Sync audio with two different video files to create split screen

I want to sync two different video files to a high quality audio file and create a split screen from there in Final Cut Pro X. Help please?

I'm following along at home, Tom, trying to make sense out of your instructions. (Editorially: This kind of operation is among the reasons I thoroughly loathe FCPX.) This would have been easy in FCP7. Perhaps it's actually the same amount of work (you are describing operations in FCPX I have not bothered to try yet—too scared) but it's far more direct the old way: Find sync points for all three files, stack them up in a timeline, nudge till precisely matched, apply effects.
But I'm glad you're here to help us through this stuff!

Similar Messages

Two different video files in the same clip

Well, I've been looking around and have been wondering if it's possible t have two different video files play at the same time, both being shown at the same time, for example, what I would like to do is; I have two separate video files, one of me playing rhythm on a guitar, the other of me soloing, and would like the to play at once, both being visible at the same time, one on each side of the screen.

if you're using iMovie vers≤6, look at the plug-in makers for some PIP (picture in picture) plug-in...
geethree.com
imovieplugins.com
stupendous-software.com
or, in case you own QTpro, you can use that ..
or, if you like total control, consider purchasing/'upgrading' to FinalCutExpress..

Sync error with heavy music/video files

Hi. Ever since i've updated to 1.1.4 i have started getting this sync error whenever i try to upload heavy files (over 150mb) on my iphone:
"The Iphone,"M'sIphone" cannot be synced. The disc could not be read from or written to."
What could be the problem? This only happens when there are heavy files. If i remove those videos or music then the sync goes thru just fine.
Also, didnt have this problem earlier. Only started after i updated to 1.1.4.

I've not noticed this issue, and I have moved several movies over, and they fall into the 500-600MB range. Have you tried any of the troubleshooting steps? Try to power the phone off/on, then try a reset. That is accomplished by holding down the home button and the sleep/wake button together until you see the Apple logo, then releasing. Ignore the screen with the slide to power off option. If that doesn't seem to do it, it could be one of the files is having a problem. You say that eliminating all of them lets the sync work. Do you have USB 2.0 ports? Try to add just one file at a time to the sync and then see when the sync finally fails. It could be something corrupt in one of the files, and you might be able to elimiate the one by this method. If possible, then redo that particular file, be it a music file from CD or video, and then try again. See if any of this helps.

How to synchronize colors with two different video cameras

I own Sony FX1 and HC9 video cameras. The color between the two video cameras can be pretty noticeable, and I tend to flip between the two cameras a lot during editing. Ideally I would get them to match up better before I start filming, but despite my attempts, I still can see a noticeable difference between them in post-production. I know I can use the color corrector filter to adjust the colors, but is there a more effective way to adjust the colors of the two video so they match better? I have used that eyedropper on the "visual" screen of the color corrector to adjust the white balance. Is there something similar where I could for example click the eyedropper on the blue of one video and it would change the blue of the video from the second camera to match?

You don't really have the controls for that in FCE. You can't fine tune the color with real precision for color matching in FCE. There is a match hue function with the eyedropper, but without separate shadows, mids, and highlight color controls there is only so much you can do.

Syncing ipod with two different libraries, same account

I am trying to sync my ipod with all of the old songs from my itunes account i used on our old computer that are already on it, with my new computer's library that i just set up. I have turned on home sharing and it still won't let me sync it I keep getting a message that I have to erase all the songs from my ipod in order to put the 11 songs i just purchased on there? That seems weird and unnecessary! Please help! thanks!

http://support.apple.com/kb/HT1202

Syncing Contacts with Two different Sim Cards

I am going to be traveling to europe and I have an unlocked iPhone. What i need to know is when i buy the new empty sim card in Europe, how do i put all my contacts from my AT&T sim card onto the new sim card? Is it possible? Thanks.

Contact info in your iPhone's address book is stored locally on your iPhone, not on the SIM card, which is limited to a name and a couple of phone numbers anyway.
Removing the existing SIM card from your iPhone will not erase your contacts from the iPhone's address book since contacts are not stored on the SIM card and have nothing to do with the SIM card. Inserting a different SIM card from another carrier will not touch or affect your contacts stored in your iPhone's address book.
You can test this now. Power your iPhone off and remove the SIM card.
Power you iPhone back on and your contacts will be available.

How do I sync two ipods with two different IDs on the same computer?

How do I sync two ipods with two different IDs on the same computer?

Simply connect them. One computer with one iTunes can manage multiple devices. They're tracked by S/N but you might wish to assign them unique names so that you can track them yourself.
The only minor issue is app updating and purchases while on the computer. It's necessary to log out and back in to the "correct" ID. Much easier to do these things from the iPods.

Open the same raw file in PS5 with two different White Balance settings

I'm trying to open the same Raw File in PS5 with two different White Balance settings. One setting "as shot" the other in "daylight", then blend them. The tutorial I'm watching says to "stack" the images. The tutorial shows one White Balance setting as the "Background" layer and the other setting as "Layer 1". I don't know how to do this and the tutorial is not specific. Can anyone either point me to a step by step instruction or offer some assistance?

Also look at the "Snapshots" feature of Camera Raw itself. It allows you non-destructively to keep multiple sets of settings for a single raw file.
Learning about it far exceeds the scope of what can be done in this particular forum. I would recommend this book as essential reading:
http://www.amazon.com/Real-World-Camera-Adobe-Photoshop/dp/0321713095/ref=sr_1_1?ie=UTF8&q id=1313502199&sr=8-1
Additionally, there's a dedicated Adobe Camera Raw forum:
http://forums.adobe.com/community/cameraraw
Wo Tai Lao Le
我太老了

Hello, I try to sync ICloud with Outlook 2010 on a PC and it work well. When I tried to sync iCloud on a second computer (PC) with Outlook 2010 it didn't work. My question is, can I sync ICloud on two different Outlook account? Thank you.

Hello, I try to sync ICloud with Outlook 2010 on a PC and it work well. When I tried to sync iCloud on a second computer (PC) with Outlook 2010 it didn't work. My question is, can I sync ICloud on two different Outlook account? Thank you.

Hi nprguy,
It sounds like an earlier version of the BlackBerry® Desktop Software installed on your PC may be conflicting with this installation.
I would advise uninstalling both versions of the BlackBerry Desktop Software then reinstalling the latest version.
The following KB articles should provide more information on the issue.
"The feature you are trying to use is on a network resource that is unavailable" when uninstalling BlackBerry Desktop Manager www.blackberry.com/btsc/KB10220
"Error 1316" InstallShield error is encountered when uninstalling or upgrading the BlackBerry Desktop Software
www.blackberry.com/btsc/KB04272
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Is there any way I can sync with two different computers?

yeah, I want to be able to sync my ipod with two different computers without having to erase my ipod.

Hi humanoid_automaton,
First of all, Welcome to the  Discussions Forums!
This particular forum is specifically for Feedback About Discussions. So you may want to post your query in the iPod forum related to your model and OS.
The iPod forums can be found on the iPod Category page.
hope that gets you more appropriate help,
littleshoulders

I am using Windows 8 with iTunes. How do I manage iTunes with two different Windows User Accounts?

I have recently bought a laptop running Windows 8 and downloaded iTunes. I subscribe to iTunes Match and have a large amount of purchased music and imported CDs, along with some films purchased from iTunes.
I have downloaded all of the music and the films to the laptop using iTunes Match when logged in under my User Account in Windows 8. However, when we switch to my girlfriend's User Account, she can load up iTunes but all the music and films have the cloud symbol on them indicating that they need to be downloaded
Is is necessary to download everything to the computer twice (I can't really believe this is the answer) or are we missing something in terms of using iTunes with two different User Accounts?
Thank you.

Step 1
Create a new user account on your device. For Mac users, choose “System Preferences” from the Apple Menu and navigate to the “View” menu. Click on “Accounts” and select the “+” button to add a new user account to your machine. Edit the user information and grant any relevant privileges by following the on-screen prompts.
For Windows users, click on the Windows "Start" button, select “Control Panel” and choose “Add or Remove User Accounts.” A new window will open. Click “Create a New Account.” Name the account and set any relevant privileges by following the on-screen prompts.
Step 2
Sign in to the new user account you created.
Step 3
Open iTunes and click “Sign in.” Enter your Apple ID and password and log in.
Step 4
Download purchases through the iTunes store. All files related to these purchases are stored under the separate user account, thus separating both iTunes accounts and their libraries on the same computer.
Step 5
You can share music from both libraries by dragging your music library to a publicly accessible location on your computer. Click “Preferences” from the iTunes menu and deselect “Copy files to iTunes Media Library when adding to library file.” Add the shared folder to your library from the “File” menu.
Tip
Create more than one library from the same user account by deselecting “Copy files to iTunes Media Library when adding to library file” from the “Preferences” menu. Add the files you want to iTunes by dragging and dropping or by opening from the “File” menu and sync your device to that library. Quit iTunes after the sync and reopen iTunes while holding the "Shift" key in Windows or the "Option" key on a Mac.
(tour du lịch nước ngoài)

My PC is rebooting when I try to sync up with my iPod Video

Since I downloaded iTunes 6.0.5.20 last week I have been having serious problems. When I tried to sync up my iPod Video with iTunes my PC just goes blank and reboots. Also, when I tried to download videos from the music store my PC also reboots and I never receive the video though the store says that I have received the files. This happened with 2 different videos. They were free ones and so no loss but my iPod is now unable to be updated!

ati3duag.dll
that's the second time i've seen that dll referenced here in a blue screen in a week. that file is associated with ATI video card drivers.
try running through the troubleshooting steps i was suggesting to Bahama Boy in this thread:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=2957231
but let's also enlist some additional technical help. let's capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
collect the minidump, and send it to this email address
in the email, include the URL to this thread so that the person who gets the email has some context, but also give as much information about the context of the crashing as you can.

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

How to set two different welcome-file to different servlets in web.xml

Hi friends,
Can some one help with web.xml file
I have to different servlets in applications.
I want to set two different welcome files for my two different
servlets in web.xml
Please, can some one give me sample code to achieve this.
Here web.xml code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <servlet>
          <servlet-name>reports</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrReportsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>reports</servlet-name>
          <url-pattern>/reports</url-pattern>
     </servlet-mapping>
     <session-config>
          <session-timeout>30</session-timeout>
     </session-config>
     <welcome-file-list>
          <welcome-file>reportsindex.jsp</welcome-file>
     </welcome-file-list>
     <servlet>
          <servlet-name>calldetails</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrCallDetailsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>calldetails</servlet-name>
          <url-pattern>/calldetails</url-pattern>
     </servlet-mapping>
<welcome-file-list>
          <welcome-file>calldetailsindex.jsp</welcome-file>
     </welcome-file-list>
</web-app>
I need this fix immediately. Your help will be really appreciated. Thanks in advance.

First of all, my understanding is that you need to have a Servlet 2.4 complaint server to do this...Given that, you're supposed to be able to simply specify the Name of the servlet as the welcome-file to get it to work. For example:
Your servlet section:
<servlet>
<servlet-name>Controller</servlet-name>
<servlet-class>com.company.ControllerServlet</servlet-class>
</servlet>Now you would add the following to your welcome file list:
<welcome-file-list>
<welcome-file>Controller</welcome-file>
</welcome-file-list>Note that you use the servlet-name value from the servlet definition, NOT the url-mapping from the servlet-mapping section.
Please note that I cannot verify this as I am running a 2.3 server at home. When I get to work Friday I can test on a 2.4 machine. However this shouldn't take you more than a minute to test.
Note that I did try this on the 2.3 compliant server and it did NOT work (as I expected)...
HTH.

How to open a raw image with two different exposures?

Hello,
I am trying to open a raw image file in Elements with two different exposures so that I can use an adjustment layer to blend the exposures. For the life of me, I cannot figure this out, and the online help is completely useless. I have read everything in the online help about working with layers and it does not mention a single thing about this process. I know it can be done because I have done it before with a previous version of Elements, but I remember it being a very awkward experience. Can anyone point me to a page with this technique, or share the secret? Thanks. If anyone from Adobe is watching this forum, please try to make this product easier to use, more intuitive, and less reliant on subtleties, and by all means, PLEASE improve the documentation as it is practically empty of any useful information.
Thanks,
Shan

I tried that. When I open one image and set the exposure, then go to open the second image, nothing happens. I then saved one image as a psd file, then it would let me open the raw file a second time. When I had both open on the same screen and dragged the layer from one into another image, the layer size ended up being different than the other file. It was shifted down and to the left. I need these images to be pixel locked, and the user experience I went through did not allow me to do this.
I also do not see a way to copy/paste layers between files.

Sync audio with two different video files to create split screen

Similar Messages

Maybe you are looking for