Sync between CR2 and tiff not working correctly

I have a CR2 file in LR3 and have applied some tonal corrections and a post crop vignette. When I try and copy the settings over to tiff file using the Sync button the effects seem over done. I produced the tiff file by selecting two images in LR3, selected transfer to Photoshop as layers, edited/merged, and then saved. The resulting file is saved back to LR as a tiff.
Probably worth noting that when I try and sync between two CR2 files it works. Must have something to do with the tiff file.
Only been using LR for a week or so, so if I'm doing something wrong please advise.

The raw file and TIFF file are two completely different things. The TIFF is fully rendered gamma encoded whereas the Raw has no gamma encoding. So, what you're trying to do will always result in two completely different renderings.

Similar Messages

Sync between iphone and Outlook not working

When i was on itunes 9 using i phone version 4 and 4.01 everything was fine, as soon as the latest iphone firmware update happened it all went wrong. When i try to Sync outlook contacts or Calender it says would not do it and just freeze. So i followed advice and upgrade to itunes 10 and now i get a error saying " outlook sync client has stopped working" I looked into windows and here are the details of the error focusing on ntdll.dll
Product
Outlook Sync Client
Problem
Stopped working
Date
08/10/2010 22:35
Status
Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: com.apple.Outlook.client.exe
Application Version: 17.80.0.21
Application Timestamp: 4c5c2baa
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03821
Exception Code: c00000fd
Exception Offset: 00048af8
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

The raw file and TIFF file are two completely different things. The TIFF is fully rendered gamma encoded whereas the Raw has no gamma encoding. So, what you're trying to do will always result in two completely different renderings.

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

Database Firewall in-line between clients and database not working

I’m trying to configure a Standalone Database Firewall in-line between the clients and the protected database so it can block some statements. I’ve followed the Installation Guide and the Administration Guide, but can’t get it working. I’ve configured one Enforcement Point with one Protected Database.
I’ve configured Database Firewall with three Ethernet cards:
eth0 is used for Management (IP. 192.168.1.81)
eth1 and eth2 are associated with Bridged interface br0
The protected database is listening in 172.16.40.3:1521.
The clients are in subnet 192.168.1.x.
I’ve configured the Traffic Source br0 with the IP 172.16.40.2 and is enabled as the Traffic Source in the Enforcement Point.
In the configuration file appliance.conf corresponding to the Enforcement Point, I’ve seen the parameter PROXYPORT=1534, so I understand the clients should connect to this port in Database Firewall in order to access the protected database. Is this assumption correct? Is the configuration I’ve done correct? Are there any additional configuration steps that should be made? Is there any documentation about this configuration files?
Thanks,
Pablo

For in-line blocking mode to work out of the box it is necessary that DB Client's IPs (as they are seen in DBFW), br0 and DB IP are all on the same subnet. If this is not the case you would need to fiddle with routing on the DBFW manually which you are discouraged to do because it's unlikely to be persistent, work correctly after upgrades etc... DBFW is not intended to be a router although it can be made to perform this function. In general I would advise you to stay within the supported configuration and just make sure you network infrastructure is ready for DBFW deployment. IE make sure all these IPs are on the same subnet

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Clientless VPN and Java not working correctly

In a recent discovery we found that the newest version of java will not work with our Cisco SSLVPN setup
We are using an ASA5510 with 8.0.4 IOS version and 6.1.3 ADSM version and most users use an mstsc.exe smart tunnel to rdp into our terminal server farm.
Our laptops are being imaged with Java 6 update 3 (this works fine) then upgraded to Java 6 update 11, after which the smart tunnel appears to launch but a connection cannot be established. Reinstalling the older version of Java resolves the problem.
I was wondering if anyone else has encountered a similar problem and found a workaround. Currently, company equipment is not being upgraded to the latest version of Java but personal equipment is a different story.

To get the old downloader back follow the directions below.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Filter '''browser.download.useToolkitIT'''.
# Double click and '''make sure it says true.'''
# You now have the classic downloader back! Yay!
Any issues or confused?
* http://kb.mozillazine.org/About:config

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

BB 8520 Curve Wireless Sync of Calendar and Contact not working

--- REPOST ---
BB Model: 8520 Curve
OS: 5.0.0.681
Network: Mobilink - Pakistan
Can any one help me out, how I can get wireless sync working on my BlackBerry.
I have two emails accounts setup 1. [email protected] and 2. [email protected] where mydomain.com email is also hosted on gmail. I receive emails on both account and able to send as well.
None of these account contact and calendar are being sync. Previously when GoogleSync app was available I was using that, since Google has discontinued this app, so I have removed the app.
In calendar on device, I can see both the calendars and Wireless Synchronization: YES, but no update in either side i.e. If I create any entry on mobile it doesn't show on web or any new entry on web, doesn't show on device.
Very Important: If I access setup on device I don't see Contacts and Calendar under syncronization, however both options are visible if I use https://mobilink.blackberry.com/ to setup/edit email.
Looking forward your expert advise to solve this issue.
Thanks
Falik
Falik Sher

Please keep posts about the same topic in one thread http://supportforums.blackberry.com/t5/BlackBerry-Curve/BB-8520-Curve-Wireless-Sync-of-Calendar-and-...
Steve_T New to the Community click here
Community Moderator

Keyboard and mouse not working correctly after installing Windows 8.1

I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers.
I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working.
Any suggestions?
This question was solved.
View Solution.

Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself.

Between dowloading issues and Java not working correctly, when the next version coming out? I'm a breath away from switching to IE

I cannot use the Java pull down menus on USAA.com, and downloads cancel when I close Firefox and cannot be resumed. What happened to the old downloader? I have to use IE in order to use USAA.com (primary banking). I tried updating Java, I tried a reinstall on firefox, clearing my cache, everything. No dice. If a new version doesn't come out soon I'm switching to IE... I've been loyal for 10 years.

To get the old downloader back follow the directions below.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Filter '''browser.download.useToolkitIT'''.
# Double click and '''make sure it says true.'''
# You now have the classic downloader back! Yay!
Any issues or confused?
* http://kb.mozillazine.org/About:config

Email counter and connection not working correctly after updates

How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine. Does anyone have a fix for this?

I did find the problem with the counter. It had to do with my Gmail account not my other email account. I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though. I have made sure that the passwords is correct that is entered.

IChat Audio and Video not working correctly...

Hi.
I recently upgraded to Snow Leopard. Before upgrading, I was able to video chat with little to no problem with family over iChat. I just tried it again today for the first time since upgrading to Snow Leopard and the audio is barely working (can only make out every few words, if that), and the video is extremely distorted to where you can sometimes not even tell there are people there. It gets all pixelated and weird. I tried doing the chat with Google Talk and then again with Skype, and had just as many problems with those. My family is using a Mac with an older OS, and they can see and hear me perfectly fine. I'm not sure if the problem is with my computer or with theirs, or if it's just a communication problem, but any ideas would be really helpful. Thanks!

After iChat developed missing audio and video pixellation problem post Snow Leopard installation at my mother-in-law's machine (and ours), I tried the usual decrease the bandwidth fix to no avail.
The solution that actually fixed the probem was to turn off port forwarding protocol on her Time Capsule and our Airport Extreme. Things are now working smoothly even at 500 kbps settings on both ends.
An interesting aside... Turning off port forwarding for ssh to her machine doesn't kill the ssh port tunnel from the outside LAN to her mac. It looks like iChat and the Time Capsule keep an incoming ssh tunnel open even if you have disabled port forwarding on the Time Capsule. I suspect this "secret" opening of ports is the magic of why iChat and screen sharing have been so much easier to set up when a Mac is behind an Apple router. 3rd party routers need ports manually forwarded to the Mac. Apple routers just worked ---- and it looks like Apple does it by invisibly opening ports on their routers when a Mac runs iChat.
Pretty nifty, but also silently opens a security hole that you may THINK you closed. SL seems to trip up over this arrangement when you also turn on Port Mapping Protocol and manually assign ports to forward.
At any rate, it wasn't the data rate, it was a new bad interaction between the Apple Router's Port Mapping Protocol and iChat 5. Turn off PMP on the airport and all becomes well once more.

File sharing between windows7 and mac not working

hi i have been having an issue with file sharing between my mac and pc. my pc running windows 7 can connect to my two macs running mavericks (mbp and mini) but i cannot connect to the pc from my macs. i have file sharing using smb setup on my macs as well as the workgroup setup. i can see the pc in my finder shared tab but when i enter the username and password it loads like its trying to connect and then says cannot connect or sometimes makes you re enter the password and still nothing. i also tired connecting through finder go tab and connect to server but when i type in my ip it asks to input the user and password but wont accept it it just shakes and deletes the text in the user and pass fields. on my pc i have file sharing enabled and like i said i can access my macs no problem. i will give a quick guide of how i try to connect
Pc name is RAID-PC
my admin account name is RAID
pass is: dapice (not actual)
ip address 192.168.2.20
when I click on the raid pc under the shared tab in finder i put as the user RAID and pass dapice ....doesn't work
under the finder go tab connect to server i put smb://192.168.2.20 then push the + and then connect enter RAID as user and dapice as pass... unsuccessful
i have tired reinstalling windows 7 didn't help i tired installing windows vista and also didn't work
i have reinstalled mavericks and that also didnt work
i have spend HOURS looking for the answer and trying all different this with no success any help will be appreciated

Information.
SMB Shares - Mount
SMB Shares - Mount (2)

HFR Range from and to - Not working correctly for hierarchies?

Hi All,
Can anyone help me with my below issue relating to ranges in Oracle’s Hyperion Financial Reporting Studio tool.
The issue I’m experiencing is that when I create a report and use the ‘Add Relationship’ -> ‘Range’ option for my month dimension, the correct months are returned as long as the start month and end month are not the same.
In our setup we have 2 month hierarchies, one for the fiscal year (July to June) and another for the calendar year (January to December). The problem that I’m noticing in the report, is that when I enter a range from July to July, that instead of returning July, it returns July, August, September, October, November, December, January, February, March, April, May, June, July. My though it that it is looping through both the fiscal and the calendar hierarchies to return the range, instead of only the fiscal hierarchy. Both these hierarchies have the same members, however ordered differently.
Does anyone know of a way to resolve this within HFR?
I noticed that when creating the range, there is an option to ‘select a hierarchy’. At the moment there is only 1 choice ‘ Period’, however I’m curious if I could create and link a hierarchy to the fiscal hierarchy, that this might resolve the problem?
Any ideas?
Thanks,
Lance

Hi Lance,
IIRC Range uses the first (main) hierarchy - so you'll need to move the Fiscal year one to be first in the outline.
Cheers, Iain

Sync between CR2 and tiff not working correctly

Similar Messages

Maybe you are looking for