Sync failed to start error

trying to sync my iphone5  on PC via USB cable and keep getting the same error message that the sync failed to start.

1. Try doing them one at a time
Cheers

Similar Messages

  • I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • I get an error message that sync failed to start

    When I try to sync my Ipod Touch it shows that it is waiting to sync but then I get an error message that sync failed to start.  I have tried restore and re starting my computer but I still get the same message, what is going on and how do I fix it? Please help!

    Quit iTunes, restart your computer, restart your iPad and try again. If it doesn't work with a restart of the iPad, try a reset of the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I cannot sync my iphone with my computer.  The error message says the ipone sync fails to start,how do I correct this?

    I cannot sync my iphone with my computer.  The error message says the ipone sync fails to start,how do I correct this?

    try a reset on your iphone
    make sure you have latest version of itunes
    try updating your iphone over wi-fi before connecting to your itunes
    reconnect ,try other usb ports
    good luck

  • HT1386 I am getting an error message that syncing failed to start.  Any ideas why?

    I am getting an error message that syncing failed to start.  Any ideas why.  The ipad is working fine.

    Then I tried to download and install them again but it kept saying the old itunes could not be removed.
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Error message iPhone 5s could not be synced because the sync failed to start

    My iPhone 5s will not sync i get the error message  "iPhone 5s could not be synced because the sync failed to start"
    running IOS 7.1.2
    Macbook Pro running 10.9.4
    iTunes 11.3.1.(2)
    i did not load any new apps this just started. Thanks.

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • HT4972 sync failed to start iOS 5.1.1

    I can't seem to sync my iPad. I get an error message saying that the iPad sync failed to start. No error number.

    With your ipad connected by cable to a usb port on your PC and iTunes open, attempt the sync, while it buffers, close iTunes - wait about 30 seconds then open it again.
    Also check to see if you have any available downloads pending, Apps, purchases etc. from either iTunes or the Apps store.  Make sure they complete first.  If you are on Autosync turn it off - see in iTunes menu under Edit\Preferences\Devices - Prevent ipods, iphones and ipads from syncing automatically - tick the box.  Close and re-open iTunes.
    If still having problems we need to check that you have Apple's Application Management support installed, running and updated to the latest version, as well as the ipod device Service running in automatic startp mode.  Both will cause sync failures if not correctly installed and configured.
    Best regards, Ct

  • Iphone6plus sync failed to start

    New iphone6 plus...love it..connected to Mac computer , keep getting message
    "sync failed to start".  Restored to original , no success .  same message after
    restore.  any ideas?

    Hello ther,e arleenrz.
    It sounds like you're getting an error that is preventing you from being able to sync your iOS device. The following Knowledge Base article offers up some great recommendations for resolving issues such as those:
    If you can't back up or restore your iPhone, iPad, or iPod using iTunes - Apple Support
    Thanks for reaching out to Apple Support Communities.
    All the Best,
    Pedro.

  • Sync failed to start w/ iTunes 10.7, iPod Touch 3rd gen

    Since upgrading to iTunes 10.7 on Windows 7x64, I have had trouble getting my iPod Touch (3rd gen, 5.1.1) to sync. I am getting the message "sync failed to start". This happens with either WiFi or USB connection to the device. I know the iPod WiFi is working because the Remote app shows my iTunes library, fetches email, etc.
    After installing iTunes 10.7, when I connected via USB, Windows tried to search for and install new drivers. After a very long delay, I canceled the search and continued using the existing drivers. I'm not sure if this is related.

    I have resolved the problem by 'shutting down' my MacBook ('restarting' the computer was not sufficient to resolve it). While I was at it, I took the battery out briefly before rebooting – don't know if this made the difference, but I do know that Apple Tech Support have instructed me to remove the battery momentarily on previous occasions when resolving other issues with the computer. Anyway, either just shutting down (or shutting down + removing the battery) seems to have resolved the problem, as iTunes is once again recognising my iPod Touch and I'm able to sync again. Phew!

  • Windows failed to start error

    Windows failed to start error
    I am running a Compaq mini 110c netbook and the following error message occurred on start up. The netbook does not have a slot for a disc as everything was in the netbook already. I am a complete technophobe and need help to restart my netbook.
    windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
    1. Insert your Windows instalation disc and restart your computer.
    2. Choose your language settings, and then click "Next."
    3. Click "Repair your computer."
    Status: 0xc000014c
    File: \Boot \ BCD
    Status: 0xc000014c
    Info: An error occurred while attempting to read the boot configuration data.
    Help please!!! Answers must be in plain everyday language that I can understand!!!

    The following 2 links should help with the issues you are having.  I would suggest attempting a system restore first (not I repeat not a system recovery) make sure you are doing the restore option or you will lose everything.
    Click the option to "Using System Restore when Windows 7 cannot start normally"
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&lc=en&cc=us&dlc=en
    The below link is for other basic troubleshooting that might help if the above doesn't work:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Hopefully the steps are basic enough for you to understand and help out.  Thanks
    I am an HP employee.
    Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • How to correct "service 'apple mobile device' failed to start" error?

    How to correct " service 'Apple Mobile Device' failed to start" error?

    How to restart the Apple Mobile Device Service (AMDS) on Windows
    Solving MSVCR80 issue and Windows iTunes install issues.

  • IOS 5.1 sync fail to start

    Just updated to iTunes 10.6 and iOS 5.1 on iPhone 4S.
    Despite repeated attempts, including turning "sync over wi-fi" off, sync fails to start.

    Suggestion:
    Assuming your OS software and version of iTunes are both up to date, with iPhone connected and iTunes running, Power Off iPhone (hold power button on top until red slider appears, then slide slider to power off), then power iPhone back on (hold power button on top until apple appears on iPhone screen).
    In iTunes,with phone still connected, select iPhone in Devices and Summary screen, if phone does not sync after a minute or so, click Sync button in iTunes. If phone does not sync then, on iPhone choose Settings/General/iTunes Wi-Fi Sync and click Sync Now.
    If that doesn't work, try changing a phone option in iTunes (such as un-check "Sync this phone over Wi-Fi"), and with phone still connected, quit then re-launch iTunes, and if Sync does not start automatically, click iTunes Sync button.
    If iPhone still does not sync, I suggest calling 1-800-MY-IPHONE.
    My iPhone still does not sync automatically daily over wi-fi even though that option is set, but it will sync  when connected to computer. So I am guessing there is still a bug somewhere.

  • When syncing ipad to my itunes i get the message 'sync could not be finished because the sync failed to start' help!!

    when syncing ipad to my pc's itunes i get the message 'sync cud not be finished as sync failed to start' help

    So I reset my Apple ID password. Which then stopped my MobileMe account from working. Hang on - these were 2 different accounts a while ago, with different passwords!!!
    So I have logged back in to MobileMe with my AppleID, and that's working again. After a short wait I can now create Home Sharing again.
    Folks, I think we have just had our Apple IDs merged with our MobileMe accounts!! With no consultation or warning.
    My guess is that this is the most seamless way for Apple to do it, as the vast majority of people use only one email address and one password for everything. Only those of us who had the same email adress but different a different passwords for MobileMe and Apple ID will have noticed. Annoying for us few, but a clever strategy on Apple's part, becasue we have been driven to fix the issue ourselves by chaning the password, and in doing so we have realised that our mobileme account is now the same thing as our Apple ID.

  • HT1386 sync failing to start

    i have restored my iphone and now trying to synconise it keeps coming up sync failing to start.
    does anyone have a solution?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
     Cheers, Tom

  • New iPad Mini sync Failed to Start in iTunes

    I got a iPad Mini for Christmas and I set it all up that day. I connected it to my Macbook Pro days later and it is telling me the sync failed to start. Both devices are updated to the most recent software. My iPhone can connect to iTunes just fine. Why won't my iPad? I tried unplugging it and replugging it back in and turning it off and on. I tried restarting. I have looked on many questions and nothing seems to help. Thank you!

    I restarted my ipad and it fixed it.. I am not sure what I did.

Maybe you are looking for

  • Garage Band LOOPS question

    Hi, I guess this question can apply to both Logic and GarageBand. When using loops am I locked into the "key" that they appear in? What I mean is this. Let's say I make a song in Amajor in 4/4 time. At that point all my loops appear in the key of A.

  • MR11 Clearing Problem

    When i am clearing MR11 i am am getting the following problem You cannot post to this asset (Asset 000082000008 0000 deactivated) Message no. AA303 Diagnosis A complete retirement or a complete transfer was already posted to the asset. System Respons

  • Would apple take my ipod touch 4 as part of payment of an ipod 5?

    would apple take my ipod touch 4 as part of payment of an ipod 5?

  • Compressing an Attachment for E-mail (??)

    New Duo2Core; OS 10.4.8. I use Entourage (Office 2004). On my G4's and 5's there is an option to compress an attchment. That is greyed out on the Entourage on my Intel Mac. I notice that Stuffit is not included with the OS on the Intel system. Is it

  • Java.util.Map as Parameter?

    hi! i use a Map as Parameter in a webserivce. in detail it's a hashMap<String,String> is this a recommend way? can any other client such as .net understand the wsdl? in the wsdl the map looks like : type="apachesoap:Map" thanks a lot?