Sync CROD with Sharepoint Server 2007
Is it possible to somehow sync automatically contacts between CROD and Sharepoint Server 2007? What I would like to do is that contacts are exported and sync auytomatically each time there is a new contact from CROD to SS2007.
I would recommend posting this question on the CRM On Demand Integration Development forum.
Similar Messages
-
syncing my iphone 3gs with exchange server 2007. Is there a way to delete from iphone, without it deleting from my outlook ?
iCloud does not sync which apps are installed on each device. Deleting an app off of one device has no effect on the others.
-
Does the BO Sharepoint 2007 Integration kit work with Sharepoint Serv 3.0?
Hello,
I have seen several posts about this topic but I still have not come to a correct conclusion. I have Windows Sharepoint Services 3.0 and BO Crystal Reports Server XI R2 SP3. The getting started documentation for SP3 specifically says the portal integration kit can be used with "MS Windows Sharepoint Services or Sharepoint Server 2007". However when I try to install the the integration kit I receive an error "Microsoft Sharepoint Server 2007 is required to install the Microsoft Sharepoint Integration Kit".
Is this true? Do I have something setup wrong or is the documentation incorrect and only Sharepoint server 2007 is supported?
It shows WSS as compatible in this document http://www.businessobjects.com/pdf/solutions/microsoft/bo_microsoft_interoperability_final.pdf
Any clarification would be helpful as I have wasted 1+ days trying to figure this out. I just need to know if Sharepoint services and the Sharepoint integration kit will work together with Crystal Server XI R2 SP3.
Thanks,
RyanHello Ryan,
I recommend to post this query to the [Integration Kits - Other|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the other BusinessObjects Integration Kit.
This forum is dedicated to topics related to other BusinessObjects Integration Kits, including Siebel, Baan, PeopleSoft, and JD Edwards.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk -
Install and configuration on the SharePoint server 2007 issue
Hi All,
I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
Echo Deactivating LiveCycle Connector feature with WSS
%STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Deactivating LiveCycle Workflow feature with WSS
%STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
Echo Uninstalling LiveCycle Connector with WSS
%STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
Echo Uninstalling LiveCycle Workflow with WSS
%STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
Echo Copying source files to WSS \TEMPLATE directory
xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
Echo Copying Feature Resource files to WSS 12\Resources directory
xcopy Resources %RESOURCESDIR% /e /y /i
Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
Echo Installing LiveCycle Connector with WSS
%STSADM% -o installfeature -filename LiveCycle\feature.xml -force
Echo Installing LiveCycle Workflow with WSS
%STSADM% -o installfeature -name LiveCycle/Workflow -force
Echo Activating LiveCycle Connector with WSS
%STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
Echo Activating LiveCycle Workflow with WSS
%STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
Echo Restarting IIS worker process
IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol SahareThis might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138 -
Enterprise Search using Sharepoint Server 2007 + SAP R/3
Hi experts,
I want to achieve an enterprise search using SharePoint Server 2007 (MOSS).
SharePoint includes the BDC (business data catalog) which allows you to communicate with the SAP System.
I read in the Microsoft whitepapers that thereu2019s a need for a web application server 6.40.
So here is the problem:
We have SAP R/3 Enterprise 4.7 with WAS 6.20. We donu2019t want to change or upgrade the SAP system.
There are ways to connect the WAS to the R/3 system e.g. RFC.
But does this still work for search in SharePoint?
Did anybody already deal with this problem?
Any other ideas connecting SharePoint to SAP in this scenario?
Best regards
Philipp Detemple> and having requirement to upgrade OS version from B.11 to B.23. Currently server is hosting SAP R/3 Enterprise version.
So you upgrade HP-UX 11.11 to HP-UX 11.23?
> I have tried to serach SAP service market place for PAM, but could not find specific information on version upgrade from B.11 to B.23
Yes - because there is no HP-UX 23.x, only 11.23 and 11.31. For the version overview check
Note 939891 - HP-UX: End of Support Dates
Note 1075118 - SAP on HP-UX: FAQ
> My Questioin is: If we copy system as it is to new host and if we keep the same Kernel Patch 196, will it work fine or give issue?
It will work.
> So even if I got for latest patch 304 which is released on 16.11.2009, still the OS version for which it built is B.11, so if we have B.23, will it work? I would not see the possibilities of kernel upgrade at this stage.
Why no possibility for a kernel upgrade if you install a new server?
> so with same kernel will it work? What else I need to check for the migration and make sure that everything works fine on new server.
Check
Note 831006 - Oracle 9i installation on HP-UX 11.23 and 11.31
Markus -
What do I need to install Integration Kit for SharePoint Server 2007
What do I need to install the Integration Kit for Microsoft Office SharePoint Server 2007? It gives me an SP3 needed error but does not tell me what SP3. Has any one sucessfully installed this kit? Please help.
Hi,
The sharepoint PIK is available for BO enterprise only. SP3 is refering to BO enterprise XIR2 SP3. This Service Pack is not available for CR 2008. In order to integrate CR 2008 in BO enterprise XIR3 you need to install SP0 on top of CR 2008. But as I said above without BO enterprise you won't be able to use the PIK.
I copied the following system requirements from our Install Guide for BOE XiR3 PIK:
System requirements
For a list of system requirements, consult the Platforms.txt file included
with your product distribution. For additional important information that may
pertain to your deployment, it is also strongly recommended that you consult
the Release Notes included with your product distribution.
In general, the following components must be installed and configured
correctly before you install the BusinessObjects Enterprise XI 3.0 Portal
Integration Kit:
u2022 Microsoft Windows SharePoint Services or Office SharePoint Portal
Server 2003.
u2022 BusinessObjects Enterprise XI .NET SDK (on your SharePoint machine
or machines).
u2022 Microsoft Windows Server 2003 (any edition).
u2022 BusinessObjects Enterprise and Crystal Reports (on either the same
machine and/or on a different machine).
Kind regards,
Tim -
Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise
I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
RussIt appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ -
How to setup microsoft outlook 2011 with exchange server 2007
How to setup microsoft outlook 2011 for Mac with Exchange server 2007?
The folks who set up the Exchange Server should be happy to help you.
-
I have problems to connect iCal 6.0 (Mountain Lion) with Exchange Server 2007
I used ICal with Exchange Server 2007 without problems with Lion. After I adopted Mountain it has been impossible to use ICal and I have obliged to use Outlook because It was not possible to connect ICal with Server.
I reinstalled Mountain and rebuilt Outlook data base, canceled cache and so on but without results. How cn I do?I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out. -
Hidden Contact Subfolders are visible on iPhone after sync with Exchange Server 2007
Hello,
We have encountered an issue where synchronizing the iPhone with Contacts from an Exchange Server 2007 mailbox, causes hidden contact subfolders (from Outlook) to be visible and appear in the Groups list in the Contacts App on the iPhone. This does not occur with Exchange Server 2010 mailboxes.
We have a 3rd party application that creates hidden subfolders in the default Contacts folder on Exchange Server 2007 mailboxes. The hidden folders do not display in the Outlook client, Blackberry or on an Android phone. We did see that they were showing up in Outlook Web Access until we applied this Microsoft Exchange Server 2007 Service Pack 3 Rollup 2 patch unto the Exchange server:
http://support.microsoft.com/kb/2210042 - A sub contact folder is still visible after you set the "PR_ATTR_HIDDEN" attribute to "True" in an Exchange Server 2007 environment.
After the patch was applied, the hidden contacts do not show up anywhere else. However, when we synced the mailbox to an iPhone and synced existing contacts, all of the hidden folders appear in the Contact Groups list. Is there a way to hide the hidden sub contact folders on the iPhone and prevent them from appearing in the Contact Group lists?
Any help provided would be most appreciated.
Thanks and Best RegardsHi SBuchan,
I have an open case with Microsoft about it. It is an issue with ActiveSync in Exchange 2007 that sends the hidden objects. Microsoft tried to resolve this in Exchange 2010 by sending a delete message after sending the hidden objects to remove them from the device. Am awaiting to see if they will approve a design change to Exchange 2007 ActiveSync to prevent the synching of hidden objects. -
Agenda Syncronization with Exchange server 2007
I am unable to syncronize the agenda throug iSync...
I am trying to connect to an Exchange Server 2007 OWA, which default url is:
https://server/owa
We are using windows authentication too...
The Agenda and iSync don't show any kind of error... it just won't sync...
Is there anything else i can do?iSync is for syncing Contacts and Calendars to mobile phones and PDAs.
It doesn't actually sync with any Exchange Servers (although, once setup, you can use the iSync menu bar item "Sync Now" to manually initiate a sync - that's all).
Are you referring to the "Synchronize with Exchange" option in the *Address Book* application?
If so, the *Address Book* forum is here:
http://discussions.apple.com/forum.jspa?forumID=1223 -
Mail / Calendar with Exchange Server 2007
Hi all,
We have a problem with Apple Mail and Calendar (Mountain Lion) connected to an Exchange Server 2007.
Apple Mail for no reason doesn't show the available data on the server. At first all goes right but after a few hours the data get corrupt. Folders disappear, mails aren't shown, ... The folders and mails are there in the server. I can check that with Outlook for Mac or on a collegues machine on Windows.
I tried:
- deleting the mail cache and mail data and restart
- removing the accounts and setting them up again
- creating a new user and trying mail in that user
None of those solved my problem.
Apple Calendar doesn't sync its data correctly. Example:
I create an event in calendar A. From that event I onvite calendar B to join the event. So far, so good. Everything just syncs fine. Then for some reason I delete the event from calendar A. In the server the event is still there. I checked in Outlook. This error is reproducable.
I tried:
- naming the user to <WORKGROUP>\<user>
- deleting the calendar cache and calendar data
None of those solved my problem.
Can anybody help me with this?Hi and Welcome to the Forums!
The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Office 365: Prgramtically sync Calendar with SharePoint team site calendar
Hello everyone,
I need to sync office 365 Calendar with SharePoint team sites Calendars. We have SharePoint online site which having multiple sub sites, each sub site has a calendar control and we need calendar controls need to be sync with the outlook calendar available
on top bar of office 365.
We need to do it programmatically as we have more then 200 hundred sub sites, please guide me on this that how it is possible using developer app or PowerShell commands.I think it might help to clarify what you mean. When you say "Office 365 Calendar", what you really mean is the Calendar associated with whomever is logged in, stored in Exchange. When you see the "Calendar" link in the little bar at the top of the page,
that's actually just a link to the Outlook Web Access calendar for a particular user's calendar stored in the Office 365 Exchange server. It's exactly the same calendar that would show up if a user had Outlook installed on their local computer and opened it
up and looked at the calendar.
That being said, you aren't going to want to synch every calendar in your whole SharePoint site with a single user's calendar. I think there are a couple approaches for you:
Create a calendar overlay in SharePoint, which displays other calendars on the current calendar view. Unfortunately, there's a limit as to how many calendars you can do this for, it's far less than 200.
Allow users to create calendar overalys in Outlook. This is the same idea as what you're doing in SharePoint, except users are doing this within Outlook. Again, adding 200 overlays isn't practical.
You can try creating an additional company calendar in Exchange that's not tied to a particular user, but then you'll have to run a timer job to keep the Outlook calendar in synch with the SharePoint calendar. This is a lot more cumbersome than just displaying
the SharePoint calendar, since you're physically copying events over to the Outlook calendar. If you do that, you personally are responsible for keeping the two calendars synched up, rather than just displaying an Exchange calendar in SharePoint, or displaying
a SharePoint calendar in Outlook.
You might looking into third party tools such as
http://www.boostsolutions.com/calendar-rollup-feature-list.html. (I haven't tried that product, it just looks like it might be the type of thing to check out.
If I have any advice, I would recommend as much as possible creating views of calendars, not actually trying to synch data, unless you're doing a one-way synch. (Synching calendar data can be a little bit difficult because you have reoccurring events to
take into account.)
Blog:
blog.beckybertram.com |
RSS | @beckybertram |
SharePoint 2010: Six-in-One -
Is there a way to sync Pre-MS Exchange Server 2007 (Service Pack 1) Calendar?
Hello all,
I think my company must be using Pre-Microsoft Exchange Server 2007 with Service Pack 1 for our exchange server, because
I can only set up company Exchange account on MS Entourage, not the new Outlook
I can only set up the same exchange account only on iPad and iPhone (able to view in Mail, Calendar, Contacts & Reminders)
But
I am unable to use Lion's Mail, iCal and Address Book to see my Exchange account
For the moment, I am not really concern about mail and addresses,
but can I see my Exchange calendar on my desktop iCal? How do I set it up?
I guess the most obvious and straight forward way, for now, is to view on my iPad :-) But it is really funny that the iDevices are backward compatible but yet Lion OS cannot...
Thanks and cheers.Hi,
Yes it will work, it says enterprise because it works there as well.
Thanks
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Updated to 10.6.3, can no longer sync iCal with Exchange Server
My syncing with our exchange server used to work fine. I updated my 3 Macs and now they all have the same issue. They will not sync with the server and they all show 4 notifications that have not yet been responded to. When I view the notifications, they are all for old entries. I accept all 4, but doesn't seem to work - still shows iCal offline. Anyone else having this issue? Any suggestions? I tried removing the calendars cache file and plist files.
I spent an hour on the phone with Apple today, got elevated to an engineer AND talked to a Server Guy at my University.
The cause is still unclear, but the remedy has become painfully clear. To have a working copy of iCal, Mail, and AddressBook, one needs to remove all three accounts from the three client apps, and restart from Mail. This approach is the only way to preserve correct links among the three client apps.
I got iCal working temporarily by deleting my Exchange account and rebuilding it. The problem is that by rebuilding an iCal account, it created duplicate accounts in Mail and AddressBook. Also, the Apple apps autodiscovered slightly different server names, which caused problems sending me and I was getting duplicate email messages as well as contacts and calendar events. I deleted the redundant mail and contact accounts, but continued to have problems with sending mail and I lost my ToDos in Mail. So, I bit the bullet and have blitzed all my exchange accounts on my MBP and am waiting for it to repopulate the 5+ GB of data. Then tomorrow, I will do the same on my iMac.
Sheesh!
Maybe you are looking for
-
I have an ipod classic and ipod touch. My itunes won't sync the classic so I can transfer the songs to my touch. It already says I have authoization do to so and have followed the pop up instructions. How can I transfer my songs?
-
Hi list, does any one know how I can get the row number the same as what I have in column rowno? thanks Arvin REATE TABLE dbo.temptable ( y int NOT NULL, e int not null, c int not null, rowno int not null) /* insert values */ INSERT INTO db
-
Getting album art for imported music
I imported my wma music when I switched to iTunes. However, only one or two of the imported albums have album art. I enable the automatic album art retrieval tool in store/preferences, but I am still not getting album art on the imported music. I als
-
Restoring Messages from 6085 to N73
I have upgraded my 6085 to N73 recently. I am not able to restore the messages from 6085 Backup file to N73. The required Messages in 6085 are in folder "Saved Items" but the name of the similar folder in N73 is "My Folders". Pls provide me a solutio
-
Premier elements keeps crashing
i am having trouble with premier elements 12, every time i save a new project.. it crashes when i eventually find the locating folder and try to play it ??