Sync configured on two devices OK, but nothing happens

I setup sync on my work laptop and added my home laptop device to it. When I manage my home laptops sync, I tell it to resync, taking all data from the work machine. The next dialogue tells me about all the things I am about to lose, I say OK.....and nothing. Nothing happens. I don't get the add-ons or bookmarks or anything.
Any ideas? Is there a log file somewhere?

Try a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

Similar Messages

Brand new ipod touch connected, device recognized, but nothing happens?

I bought a brand new iPod touch 2nd gen two days ago and as I was very excited to plug it into my computer, sadly, nothing happened. iTunes recognizes the device and can be seen under Devices, but NOTHING happens and there are no other functions to click on at all. No set up, just a blank white screen, and yet, the iTouch screen still says to connect it to iTunes which it already is....
I have reinstalled iTunes, restarted my computer many times, updated it to the latest iTunes version, and still this problem persists. Can anyone help me out please!
Thanks in advance.

I would start with these:
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1495

Debug on device running but nothing happens with the app

I've got all certificates and provisioning profile installed.
Build is ok, my app is installed on my iPhone device.
When I click Build and Go debugging is activated, I see on xcode status bar "GDB: Running", I see the app is expanded but it does no go any further. Black screen remains on device (with iPhone top status bar), breakpoints do not fire (init, applicationDidFinishLaunching).
If I start the app from iPhone just clicking on icon - it runs ok.
Any advice?

If the light is flashing amber when you try to use the remote, you may have accidentally unpaired it when it was previously paired or paired another remote with the unit. You can reset the pairing (unpair) by pressing the rewind and menu button together for 6 seconds.
This link shows you how to pair the remote.
Apple TV: Remote causes LED to flash amber

HT1719 My itunes doesn't list "devices" above the playlist. How can I sync the music I have purchased to my new ipod shuffle if it doesn't give me the option? The shuffle is plugged into my computer, but nothing happens. Help please!

My itunes account doesn't list "devices" above the playlist, as the syncing instructions give. How can I sync the itunes I have purchased & downloaded to my computer, to my ipod shuffle? The device is plugged into my computer, but nothing happens. Shouldn't the computer recognize the device? It doesn't. Please help!

As a test, shut down your computer and disconnect ALL USB devices. Do this procedure to Reset the shuffle
http://support.apple.com/kb/HT1655
Start up computer with nothing connected, except for standard keyboard and mouse (if it's not a laptop). Run iTunes. Connect shuffle to a direct USB port on the computer. See if there's any improvement,
If the shuffle is now recognized, there may have been a USB device conflict previously, or maybe all of the devices connected at the same time overloads the USB bus (for power). An iPod charges its battery while connected, so it is a high-power USB device.

My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!

My iPad 2 won't charge and it's completely shut down. I've tried pressing the two buttons simultaneously, but nothing works. It's driving me crazy! Any offers of suggestions would be greatly appreciated. Thanks!

1. The most efficient way to charge an iPad is with the charger that came with the iPad and having that plugged into a wall outlet. Trying to charge while connected to a laptop often doesn't work because the USB port may not provide enough power.
2. Once an iPad battery has completely drained it may take an hour or more on the wall charger before the iPad responds. So after an hour on the charger reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
3. If the iPad still does not start up make an appt at the Apple store. It will be far better if you have an appointment rather than just walking in because those with appointments will be taken care of before you are.

When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

I am on mobileme, my ical are syncing between my two powerbook g4 but are syncing to my iphone4 or ipad, anyone knows of an solution to this issue.

i am on mobileme, my ical are syncing between my two powerbook g4 but are syncing to my iphone4 or ipad, anyone knows of an solution to this issue.

What model powerbook? Scroll down to the Quality section of this link http://en.wikipedia.org/wiki/PowerBook_G4
 Cheers, Tom

Hi, I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it?

I am trying to connect a WD Mybook for Mac to my airport/time machine device. On the AirPort Utility it listed under Disks at 0 Mb. I enabled file sharing. And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens. If I plug it directly into my MacBook it works fine. How do I fix it? Also, its connected via a powered usb hub.

I assume that you are using Mac operating system 10.4.11, as your profile indicates.
The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.

I tried to sync my iphone4 to my pc (not mac) and the following message went out: I tunescould not back up the iphone because an error occurred I restore my phone but nothing happened. What shall I do? (my ipad is working perfectly)

I tried to sync my iphone4 to my pc (not mac) and the following message went out: I tunescould not back up the iphone because an error occurred I restore my phone but nothing happened. What shall I do? (my ipad is working perfectly when i sync it)
I dont know why this happens.

Unfortunately, "because and error occured" doesn't give you much to go on. Some general things I would try if you haven't already:
Use Disk Utility on your mac to repair disk permissions, then reboot and try backing up again.
Use Finder to go to ~/Library/Application Support/MobileSync/, then control-click on the Backup folder and select Get Info, then check Sharing & Permissions at the bottom and make sure your username has read & write priviledges
Try closing all apps, then reset your phone: double-tap the home button, tap and hold the apps at the bottom until they wiggle, tap the minus sign on all apps to close them. Then reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), and release
Try a different usb to dock connector cable; ensure that your case isn't interfering with a good connection to the dock connector at the bottom of your phone; clean the dock connector at the bottom of your phone (e.g., with a dry toothbrush); troubleshoot your usb connection (http://support.apple.com/kb/TS1286)
I know this looks like a laundry list, but unfortunately it's hard to isolate the problem without a clear error message. If the problem persists, you might try posting in the iMac or iTunes forums for other ideas.

My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot.

My ipod nano was working fine until i uploaded some new tunes today. It sync properly and once disconnected it just switched off and would not even turn on. I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod.

The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.

Hey i just pulled my old ipod nano out of my attic and it doesnt seem to turn on i charged it for two days but nothing happened

hey i just pulled my old ipod out of my attic and it doesnt seem to turn on i charged it for two days but nothing happened does anyone know the problem?

Given that it probably hasn't been used in years, it's likely that the battery is shot and in need of replacement. However, the damage may be more than that, since it won't even power on, so it's hard to say for sure.
B-rock

HT201401 just brought a new iphone its instructing me to sync with itunes, i connect it to my computer computer reacts but nothing happens on the phone or itunes

just brought a new iphone its instructing me to sync with itunes, i connect it to my computer computer reacts but nothing happens on the phone or itunes, help before I break my laptop and phone, rage!

First, make sure you have the latest version of iTunes on your computer (11.x). If you connect the phone to a USB port directly on your computer (NOT to a USB hub) and it still doesn't appear in iTunes you need to troubleshoot iTunes.
If you have a Mac see: http://support.apple.com/kb/TS1591
For Windows see: http://support.apple.com/kb/TS1538

Had to update ipod touch..went to sync but nothing happened!

Hi!
I wasn't sure where to go to ask this...but I had to download the lastest version to my ipod touch..after it finished updating, I went to go sync it. When syncing was completed, I went to go see if an app that I had bought from the itunes store had downloaded back to my ipod. But nothing happened. Do I need to buy this again? and if the app that I had purchased is still under my account, where do I have to go in order to sync it back on my ipod?

aaaahhhhh....i think i just found the solution actually thanks lol

Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

Hi everyone, I was wondering if someone can help me. I recently got my first ever Ipod. It's the new Ipod Nano 7th Generation. I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens. I have tried uninstalling & re-installing Itunes but this didnt help.
Does anyone have any ideas?
Thanks for your help.

I think the problem is that the iPod got set to Manually manage music and videos. It needs to be set up for automatic syncing again. Just unchecking that Manually manage music and videos setting does not do it.
In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen. In the sidebar (along left side of screen), there are two headings (Settings and On My Device). Under Settings, click on Music. To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
Check the box at the top for Sync Music. That turns ON automatic syncing for music. Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod). Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below. Then click Apply.

HT4718 I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts?

I can't reach recovery system when I reboot- I press 'command' and 'r' quickly, but nothing happens, the progress bar begins to load... Any thoughts? It gets about halfway through loading and then stops, no mouse, no nothing. I think I'll be able to move past it if I can reach the Recovery options.
Thanks!

If you are really sure that it's impossible to click in Recovery mode, then something is wrong with the machine.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Sync configured on two devices OK, but nothing happens

Similar Messages

Maybe you are looking for