Sync Error :CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB

Very frustrated with BB Link, I keep getting sync error:
CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB
Does anyone know how to fix this?
Thanks
Tom

Although this shows for a different version of Link it is the same error and the only info available:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
If you do not have this version upgrading may help:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

Similar Messages

Cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB

I'm getting this message when trying to sync my BB calendar with Outlook 2010 ver 14.0.7153.500 SP2 MSO cpreferencesmanager configuration value for /Preferences/Account_1_65538/SyncAccountId_2 not set in TransConfig.xml for Translator Rim BB Is there a fix for this? I'm a new owner of the BB Classic 10 Thank you.

Although this shows for a different version of Link it is the same error and the only info available:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6B27934ACA9100D504829F8506B4AFE3?...
If you do not have this version upgrading may help:
https://swdownloads.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

"Device Pin not set in TransConfig.xml.for translator RimBB" message when I try to sync my BBZ10 with Outlook Calendar and Contacts

Hello, Does anyone know how I can sync my BBZ10 with my computers Outlook Calendar and Contacts? It was working but since my computer returned from being repaired it doesn't sync and gives me the following message
"Device Pin not set in TransConfig.xml.for translator RimBB"

I did resolve it, it was so long ago but here's what I suggest:
-First remove the software on your computer by going to the add/remove programs if you're using a PC. If you're using Mac, I'm not sure where you go.
-Then go to BB website and download the correct program for you phone
-Check both your phone and computer have all their updates
With the newest updates I have no trouble syncing my calendar/contacts from my PC to my BB and vice versa. It was just initially when the BB was so new they hadn't updated the programs. Over time the fixed the glitch, this is why I recommend you remove the program you have and start over, it will probably fix itself.

Issue with sync error: Sync encountered an error while syncing: Unknown error. Sync will automatically retry this action.

Hi, i have just recently started having an issue with Sync on my desktop. My associated Android and Mac Laptop do not experience any issues when attempting to sync, but the desktop constantly gives the same error. I have tried unpairing the desktop, clearing all files, restarting and then adding the desktop to sync once again, but the error persists.
All of the bookmarks on the desktop have vanished, but are still in my sync data and have no problems being viewed on the other paired devices. This also tells me that the issue isn't the sync server and is something unique to the desktop machine.
I am hoping that this won't require a reinstall, but if all else fails, it is an option. I will try to attach a log file once i have submitted the question.

I agree. Too many issues lately with sync errors and flash crashes. I'm going back to Google Chrome for a few months. Don't have time to be bothered with the nonsense and slow fixes.

SYNC ERROR 2

SYNC ERROR:
CPreferencesManager::save:File not found: C:\Users\Me\AppData\Local\Research In Motion\BlackBerry Desktop\XCPCSync.OEM\SyncSDK.209.601\Translators\MSOL\TransConfig.xml
(After upgrading desktop manager, and a clean uninstall and reinstalling following error @ line 140 in .\Errorr.cpp. See thread Sync Error)

work around
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB32032&sliceId=2&cm...

Sender file adapter - Can I use *.xml for the file name

Hi Gurus,
I have some interfaces where I need to pick the file from a directory. The name of the file will have Data<i>time stamp</i> as the naming convention. Can I use *.xml to pick up my files from this directory?
The help.sap.com documentation says that we can use this naming convention.
<b>
● File Name
Specify the name of the file that you want to process. The name can contain placeholders (*, ? (placeholders for exactly one character)) so that you can select a list of files for processing.
</b>
I tried using *.xml for my file name in the communication channel, XI is not picking up this file.
Please let me know if you have the solution.
Thanks
Kalyan

Murthy,
Thanks for the reply.
I am using GuildFTP tool as my FTP server. In this tool, all the permissions were given for the file to pick up.
The status of the file is good.
Where in the file adapter configuration I have to select 'Read-only'?
The file adapter is working perfect with the exact name of the file.
Thanks
Kalyan

Publish Error: .Mac Publish Configuration Values

Ever since the update to OS X 10.4.7, I have been unable to successfully publish any changes to an existing iWeb site. Whenever I try to publish I get a dialog box with the following:
Publish Error
There was an error determining the .Mac publish configuration values. Please try again in a few minutes.
No matter how many times I attempt to re-try the Publish, I get the same message. I have checked the configuration of my .Mac preferences and everything looks fine (I am able to sync with .Mac without any problems).
Does anyone have any ideas?
Thanks,
- John
20" iMac G5, 2GHz, 2GB RAM Mac OS X (10.4.4) iWeb 1.1.1

OK... here's an update. After successfully getting iWeb to publish using another WiFi network (as opposed to my home satellite internet connection), I decided to see if I could force iWeb to get its act together and complete a publish at home.
I WAS SUCCESSFULL! At least partly....
Here's what I did. Follow these steps at your own risk:
(1) With iWeb closed-down, I went to the location of the Domain file that stores all of the iWeb files and data (found in your Home folder under Library/Application Support/iWeb)
(2) Copied the file as a safety backup
(3) Right-clicked (or <CTRL>-clicked for single-button mouse users) and selected the "Show Package Contents" option
(4) In the resulting window, I highlighted and deleted the following items:
- The "cached_resources" folder
- assets.xxx.plist (where xxx is your .Mac username)
- deletedComments.xxx.plist (same explanation for xxx as above)
- ServerCachedResources.plist
- sharedassets.plist
(5) I then re-launched iWeb and triggered a "Publish All to .Mac" AND IT WORKED!!! Without a hitch!
Once the publish completed, I tried making a small text edit to a single page and then re-publishing.... but then I got the "Can't publish xxx file, try again" error. It appears that, over a satellite internet connection at least, iWeb is unable to overwrite a file that already exists on .Mac successfully without performing all of the above steps.
So... I went back in and repeated the same steps as above. Unfortunately, that resets iWeb into thinking that everything has been successfully published, so in order to get my small text change up, I had to "Publish All to .Mac" again... a bit tedious to have to upload the WHOLE site just to get one small change posted... but better than having to FTP files separately!
So... Apple... if you're listening, it seems that there is definitely an issue with iWeb publishing to .Mac over a high-latency network connection. PLEASE DO SOMETHING!!! I am reading that iWeb 2.0 is already in the works... with lots of enhancements, etc. I sure hope that PUBLISHING is one of them!
Hope this information helps someone else out there. Just be careful... I'm not happy having to mess around in the innerworkings of iWeb's files... and I'm not sure what the long range ramifications could be. Proceed at your own risk!
- John
20" iMac G5, 2GHz, 2GB RAM Mac OS X (10.4.7)

ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.

DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it.

Bug report: Possible reason for Creative Cloud sync error

Perhaps this helps someone in resolving/eradicating some "unexplained" sync errors.
I recently had a persistent sync error for five third-party images in a folder. It made no difference if I transferred the images via another method to my second computer: the error then simply occurred on both computers.
All the files are okay (not corrupt) but after some investigation, I discovered they had something in common:
All files had a creation date of 1 January 1970 01:00
(German OS-X 10.9.1 system, so probably 00:00 GMT, i.e. Unix epoch time).
Resetting the creation date via the terminal to a recent date, e.g.
> touch -t 201402171000 filename.jpg
resolved the problem and the files then synced.
I hope that helps for future versions of CC.
Best regards,
jools

The attached patch for db-4.7 makes two changes:
it allows enough for each bucket to have the configured number of threads, and
it initializes env->thr_nbuckets, which previously had not been initialized.
Please let us know how it works for you.
Regards,
Charles

Publish error - error determining the .Mac publish configuration values

I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
Thanks mucho!
MacBook 2GHz, 2GB Mac OS X (10.4.8) shipboard satellite internet connection

Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

SQL Error: ORA-12899: value too large for column

Hi,
I'm trying to understand the above error. It occurs when we are migrating data from one oracle database to another:
Error report:
SQL Error: ORA-12899: value too large for column "USER_XYZ"."TAB_XYZ"."COL_XYZ" (actual: 10, maximum: 8)
12899. 00000 - "value too large for column %s (actual: %s, maximum: %s)"
*Cause:    An attempt was made to insert or update a column with a value
which is too wide for the width of the destination column.
The name of the column is given, along with the actual width
of the value, and the maximum allowed width of the column.
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.
*Action:   Examine the SQL statement for correctness. Check source
and destination column data types.
Either make the destination column wider, or use a subset
of the source column (i.e. use substring).
The source database runs - Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
The target database runs - Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
The source and target table are identical and the column definitions are exactly the same. The column we get the error on is of CHAR(8). To migrate the data we use either a dblink or oracle datapump, both result in the same error. The data in the column is a fixed length string of 8 characters.
To resolve the error the column "COL_XYZ" gets widened by:
alter table TAB_XYZ modify (COL_XYZ varchar2(10));
-alter table TAB_XYZ succeeded.
We now move the data from the source into the target table without problem and then run:
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));
-Error report:
SQL Error: ORA-01441: cannot decrease column length because some value is too big
01441. 00000 - "cannot decrease column length because some value is too big"
*Cause:
*Action:
So we leave the column width at 10, but the curious thing is - once we have the data in the target table, we can then truncate the same table at source (ie. get rid of all the data) and move the data back in the original table (with COL_XYZ set at CHAR(8)) - without any issue.
My guess the error has something to do with the storage on the target database, but I would like to understand why. If anybody has an idea or suggestion what to look for - much appreciated.
Cheers.

843217 wrote:
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.You are looking at character lengths vs byte lengths.
The data in the column is a fixed length string of 8 characters.
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));varchar2(8 byte) or varchar2(8 char)?
Use SQL Reference for datatype specification, length function, etc.
For more info, reference {forum:id=50} forum on the topic. And of course, the Globalization support guide.

Cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?

cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.

Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh

Error in parsing value for ... Declaration dropped.

Hi,
I'm using Fedora 16. Everything is working perfect and Firefox was working perfect (version 9). But version 9.0.1 creates big problems for my intranet and webpages, including yours. The error console fills up with 100' of error messages like; 'Error in parsing value for '(background, display, moz-opacity, filter...)' . Declation dropped. Some tags (on my intranet) like fontsize are "bigger", it seems like Firefox skips my CSS settings, the same for some CSS page layouts. One page example is that one only dropbox fontsize is displayed correctly, the other 17 are not CSS formatted.
I have done all your posting regarding to solve problems, reading all posting but nothing helps.
Ny own research for the problem
Switch to the web browser Konqueror, everything about layouts and fonts displays properly (other things like '-moz-border-radius' is of course not working.
I also have a windows computer with Firefox 9.0.1. Everything is displayed properly with the same amount of error messages as in FF for Linux! The same goes for Internet Explorer 9 in windows (everything displays properly).
Confusing. Is it a Fedora problem or FF for Linux problem?

I found a solution to the problem. Uninstall Firefox and Firetray. Delete /.Mozilla folder. Reboot. Install Firefox. Now everything is displayed properly.

Sync Error :CPreferencesManager: configuration Value for /Preferences/Account_3_196609/DevicePin notset in TransConfig.xml for translator RimBB

Similar Messages

Maybe you are looking for