Sync fails on a particular device everytime

My encryption "hand-shake" is failing. Therefore this device cannot sync.
1305304056789 Engine.Forms WARN Error decrypting record: Record SHA256 HMAC mismatch: should be 2355efb62a694cf659669feae580a03685b5228871f9145b291032ee638b5b3c, is c84321e18cd4b6b1c3191c5b45f84296b8d29a61f0fa19d1b6b45262f832255a No traceback available

ScarletJamie wrote:
blacksaibot wrote:
oook wrote:
In your case could you please let me know whether your X-Box is connected wired or wireless to the router? Try to set the upstream bandwidth with the desired value and select 'MAC address' under the heading 'category', put the MAC address (depending upon how the x-box is connected to the router) in the space provided keeping priority as high.
its wired.
upstream bandwidth affects ALL devices, as I previously stated. its useless to me.
I agree with Jake_2.0, the router don't have that capability.
Yes that was already stated.  Please do not duplicate answers.

Similar Messages

  • When I try to sync my ipod touch, itunes v11, displays waiting for sync to start, then a meesage appears saying sync failes as device timed out.

    when i try to sync my ipod, itunes v11 says "waiting for sync to start" then a message appears "sync failed, device timed out.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Sync fails on all devices

    My sync fails with all devices.
    iPhone 5
    iPod 5
    iPad 2
    all previously backed up. Ever since the first backup they have failed. several updates in iOS and iTunes. I am upgrading my HDD on my PC running Win 7. Every piece of software is a fresh install. And still fail. Tried changing USB ports. No change. Is there any log file that is on the devices that could block this, if it is corrupt? I've already done a hard reset on one of the phones and no change. This is rrrrreeeeeaaaalllyyy irritating. I love the phones and iPad. I'm really ticked at iTunes. Always had problems with it. It has always bogged my computer down and never shows you what its doing.
    Please help!!!!!!!!!

    check out funambol or scheduleworld
    or stick with the gmailsync... it will eventually work... it just got released not to long ago... they will work out the bugs... once they do, it will be the next best thing to a BES
    Message Edited by drizzt09 on 05-08-2009 11:39 PM

  • BlackBerry Media Sync Failed to connect to your BlackBerry device

    I am trying to successfully sync my blackberry bold 9000 with itunes via the BB media sync program. I have successfully installed desktop manager and can sync contacts, email, add applications and can sync via Roxio media manager (painfully though). However when I open BB Media Sync I get an error Msg saying 'Blackberry Media Sync Failed to connect to your blackberry device - Retry or Cancel' It displays the device PIN in the window but still says please conect a blackberry device. I have mass storage mode turned on, media card support, USB drivers installed and have checked the media card is inserted correctly. When I try to find my blackberry in 'My Computer' it does not appear to be there either. What am I doing wrong?? Please help

    Hi....
    read this post and see if that works for you...
    http://supportforums.blackberry.com/rim/board/message?board.id=Bold&message.id=1614&query.id=19721#M...
    Cheers
    M
    Need additional information on BlackBerry products?
    visit: http://www.blackberry.net

  • Blackberry Media Sync fails to connect to my Blackberry

    Everytime I try to use the Media Sync it fails to connect. Ive tried plenty of times and I still cant get it to work. Ive checked my usb connection and its all fine. i can do anything else but that.
    I have the blackberry 8320
    How do i get it to connect?

    Thanks for your response.
    I have desktop mgr 4.7 and BB plugged in and online. When i then click on the blackberry media sync function to upload my music from iTunes. It knows that my BB is still connected as it states my PIN No. in the top right hand corner, however as it is looking for my playlists, an error pops up and states "Blackberry Media Sync failed to connect to your Blackberry device. Click Retry to try again or Cancel to disconnect". If i click retry the same error comes up.
    I am wondering if you can only assign one BB PIN to the Media Sync as it is linked to iTunes, similar to what Apple's restrictions are with having multiple iPods syncronising on the software.
    Hope this makes sense, i was thinking i should send a snap shot of the screen into BlackBerry though can't find an email address to shoot it too.
    Thoughts?
    The Dog

  • Sync failed to start w/ iTunes 10.7, iPod Touch 3rd gen

    Since upgrading to iTunes 10.7 on Windows 7x64, I have had trouble getting my iPod Touch (3rd gen, 5.1.1) to sync. I am getting the message "sync failed to start". This happens with either WiFi or USB connection to the device. I know the iPod WiFi is working because the Remote app shows my iTunes library, fetches email, etc.
    After installing iTunes 10.7, when I connected via USB, Windows tried to search for and install new drivers. After a very long delay, I canceled the search and continued using the existing drivers. I'm not sure if this is related.

    I have resolved the problem by 'shutting down' my MacBook ('restarting' the computer was not sufficient to resolve it). While I was at it, I took the battery out briefly before rebooting – don't know if this made the difference, but I do know that Apple Tech Support have instructed me to remove the battery momentarily on previous occasions when resolving other issues with the computer. Anyway, either just shutting down (or shutting down + removing the battery) seems to have resolved the problem, as iTunes is once again recognising my iPod Touch and I'm able to sync again. Phew!

  • WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

    I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
    This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
    server is configured on http port 80 
    ERROR
    Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
    according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
    I've checked proxy server connectivity. I'm able browse following site from WSUS server
    http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
    I did telnet proxy server on the particular port (8080) and that is also fine.
    I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
    Any tips appreciated !
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
    Your reply  ("SSL is enabled/configured, and the certificate being used is invalid
    (or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
    I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
    My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
    proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
    Any other hints where I can prove them it's a sure shot problem from their side.
    Thanks again !!
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • I just received a new mac and I am trying to sync my ipod to it but everytime I try it stays stuck on the "backing up" section of the sync. I have already unauthorized my other computer like the instructions said to but that did nothing.

    I just received a new mac and I am trying to sync my ipod to it but everytime I try it stays stuck on the "backing up" section of the sync. I have already unauthorized my other computers like the instructions said to but that did nothing. Please tell me what I should do or how to back up my device.

    You are in iTunes for Windows.

  • How to tell Facetime to contact a particular device?

    I have Facetime on my iMac (27 inch with built-in camera, running OS 10.7.3).
    If I try to use Facetime with my wife on her iPhone (where her number has a blue star by it), it connects and works fine.  However, if I try to use Facetime to talk with with her through her new MacBook Pro (using her email address as the contact), Facetime reverts back to the phone number and calls her iPhone. 
    How can I force Facetime to contact her Macbook instead of her iPhone?

    Tgara wrote:
    I have Facetime on my iMac (27 inch with built-in camera, running OS 10.7.3).
    If I try to use Facetime with my wife on her iPhone (where her number has a blue star by it), it connects and works fine.  However, if I try to use Facetime to talk with with her through her new MacBook Pro (using her email address as the contact), Facetime reverts back to the phone number and calls her iPhone. 
    How can I force Facetime to contact her Macbook instead of her iPhone?
    OK, I think I figured this out by myself.  The short answer is that you cannot specify a particular device, unless you set up Facetime (or iMessage) only for that device.  If you have multiple devices with the same Apple ID, they all respond to an incoming iMessage or Facetime call.
    In my case, I've set up my iPhone, iPad, and Macs to use Facetime and iMessage with the same Apple ID.  When someone wants to do a Facetime call with me, or send me an iMessage, all the devices respond simultaneously.  It's kinda funny to hear the Phone, iPad, and iMac going off, telling me I have an iMessage, or asking me to accept a Facetime call.  From there, I simply choose whatever device I want to use. 
    I would add that with iMessage, the way I have my gear set up, all the messages are synced, meaning I can be doing an iMessage chat on my iPad, stop for a while, and pick it up again on my iPhone -- the same message string will be in the Message app (synced by iCloud I assume).  Anyway, it's kinda neat.

  • IOS 5.1 sync fail to start

    Just updated to iTunes 10.6 and iOS 5.1 on iPhone 4S.
    Despite repeated attempts, including turning "sync over wi-fi" off, sync fails to start.

    Suggestion:
    Assuming your OS software and version of iTunes are both up to date, with iPhone connected and iTunes running, Power Off iPhone (hold power button on top until red slider appears, then slide slider to power off), then power iPhone back on (hold power button on top until apple appears on iPhone screen).
    In iTunes,with phone still connected, select iPhone in Devices and Summary screen, if phone does not sync after a minute or so, click Sync button in iTunes. If phone does not sync then, on iPhone choose Settings/General/iTunes Wi-Fi Sync and click Sync Now.
    If that doesn't work, try changing a phone option in iTunes (such as un-check "Sync this phone over Wi-Fi"), and with phone still connected, quit then re-launch iTunes, and if Sync does not start automatically, click iTunes Sync button.
    If iPhone still does not sync, I suggest calling 1-800-MY-IPHONE.
    My iPhone still does not sync automatically daily over wi-fi even though that option is set, but it will sync  when connected to computer. So I am guessing there is still a bug somewhere.

  • IPod shuffle will not sync with iTunes 7.3; "iPod sync failed"

    My shuffle is acting weird lately. For example, when I plug in the iPod and try to add songs and/or sync the device, iTunes says, "iPod sync failed. Disconnect and reconnect, then try again." It's really annoying because I can't add any songs to it or change any settings. Please help me! I have tried almost everything to save my shuffle and have restored it about 6 times!
    eMac G4   Mac OS X (10.4.9)  
    Message was edited by: Robert Boyer

    Have you tried a Disk Repair in the Disk Utility?
    Also, you could have a damaged iPodDriver.kext file.
    You can replace it by doing an archive and install or
    use a 3rd party extractor and get it from your
    Install disk. Or copy it from a friends Mac.
    I have tried the Disk Repair in Disk Utility and it says my iPod shuffle is perfectly normal. I then decided to erase it with Disk Utility using Mac OS Extended (Journaled) but it didn't work, either. I am beginning to think this is a software problem with my computer...
    I will try to replace the iPodDriver.kext file, but unfortunately, I lost the Tiger install disc. Can I use the install disc that came with my eMac (Mac OS X 10.2 Jaguar, I think)? Please let me know soon, and thanks for helping!
    P.S. If I can't install it from my eMac install disc, I think I will copy the iPodDriver.kext file from a computer at my library or somewhere else. I can also borrow a friend's Tiger disc and use Pacifist, a great program for extracting .pkg files, to get a fresh iPodDriver.kext file.
    Message was edited by: Robert Boyer

  • LMS3.2 - Need Customized method for cofig archive to particular device.

    Hi all,
        We are using Cisco works LMS 3.2 - Added around 400 devices and monitoring the same.  Facing a issue like while taking a configuration backup getting all devcie details and also CONFIG_ARCHIEVE Job is time consuming, because getting all device configurations. To avoid this we need to know the customized method to archive target particular device configuration in the LMS 3.2 .
    Can any one help on this...Thanks in advance.
    Thanks and Regards
    Ramprakash

    This is possible. You can schedule a Archive job for perticular devices to run periodically, like every 6 hours, daily, weekly or monthly.
    This can be done from :
    RME > Config Mgmt > Archive Mgmt > Sync Archive
    -Thanks
    Vinod

  • HT1386 sync failing to start

    i have restored my iphone and now trying to synconise it keeps coming up sync failing to start.
    does anyone have a solution?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
     Cheers, Tom

  • New iPad Mini sync Failed to Start in iTunes

    I got a iPad Mini for Christmas and I set it all up that day. I connected it to my Macbook Pro days later and it is telling me the sync failed to start. Both devices are updated to the most recent software. My iPhone can connect to iTunes just fine. Why won't my iPad? I tried unplugging it and replugging it back in and turning it off and on. I tried restarting. I have looked on many questions and nothing seems to help. Thank you!

    I restarted my ipad and it fixed it.. I am not sure what I did.

  • Error message iPhone 5s could not be synced because the sync failed to start

    My iPhone 5s will not sync i get the error message  "iPhone 5s could not be synced because the sync failed to start"
    running IOS 7.1.2
    Macbook Pro running 10.9.4
    iTunes 11.3.1.(2)
    i did not load any new apps this just started. Thanks.

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Maybe you are looking for

  • Types Of Datasources in BI 7.0

    Hi Gurus,    Pls let me know the types of Datasources  available in BI7.0. Regards Vishal

  • In "save as"-dialogues, : (colon) turns into - (hyphen)?

    ahoi. in all "save as"-dialogues in os x 10.8, i cant use a : (colon) as character in the filename; instead it turns into a - (hyphen). is this wanted by apple? or am i the only one with this "problem"? i changed nothing in the settings...

  • Snow like display on screen

    Hi everyone, I've been experiencing an issue on and off for sometime now which I think is odd. I have an external lcd monitor connected to my MBP (2009) via an apple mini displayport and an HDMI cable. Occasionally, after the MBP turns the external m

  • Photoshop CS6 Running Slooooow

    I am so deeply frustrated with PS CS6 right now.  I bought the Master Suite through school.  I also bought a 27-inch, late 2012 iMac with 3.2 GHz i5 and 32GB of Ram.  Everything on my computer runs lightning fast except for CS6.  Even older PS runs f

  • Please explain how to use binary search in this loop.

    Hi, I want to use the binary search in below Read please give me solution.... LOOP AT it_vbfa_temp ASSIGNING <fs_vbfa_temp>.       CLEAR is_ekbz1.       READ TABLE it_ekbz1 INTO is_ekbz1 WITH KEY xblnr = <fs_vbfa_temp>-deliv flag = space.       IF  s