Sync-client of E61 does not react anymore

Hello,
the connection to my E61 is fine: SMS, Contacts and all other data can be exchanged between my Windows XP via BT very well.
Only when I try to triger the sync the 7.0.9.2 PC-Suite from the XP-side my phone seems not to realize, that the PC wants to sync.
To duplicate the syn profile on the E61and then syncing from the E61 to the PC works!
I remember that the first time I synced, a little application (the pc-suite-client?) has been installed on the phone.
I think when this step can be repeated I can solve the problem.
But how can I do this? The pc-suite-client is not a normal symbian program, therefore I can not deinstall it.
Regards,
onurbi
Solved!
Go to Solution.

Solved:
After removing the bluetooth connection and reinstall it, it works again as usual.

Similar Messages

Facebook does not react anymore since this Update?

With Google Chrome and Safari facebook does not react anymore.
Chrome gives server error
Safari is blank.
May be it has eo do with Facebook but it happened just after this update...?!

Given the lack of discussions, it's likely that there's something isolated within your configuration or your network connection. (This'd likely be producing mass panic, if it were a general problem.)
I've intentionally blocked FB here via local means, so I'm not in a position to test the connection.
Did you use any of the third-party Flashback removal tools? If so, which one?
Do you have any network-filtering, anti-malware or other security packages installed?
Is your DNS setting aimed at your ISP DNS servers, or at the Google DNS 8.8.8.8 servers?

Device does not react anymore: flashing and busy

For an unclear reason my Blackberry Curve started to show a white screen for 3 seconds, than black, (LED red) and it continues doing that.
Even removing the battery for hours and putting it back in does not solve the problem, it remains to react like this.
Can somebody please help?

Thanks for the hint but I am still stuck.
If I follow the recommended steps in the article, I can connect the device easily, then it starts the update with Erasing applications, Loading System SW, but then it tries to reconnect to the JVM and this fails since after previous steps it is still in an endless loop.
I was thinking I need to be able to wipe the memory and found JL_Cmder, tried the Wipe there and after about 50 times or retrying I could reboot it with error 507 and then ran the app loader again with v4.5. Succesful, but after that, a couple of minutes later it started to endless loop again... tried again about 50 times to wipe it with JL_Cmder but was not as lucky as before...
This is quite frustrating.. I spent hours on this already and I really wonder if there aren't any better tools available for capturing this...
I hope somebody can still provide me with some more info...
tx
Danny

When ipad connected to windows computer for sync I cannot install or remove an app. Screen does not react. Also lost my app store app from the ipad screen

when ipad connected to windows computer for sync I cannot install or remove an app. Screen does not react. Also lost my app store app from the ipad screen. IPad is ipad 2 and op system is 8.1.1. Just tried full restore and still the situation is the same.

For the missing App Store issue, if you swiped fro screen to screen to look in other folders and didn't find it, and did a spotlight search to see which folder it is in and had no success with that, Check Settings>General>Restrictions and make sure that you didn't disable it.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.
For the syncing issue, which screen does not react, the computer and iTunes or the iPad?

Homekey does not react

hi there,
after installing the new 5.1 os the homekey does not react anymore.
reboot, restore, anything - the problem is still the same.
what can i do?
anny suggestions?

- If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem. An appointment at the genius Bar of an Apple store is in order.
- You can also turn on Assistive Touch. See chapter 30 of the users guide
iPod touch User Guide (For iOS 5.0 Software)

[iPhone] view does not react

Hey,
i created a view programmaticaly and want to implement some more functionality. Since a few days, my view does not react anymore to events, except for memory warnings and the rotation of the phone. If i touch a textfield for instance, there is no keyboard showing. It is impossible to scroll, but scrolling is enabled as is userInteraction.
Anyone knows this kind of problem and has some ideas? Just tell me what you think might be the reason. Thanks.

No ideas? It would be helpful if u just suggest possible solutions, i am running out of ideas to solve this problem.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud.

When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

Java Web Start Application surprisedly does not start anymore based on new JRE1.7.0_45

Hi everyone,
we have to maintain a self-developed Java Application which is running based on JRE1.5.0_51 (x64). Our recent client machines have JRE1.7.0_40 (x64 too) installed in addition to the mentioned (and needed) JRE1.5.0_51 (x64).
Everything was fine up to the point where we tried to install the newest JRE1.7.0_45 (x64) as the new version for doing the web start magic. The result is that our application (which is/was unchanged!) does not launch anymore. The strange thing is that we do not get any StackTrace, Exception or something else like this.
The startup process simply hangs :-(
Nothing has changed (application itself, firewall, network settings, hardware) apart from the new JRE version. It's reproducible at will. If I install JRE1.7.0_40 (x64) the application starts, if I install JRE1.7.0_45 (x64) the application hangs.
I can say for sure, that in both cases (*_40 AND *_45) Web Start is able to do the synchronizing job and to launch the application base on the correct JRE1.5.0_51 (x64).
My guess is that in case of an installed JRE1.7.0_45 (x64), the application hangs when it tries to connect to the database (Oracle 11g) via JDBC.
I found a little hint in the Web Start Console. Therefore I had to switch the trace level of the console to 3 (which includes security, network and basic)
In case of an installed JRE1.7.0_40 (x64) - which leads to a running application - I will receive the following output:
Java Web Start 10.40.2.43
JRE-Version verwenden 1.5.0_51-b10 Java HotSpot(TM) 64-Bit Server VM
security: Istrusted: http://PKS-Server/jnlp2/advise_office.jnlp true
avawsApplicationMain     3798 DEBUG root                : get Service: com.sun.jnlp.BasicServiceImpl@3b8e609b fileName: connection.properties
network: Cacheeintrag nicht gefunden [URL: http://PKS-Server/jnlp2//connection.properties, Version: null]
network: Verbindung von http://PKS-Server/jnlp2//connection.properties mit Proxy=DIRECT wird hergestellt
avawsApplicationMain     3803 INFO root                : 'Alex2 connection.properties' wurde vom WebServer gelesen
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
avawsApplicationMain     4488 DEBUG root                : get Service: com.sun.jnlp.BasicServiceImpl@3b8e609b fileName: connection.properties
network: Cacheeintrag nicht gefunden [URL: http://PKS-Server/jnlp2//connection.properties, Version: null]
network: Verbindung von http://PKS-Server/jnlp2//connection.properties mit Proxy=DIRECT wird hergestellt
avawsApplicationMain     4492 INFO root                : 'Alex2 connection.properties' wurde vom WebServer gelesen
Connect OK => application starts.
In case of an installed JRE1.7.0_45 (x64) - which leads to a hanging application - I will receive the following output:
Java Web Start 10.45.2.18
JRE-Version verwenden 1.5.0_51-b10 Java HotSpot(TM) 64-Bit Server VM
security: Istrusted: http://PKS-Server/jnlp2/advise_office.jnlp true
avawsApplicationMain     3805 DEBUG root                : get Service: com.sun.jnlp.BasicServiceImpl@25a41cc7 fileName: connection.properties
network: Cacheeintrag nicht gefunden [URL: http://PKS-Server/jnlp2//connection.properties, Version: null]
network: Verbindung von http://PKS-Server/jnlp2//connection.properties mit Proxy=DIRECT wird hergestellt
avawsApplicationMain     3810 INFO root                : 'Alex2 connection.properties' wurde vom WebServer gelesen
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
network: Verbindung von socket://PKS-Server:1521 mit Proxy=DIRECT wird hergestellt
These last "network:" log entries will never stop. This will lead to an infinite loop which results in a great memory leak. I have to kill the process via windows task manager in order to get rid of it.
Does someone out there has the same problem? Are there any new additional security issues which prevent my client to establish the database connection on port 1521?
Any other ideas?
Thanks in advance for any hint on this issue!
Regards,
Alex

Resolution: We still were not able to solve this issue! The only way to get out of this is to install the JRE1.5 as the x64 variant. In this case no switching from 64-bit to 32-bit is needed and everything is on track again.
But this is still strange and unexplainable :-(

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.

Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa

Pages does not open anymore after the latest update

I did all suggested problem solving steps, but after the last update Pages does not open anymore.
It opens a window and immediately crashes again.
I paid for it, and I used it for my business - and I'm so angry, that there is no support for apps in fact...

Welcome to the Apple Community.
Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

WLS5.1 SP8 problem : weblogic does not start anymore : method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found

Hello,
I currently have a problem with the EJBException which does not give the
client the getCausedBy() Exception. I d' like to try the 5.1 sp8 to see if
the bug is fix.
Unfortunately, after having installed the sp8, my WLS 5.1 does not start
anymore : I get an invocationTargetException.
Does anyone have a clue ?
Best Regards.
dom
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
tel 02 38 64 37 95
mailto:[email protected]

Well... I've made a big classpath mistake.
It works indeed.
dom
"Dominique Jean-Prost" <[email protected]> a écrit dans le
message news: [email protected]...
Hello,
I currently have a problem with the EJBException which does not give the
client the getCausedBy() Exception. I d' like to try the 5.1 sp8 to see if
the bug is fix.
Unfortunately, after having installed the sp8, my WLS 5.1 does not start
anymore : I get an invocationTargetException.
Does anyone have a clue ?
Best Regards.
dom
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:141)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:113)
at
weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.jav
a:105)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(Recurs
iveReloadOnModifyClassLoader.java:53)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<
init>(RecursiveReloadOnModifyClassLoader.java:149)
at
weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextIm
pl.java:1571)
at
weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:
539)
at
weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java:523)
at weblogic.t3.srvr.HttpServer.start(HttpServer.java:418)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1312)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
tel 02 38 64 37 95
mailto:[email protected]

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Satellite U400 - the webcam does not work anymore

Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
Graziee

Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

TouchPad lock key does not work anymore on Dell XPS L401X

Hi everyone,
On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
Any hint to fix this problem?
Many thanks!
Tinh

Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
I'm sorry i can't help more.

Sync-client of E61 does not react anymore

Similar Messages

Maybe you are looking for