Sync folder hangs and "into subfolder"check box ignored.

I have two recurring, intermittent issues with Lightroom 5.3. They MAY be related. This has been going on since I purchased Lightroom 5 via Creative Cloud. I have posted the first issue before but I still have not received a solution.
First problem: When I try to sync a Dropbox folder that has updated images on it, Lightroom shows that it is importing the new images, the progress bar continues to the end, but no new images show up and the progess bar remains at the very end. I can manually stop the progress, but then I am unable to try syncing again (it doesn't show up as an option), unless I restart Lightroom. Sometimes it works after several attempts, and sometimes I have to try using "Import..." to get it to work. This also occurs, though less frequently, when I try importing. The Dropbox folder is not being updated when this happens. I have tried pausing syncronization in Dropbox just to be sure. I don't know if this happens with any other folders. My Dropbox folder is the only folder I sync regularly for work. I don't think I'm the only one who has had this problem, but I've seen no solution posted.
Second problem: When importing images from a folder or compact flash card, Lightroom 5 ignores my subfolder name that I've typed in, even though "Into Subfolder' is checked. I often have to click the checked box on and off a few times to get it to work. Sometimes it doesn't work unless I click a different source folder, then back to the actual folder I want to import, then clicking the "into subfolder" box a few more times. This is also an intermittent problem and I have found no way to reproduce either one on command. I don't know if these two issues are related but I find both issues quite frustrating and both slow me down almost every day.
Please advise.

On your iPod, check Settings > General > Restrictions and be sure you haven't somehow enabled restrictions for the App Store. If restrictions are enabled, you cannot install apps and your itunes Apps pane will not allow you to manipulate apps.

Similar Messages

Return Item and Free goods check box in purchase order

Hi Guru:
I just got the question regarding the return item and free goods check box,my question is that if I check the free good check box,then the price of the matieral will be charged to zero,however,if I want to issue the return purchase order to the vendor,does I need to check the return box first and then issue the return order to the vendor? Then go to MIGO transaction to select the movement type 122 to return the goods,what's the whole precedure for returning the goods to the vendor,can anybody tell me,very appriated!

Hi,
Retun to vendor through have two types....
One is you have Po created, vendor send the item in that few items have rejected so you need to return the item to vendor......
here in MIGo chose returrn to vendor selce the PO numbere.... system automaticaly take the movent type 122....
sencond type is Retun PO..... In Po while creting the PO tick the return indication..
If you do the GR system will pick 161mopvent type.. ( GR returns)...
REgards
anand

Cell wise and row wise check box in oops alv

Normally column wise check box are possible in oops alv but how to possible check box in first row only in oops alv and Cell wise check box in oops alv?

Hi,
Try like changing this
insted of
g_layout-f2code = ' '.
use this
g_layout-f2code = 'DISP'. " Sets fcode for when double
and
g_layout-f2code = '&ETA'. " it will display POPUP screen
Best Regards
Ranga
Edited by: Ranga Swamy on Nov 1, 2008 11:07 PM
Edited by: Ranga Swamy on Nov 1, 2008 11:17 PM

How to increase the size (Length and width) of check box

Hi All,
I have to increase the size of ( width and length) of check box, I have revised to check box topic in dev guide but didnt find any clue, i have also tried to use CCStyle class but that is also not working, I would appreciate if some can help me out on this. Thanks in advance , let me know if any clarification required.
Thanks
Pratap

Hi Pratap ,
I honestly don't know how to increase the size
But i am giving you an alternate solution : we can create two Images with check box type 1 ) with checked
2 ) with unchecked . ( you can create image of any size ) and get them displayed on OAF screen dynamically using switcher case .
Dynamically displaying image will give the illusion of check box being checked and unchecked .
keep this image moved to following media directory
eg : /oraapp/mfgtestcomn/java/oracle/apps/media .
Implement the switcher case , add the fire action to this Image Column , create a transient attribute and attach to this
column . Depending on the value returned by transient attribute display the image on the column .
Let me know if its not clear .
Keerthi

How can I Maximize a Windows and include a check box into my jtable

Hi there,
I have made a program to show a JTABLE it is working well, I'm talking about show information(DATA), my question is related with MAXIMIZE my jframe or window, how can I do that???
other question is related with include or add a new column to my jtable, the goal here is achive include a check box column to select a recorde from my jtable..
Some advise...
here is part of my code
public static void main(String args[]) throws SQLException {
JFrame myFrame = new JFrame("Scan cut ");
Container content = myFrame.getContentPane();
content.setBackground(Color.white);
content.setLayout(new FlowLayout());
SendNotifyB = new JButton("Send Notify");
content.add(SendNotifyB);
//content.add(new JButton("Send Notify"));
//content.add(new JButton("Add O-S-T"));
SendNotifyB .addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
JOptionPane.showInputDialog("Type Odds");
JOptionPane.showInputDialog("Type Seconds");
myFrame.getContentPane().add(new AS3());
myFrame.setVisible(true);
myFrame.pack();

public class MyTableRenderer extends javax.swing.JCheckBox
implements javax.swing.table.TableCellRendererand
myTable.getColumnModel().getColumn(some value).setCellRenderer(new MyTableRenderer());I'll leave the maximizing and other code up to you as an exercise.
Message was edited by:
filestream

Page title and page name check box

Hi there,
if I need to change the page title starting from the page name, by default equals, it would be more efficient and helpful, from UI/UX point of view, to keep the page name in the text area of page title, when un-checking the check box below, rather than deleting it.
The idea is that you will most probably change few parts of the text already herited form the page name.
Regards
Giulio

Giulio-
Your suggestion makes sense, we will look into changing the behavior. The "Filename" edit box just below has the same issue.
Thanks,
Paul

Device preferences dialog box is too narrow and cuts off check boxes - can't change synch prefs?

In itunes - preferences - devices dialogue box is too narrow - can't see check boxes - hence can't change synch settings. Have checked resolution and text size - both set at smallest.

Are you on Windows or Mac?
Look here to see where your Lightroom preferences are located on your system, and make absolutely certain that the user running LR has permission to read and write to that folder.
Hal

Why is my Hardware Accelerate Composition, Layer, and Footage Panels check box disabled

Hello anyone!
I have all the requirements to meet Adobe's standards for GPU requirements, but this check box (Hardware Accelerate Composition, Layer, and Footage Panels)[Edit>Preferences>Display] is disabled for me, why? Do I need to worry about this setting? Does it really matter? Any information on this topic would be helpful. Thanks in adavance for your feedback.
GPU Information:
Fast Draft:
Available
Texture Memory:
924.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 470/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
4.2
Devices:
1 (GeForce GTX 470)
Current Usable Memory:
608.00 MB (at application launch)
Maximum Usable Memory:
1.25 GB
Computer:
Windows 7 64bit SP1
24GB MEM
i7 intel
Feature support levels
There are three tiers or levels, from lowest to highest requirements, of support:
Level 1: For OpenGL SwapBuffer:
This level simply requires a GPU that can do OpenGL 1.5, or greater, with Shader Model 3.0, or greater. Most ATI and NVIDIA cards, and the Intel HD Graphics 3000 chipset (available in the MacBook Air, Mac Mini, various Windows machines, etc.) and 4000 (Windows only at this time) are supported. If your GPU does not support these requirements, software OS blitting like CS5.5 occurs, and there are improvements for software blitting in After Effects CS6, as well.
Level 2: For Fast Draft previews, Hardware BlitPipe, and Cartoon GPU acceleration:
Includes Level 1 features. This level requires OpenGL 2.0, or greater (with Shader Model 4.0, or greater, on Windows), and 256 MB, or greater, of texture memory. Most ATI and NVIDIA cards released in the past five years, plus the Intel HD Graphics 3000/4000, support this level.
If your GPU does not support these requirements, these features will be disabled:
Fast Draft mode
The "Hardware Accelerate Composition, Layer, and Footage Panels" preference.
The Cartoon effect's "Use OpenGL When Available" option (the Cartoon effect then runs on the CPU).
Level 3: For Ray-traced 3D rendering on the GPU:
Includes Level 1 & 2 features (for machines with attached monitors). This level requires a supported NVIDIA GPU and 512 MB, or greater, of texture memory. For a current list of supported GPUs, see the Adobe website.

Well, you should be concerned that it isn't available - there is still some configuration issue with your graphics card - but you can live without it most of the time.
Mylenium

How to Strikethrough and Grey Out Check Box

Hello,
This is my first day using LiveCycle. I am trying to make a check box form (upon checking) strikethrough the entire field and grey out. I have the following FormCalc which I know is incomplete. Please help!! Currently the value is just causing my checkmark to turn the color value I've indicated.
(I have these settings Show: Click, Language: FormCalc, Run At: Client)
form1.#subform[0].Subform1.#field[1]
using action:
if ($ == "1") then // checked
form1.#subform[0].Subform1.#field[1].font.lineThrough= "1";
form1.#subform[0].Subform1.#field[1].font.fill.color.value= "91,173,160";
elseform1.#subform[0].Subform1.#field[1].font.lineThrough= "0";
form1.#subform[0].Subform1.#field[1].font.fill.color.value= "0,0,0";
endif

Hi Varma,
That didn't work. Thanks for your help though. I got an error message that says:
Error:accessor
'form1.#subform[0].Subform1.#field[1].ui.textEdit.border.fill.color.value' is unknown

PO/ S.Location and GR msg check box in 'delivery/invoice' tab of header dat

Hi all,
Under which case the below 2 fields are required to b filled while creating a PO apart from making them mandatory fieds in document type settings.
1. GR msg check box in 'delivery/invoice' tab of header data
2. Storage Location data in item details
in me59n, system unable process p.req to PO becoz it is mandatory to fill these two fields.

Hi,
1. GR message check box issues message to the buyer after every the goods receipt against the PO.
Message type has to be configured for this functionality.
2. If you are managing stock of material at storage location level , then you will need to maintain this at PO item level.
Regards,
Maheshwari

Fierfox will not spell checkinoutlook email and the spell check box has been ticked

spell check box is ticked but is not working on firefox with outlook email

Please also make sure it is enabled: [http://helpspot.business.uconn.edu/index.php?pg=kb.page&id=187]

Sync folder to and from Virtual Machine

i have a folder i would like to sync between my windows 7 virtual machine desktop and my mac desktop. i am imagining that what i add to one and/or delete from one would be added to or deleted from the other. same for organizing the files and folders.
is this feasible?
is this something for ChronoSync?
thanks for any advice or expertise.
- Jon

Ask on your virtual machine software makers website how to go about doing this.
I don't let Windows touch my precious, I use a external USB instead, but I know sharing is possible because VMFusion asked me once and I denied it.

Forms - Radio Buttons as check boxes which turn into circles - Need them to stay as check boxes.

Hi
I am working on some forms for Teachers Reports it is a generic document for student reports. I have set the document in Indesign 6 and edited the pdf form in Acrobat Pro.
The form consists of Radio Buttons (Check Boxes) as they have to score the child between 1-4 and the teacher is only allowed to select 1 box from out of the 4 boxes (hence radio buttons) .
The problem we are having is that there might be 2-3 teachers that have to write and score each child's in a certain section of the report and they might use a PC or MAC to do this.
For some reason, some of the reports have changed the Radio Button "Check Boxes" to a "Circle" both in the PDF and when printing and they need it to be a Check box. (In indesign this was set to Check Box and to print as a Check box)
Some how after the teachers have used different computers the check boxes have changed to circles and we need to change them back to check boxes but is there a way to change them without having to go "Forms" > "Edit" > "Select all circles" > "Properties" > "Options" > "Button Styles" > "Change to Check".
But it is not changing to all of the reports on some.
Is there an easier option can select properties and search the "circles" and change to "check boxes" for the whole document?
I really don't want to have to go into each report and have to change each individually or export and import the data in the forms and the teachers dont want to have to rewrite each report.
Someone please help!

Are all of the teachers using Adobe Reader (or Acrobat), as opposed to something like Preview on tha Mac or Microsoft Reader on Windows? Preview is known to corrupts PDF form in a number of ways, including converting radio buttons to check boxes. Microsoft Reader causes other types of corruption. Also, if you create the fields in InDesign, it uses non-standard appearances for the various states and even Reader/Acrobat doesn't always set them in the way you might expect, so it's best to create them in Acrobat.
Your description is a bit confusing since you're calling them radio buttons and check boxes at the same time. Can you clarify what the original field type is?
It is possible to set the various field appearance properties with a script, which could loop through all of the fields and make the needed changes, but without more information about what's causing the changes and exactly what the changes are, it's hard to suggest anything specific.

Saved text fields and check-boxes empty when 3D window activates

I've created Text Fields and Check-boxes in a pdf template, using LiveCycle Designer.
I create the 3D work in Reviewer, and use the pdf template during Export to 3D pdf.
Using 'Extend Features in Adobe Reader' the user can fill in the text fields, and click the check-boxes then save them with the pdf - just using Reader.
So far this is great!
The problem comes when the pdf is opened again and the 3D window (A3DR_3DFrame) activated.
All the completed fields empty!
This is not great at all!
I've did some tests and found that the filelds only clear if I include the Configs selection list box with the special name 'A3DR_Configs' in the template pdf. (A3DR_Configs lists the Configs stored in the 3D Reviewer file and the user can select the config from that list).
This is unfortunate, as the A3DR_Configs window is useful since it indicates to the user which 3D config is currently being viewed (ie the name of the current config stays highlighted).
Is this a bug that can be fixed or is there a workaround?
thanks,
Ian

Would you mind to post your commenton the the approriated Adobe forum page ?
This one is dedicated to Acrobat 3D
The correct forum page for Designer is:
http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es
Thanks in advance
William

Need code for Dynamic check box creation in struts

dynamic checkbox should be created with details of data stored in database(with check mark for already selected check box).
once user make any change to that page and click submit the result ahould be saved in database..
can anybody explain me how to proceed this.
If any sample source code you have plz do sent me..

consider these are the details in database
1. apple checked
2. orange
3. mango
4. grapes checked
consider a jsp page which should display list of fruits in the datsbase,
the jsp page should retrieve these data and diaplay with check box.
These should be generated dynamically.
Assume the jsp page has option for user to enter some other fruit name which should be updated into database of fruits and that should be displayed with the jsp page during next visit.(i.e) number of fruits in the database is not constant.

Sync folder hangs and "into subfolder"check box ignored.

Similar Messages

Maybe you are looking for