Sync error: CRTranRec::GetLinkedRecordId : Invalid linked record Id

Hi,
I have a blackberry bold 9930 and the following error message appears everytime i want to sync my cellphone with blackberry desktop software on my PC - Organizer date : "Sync error: CRTranRec::GetLinkedRecordId : Invalid linked record Id".
Help please !
Jose Carlos

Hello jcvc00
Welcome to BlackBerry Support Community Forums
To resolve your problem you may have to check your address Book and see if you have any blank contact image.Look at this RIM's Knowledge Base regarding this error :
KB31008 : Error "CRTranRec:: GetLinkedRecordId : Invalid linked record Id" is displayed when synchronizing with the BlackBerry Desktop Software.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Error "CRTranRec:: GetLinkedRecordId : Invalid linked record Id" is displayed when synchronizing with the BlackBerry Desktop Software

When synchronizing data using the BlackBerry Desktop Software the following error is displayed:
CRTranRec:: GetLinkedRecordId : Invalid linked record Id
what to do?
many thanks in advance

Hi crugnola
Welcome to BlackBerry Support Forums
Please check your address book if you find any contact with blank images then add an image to those contacts ,it will fix this sync error , have a look :
KB31008 : Error "CRTranRec:: GetLinkedRecordId : Invalid linked record Id" is displayed when synchronizing with the BlackBerry Desktop Software.
Or head over to this thread Cleanly "Starting Over" with the Desktop Software (non-BES) and start all over again or within that thread on post #15 there is a link to older version of BlackBerry Desktop Software , download version 6.1 it has help many user that I know from this error.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi!
Need some help with the same:
Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi sameer197301 and welcome to the BlackBerry Support Community Forums!
To clarify, are you seeing this message displayed on your BlackBerry® smartphone or on your computer?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Z30 sync error: CRTranRec : : GetFieldTemplate : Database is corrupt

My Z30 just popped this error message up when syncing calendar (to outlook) - syncing contacts is ok, apparently.
help, please.

I asked as I had found this issue on a Mac but could not find for PC
I have little knowledge for MS Office 365 and Outlook but did find this info which might help.
http://www.howto-outlook.com/faq/usingscanpst.htm

Sync Error when synching phone book with Outlook Express

I have around 4909 contacts on my phone when i sync it prepares sync review for all 4909 and when we select add it starts to read upto 4900 then gives the below message
Error CRTranRec: : GetLinkedRecordId : Invalid linked record id
and the sync is incomplete and only  few 200-300+ contacts get updated in Outlook 2007.
Also if i sync only Calender, Task and Memos the Sync is complete
Please advice !!!!

pjthakker wrote:
request your technical team to find a remedy @ the earliest as without sync its causing a lot of inconvenience.
Please refer to this information which is at the top of every page on this site:
This is a user-to-user community, not a user-to/from-BlackBerry channel for any formal communcations whatsoever.
FYI...that error has been experienced by many. Your search of other threads on this site may well reveal to you other resolutions that may well work for your situation.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BOLD 9900 sync error (II)

Hi, for a second time in less than a month I've got a sync trouble between my new bold 9900 and the BBerry Desktop Software for PC. This time the popup window shows the following alert:
CRTranDB::AddNew : Duplicate record Id - E3F0DCEE
¿?...I've got no idea how to proceed...
Thanks in advance
Roberto

Hi allen2998,
Welcome to the BlackBerry Support Community.
This KB article provides some information on the error message you are receiving when synchronizing. "Error "CRTranRec:: GetLinkedRecordId : Invalid linked record Id" is displayed when synchronizing with the BlackBerry Desktop Software" http://bbry.lv/QootNr
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Execute Work Item: Invalid Link (SWN155) for WD ABAP task ?

Dear all,
I have created a workflow task with WEBSERVICE object and configured task visualization with WD ABAP application.
When i am executing the work item through SAP Inbox , the application is triggering successfully.
But when the work item is transmitted to Outlook through Extended notifications configuration i am getting the error
Execute Work Item: Invalid Link (SWN155).
We have already implemented the 1381164 and 1164090 OSS notes.
We don't have UWL, the link need to be opened the WD application directly.
I am unable to find the error.
Please help to solve the issue.
Thanks,
Vamshi

Hi,
Have you checked OSS for possible fixes? It might that this was something that was clearly a bug, and not matter what you do, it will not work, unless you implement some fix.
Regards,
Karri
PS. The note is 966681
Edited by: Karri Kemppi on Oct 27, 2009 9:26 PM

I got "Invalid link" when I to reset my security questions from rescue email. Moreover when I log in into my Apple ID and click on Passwords and Security I'm thrown out with the message "An unknown error has occurred".

Here is my problem:
Need to change my email with the one that currently I'm using for rescue
Planed to change first the rescue email with a new one.
But:
I Forgot the security questions
Followed the reset security questions instructions.
Got the email on the rescue address but The link I've got on my rescue email to reset my security questions is invalid. By now the 3 hour window for the validity of the link is gone.
If I go via Apple ID, I login successfully but when I select Security I'm thrown back into Manage your Apple ID screen that displays now as well this message "An unknown error has occurred"
Tried several times, the same again and again.
On top of the long hours on the forums I spent 20 minutes over the phone with the US support on international charge, eventually I hanged up while waiting too long for the 3 rd expert but got an email later on indicating to clear my browser history and try again, which didn't work. Case number 519598448. Used my laptop with IE and my iPad, same result.

This problem now appears for me too.
When using iforgot.apple.com email-verification clicking the reset link results in the "Invalid Link" error.
The error, that caused me to do this (password failing to verify against iCloud) has vanished since though.

Invalid TLV record error

Post Author: CHTClay
CA Forum: Deployment
We have an app that was originally written in VB6 (using the ActiveX viewer) with reports designed in Crystal 8.5. A new executable was added to the app written in C# that uses (not embedded) two report files designed in Crystal 11.5. The VB6 code was modified to include references to the 11.0 RDC. The install program (before adding the reports to the C# module) used the following merge modules:
Crystal11_NET_EmbeddedReporting.msm, CrystalReports11_RDC_Designtime.msm, CrystalReports11_RDC_Runtime.msm, CrystaReports85_ActiveXControl.msm, CrystalReports85_Crpaig80.msm, CrystalReports85_Cpre32.msm and CrystalReports85_Imploder.msm.
This installation and the app ran perfectly. After adding the reports to the C# module we recompiled the install (using the same merge modules as above) and reinstalled the app. The VB6 reports ran as expected, but the two new reports failed because some Crystal Desicions components did not get installed.
After researching, I created a new install package with the following merge modules:
CrystalReports11_5_RDC_Designtime.msm, CrystalReports11_5_RDC_Runtime.msm, CrystalReports11_5_RDC_Reportengine.msm, CrystalReports11_5_RDC_License.msm, CrystaReports85_ActiveXControl.msm, CrystalReports85_Crpaig80.msm, CrystalReports85_Cpre32.msm and CrystalReports85_Imploder.msm.
Reinstalled the app. The two reports in the C# module work great, however, all of the reports associated with the VB6 code get an "Invalid TLV record" error.
I have researched this issue here and on the web with no joy!
Is Crystal Decisions and ActiveXviewer mutually incompatible? Are we missing something in the installation build?
Any advice would be greatly appreciated.

This has happened in the past when your code uses a generic prog id to create the object:application.CreateObject("CrystalRuntime.application")change toapplication.CreateObject("CrystalRuntime.application.115);Another thing you might want to try is to put the craxdrt115.dll into a COM+ package and give it administrative rights. KBase Article ID:c2017301This is a very generic error so it is hard to say what the problem is with so few details but I tried my best. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Error :Invalid TLV Record when using with VC++ UI Thread

Post Author: divya prakash
CA Forum: Other
Hello
I am using Crystal Report XI with VC++ 6.0 .When I am trying to print report directly on button click event all goes well.But as soon as i try to print report calling that function in a UI Thread it gives two error :
This document could not be opened. It does not appear to be a Crystal Report document. This document has the expected file extension (.RPT) but it seems to be corrupt. If the report use to work, try opening it with a different version of Crystal Reports and if that still does not work, please contact your administrator.
after pressing OK it gives another error : Invalid TLV record.
I dont know what is going wrong ...same code works well if I dont call in UI Thread and the moment I try to do the same by calling that function in UI Thread it gives above errors.
I have registered :craxdrt.dll as well as crqe.dll .... than also ..
Please help me I am totally stuck ...
Thanks in advance
- Divya Prakash

Post Author: divya prakash
CA Forum: Other
Hello
I am using Crystal Report XI with VC++ 6.0 .When I am trying to print report directly on button click event all goes well.But as soon as i try to print report calling that function in a UI Thread it gives two error :
This document could not be opened. It does not appear to be a Crystal Report document. This document has the expected file extension (.RPT) but it seems to be corrupt. If the report use to work, try opening it with a different version of Crystal Reports and if that still does not work, please contact your administrator.
after pressing OK it gives another error : Invalid TLV record.
I dont know what is going wrong ...same code works well if I dont call in UI Thread and the moment I try to do the same by calling that function in UI Thread it gives above errors.
I have registered :craxdrt.dll as well as crqe.dll .... than also ..
Please help me I am totally stuck ...
Thanks in advance
- Divya Prakash

HT5538 I receive an error message when trying to link my iMessage account to my Apple ID. My phone syncs fine, just my Macbook doesn't work. Same issue with Facetime.

I receive an error message when trying to link my iMessage account to my Apple ID. My phone syncs fine, just my Macbook doesn't work. Same issue with Facetime.

HI,
In effect this is a DNS block.
You can do it.
You need to be in an Admin Mac User Account that has non blank password.
Go to the Applications/Utilities folder and open Terminal.
You should see your shortname (the one under the Little House icon) followed by the $ symbol
Copy and paste the bold text below into Terminal after the $ symbol.
sudo pico /etc/hosts
This will load the file "hosts" into and editor that works in Terminal.
Use the arrow keys to get to the line with Verisign in it.
Now type the # symbol and it will be added in front of the character that is highlighted.
The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
Now use CTRL and O keys together.
This Saves the changes.
Quit Terminal.
10:02 PM Wednesday; May 1, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Error: 'InfoObject ZDATE contains invalid characters in record 1 in value'

Dear friends,
When I am uploading data from oracle datasource (in BW 3.5) I am getting an error 'InfoObject ZDATE contains invalid characters in record 1 in value'. There are no illegal characters in the date instead the date field is blank in datasource. There are other date fields technically the same as ZDATE with blank values but they dont throw an error when scheduler runs.
Though when I manually upload the data, it's loaded successfully.
Please suggest where can the error be?
Regards,
Amit Srivastava

You have 2 options:
1. Corect your data for the characteristics that give errors.
Or
2. go to SPRO in BW - Netweaver - BW - general settings - maintain permitted characters.
In this screen, you maain tain any special characteristic that you the system to recognise and accept. In your case, take your characteristics that give error and add to this.
Ravi Thothadri

"sync-rule-inbound-flow-rules-invalid" error on synchronizing an Inbound Sync Rule from the FIM connector space to the Metaverse

I have created an inbound sync rule in the FIM portal to import groups from an external system (SQL Server) into the metaverse. I can import the rule from the FIM MA into the FIM connector space but when I run a full sync on the FIM MA I get the error
"sync-rule-inbound-flow-rules-invalid". The only way I have found around the error is to remove all the attributes from Inbound Attribute Flow in the sync rule. However, this defeats the purpose of having the sync rule in the first place. Searching
the Web, I have come across posts from other people with "sync-rule-inbound-flow-rules-invalid" problems but the solutions do not seem to work in my situation.
A little background about the sync rule
Metaverse Resource Type: group
External System Resource type: group
Relationship Criteria: accountName (metaverse) = "string field" (ConnectedSystemObject)
Create resource in FIM: yes
Inbound attribute flow:
- Domain
- Member
- DisplayName
- accountName
- MembershipLocked
- MembershipAddWorkFlow
- Type
- Scope
I am new to FIM so it's possible I have overlooked something in the setup of this sync rule. Any suggestions on possible causes of this issue would greatly appreciated.

There is no scope filter. In regards to the attribute flows, no functions are used. Here is further information about the attribute flows
Set up of Inbound attribute flow for the inbound Synchronization Rule.
Metaverse External System (SQL Server View)
- Domain Domain (string)
- Member Member (multi value attribute)
- DisplayName ObjectDescription (string)
- accountName ObjectID (string)
- MembershipLocked 'false' (set up as a string literal)
- MembershipAddWorkFlow 'Owner Approval' (set up as a string literal)
- Type 'Security' (set up as a string literal)
- Scope 'Universal' (set up as a string literal)
Is this the info you were asking for? If not, please clarify what details you are looking for in regards to the sync rule.

Sync Error - CRRecurringl: SetRecurringDates Start date is invalid

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid
I have deleted and re-entered every recurring calendar entry. This has not solved the problem.
I sync on 2 computers. The deskop computer using BB Desk Top 7.0 syncs fine. The laptop using BB Desk Top 7.1 does not sync. 2.5 hours wasted.
any other suggestions.?
BB 9900 7.0 bundle 2406
carrier; Telus
desktop version 7.1.0.37

Please avoid multiple posting of the same query. This is make the forum clean and user friendly to others. For answers to your query check the other post -
http://supportforums.blackberry.com/t5/BlackBerry-Bold/Sync-error-message-CRRecurringl-SetRecurringD...
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid

Sync error message: CRRecurringl: SetRecurringDates Start date is invalid
I have deleted and re-entered every recurring calendar entry. This has not solved the problem.
I sync on 2 computers. The deskop computer using BB Desk Top 7.0 syncs fine. The laptop using BB Desk Top 7.1 does not sync. 2.5 hours wasted.
any other suggestions.?
BB 9900 7.0 bundle 2406
carrier; Telus
desktop version 7.1.0.37

I have just learned that that error message is generated by an appointment in your BlackBerry Calendar with a recurring start date prior to 01/01/1900. So, either delete all BlackBerry Calendar items and resync or find the one entry that has a date before 1900.

Sync error: CRTranRec:​:GetLinked​RecordId : Invalid linked record Id

Similar Messages

Maybe you are looking for

Sync error: CRTranRec::GetLinkedRecordId : Invalid linked record Id