Sync BB desktop software with Windows 7 64 bit

Dear Friends, I am rally stuck here. I just bought a new laptop with MS office 10 and windows 7, 64 bit. I was earleir using xp and was able to sync my phone with laptop very easily. Now after buying the laptop I just realised that I am not able to sync my BB software and my phone and not able to transfer my data to my laptop.
I tried downloading outlook but it is not getting done, sighting, not possible. I also tried syncing with Morzilla and windows live as well But the desktop software just not identifying neither of them.
Can some one please help me here, in how to sync my phone to my laptop with windows 7 and transfer my contacts and calender on to my laptop.
Other wise I will have to throw away my BB and buy some other phone.
Regards
rohit

Hi and Welcome to the Community!
First off, you must have installed one of the compatible Desktop Organizer apps:
KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
Attempting to use anything NOT on that list will, of course, fail.
Secondly, you must have not have Outlook installed as "Click To Run":
KB24040 Support for Microsoft Office 2010 Click-to-Run installation
If you have it installed in that manner, you must correct that.
I have no idea how your prior machine was configured, but I know 100% that you can synchronize to a Win7X64 Laptop with Outlook 2010...I do it all the time.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Cant Sync Mac Desktop Software with Mac Outlook 2011

Hi,
I cant Sync Mac Desktop Software with Mac Outlook 2011, Calendar and Contacts etc.
The sync button is not highlighted on the BB Mac Desktop Software therefore it can't be clicked.
I have turned on sync in Outlook in Preferences under Sync Services.
In the BB Deskstop Software, when i click on the Calendar function, it says "There are no writable Calendars available for syncing on this computer. The Contacts section says "sync services is currently turned off on this Mac"
I have updated both the Deskstop software and Mac Outlook to the latest updates.
Regards.

Hi and Welcome to the Community!
First off, you must have installed one of the compatible Desktop Organizer apps:
KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
Attempting to use anything NOT on that list will, of course, fail.
Secondly, you must have not have Outlook installed as "Click To Run":
KB24040 Support for Microsoft Office 2010 Click-to-Run installation
If you have it installed in that manner, you must correct that.
I have no idea how your prior machine was configured, but I know 100% that you can synchronize to a Win7X64 Laptop with Outlook 2010...I do it all the time.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Desktop Software with Windows 7 and Office 10

I am having synchronization issues with Blackberry Desktop Software running in Windows 7 with Office/Outlook 2010 (Beta). I get this error message: "No available message structure" when I try to set up the synchronization. I can't find this error message in any on line guide. Any ideas?

Was it working before or it's never worked?
I don't see Outlook 2010 as being supported yet on the system requirements page for the Desktop Manager
http://na.blackberry.com/eng/services/desktop/system_requirements.jsp
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

How can I sync the ipod touch with windows 7 64 bit

How can I sync the ipod touch with Outlook on windows 7 64 bit?

I'm having the same problem with Windows 7, iTunes has been spotty about recognizing my iPod Touch. Now that I've updates Windows 7 with Service Pack 1 (June 2011), It won't complete a sync or a restore at all on either of my Windows 7 computers.
I have gone through every troubleshooter action recommended by Apple Support, and have not been able to improve the situation at all.
I took my Touch to the Genius Bar at my local Apple Store after trying and failing to complete a restore while troubleshooting, and it restored just fine from a Mac. Unfortunately, it now gives me an error meesage (Incompatible device) half way through an attempted sync, or iTunes simply freezes.
I even tried removing the Windows SP1, but that was a mess, as my display went all whacky and iTunes crashed immediately upon startup.
The Windows 7 OS ***** in general, particularly with compatibility issues, and not just for Apple products.
Does anyone know how to remedy this situation?
I'm so frustrated and have wasted so much time on this issue that I'm going to throw it all out the window!
HELP!!!!!!

Using Apple Magic Mouse With Windows 7 64 bit and Parallels Desktop 8 questions

I will be getting an iMac in the coming months and installing Parallels Desktop 8 and Windows 7 64 bit.
I was wondering if I would have the functions of been able to left click, right click, scroll (preferably vertically but also occasionally horizontally) with the Apple Magic Mouse when I'm running Windows 7 through Parallels Desktop 8?
I just wondered if anyone has installed Parallels Desktop 8 and Windows 7 and have you been able to do what i mentioned above and also have you come across any other issues, problems whilst using the Apple Magic Mouse on the Windows side?
If there is any problems/issues with doing the above, is there anything I will need to do to get the above functionality to work?
Thanks in advance.

stz-42 wrote:
I'm using Parallels 8 Win 7 64 bit, on an iMac.
- leftclick and rightclick is working
- i miss the middle button in my cad-software
The same with the trackpad!
Sometimes scrolling is a bit too fast, becuase Win 7 isn't made to use with the Magicmouse or trackpad.
The only thing i miss / doesn't work ist the middle mouse button!
Thanks very much for the help stz-42 its much appreciated.
Providing I can left click, right click, scroll, then that's OK for me as I will be spending the vast amount of my time on the Mac side.
Are you able to scroll both horizontally and vertically when using Parallels 8 Win 7 64 bit on your iMac?

Calendar syncing with Windows 7 64 bit

I can sync all applications with Windows 7 64 bit via Bluetooth except calendar/datebook. It synced one time but now gets hung up every time I try to resync. Can anyone help me?
Post relates to: Treo 680 (Unlocked GSM)

Hello Bogey,
You might want to try setting the calendar/date book conduit to desktop overwrites handheld and then trying to sync again. If the database on the Treo is damaged, this should force the database to be reloaded from the desktop.
Hope that helps,
Alan G

Palm desktop software for windows 7

I have been using the palm software for the past 10 years and I love it. I see palm is not developing any software for windows 7. can anyone suggest what other software contact mgmt companies have to offer ? outlook does not have the same featues as palm. I am currently using 6.2.2 palm trial software without syncing to a device. i am afraid to use this software in future if i am not able to sync with any other device.
please help
thank you
Post relates to: Palm m505

I too have been using Palm OS software forever, and upgraded my device to a Tungsten E2 several years ago. I just installed the software for Windows 7 64 bit (version 6.2) and all works without problems. The only thing I lost was the color coding of the customized categories I'd created. Synching works with either Bluetooth OR on my older PC's I can keep using the cable synch and original software version (4.1.4) that I've always been using. Not sure it this reassures you or not . . .

Desktop PC with Windows Vista won't boot up

My Acer Aspire 180 Desktop PC with Windows Vista won't boot up and has a Recovery error message that says it shut down unsuccessfully. Can someone help me with this issue?

If you have Recovery Disk then try to repair install. If you do not have then you have to contact Acer Support for getting them.
Once it is recovered you must update the Graphic Card Driver. Visit the website of the Graphic Card manufacturer to update it.
S.Sengupta, Windows Experience MVP

HP FQ834UT USB Universal Docking Station software won't work on my HP laptop with Windows 7 64 bit

I am using Windows 7 and when i went to load software for my docking station, HP FQ834UT USB Universal Docking Station, it said it couldn't use the driver. Is there a software upgrade to allow this driver to work on a HP laptop with Windows 7 64 bit operating system?

I have the same issue - I have it installed on my Windows 7 64-bit machine and although it is running, it doesn't work. I am sitting here in Starbucks, which has a Verizon Wifi hotspot (actually Boingo - which is what Verizon Wi-Fi uses) and the "Connect" box does not appear. I had the same issue at an airport recently. It's one of the worse pieces of software I have had the misfortune to use. When it fails to connect, it causes the Wifi connection to drop (incompatibility with Lenovo Access Connections, maybe). I don't think that Verizon understands the meaning of "QA" and "Software Testing".

Problem with HP 6500-E709n Wireless software on Windows 7 64-bit

How do I, or should I, uninstall Microsoft xps printer before installing HP 6500-E709n software on Windows 7 64-bit?
I have tried installing, uninstalling & reinstalling the software twice now and am preparing for a third installation. I inadvertently left the wireless printer on during the first installation & eversince then, I've had to physically unplug the printer to get it to shut off. Now, the printer will only shut off with the power button if I hit it before the wireless light comes on. I cannot get the printer key pad keys to function at all, other than turning the power on & off as described above.
Up to now, I had been using a wireless network flawlessly with a NETGEAR router, untill I tried to install the HP software on my Windows 7 64-bit unit. Now my other computers no longer find the printer....I get the message the printer is off line.
I have currently unistalled all the HP software and rebooted for the third time. The Microsoft XPS printer now shows as the default printer...& I can't find it in the add-remove program list. Do I need to uninstall it before installing the HP software, or is my problem with the eprom firmware?

How do I, or should I, uninstall Microsoft xps printer before installing HP 6500-E709n software on Windows 7 64-bit?
I have tried installing, uninstalling & reinstalling the software twice now and am preparing for a third installation. I inadvertently left the wireless printer on during the first installation & eversince then, I've had to physically unplug the printer to get it to shut off. Now, the printer will only shut off with the power button if I hit it before the wireless light comes on. I cannot get the printer key pad keys to function at all, other than turning the power on & off as described above.
Up to now, I had been using a wireless network flawlessly with a NETGEAR router, untill I tried to install the HP software on my Windows 7 64-bit unit. Now my other computers no longer find the printer....I get the message the printer is off line.
I have currently unistalled all the HP software and rebooted for the third time. The Microsoft XPS printer now shows as the default printer...& I can't find it in the add-remove program list. Do I need to uninstall it before installing the HP software, or is my problem with the eprom firmware?

Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

Try a low-tech solution. Check the condition of the HotSync port connection on both the T3 and the cradle.
Look for any possible corrosion, coating, or bent fingers in the cradle. Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles! (Use a q-tip swabbed in it, do not pour it onto the PDA).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I can't get my macbook to recognize my desktop pc with windows 7

i can't get my macbook to recognize my desktop pc with windows 7.

Mac 101: File sharing may have some hints.
Stefan

My ipod does not sync with Windows 7 64 bit

My new computer with Windows 7 64 bit will not sync with my ipod nano

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

How to connect Desktop Software with BES ?

Hi,
I have installed latest BB Desktop Software on a system other than BES (4.1.6). Also installed BB simulator 4.2.2 (8830) on same system. I connected the Simulator to Desktop software successfully using USB, but can't connect it with BES server (installed on separate system) .
Please tell me how to connect Desktop software with BES ?
regards,
Laeeq
Message Edited by laeeq on 02-11-2009 06:37 PM
Regards,
Laeeq Qazi
Team Lead (Exchange+BES) www.HostingController.com

Hi William,
Please make sure that Forward printing devices is checked. This allows you to use the local printer connects to your Mac in a remote desktop session.
Getting Started with Remote Desktop Client on Mac
http://technet.microsoft.com/library/dn473012
Thanks.
Jeremy Wu
TechNet Community Support

Sync BB desktop software with Windows 7 64 bit

Similar Messages

Maybe you are looking for