Sync bridge settings

i know cloud will let you sync settings in photoshop cc... what about the settings in bridge ? develop settings etc ?
how can you do that
thank you

You should probably ask in Bridge General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

How do I load a custom colour profile in bridge CC to sync colour settings across whole suite?

How do I load a custom colour profile in bridge CC to sync colour settings across whole suite? I can't seem to load the colour profile sitting on my server within settings as I would have done in CS5. Need to crack this asap as magazine going to press!

See if this helps: http://help.adobe.com/en_US/creativesuite/cs/using/WS37C6D4EA-9407-4954-9A03-92735E070188. html#WSA0A53A1F-BF46-4624-82C6-340A70EFB8C4
Otherwise, ask in the appropriate forum: http://forums.adobe.com/community/bridge

File-SOAP-File Async/Sync Bridge : Null Pointer Exception

Hi All,
I have a File-SOAP-File scenario (Async/Sync Bridge). This scenario was working fine in PI 7.0. However since the time we have upgraded to PI 7.1, this scenario has been failing.
I do receive a response for web service, however the sender File adapter fails after initiating Response bean.
2010-08-04 12:16:02 Information MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
2010-08-04 12:16:02 Information The message was successfully transmitted to endpoint http://vs06cs01.sce.com:8000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2010-08-04 12:16:02 Information The message status was set to DLVD.
2010-08-04 12:16:02 Error MP: exception caught with cause java.lang.NullPointerException:
2010-08-04 12:16:02 Error File processing failed with java.lang.NullPointerException:
Our Current PI level: 7.10.7.33
Patch Level: 33
Please advice.
XIer

Hi,
Please go through all the settings for the modules once again - check for any space or other such character present or if some name is not correctly specified.
If you still get the error, then make some change to the channel and re-activate.
Also, make sure you are following the below sequence in the sender file channel-
ModuleName                                                   Type              ModuleKey
AF_Modules/RequestResponseBean      Local Enterprise Bean     1
CallSapAdapter                                        Local Enterprise Bean     2
AF_Modules/ResponseOnewayBean     Local Enterprise Bean     3
Parameters
ModuleKey                    ParameterName                   ParameterValue
1                                       passThrough                          true
3                                        receiverChannel                Receiver File Adapter Name
3                                        receiverService                  Receiver Business Service
Hope this helps.
Regards,
Neetesh

Syncing Bridge CC between computers

Hi all,
Is it possible to sync Bridge CC settings between multiple computers.
Most other CC apps do, so why not with Bridge. This could be very usefull for Collections, Keywords etc.
Maybe a solution that involves Hazel (yep, I'm on a Mac).
So far I have found nothing satisfying on this subject.
Or is this something that Adobe is coming up with very soon?!

After posting this question I was curious to see if I could manage some sort of syncing with Hazel (noodlesoft.com, only for Mac).
And guess what?
I did!
At this moment I can sync my Bridge Collections and Keywords file between an iMac and a MacBook Pro via my NAS (but this could also be DropBox or similar).
What I have done (this is only relevant for people who are using, or wanting to use, Hazel on their Mac(s)):
I've created a folder on my NAS called 'Bridge InBetween'.
On both my Macs (iMac and MBPro) I created a rule in Hazel to sync the folder 'Collections' and the file 'Adobe Bridge Keywords.xml' to the folder on the NAS.
(This folder and file can be found in 'User/yourusername/Library/Application Support/Adobe/Bridge CC')
Because I do a sync, and not a simple copy that overwrites whatever has the same name, the most up-to-date files are copied and overwritten.
Then, I let Hazel run a script, again on both Mac's, to check between the local Adobe Bridge folder and the folder on the NAS to see if anything on the NAS is newer than on the local Adobe Bridge folder.
If so, then these files are copied from the NAS to the local Adobe Bridge folder, overwriting any existing file(s).
It is that plain simple, and it works for me because I have both Mac's set up in exactly the same way. This is important for syncing the Collections.
The Collections in Bridge are just plain XML files (e.g. collection.filelist) in which Bridge stores the name and path of a file in that collection.
In my case it means that any file in a collection has the same path on both Macs, as long as this file is on a NAS Share or inside my daily (local) work folder, which is synchronised between my Macs thanks to a very usefull NAS utility.
If you must deal with Macs that are not setup exactly the same (username, folder locations and names etc.), you'll have to edit the Collections file to match it.
And because these are XML files, a simple 'search&replace' might do the trick.
Bottom Line:
The syncing works for me because of two identical configured Macs. If this is not the case, then the syncing of Collections can be very hard and time consuming (changing pathnames).
Syncing of the Keywords or even a Bridge Workspace should be no problem, because there is no pathname or whatever stored in these files.
I hope someone benefits form my findings.

Is there Async-Sync bridge in BPM

Hi ,
I am trying this scenario in ccBPM(PI7.10
JMS(Async)>MDM(Sync)>SAP(Sync)
The reason I cant use it without BPM is that message in JMS is needed in SAP step.I am not sure of messages can be persisted without a ccBPM.
When I give receive step as Async,in next send (Sync call) ,I cant see any Syn Abstract interfaces even though i have declared one.Only Asyn abstract interfaces appear to chose container element as abstract type.
In what way can I specify Aysn-Sync bridge in ccBPM ?
Regards,
Premjit

the async / sync scenarios can be configured via two options;
ref these
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Without BPM
File - RFC - File without a BPM - Possible from SP 19.

JDBC Async-Sync bridge does not work

Hi folks.
I read the how to guide How To Realize a sync-async and async-sync bridge within the Adapter Framework and I found some tips at SDN (i.e File - RFC - File without a BPM - Possible from SP 19.) . So on, I created a scenario JDBC<=>SOAP.
My scenario:
1 JDBC adapter sends an async request to SOAP
2 SOAP creates an object in its system and then sends a sync confirmation response to the sender (async JDBC adapter Receiver)
Module Tab of JDBC Sender
Processing Sequence
AF_Modules/RequestResponseBean          1
CallSapAdapter                    2
AF_Modules/ResponseOnewayBean     3
Module Configuration
1 passThrough     true
3 adapterNamespace     http://sap.com/xi/XI/System
3 adapterType          JDBC
3 receiverChannel     JDBC_Object_Receiver
3 receiverService     Legacy_Service
The problem is the scenario works fine until an error is detected on communication channel (Receiver). Any kind of error, as communication problem, insert/update problem or procedure types problem. When this thing happens, communication channel (Sender) posts the next message and a persist error appears, like that
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:Stack>Message ID XXXX for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
After this, all the next messages remain at "Processing started".
This persist error message becomes constant in the system. It is executed once an hour approximately.
I have already tried solving this problem deleting the adapter and recreated it again, but the behavior remains the same.
This is the SOAP Header Main
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>6F5A54B3-96DF-C744-8BF6-A4D4B9289C5D</SAP:MessageId>
<SAP:RefToMessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:RefToMessageId>
<SAP:TimeSent>2007-03-23T14:31:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service />
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>VUC</SAP:Service>
<SAP:Interface namespace="http://oesp0115/xi/webservices">Cliente_THOR_OB</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://oesp0115/xi/webservices">Cliente_THOR_OB</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:P1>F6BC6270D94A11DBB6D000188B40F2CF</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID F6BC6270D94A11DBB6D000188B40F2CF for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-03-23T14:31:30Z" wasRead="false">
<SAP:Engine type="AE">af.xid.oesp0115</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-03-23T14:31:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.oesp0115</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>F6BC6270-D94A-11DB-B6D0-00188B40F2CF</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070323</SAP:Date>
<SAP:Time>113130</SAP:Time>
<SAP:Host>oesp0115</SAP:Host>
<SAP:SystemId>XID</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:Logging>1</SAP:Logging>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId />
<SAP:PipelineService />
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="001">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>1304</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>3744</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>1304</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterOutbound>AENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>14</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>56A2F666C66538F48BCD76B50034F91C</SAP:Sender_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="oesp0115">20070323143130.699</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.714</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="oesp0115">20070323143130.87</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XID</Trace>
<Trace level="1" type="T">client = 001</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-03-23T14:31:30Z BRAZIL</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE">
<Trace level="1" type="T">Message-GUID = F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST">
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="T">SystemError message generated. Guid: 6F5A54B396DFC7448BF6A4D4B9289C5D</Trace>
<Trace level="1" type="T">Error during execution of message : F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): F6BC6270D94A11DBB6D000188B40F2CF</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Message type BEST EFFORT. -> No determination</Trace>
<Trace level="1" type="T">Set interface action INIT into MAST</Trace>
</Trace>
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Someone can help me?
Regards
Rafael

Hey Rafael,
I've heard of ur problem by Carol Garcia.
I still think the problem was related to the fact that you were commiting the work at JDBC adapter, even though your DB (it was Oracle, right?) supports internal commit. I do aggree that this scenario should work for non-commiting DBs, though. Thus it is a bug, and the note is relevant.
Anyway, did you try to commit the work at DB side? I think it should have resolved your case (even though the bug would still exist, but it would not impact you).
Regards,
Henrique.

Lightroom 5.4, syncing photo settings edited in CS6 does not work. Maverick OS 10.9, Raw 8.3.0141

I recently updated Lightroom to 5.4 and noticed that when the file comes back from CS6, the edit/sycn settings does not work. Selecting the gray area of the source file, and selecting another, clicking on the sync produces nothing. When I select a source image and another that has not visited CS 6 the sync works fine. I have used this simple technique for years with previous versions and never had a problem. Something has changed with the update and/or compatibility with the file coming back into Lighroom. Any thoughts about this would be appreciated.

ssprengel, thanks for following up. I work with DNG files in Lightroom that have been converted from Raw CR2 files. They are exported from Lightroom to Photoshop as Tiff files and any files that i edited and traveled round trip could not be used to sync other files in Lightroom. Even simple edits like saturation or exposure have disabled the file from being able to sync the settings to other files. I do most of the syncing of develop settings in Lightroom, but occasionallly I will adjust basic settings in Photoshop for one reason or another and after updating to 5.4 I noticed that sync worked fine within Lightroom only. I have tried a few changes to preferences with regard to how develop settings are registered with the file and that hasn't made any difference. Any ideas?

How do I Sync my Settings in InDesign CC?

How do I sync my settings in InDesign CC? I get a "Sync Settings" option in both Illustrator and Photoshop but don't seem to have that option in InDesign CC.
Thanks,
c.

I have to say that the whole CC serice seems to be a little 'hit and miss' at the moment. I have just found out that Folder Sharing is also not available. I purchased a 3 seat option of the CC for Teams and without InDesign CC Setting Syncing and a shared folder setup the service is much less appealing.
Such is life, I guess...
c.

Proxy-Soap-Jdbc Async/Sync Bridge

Hi,
I have proxy soap requestsoap response-jdbc syncronous scenario. i have used async/Sync bridge for that.
I m getting NO_RECEIVER_CASE_ASYNC, No receiver could be determined error.
I have created :
2 Datatype for proxy sender and jdbc receiver and 2 MT
6 Service interface :
        one abastract syncronous for proxy sender and jdbc receiver
        one abstract asyncronus for proxy sender
        one outbound asyncrous for proxy sender
        one abstract asyncronus for jdbc receiver
        one inbound asysncronus for jdbc receiver
        one abstract syncronous for SOAP request and response
2 message mapping for request and response
1 operation mapping using abastract syncronous for proxy sender and jdbc receiver with   abstract syncronous for SOAP request and response
BPM steps
two container request and response
receiver- send1- send2
receiver for asyncrous and file request
send1 for syncrouns for request and response
send2 for asyncrouns response.
Activated the IR.
ID Part.
Imported BPM from Design and created two business component one for SOAP receiver and one for proxy sender and jdbc receiver.
Created 3 Reciver Determination as proxy sender to bpm, bpm to soap, bpm to jdbc receiver.
Created 3 IInterface Determination as proxy sender to bpm, bpm to soap, bpm to jdbc receiver.
Created 2 Receiver Agreement as bpm to soap, bpm to jdbc receiver
Activated and run the proxy . in sxmb_moni i m getthing No receiver could be determined error.
I have checked the BPM ,No semantic errors found.
cleared the cache with sxi_cache and full refresh url.
Please suggest me with above details.
Regards
Laxmi Bhushan Jha

like in operation mapping we have abstract syncronous interface which has proxy as sender and jdbc as response
receiver to SOAP reuest and response...
Either of us seem to be confused!
This is your scenario (as per my understanding)
Receive (Proxy_message) --> Transformation --> Send (Mode = Sync...SOAP message) --> Transformation --> Send (mode = Async..JDBC req)
If the requirement is correctly understood by me then:
You should have one ASYNC-Outbound and ASYNC-Abstract interface for your Proxy-side.....proxy to be developed on the ASYNC-Out interface.
You should have a SYNC-ABS and SYNC-IN interface for SOAP req and resp.
You should have one ASYNC-IN and ASYNC-ABS interface for your JDBC side.
Mapping to be developed between PROXY_Async and SOAP_Req_Async & SOAP_Resp_Async and JDBC_Async.
Regards,
Abhishek.

Problem with JMS Correlation i Async/Sync bridge

This is my scenario:
Im receiving a request message from the JMS-adapter and forward this via a async/sync bridge to CRM. Im using a synchronous proxy in CRM. I want to send the response from this proxy back to MQ via the JMS adapter and put my original JMS Message ID in the JMS Correlation ID in the response message.
Ive read about how to configure this in the pdf-document How to Correlate JMS messages.
I did as suggested and that is as follows.
1.     In my receiver channel I set the Correlation Setting Set XI Conversation ID To=JMSMessageID.
2.     In my integration process (async/sync-bridge) I set the Conversation ID in my async send step to the Conversation ID of my request message.
3.     In my sender channel I set the Correlation Setting Set JMSCorrelationID To=XI Conversation ID.
When I test my scenario I get the following error:
New JMS message cannot be correlated with the XI message although it is configured. Unable to set because correlation value is null. Correlation rule: XI_CONVERSATIONID, correlated property: JMSCorrelationID
I thought that my Conversation ID should carry the value of my initial JMS Message ID. I know that this is not null.
Can somebody please help me?
Kind regards.
/Helé

Hi Wallace,
I tried to set the Conversation ID to the Correlation ID instead but I still get the same error.
The sending application needs to correlate the request message with the corresponding response and since we are using MQ this is the way to do it.
regards.
/Helé

Async-Sync Bridge without BPM for SOAP WS and JDBC

I heard you can now have async-sync communication outside of BPM by utilizing adapter modules?
My scenarios are:
proxy (async) -> SOAP WS (sync)
proxy (async) -> JDBC (sync)
I will like to capture the synchronous responses in XI and perform some basic error handling.
I read h[File - RFC - File without a BPM - Possible from SP 19.|File - RFC - File without a BPM - Possible from SP 19.] and the release notes for 2004s SP19 and there is no reference to JDBC or SOAP.
tia

Hi Megha,
Plz do refer the below links u will get an idea:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a05b2347-01e7-2910-ceac-c45577e574e0
Sync/Async communication in Adapter without BPM (SP19)
Sync/Async communication in JMS adapter without BPM (SP19)
Async/Sync Communication using JMS adapter without BPM (SP 19)
Async/Sync Communication using JMS adapter without BPM (SP 19)
also try this
Sync/Async communication in JMS adapter without BPM (SP19)
File - RFC - File without a BPM - Possible from SP 19.
Collecting IDocs without using BPM
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
Have a look
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
HTTP to RFC - A Starter Kit
Sync/Async communication in JMS adapter without BPM (SP19)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Do refer this thread:
JDBC Async-Sync bridge does not work
Reward if found useful
Regards,
Vinod.

Async Sync Bridge without BPM (Proxy-Soap-Idoc)

Hi,
I have read some blogs how to do the Async Sync Bridge without BPM for JMS adapters. I have a requirement that I am getting a Async Proxy message to PI and then PI makes Sync Soap call then the result need to send through the Idoc adapter.
Proxy - Soap- Idoc
Here Proxy is a sender so no adapter required in the Config and also Soap is java based adapter and Idoc adapter is a ABAP based so I am not sure this is possible but I just wanted to check with you.
Please let know if this is possible or not?
PI 7.1 with EHP1
Thanks,
Laxman
Edited by: Laxman Molugu on Oct 14, 2010 2:15 PM

The mapping programm can be defined as a user defined function. As sample of mine is "getGoogle()", which is doing some kind of address validation. The input parameter URL[0] contains source address. For that you need to import:
org.apache.commons.logging.*;
org.w3c.dom.*;
javax.xml.parsers.*;
org.xml.sax.SAXException;
org.apache.commons.httpclient.*;
org.apache.commons.httpclient.methods.*;
org.apache.commons.codec.*;
org.apache.log4j.*;
Example code for UDF "getGoogle()" is:
String sUrl = "http://maps.google.de/maps/api/geocode/xml?address=" + URL[0] + "&sensor=false";
HttpClient client = new HttpClient();
GetMethod method = new GetMethod(sUrl);
byte[] responseBody = null;
    try {
//      int statusCode = client.executeMethod(method);
//      byte[] responseBody = method.getResponseBody();
//     result.addValue(new String(responseBody));
String sResponse = "initial";
int statusCode = client.executeMethod(method);
responseBody = method.getResponseBody();
ByteArrayInputStream bis = new ByteArrayInputStream(responseBody);
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder db = factory.newDocumentBuilder();
Document doc = db.parse(bis);
doc.getDocumentElement().normalize();
NodeList nodeLst = doc.getElementsByTagName("formatted_address");
Node formAdr = nodeLst.item(0);
NodeList nlFormAdr = formAdr.getChildNodes();
sResponse = ((Node) nlFormAdr.item(0)).getNodeValue();
      // Deal with the response.
    result.addValue(sResponse);
    } catch (Exception e) {
      result.addValue(e.toString() + "######## exhrenda - googleResponse:############### URL=" + sUrl+"###########"+new String(responseBody));
    } finally {
      // Release the connection.
      method.releaseConnection();

Sync/Async and Async/Sync Bridge in JMS Adapter

Hi,
I have scenarios using both the Sync/Async and the Async/Sync Bridge in the JMS Adapter. In general this works fine. There is just one thing that caught my attention.
In the Sync/Async Bridge, the correlation in JMS is done
JMS Message ID of Reqeust --> JMS Correlation ID of Response
In the Async/Sync Bridge, it is done
JMS Correlation ID of Request --> JMS Correlation ID of Response
which seems strange as I would have expected to work the same for both ways...
I'm following exactly the setup described in the 'How-to correlate JMS' guide.
Has anybody experienced the same thing or am I missing something important here?
thanks for your help
regards,
Peter

Hi,
If I get it right the MQ queue gives a response message back to XI. The message looks okay on MQ queue, but in XI it's empty.
So I guess the problem must be within the channel that picks it from MQ queue. Did you configure any modules in it that might screw up the content? Is the the message empty as soon as it arrives in XI adapter engine? Pls. check in RWB Monitoring or End-to-End monitoring.
Do you have other channels that pick up messages from that or another MQ queue which do not show such an error? Are they configured exactly the same way?
Regards,
Kai

Alerts and Error handling in BPM Async/Sync Bridge

Hello All,
I am developing an Async/Sync Bridge in BPM for sending a request from ECC webservice asychronously to a front end application synchronously using BPM Async/Sync Bridge. I get a response from the front end to PI and stays there.
It wont be send back to ECC. What are the possibilities of error handling required in this type of scenario.
Thanks
Deno

. I get a response from the front end to PI and stays there.
Then it should mean that the BPM design is faulty...did you have a send step at the end which closes the Async-Sync Bridge by sending the message to original sender?
In SXMB_MONI --> For BPM message processing there will be a link called PE...click it...check the graphic workflow...see till where the message has processed.
error handling
include your Sync send step whithin a Block....this block will have an Exception Branch....in this exception branch you can have your Exception handling logic...like raise alert, cancel process etc.
Regards,
Abhishek.

Async/Sync Bridge with SOAP response

Hi All
I have a interface that uses BPM for async/sync bridge(SOAP->RFC->IDOC). I now need to change this to send response back to he webservice.
Any ideas on how to achieve this?
Regards

avoid the BPM.
just do a simple SOAP to RFC scenario here - Walkthrough - SOAP XI RFC/BAPI

Sync bridge settings

Similar Messages

Maybe you are looking for