Sync config b/w different location stand alone firewalls

i am looking for a solution as I have two ASA firewalls at different locations and both are single routed mode firewwalls. One is sitting just in case the main site fails it will use as the backup internet point for whole network. But I need to find a solution so that changes made to the main HQ firewall will reflect automatically on the 2nd DR node.
Looking forward for your suggestions ans thoughts.
Thanks,

Hi Khalid,
The ASAs cannot replicate configs between two different devices (which are not in failover or clustered).
Therefore, you would need an external solution. This could be using something like CSM, to deploy the same policy to both boxes, or you could script it.
A script would probably log into your primary box, download the config, and then parse the security policies (ACLs, NAT, inspections, etc)... then log into the secondary box, remove the security policy and apply the same one from the primary.
I hope it helps,
David.

Similar Messages

BlackBerry Link and syncing Contacts, Calendar and Tasks with stand-alone desktop installation of Outlook 2010?

I have used Blackberries in business since the beginning. Fantastic products!
Sadly after spending the better part of Feb 6th transitioning from Torch to Z10 I have had to abandon the effort and request an RMA number to return the Z10.
Here is why:
"Link" appears to be focussed on syncing documents and media like content such as music and movies but does not, from what I can tell, sync Outlook Contacts, Calendar entries or Tasks. I have never bothered putting music or movies on a BB... never had the time to fuss with such... however, I use, edit and sync my Contacts, Calendar and Tasks between my Torch and my desktop PC every day... as in EVERY day!
From a review of postings on various forums there does not appear to be a solution in the works to this problem and the trend appears to be to use a Cloud based email or service to host such "PIM" information and then sync the handheld to the Cloud repository. This method MAY be suitable for some forms of info but it is not suitable to post such personal info on the cloud... it needs to stay on the desktop and in the handheld device, both of which are password protected and looked after carefully.
This is an odd situation, BB (RIM) cut their teeth on pages, emails, BBM and great cell calls, mainly in a business environment. Many small business users live and die on their BB. They do not run Exchange Server... they run Outlook stand alone on a desktop. To remove this functionality from the Z10 (BB10 overall perhaps) seems at best to be a serious oversight.
I wish BB the best with the Z10 and hope to see it do well. For me, I had to make a choice between the efficiency and effectiveness of syncing Outlook Contacts, Calendar and Tasks with the Torch, or hand feeding and maintaining thousands of constantly changing entries into what is undoubtedly a more powerful and wonderful looking Z10. Efficiency and effectiveness won over brawn and beauty. The Torch is back on line... It's a tool... a really great tool! Tomorrow it will process a hundred emails, numerous SMS messages, a few BBM's, keep me on time and feed me a bunch of useful phone numbers and addresses as it has for a couple of years now. It will also spend an hour or so teathered to my laptop at a remote location where there is cell coverage but no internet. It will NOT display any movies, tweats, twits, or facebook stuff that I won't have time to look at anyway. The fast, powerful, shiny Z10 is heading in an RMA bag back to Telus.
I have a sort of sick feeling in my gut and hope to be able to sync again in the future!

my feelings and my situation excatly

Syncing three machines in different locations.

Sorry to post this in BOTH Leopard AND Time Machine, but I'm not sure what the required expertise would be, so apologies.
I have an iMac at home using Airport 24/7 broadband. and a 400gb exterior hard drive (which I currently use with Time Machine)
Exactly the same at work on a LAN
A MacBookPro for when I travel.
and I'm buying a small macbook for my secretary and a time capsule to replace airport (so I can put airport in my office at work)
Everything runs Leopard.
How can I ensure that every machine has exactly the same files and information on everyday. I can use Chronosync if my laptop and imac are in the same room, or Timbuktoo over the net, but thats sort of retroactive after I have found out I forgot to sync or worked on the file on a different mac. Is their an automatic way using .mac or the like to sync all the machines at once automatically or manually.
Thanks in advance for your efforts on this site.
Brett

I would go for a simple shell script using the built-in rsync tool. Ask in the Unix forum for help setting it up.

Accessing JMS Queue located in stand alone managed server on same domain

Our use-case is as follows.
In our weblogic domain we have SOA_Cluster and a stand alone managed server. All the custom JMS resources belong to a JMS server that is targeted to stand alone JMS server. We are trying to access JMS Queues/Topics located in the stand alone managed server from JMS adapter (part of SOA Cluster).
I am wondering what should be our adapter configuration in this scenario. In going through JMS adapter use-cases (below is the link), there is a mention of how to access resources located in Remote weblogic Domain. I am wondering if the same applies to us OR if there is better way to access JMS resources for our use case.
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10231/adptr_jms.htm#CJAHAFGF
Appreciate your feedback.

Accessing JMS Queue/Topic located in different Managed server on same domai
Regards,
Anuj

Flash Player Renders Images Differently in Browser than Stand-alone Player

Hey, guys!
Not sure if this is a Flash issue or a Flash Player issue, but here we go...
I`m currently working on a Flash project with a great deal of images.
Flash does a great job compressing images, but in some cases it messes up the colors.
I have a big image on the background and it`s set to 80 compression from the Properties panel.
Everything looks fine in the stand-alone Flash Player when exporting from the IDE or even opening from disc, but when I insert the SWF in a HTML page (with SWFObject, dunno if it matters) some werid artifacts show up, and also the colors get shifted to slightly different values (I can tell since I have a background that should match the SWFs background!)...
There is a workaround, though. Setting compression to Lossless... Then everything looks EXACTLY the same both in the stand-alone player and in the browser. Just that you end up with a 900 kilo image instead of 200 and something... :|
And if you have several images that have to be treated "Losslessly", you end up with a pretty big SWF!
My other workaround was to sample the colors in the browser and modify the ones in my CSS for the HTML background.
That works well for the colors, but I still end up with some ugly artifacts, even when compression is set to 100!
And, again, the strange thing is that in the stand-alone player, everything is honkey dorey, the colors and all!
NOTE: the project I`m working on is a Flash 10 file, ActionScript 2, if that would matter...
Thank you for your time and I appreciate any suggestion/explanation!
Alex

i've had a problem before with the fps and a mac.
how big is your file?
i usually make my movies around 24 fps to keep load off of
the cpu which could make it run slower

After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.

After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.

ddmathias, I want to make sure all services are working correctly on your phone. What GPS services were you using before the update happened? What kind of issues are you having with the services? Do you get any kind of errors? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Code behaves different when SWF is in browser as opposed to stand alone player, why?

In ActionScript, I have some code that dispatches a
MOUSE_OVER event when a tween is complete. I am using Tweener for
the tween. On my Mac OSX machine, I preview the SWF file in a stand
alone player spawned from my Flash IDE, and the event is dispatched
and the behavior works as expected, but when I preview the SWF file
as embedded in a MacOSX browser, the event is not dispatched. On a
Windows machine, however, the event is dispatched both in a stand
alone player and within the embedded SWF file in a browser. The
problem seems to come particularly from the Mac OSX player.
Has anybody ever experienced this? Is the OSX implementation
of the Flash player different in a stand alone and browser setting?
Here is the code that I am using:

HMMM! Verrrrrry interesting.
Yes file size is an issue, it's a large project.
Exterenally host it?
Where could I go and do that?
I'm not familiar with this process. Can you please tell me exactly how it works?
And....that means both servers need to be up and running? Kinda sounds a bit shakey. This project needs to be strong and stand alone to go here and there. Durable.
I feel safer if its all in one piece. Bam.
You know, I noticed "FAST" and "BEST" does not make a difference to file size or quality.
Could I be wrong?
Thanks.

Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country.

Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country." I'm in Namibia and tried to change my country from Africa to USA but still the same problem. TIA

Hi Annen,
Please refer the following forum thread.
Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"
Regards,
Sumit Singh

Sync group down? All my agents from different locations offline in same time.

Now is 2014-10-17, 10:22PM EST. Portal shows all my agents from 3 different locations offline. The last sync was done at around 8:30. I've confirmed my agents are online, and they can successfully ping service. Last nite was another nightmare, it look more
than half an hour for a sync cycle. Went back to normal all the suddent at 4am early morning.
What's going on?
Thanks,
Dan

Hi,
Thanks for your reply.
The service went back to normal at 1AM EST. It was down for 4 hours 30mins. But the service interruption is just too sudden and frequence as I said it went down on Thursday (16th Oct) night as well.
Here's my sync group info.
Sync group ID : a0d2cc7b-3a3e-481f-a3b5-be26a373fd5a_Southeast Asia
Region : Southeast Asia
Date time of the issue : 17th OCT 8:30PM EST to 18th OCT 1:00AM EST
Traing ID : No error found from logs since the sync group didn't work at all. It showed all of my agents offlined. And the sync group showed "Warning"
Please let me know if you need additional info. Thanks.
Dan

HT4362 ATV1 has sync -- where it is stand alone for playback, is this feature available in atv2?

ATV1 has sync -- once done it is stand alone for playback, is this feature available in atv2?

No.

How to run stand alone executables developed with different versions of LabView on the same system

I am using LabVIEW 8.2 to develop a stand alone executable for a target system. The target system already has a stand alone executable written by another vendor, using LabVIEW 7.1. I installed the LV RunTime Engine for 8.2 which left the 7.1 engine intact (as it should). The problem I am now having is that the drivers installed on the target system are incompatible with the NI-DMM vi's that I am using. My concern is that if I replace the old drivers with the ones I am using on my development platform I may end up breaking the old software. What would be an appropriate work around to ensure that the target system will be able to run both executables? (FWIW the system will NOT be running both executables concurrently.)
The target system is an embedded PXI card cage, running Windows XP, with a NI PXI-4070 DMM (among other instruments, however I have had not had this issue with the NI-DAQmx drivers).

Hi Yerffejj,
Thanks for sharing your issue with the community. I am struggling to see what you mean by "break the software." If you only have the two executables and LV Run-Time versions 8.2 & 7.1, then you just need to go to http://www.ni.com/support/ » Drivers and Updates » Search within Results: » enter "NI-DMM" » GO to get the DMM driver you need. To see the driver you were using on the development machine, just go to Measurement & Automation Explorer (MAX). The DMM driver should also automatically install DAQmx, NI-VISA, and NI-IVI, fyi.
Best wishes to you, and please let us know if that does not solve your problem.
Regards,
Dan Richards
Dan Richards
Certified LabVIEW Developer

PI 7.0 Java stack config of the stand-alone server to new cluster system

Hi colleagues,
we have a PI installation in stand alone server (SAP with abap +
java and Oracle in the same server)
The system number of the ABAP stack is 00, and we are conecting to the
Java stack to the for example the URL
http://hostname:50000/rep/start/index.jsp
We have installed a new PI in a MSCS and in some weeks, we´ll have to
copy the database and configuration of the stand-alone server to the
new cluster system. In the SAP PI installation on the MSCS, we have
confirmed that with the ABAP stack, we won´t have any issue because the
ASCS has the system number 00 (message server), so we only have to
install a SAP system in each nodes without care these new system
numbers because we are configuring a Logon group but the question is in
the Java stack... The SCS (service in the cluster) has the 01 system
number...
What is the best way to keep the same URL to the Java stack that in the
stand-alone server? (remember:
http://hostname:50000/rep/start/index.jsp )
Have we to install a Webdispatcher in the MSCS and one Java stack in
each node of the cluster? we think that is right but we have a lot of
doubts about the URL, the files of the Java (if they are stored in
local disk in one node, how are they replicated to the second node?)
and so on....
Could you give us any suggestion to make the "migration" from the stand-alone to a cluster in a transparent way for the users?
Thanks in advanced and kind regards !!
Victor

Thanks a lot.
For information
Our central SLD is on a standalone system
However slave SLD (to ensure autonomy and HA for production XI system) will be deployed on Java separated hardware system of Xi production system.
On master SLD all systems are described and all machine are linked with it (SLDAPICUST) except production XI one
On slave SLD, all data of master one are replicated and only XI system is linked with (SLDAPICUST)

Setting Current Values as Default in Stand-Alone Application ?

Hi
I have a stand-alone application using LabVIEW run-time and I want the user to be able to make the choice if he wants to retain the default values or modify them ? I know you can't use the invoke node and set the current values to default because that works only in EDIT mode. I saw some postings where there was a talk about using configuration VIs. I am not sure how to use them. Also is there some other way I can accomplish this ?
Thanks
Sridhar
P.S: I use LabVIEW 7.0
Kudos always welcome for helpful posts

I would use a configuration file to hold default values for my controls. When the vi starts, prompt the user to select default values or to modify. You can use a two button dialog to do this. Wire the output to a case structure. If the user selects default, read the config file and use the values to set your controls values. If the user selects modify, call a subvi that gives the user an interface to modify the values. You can start with the old default values. This subvi would have a loop, waiting for the user to press either a cancel button or a change button. If the user makes changes and presses the change button, exit the loop and write these new values to the config file. If cancel is selected, exit the loop and do not write to the config file. Upon returning to the main, read the config file and set the control values accordingly. You can even go a step further and create a "factory default" file. This file would be read only. The user can be given a choice to select this file in case he made changes and saved them to the config file, and the new changes were all screwed up.
Config files are nothing more than a file containing keys which represents controls, and the data values for those controls. There are examples located at \examples\file\config.llb.
- tbob
Inventor of the WORM Global

Server side script not running on stand-alone XE

Hello,
In my application I created a Server side script (AJAX) which presents a select-list based on other fields on the page. The very same application runs on a 10g+APEX3.0.1 database AND on a standard XE+APEX2.1 database, which are both accessed via a HTTP-server. The application with the script runs fine on this platform (XP).
I have two other XP-machines on which I also installed XE+APEX2.1. Both are stand-alone versions NOT accessed via a HTTP-server. I installed exactly the same application which runs on the platform with HTTP server on both of the machines. While testing the correct functioning, I noticed that everything works ok, EXCEPT the server side script which gives me a better select list. Instead of this I get the old-fashioned version of the select-list which is not able to use the value elsewhere on the page.
I found a similar problem on the XE forum (Re: Server side scripts features ) but it doesn't answer my question how to get the script working on a standalone version of XE (= without access via a HTTP-server).
Can anybody please help me?
Thanks & regards,
Jan.
Message was edited by: Jan
J. Hulsing

Carl,
Thanks for your suggestion to install FireFox and the Firebug tool (which I wasn't aware of).
After having looked at the problem for hours, I found what I think is the problem: the htmldb_html_elements.js script.
As already mentioned, the properly functioning XE on my local PC is accessed via a HTTP-server, as well as the 10gR2+APEX3.0.1 version also running on that PC.
On the laptop, not running HTTP-server, I get the message: 
$x is not defined 
 f_21_select_kpn(input#P21_GBREKNR 405, "P21_KOSTENPOST") 
onblur(blur )
 
That is in the 'Console' of Firebug.
When changing to Script I do see a remarkable difference.
On the PC there the following text is found in the first lines of htmldb_html_elements.js:
/*htmld_elements will contain the lower level html access js*/ 
var gDebug = true; 
var gkeyPressTime; 
var gLastTab=false; 
var gRegex=false; 
var ie=(document.all)?true:false; 
if(ie){document.expando=true;} 
var gDebugWindow = false; 
/* 
$x functions have to do with either single elements or array of elements 
$v functions have to have to do with manipulating values or interaction based off a value 
$xml function have to do with manipulating xml values 
$a functions are based on ajax 
$d functions are specific dhtml constructs 
*/ 
/* begin $x functions */ 
function $x(pNd){ 
try{ 
var node; 
... 
On the laptop however the first few lines are: 
/*htmld_elements will contain the lower level html access js*/ 
 
var gDebug = true; 
var gkeyPressTime; 
var gLastTab=false; 
var gRegex=false; 
if(document.all){document.expando = true;} 
// Elements // 
 
function html_GetElement(pNd){ 
try{ 
var node; 
switch(typeof (pNd)){ 
... 
I think that the difference is in these two scripts.
But why are the scripts different: it is the same XE that is installed on the laptop and the PC. The answer I found in the images/javascript directory of APEX3.0.1 which is located in the APACHE directory-tree (you have to copy the images to APACHE when you use the HTTP-server). And indeed: the htmldb_html_elements.js has exactly the same text as what I see in Firebug on the PC. So XE on the PC is using the javascripts in the image-directory of APACHE on the PC and not the XE-version of the scripts, embedded in XE.
 
So the answer seems to be: copy the APEX3.0.1 versions of the script over to the PC and try to get them into the database. Or...???
 
Can it be loaded into the database? Will XE accept it?
 
Would be nice to have answers if the conclusion I found is the right one and if it can be fixed by loading the js into XE.
 
Best regards and thanks for your help so far.
 
Jan.

Looking for a stand alone windowmanager

Hello
I currently use KDE, it works but I want something more minimalistic, like a stand alone window manager, BUT....
The only reason I use KDE right now, is kwin, it provides opengl acceleration, and sync to blank etc which totally eliminates tearing and flickering for me, so my question is, is there any windowmanagers that is meant standalone usage which has this?

i've tried various different things and, thus far, compton is the only thing that has completely eliminated tearing for me. as was mentioned above, just take a look at compton -h, particularly:
--vsync vsync-method
Set VSync method. There are up to 4 VSync methods currently available.
none = No VSync
drm = VSync with DRM_IOCTL_WAIT_VBLANK. May only work on some
drivers.
opengl = Try to VSync with SGI_video_sync OpenGL extension. Only
work on some drivers.
opengl-oml = Try to VSync with OML_sync_control OpenGL extension.
Only work on some drivers. Experimental.
opengl-swc = Try to VSync with SGI_swap_control OpenGL extension.
Only work on some drivers. Works only with GLX backend.
Does not actually control paint timing, only buffer swap is
affected, so it doesn't have the effect of --sw-opti unlike
other methods. Experimental.
opengl-mswc = Try to VSync with MESA_swap_control OpenGL
extension. Basically the same as opengl-swc above, except the
extension we use.

Sync config b/w different location stand alone firewalls

Similar Messages

Maybe you are looking for