seth

Need help with scenario BPM Http-RFC Sync/async bridge

hi all!
i've got the following scenario: HTTP-BPM(XI)-RFC synchronous both of them. for that, i'm using S/A bridge in the BPM, but i'm getting the error 'Timeout condition of pipeline reached'. i think the problem is that the process gets lost in the sync/async communication, because in the trace level shows CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" and after that every message are 'wait time starting'.
don't know the reason of the error. Maybe I missed something to configure?
the BPM is like this:
Receiver(Open Sync/Async bridge) -> Transformation (mapping from http request to RFC request) -> SyncSend (RFC request and response) -> Transformation (mapping from rfc response to http response) -> Send (Close S/A Bridge)
the IR is configured like this:
Message Types u2013 External Definitions u2013 Imported Objects
mt_cxml_request -> contains xsd of xcml request template.
mt_cxml_response -> contains xsd of xcml response template.
zintegracion_pedidos -> imported RFC from R/3
zintegracion_pedidos.response -> imported RFC from R/3
Message Interfaces
mi_cxml_request_async_abs
mi_cxml_request_sync_abs
mi_cxml_request_sync_out
mi_xcml_response_async
mi_rfc_request_asyn_abs
mi_rfc_request_sync_abs
mi_rfc_request_sync_in
mi_rfc_response_async_abs
Message Mappings
mm_cxml_request_to_rfc_request -> mapping from http request (cxml) to rfc request.
mm_rfc_response_to_cxml_response -> mapping from rfc response to http response (cxml).
Interface Mappings
im_cxml_request_async_abs_to_rfc_request_async_abs
im_rfc_response_async_abs_to_cxml_response_async_abs
and the ID is configured like this:
Business system DES -> created business system for RFC adapter with interface mi_rfc_request_sync_in as receiver. Comunication channel u2018RFC Receiveru2019
Businnes service VW -> created businnes service for HTTP adapter with interface mi_cxml_request_sync_out as sender. Comunication channel u2018HTTP Senderu2019
Receiver Determination
two receiver determinations. One for BPM and the other one for RFC(R/3):
|VW| mi_cxml_request_sync_out:
|BPM_PO| mi_rfc_request_sync_abs:
Interface Determination
two interface determinations:
|VW| mi_cxml_request_sync_out | | BPM_PO:
|BPM_PO| mi_rfc_request_sync_abs | * | * :
Sender Agreement
VW
mi_cxml_request_sync_out
Receiver Agreement
|BPM_PO| |DES| mi_rfc_request_sync_in

hi all,
i've removed the transformations from the BPM, and i've created:
in IR:
- interface mapping: im_xcml_request_to_rfc_request_sync_abs
                                source interface: mi_cxml_request-sync_abs
                                target interface: mi_rfc_request_sync_abs
in ID:
- receiver determination: |VW| mi_cxml_request_sync_abs
                                  sender service: VW
                                  interface: mi_cxml_request_sync_abs
                                  receiver: DES
                                  interface mapping:im_xcml_request_to_rfc_request_sync_abs
- interface determination: |VW| mi_cxml_erquest_sync_abs ||
                                     sender service: VW
                                     interface: mi_cxml_request_sync_abs
                                     inbound interface: mi_rfc_request_sync_abs
                                     interface mapping: im_xcml_request_to_rfc_request_sync_abs
- receiver agreement: |VW| |DES| mi_rfc_request_sync_abs
                               sender service: VW
                               receiver service: DES
                               receiver interface: mi_rfc_request_sync_abs
not sure these are the steps i had to do for mapping xml to rfc. but the result is the same error as before, the timeout.
i couldn't test with RTW because i'm getting an error 401 unauthorized.
i'd do it without BPM but the issue is that i wanted to add another step that would be to send the response from rfc to mail too once i got this BPM running. i mean, the response from RFC would be sent to http response and mail both.
the only way i can imagine to do it is with BPM but i'm really fed up with it.
thank u very much folks

Questions on async and sync's unit tests

Hi All
I write a API project and that have sync and async method.
Then I also write a unit tests for them.
What I want to ask is how to write them is better ?
public abstract class ApiProxyBase
 protected async Task<T>
GetDataAsync<T>(IRestRequest restRequest, bool ignoreSslCertificateValidation
= true) where T
: ApiResponse, new()
 protected T
GetData<T>(IRestRequest restRequest, bool ignoreSslCertificateValidation
= true where T
: ApiResponse, new();
 public class GameServerApiProxy : ApiProxyBase, IGameServerApiProxy
async Task<GetGameRedirectResponse>
GetGameRedirectAsync(GetGameRedirectRequest request) ;
 public GetGameRedirectResponse GetGameRedirect(GetGameRedirectRequest request)
 public class GameServerApiProxyTest : TestsBase
 [Test]
 public async void Can_Get_Game_RedirectUrl_Async()
 await LogIn();
 var response
= await _gameServerApiProxy.GetGameRedirectAsync(new GetGameRedirectRequest());
 response.Url.Should().NotBeNull();
 LogOut();
 [Test]
 public void Can_Get_Game_RedirectUrl()
 LogInSync();
 var response
= _gameServerApiProxy.GetGameRedirect(new GetGameRedirectRequest());
 response.Url.Should().NotBeNull();
 LogOut();

I have an
article on asynchronous unit testing. I'd say your async unit test method should be async Task and not async void. Other than that, it looks good. In particular, since your interface has both synchronous and asynchronous APIs, you should have tests for
both of them.
Home page: <a href="http://stephencleary.com/">http://stephencleary.com/</a> Programming blog: <a href="http://blog.stephencleary.com/">http://blog.stephencleary.com/</a> <a
href="http://www.landmarkbaptist.com/salvation">How to get to Heaven according to the Bible</a>

Sync/Async communication in JMS adapter without BPM

Hi,
as of SP19 XI's JMS adapter offers this new feature for Sync/Async communication through JMS Adapter modules instead of using a BPE.
Now I would be interested to know if anybody has already successfully used this feature especially using WebSphere MQ as a JMS Provider (preferredly in the mode JMS Compliant: WebSphere MQ (non-JMS)).
I experienced some issues with the XI Message ID being used as the JMS Correlation ID which is then mapped to the MQ Correlation ID being truncated after 24 characters. So I don't exactly know whether this is due to wrong setup or some general issues with this messaging system.
Please let me know if you have any experiences at all with this new feature (please do not just post links to the following blogs, which I have thoroughly studied as well as the How-to Guide concerning this topic)
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
thanks & regards,
Peter

Hi Peter,
we working on the same Problem. Using IBM Websphere MQ as JMS Provider for the new feature: sync/async bridge without BPE.
we switched on a high level trace for the adapter framework and saw a problem in the receiving Object of the JMS correlation id. The notify bean receives the JMS correlationid in hex format. so the beans have two different correlations, which could not find together.
did you have any solution to get this new feature works with IBM Websphere ?
thanks
joachim

Sync/Async brdige error in BPM

Hi,
I am working on RFC-TO-Webservice scenario(Synchronous) and I am using the BPM in this scenario.
In BPM just I have used 2 steps.
Receive - Opened Sync/Async bridge
Send - Synchrouns step
Send - Cloase the Receive step
Send - Asynchrous send step (to send the response to the file...).
When I sent my RFC message from R/3 I am getting following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I am using PI 7.0 SP13 is why I am not able to receive the Sync message in BPM...I have created the abstract interface based on RFC...getting the first message itself Timeout error.
I am trying to use Sync/Asnc bridge in BPM. First message itself PL_TIMEOUT error..bpm is not able to receive my rfc request...
I need help on this...do I need to do any settings in WEBAS level..I did Timeout setting in SXMB_ADM.
Regards,
Venu.

hi,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
check this blog..and same thing I did in my scenario
my scenario is RFC-TO-Webservice.
Sync/Async bridge can't we use like this ...Receiver step(open sync/async)-> Send(Synchronous)-Send(Close sync bridge)....that way can't we use ...
I am not able to receive the RFC request itself inside my BPM first step...getting the Timeout error.
But when I use the RECEIVE STEP with Asynchronous mode..I am able to receive the message inside my bpm.Incase of Synchronous I am not able to receive the message..
I am working PI 7.0 and SP13..did any body worked this version...
Thanks,
venu.

Call sync BPM from Async BPM - issue

Hi,
Outline: I'm trying to call a synchronous BPM from an asynchronous BPM in a PI 7.0 SP 14 system.
When doing so i get the following error: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed.
Now this is an oldie when searching the forums for this error message. I do however fail to see a solution to the problem.
Note that the following notes (referred to in similar posts)
- 710445
- 718734
- 830803
are implemented since theese refer to older versions of PI.
My scenario is very simple at present since i've startet from scratch again after getting the error. So what i do is:
1) send async message to async BPM
2) async BPM receives request
3) async bpm transform request til sync_request.
4) async BPM calls synchronous BPM
5) sync BPM receives request and opens a async/sync bridge
6) sync BPM maps request to response
7) sync BPM sends response and closes async/sync bridge
8) async BPM reveices sync_response
9) async BPM sends sync_response to some application
Now step 8 i never succesfully executed. Instead the error earlier described is triggered.
For simplicity i use 1 and only 1 message type in all message interfaces. I have mapping between my synchronous interfaces outside of BPM.
The synchronus BPM is executed just fine. The only issue is getting the reponse back to the asynchronous BPM.
I am familiar with the following similar posts:
- Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
- Problem in posting the data in the syncronous mode
but find them to be of no use.
Hope someone can help.
Best Regards,
Daniel

Daniel Hans Engsig-Karup wrote:First you do not need any bridges if it is asyn/sync kind of a scenario in the second BPM. You need a bridge when the bpm has to wait with a sync call coming in and response in an async call. Essentially your BPMs (I donno why you need 2.. but let us go with 2)
>
>
> 1) send async message to async BPM
> 2) async BPM receives request
> 3) async bpm transform request til sync_request.
> 4) async BPM calls synchronous BPM
> 5) sync BPM receives request
(Remove this if you are calling a sync system here) and opens a async/sync bridge
> 6) sync BPM maps request to response
> 7) sync BPM sends response
Remove this and closes async/sync bridge
> 8) async BPM reveices sync_response
> 9) async BPM sends sync_response to some application
>
VJ

Correlation issue in JMS adapter - SYNC/ASYNC scenario without BPM

Hi,
I am working on a SYNC/ASYNC scenario with JMS adapter without using BPM. My scenario is SOAP<>PI>JMS. I configured the interface as below:
1. SOAP Sender channel
2. JMS Receiver Channel writing to Queue A.
 Module used: a. RequestOneWayBean
 b. WaitResponseBean
 Correlation Settings:
 a. Set JMS Correlation ID to "XI Message ID"
 b. Store JMS CorrelationID of request (Checked)
 c. Set JMS Property to "JMS Correlation Id"
 d. Value = "XI MEssage ID"
3. JMS Sender channel reading from queue B ( I am exporting the message from queue A and importing into queue B)
 Module used: a. NotifyResponseBean
 Correlation Settings:
 a. Set XI MEssage Id to "GUID"
 b. Set XI Conversation ID to "Stored JMS COrrelationID of Request"
I can see the cid in the message from queue A. But I observed thhat the header format of the message in Queue A is "MQSTR".
ISSUE:
1. While writing the message to queue A, below adapter log details(part b) concerned me:
 a. Message '8747a7c2-2b06-11df-8055-005056a70ed6' successfully processed by channel
 b. Could not create acknowledgements for message '8747a7c2-2b06-11df-8055-005056a70ed6'
I am not sure why I am receiving the message that " could not create acknowledgements"
2. While reading the message from the sender channel,I consistently get the error message as below:
 a. XI message ID corresponding to JMS message with ID 'ID:414d51205341504449442e514d202020c67b954b20005602'
 will be created as a new GUID with value '21bca916-424f-41f6-3347-c71090392b58'
 b. Error while processing message '21bca916-424f-41f6-3347-c71090392b58'; detailed error description:
 com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
 found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
Below are the blogs which I have already gone through:
1. JMS Synchronous Scenario without BPM - Correlation Settings and Transactional JMS Session
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
2. Note: 1086303
3. Sync / Async Bridge without BPM
In the note, they mentioned something about header being "MQRFH2". BUt in our case, the header is "MSSTR". Not sure whether it makes any difference.
Please help.
Edited by: GP on Mar 9, 2010 4:24 AM

Hi,
detailed error description:
com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: found no correlation ID: RecoverableException:
found no correlation ID at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java:105) ...
This error would generally arose when there are multiple messages, got stuck in the outbound queue. Try to stop both the sender and receiver JMS comunication channels and clear both the inbound and outbound queues.
Once all the messages in the queue are cleraed, try posting the message again.
Regards,
Swetha.

BPM Design using sync-async bridge

Hi Arpit,
Below mentioned is an overview of the process flow which we are trying to implement.
1. A synchronous interface takes in the request
2. After the mapping, a file is created
3. Another file adapter reads this file and sends a message back to the sync interface. This step is to make sure that the file is created
I'm using a sync-async bridge for this process, since file creation and reading processes are asynchronous and the request/response is synchronous.
Can somebody help me by telling how to design the BPM. How many send and receive steps are required etc?
Thanks,
Sandeep
 | Request | | | | | | | |
 |--------->| | | | | | |File |
HTTP| |Sync|--->|Mapping|--->|Async|--->|Adapter|
 |<---------|I/f |<- | | |I/f | |(write)|
 | Response | | | | | | | |_______|
 | |
 | |
 | ____|___
 || | | | | |
 -|Async |<--|File Adp|<---|Folder |
 | I/f | |(read) | |________|

Hi
>>I have to map the incoming xml from HTTP to another format before creating the file.
Ya then u can use the transform Step in between the
sync Recv ---> Transform ---> Send to File System
>>Once a file is read, that interface has to send an acknowledgement message telling the status.
Wht type of acknowledgement msg telling the status.
I think u can add another element in ur created file payload like Status: Created (ConstanT)
Then u can map the payload of the readed file with tis payload having Ststus init.Fo this u need a Transformation Step.
BTW i was searching some previous blogs and i got this and it is bit related to ur scenario.Go thru this
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Hope it helps.
Regards
Arpit Seth

BPM - Receive Sync/ASync Bridge Problem

Hi,
I am creating a scenario for an inbound Synch request to be serviced by a BPM process.
Here is the problem that I am facing while trying to configure the Receive Step
- I created a Message Interface defined as Abstract Synchronous.
- I created a process model and put in a Receive Step: Mode - Opens S/A Bridge, Synchronous Interface - defined as above.
- I define a container with Abstract type. But when I try to locate the above defined Abstract Synch message interface, I cannot find it.
- As a workaround, I create another Abstract Message Interface defined as Abstract ASynch.
- I create a container with this Abstract ASynch message type.
- I use this container in the Receive Step.
But activating the Business Process gives the error:
Message to be received and Synchronous Interface do not have identical types.
Can someone give me the correct procedure to configure the Sync / ASync Bridge ? thanks,
-Manish

Dan,
This is the link you are looking for?
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm

Sync / Async Bridge without BPM

Hi All,
I was trying to implement the Sync / Async Bridge without the BPM. I am trying a HTTP to JMS Sync / Async Bridge. I have followed the following link and done exactly the same as shown in the document
http://help.sap.com/saphelp_nw04/helpdata/EN/45/20d2b4c20a0732e10000000a155369/content.htm
I have used a Java application which will poll the request queue and then place the message in the response queue with the same correlation ID frm the request queue.
After following the above link the response message was not appearing, the message were going to deilvering status and after some time i found that they were cancelled without errors
I searched in the forums for many solutions but what i found was this thread which stated that since the XI message ID is 32 bytes and Correlation ID is only 24 bytes its difficult for Modules to identify the response since the correlation is truncated.
JMS: Synch/Async bridge - how to configure
I tried changing the configuration in the reciver JMS channel to XI Conversion ID instead of Message ID and this also doesnt give me fruitfull results. The message was not being placed in the request queue, it gave an error saying that the conversion id was null. Though in the thread it seems to have worked for him.
After this i planned to dynamically generate a Correlation ID (a dummy one) of 24bytes and i sent it to the request queue this time the message was retrived from the response queue only to find that the correlation ID this time has been converted to some other format
Corrletion ID sent to the request queue: ABCDEFGHIJKLMNOPQRSTUVWX
Corrlation ID coming in the response queue : 4142434445464748494a4b4c4d4e4f505152535455565758
Can anyone put some light on what i exactly need to do or tell me why the conversion ID worked for Daneil in the thread and it gave me an error saying that the Conversion id is null
Rgds
Aditya

Hi Prateek,
This is what was tried in my first case. I did exactly what was given in that link.But since the Message id being 32 bytes and length of correlation id is 24 bytes id is getting truncated.
So its not working fine.
@ke i am having a look at the note will update you on this
Thanks for your response
Rgds
Aditya

Sync Async without BPM and JMS.

Hi Guys,
Searched SDN a lot but in vain...
i have soap(Sync) to File(Async) synario...Soap response can have like this "PI system received message"..
How can i, with out BPM?
Thanks
Prabhakar

i have soap(Sync) to File(Async) synario...Soap response can have like this "PI system received message"..
If the SOAP is mandatorily working in SYNC mode then the above solution wont work (SOAP --> XI --> SOAP)....this will be treated as two different calls for the SOAP and the solution would have worked for ASYNC flow.
Why do you need PI system received message .... if i send a SOAP message and if it is successfully send from the SOAP application then I would get a 200 OK message which would indicate that everything was fine till sending the message to the XI/ PI system.
If SYNC communication is needed then implement a BPM with a SYNC-ASYNC bridge.
Regards,
Abhishek.

Sync/async BPM test

Similar Messages

Maybe you are looking for