Sync Audio using Log and Transfer

Shot footage using Sony Ex-1, recorded audio separately on DAT. There is a Timecode jammed, as well as a clapper. Using Final Cut 6.06.
Can I sync the audio and video before putting them in the bin? Is there a way to sync the audio and video using "Log and Transfer"?
I'm trying to find a way to sync them so that it saves the video and audio as a separate movie file.

You can't sync the files during log and transfer. You have to capture the audio and video seperately, then sync them using a process such as this: http://www.ericbrodeur.com/blog/2008/12/03/syncing-dailies-in-final-cut-pro/

Similar Messages

Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk? With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files. If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

Hi jphil and Tom
I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
Folder structure is
AVCHD
     BDMV
          CLIPINF
               .CPI files
          Index.bdm
          Movieobj.bdm
          PLAYLIST
               .MPL file
          STREAM
               .MTS files
AVF_INFO
     3 files (.bnp, .inp, .int)
DCIM
     101MSDCF
          empty
     MODELCFG.IND (file)
My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
I downloaded the latest version of codec updates from the Apple support site but no difference.
Thank you in advance
Giorgio
Freiburg, Germany

Glitches Convertng AVCHD using Log and Transfer

Hi, I'm converting a large batch of AVCHD to ProRes 422 using log and transfer for a project. I've converted almost all the footage, but have had to break down some longer clips because FCP7 won't convert the whole clip, it starts to act wonky. There is one large clip that I'm trying to convert a section of, that just won't convert and keeps giving me the annoying red exclamation point no matter what I do. I've tried changing the scratch disk, using the original name of the clip, unchecking "abort capture on dropped frames," changing the in and out on points--all the suggestions that I've found on discussion boards--nothing has worked. I've considered buying some external software, but am afraid the clip itself might be corrupted, though I've converted other sections of it with no problem. Any suggestions?

Hi Michael, Thanks for the quick response. I copied the clip, the whole card to a different internal drive and FCP crashed when I tried to transfer a section the troublesome clip. Here's part of the report I got after the crash:
Application Specific Information:
*** Terminating app due to uncaught exception 'NSMallocException', reason: '*** -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (75356)'
*** Call stack at first throw:
The camera is the Sony NEX-FS700. As I said before, I'm baffled. I've transferred two other sections from this same clip and also from all the other clips from this card with no problem. It was a couple of months ago, but I've not changed any settings or preferences.

Can't Import Sony AVCHD Using Log and Transfer

HI
I have been importing AVCHD footage from all kinds of cameras, mainly Panasonics for over 4 years now using Final Cut Pro 7. I just got a new Sony NEX-EA50 but when I try to import the footage using Log and Transfer, it does not show up. When I try to drop the card folder into the window I get the ""PRIVATE" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media." message.
The only way I can import the footage is using Toast, but that is a pain in the *** because it is a hassle to rename and scan the clips before I import.
Does anybody know whats going on? Did Sony purposely change their file directory system so it couldn't be read by FCP?
Thanks in advance.

Hi,
What framerate did you shoot ?
Log and Transfer will not recognise non standard frame rates such as 50 fps or 60fps. Toast, Clipwrap etc is an option but there is another. If you have the Panasonic AVCCAM importer Quicktime plug in, it will allow you to convert to Pro Res through Mpeg Streamclip or Compressor.
DM
Hang on, are you pointing log and transfer at the ROOT folder and not the folders inside.

Cant import using Log and Transfer to FCE 4.0.1 from Panasonic DMC-TZ10

Does anyone know if/how I can import into FCE 4.0.1 using Log and Transfer? I use Log and Transfer with my Sony HDR XR200VE Video Camera but when I try this with the Panasonic DMC-TZ10 I can play the clips in the Log and Transfer Clip viewer however they don't import after I add them to the queue. It just gives me an ! icon and gives up.
I guess I need to know if there is a combination of camera settings and Codecs I can choose that will allow me to successfully import into FCE 4.0.1 using Log and Transfer.
The settings I can choose on the DMC-TZ10 camera are the Rec Mode (Either AVCHD Lite (GPS Rec), AVCHD Lite, or Motion JPEG) and the Rec Quality SH, H or L).
iPhoto 09 and iMovie 09 will automatically import video from this camera if I choose Motion JPEG and H on the DMC-TZ10

Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1?

Best way to import MTS (AVCHD)/missing clips using Log and Transfer

My footage (Sony HDR 500) of an average project consists of approximately 10 hours film and 1600 clips. When I use the option Log and Transfer to import in FCE not all clips are imported in FCE. All other clips are consecutively numbered and cannot be compared with the numbering of the clips on the camera anymore. As a result it is, with those large amounts of clips, almost impossible to find out which clips are missing.
Importing takes a very long time (is that normal?) so I would like to run this proces at night, but due to this missing clips problem I am afraid to do this so it is not a good option for me. Does anyone recognize this problem?
To avoid all this I now convert all clips with Voltaic to .mov before importing. At least I know for sure that I have all clips imported, but it is so cumbersome and it takes a lot of time too. This proces I do in steps because I am afraid to start everything at once. After converting the project almost takes 120 GB.
It takes days before everything is imported and that frustrates me. If the same material is imported in Edius for example it only takes an hour (tested) so it appears to be an FCE/Apple problem. Is there any way to accelerate?
I am working with an iMac from 2010, 2,8GHz quadcore i7, 16GB intern geheugen met snow leopard.
I hope someone can help me out.
Thanks, Jacqueline

While I have not seen the exact problem you describe, 1600 clips is a lot of clips to import at once - so is 10 hours of video.
If you are using FCE to Log & Transfer directly from the camera, your clips are automatically being transcoded to QuickTime/Apple Intermediate Codec(AIC) during importing, which explains the long time it takes to ingest the clips.
Also, QT/AIC files are much, much larger than the AVCHD clips in your camera. If you are shooting 1920x1080 video, 10 hours of AVCHD translates into roughly 450GB of QT/AIC clips. It is possible that you may be a) running out of disk space, or b) exceeding the scratch disk minimum allowable free space set in FCE > System Settings. If so, that could explain why not all your clips are being imported - FCE is probably stopping the Log & Transfer process when it hits the disk space limit.
Regarding alternatives, I'm not so sure about Voltaic. The Voltaic documentation says it only supports H.264 in QT/.mov files, and that would not be usable in FCE. Check some of those clips to see what codec they are. I suspect they are H.264. (Also, you referred to the converted clips taking 120GB space, which just happens to match the AVCHD storage capacity of your camera ... and AVCHD is a form of H.264 video, so they take up about the same disk space.)
In order to edit your clips in FCE, they need to be QT/AIC. Two alternatives come to mind - Clipwrap and MPEG Streamclip. Both can convert AVCHD video to QT/AIC, and both support batch conversion. If it were me, I'd consider Clipwrap first, for this volume of material, since Clipwrap was specifically designed for AVCHD.
The reason importing is so much faster in Edius is that it can import & directly edit AVCHD clips; Edius basically just copies the clips from the camera to your hard drive. FCE has to convert the clips to QT/AIC first, before you can edit the video, and that takes considerable time.

Very very slow import using LOG and Transfer

I am using a CANON VIXAIA HF10.and the clips are importing very very slow. The max time on each clip is only 5 min or so. Is there a way to speed this up? Thanks.

Log and transfer only supports AVCHD. It does not support AVCHD Lite, nor will it work with Motion JPEG media. You could use third party software to convert it, or iMovie and then export a QuickTime movie from there in the correct codec and format.

Canon HG10 -Can't tranfter footages using log and transfer

I'm trying to transfer from canon HG10.Log and transfer not reconising the videos.Any solution please.
GUna

Hello,
I have the Canon HG10 and use the Blackmagic's "Intensity" High Definition HDMI Card with Final Cut 5.1 HD I capture the video uncompressed through HDMI it works great here's the link
http://www.blackmagic-design.com/products/intensity/ working with Mac Pro Intel 3.0. running Leopard, have installed three internal hard drives raid them together to run uncompressed video for edit. Hope this helps they are working on updates for the card to work with other software.
Hope This Helps
Have a good day guys

Importing 60i footage using log and transfer, not working :(

Hi, when I import my 60 fps footage in to Final Cut Express using the log and transfer method (because the footage is AVCHD) it always changes the frame rate to 29.97 even if the frame rate is lower like 24 fps. I need this to be 60 frames per second because I'm working with a slow motion shot and need to get the most frames from the footage.

Thanks, David,
We had done all of those little tricks to no avail... but we did figure it out.
It turns out it was a corrupted sequence that was causing the problems.
Trashed the sequence, now everything's happy again.

While using Log and Transfer, firewire cable got yanked. Help!?!

While in the middle of transferring clips from my camera into my fcp project, the firewire cable got yanked. After retoring the project and recconecting the media, Log and Transfer wont import the clips from the camera anymore. The clips play in the preview window fine, and I even saved the media to a new location and tried to Log and Transfer again but every time I just get a red stop sign with an exclamation point error, with no explanation. What good is an error sign first of all without any explanation Apple? I've also even tried starting a new project to start fresh, but FCP won't transfer the clips. I had this problem once before and it was a lack of hard disk space, but I have at least 65GB left on the Macbook, and about the same on the scratch disk.
Anyone know how to make it work? Thanks!
(transferring footage from a P2 card off of an HVX200)

DO THIS AT YOUR OWN RISK, always best to clone a backup before taking radical steps. You could also try booting to single user mode first (hold shift on start up) that can clear some cache issues up.
Just a wild thought - perhaps a large temp file was created during capture that was not deleted. You would probably want to show your hidden files (google can show you how, involves terminal), and look for a very large temp file on your drive, it would probably be in the same folder you were capturing to, but could also be at the root of your system drive. Their could be some other large temp files too, like a sleep file for instance.
DO THIS AT YOUR OWN RISK, always best to clone a backup before taking radical steps.
good luck!

I have footage shot on a p2 camera, why won't all of the clips transfer when using Log and Transfer?

Only about 60% of the clips transferred over or was shown in the Log and Transfer window.

Offload the cards...back them up. That is priority #1. Do that first...then return the camera. Then try mucking about with this.
Back up the ENTIRE card structure.

Using log and transfer, how do I change the source reel name?

I am importing/transfering native camera footage from folders on a disk that have the same card numbers, FCP is assigning the card number as the source reel. Is it a problem if there are 2 source reels named the same? ie card 1?
If so how do I change the name of the reel for footage already transferred and how do I assign a new reel name before transfer?
Thanks!

Chacos wrote:
how do I change the name of the reel for footage already transferred
In the FCP Browser, switch to list view, then scroll the browser to see the Reel Column. You can enter the reel number there by clicking where the reel number would be and entering it. After you have done one, copy that reel text, and then select multiple clips and paste the reel number into them simultaneously.
MtD

M2t Preview using Log and Transfer?

Does anyone have a workaround for preview not being supported with M2T files? I am importing direct from UDMA CF.
Thanks in advance!

I have the Sony Z7U and import with the Compact Flash using the Sony MRU. DV gives me previews, but not HDV. Somewhere in the literature in fine print it says that. Haven't checked for any updates to the software recently to see if that has changed. Sure hope someone chimes in to let us know if it has.
Sharon

Log and transfer MTS file and audio slip issues

I'm having 3 issues with a 30 minute project in FCE HD.
1. When I create clips in log and transfer, sometimes my footage chatters when I watch in in the viewer or place it on the timeline. It didn't chatter in camera, I checked, and it doesn't chatter in log and transfer. I can re-cut the clip in log and transfer but I'm trying to save time!
2. When creating a clip in log and transfer or just transferring a full clip, FCE trims the last 3 to 4 seconds off. I need these 3 to 4 seconds!
3. When trimming and razoring a 9 minute+ clip on the timeline, the audio begins to slip and continues to slip the longer I trim.
If anyone has answers to my three issues, please help. This project is frustrating in content and now it's frustrating in editing!
Thank you in advance for all your help!!

Sorry it has taken so long for me to get back to you. Again, thank you for taking the time to help me.
Your first question, these clips came from my Panasonic HMC 150 camera. I filmed at 24 fps. I downloaded the files from my SD card to my laptop, then use log and transfer to bring the clips into the project.
FCE only offers 25 fps or 29.97 fps. So, there is a discrepancy there. I'm not sure how to fix that when I want to stay with 24 fps. Yes, I can film at other frame rates, I just prefer 24 for what I generally create. Is there a plugin for more frame rate choices in FCE? Or is that just available in FCP?
Your second question, I always use insert. I only use overwrite for my title cards.
And finally, your third, I am aware of the destination tabs. I understand how they work. My issue with having so many tracks is that I am working on a laptop without a mouse and sometimes when I move a clip the timeline jumps and creates the extra tracks when I place the clip. I just need to be more careful when moving clips.
Now, as to my final issue and that is the trimming of the clips through log and transfer. FCE trims off the first and last couple of seconds and will not allow me to bring them into the project. Is this a setting problem or just inherent of FCE?
I look forward to hearing from you!

Sync Audio using Log and Transfer

Similar Messages

Maybe you are looking for