Sync is not updating my notes

When I sync my iphone with my computer, the notes section does not update the most recent notes, go back to notes in april 2012!
I try both options, check mark at option seccion to sync notes!

does anybody else have any suggestions ? i don't know what safe mode is and if that is taking all my security down sorry not running my internet w/out security. my question has been here forever nobody knows ?

Similar Messages

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

Regarding Template updates, what does this error " not updated, item not found" mean?

This is the second time I've posted this question so hopefully somebody will respond. At some point in the last few weeks I found that I could no longer apply a template in a group operation (returns the error shown above). If I modify the template and save it it shows all the related files to be updated but does not actually update them and again returns the error "not updated, item not found". As a test I created a duplicate of a particular .html file and applied the associated template successfully. When I apply a template change it does properly update the newly created file but not the others. I also did a mechanical file compare (using windiff.exe) between the original and duplicate file and there are NO differences in the two .html files. I have also deleted and recreated my site maps several times.
As an aside, Library items do update successfully.
I am running Dreamweaver CS6 on Windows 7.

I have an extensive home network and I consider myself to be very proficient with personal computers (had one since 1981) so let's start at that level.
I have you beat by 2 years. Bought an Apple II+ in 1979!
When this problem first started, I went to another PC (home built desktop Win 7 64 bit) I have and created a new Dreamweaver site copy using an instance of the site that was on a network share running on a NAS box (Netgear RAID5) that I use for central file storage. Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with. Now I have no idea why sites housed on my PC are having a problem but that seems to be the issue.
Your setup is very similar to mine - NAS (I'm using an Intel NAS) housing all my working files.
Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with.
So it's working in the duplicate site, but not the current site. And in the current site, you have some files that update as desired and some that do not? Why not just make the duplicate site be the main working site?
Anyhow, I cannot think of any wrinkle that would cause DW to update some legitimate child files in a site but not others, except for a corrupted file cache.

HT4623 My iPad will not update, says not connected to Internet, but I am browsing support online.

my iPad will not update, says not connected to Internet, but I am browsing support online on this same iPad?

Can you update via itunes on computer?

Date modified not updating & InDesign not PDF not appearing

Something is definitely off with my Yosemite finder. Two big issues:
Files are not updating the date modified time after saves. If I change the file name in the finder, it immediately updates like it should. Files in Dropbox reflect the old time (as tested by looking at my Macbook Air running Mavericks)
PDFs made from InDesign and saved to a folder do not appear for a very, very long time, if ever. The PDF is there as I can see it in a shared dropbox on my Mavericks laptop as soon as it syncs
I had another issue with Outlook attachments being unable to be saved to a folder, but they could be saved to the desktop. That problem got fixed with a reboot.
What's going on with my finder? Running all the latest software.

Annoying as all get out, isn't it? My old contextual menu item Nudge won't force the Finder to update either. In my case it also has a certain recalcitrance about updating file sizes. Pray to the computer gods for this updating nonsense to get fixed. In the meantime, you can try relaunching the Finder, that is the only reliable way I've found to force a window update. Hold down the option key, then click and hold on the Finder icon in the Dock and select Relaunch. All Finder windows will close, the Desktop will blink. When you re-navigate to your folder it should now have the correct dates.
Francine
Francine
Schwieder

RH Window not updating / topics not displaying after repositioning

Hi,
I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly.
For example, I want to compare a Word document to a help topic, so I resize the RH window and position it next to the Word document. I open several topics and do what I need to do. Now I'm done with the Word document, so I maximize the RH window again. This is when the problems start:
The navigation along the top (including the topic tabs) does not refresh.
If I double-click a topic in the left pane, it is sometimes not displayed on the right side, although the cursor movements indicate that RH thinks the topic is displayed. (This is hard to explain, and crazily enough I can't even get a screenshot of this to show what I mean.)
If I reduce the window size back to its previous, smaller size, things look normal again and I can see the topic I just double-clicked. But if I want to use RH in a maximized window again, I have to close and reopen the RH project.
Yes, these problems can be dealt with. But this has been going on for several days now (after a Windows update, perhaps?) and it's getting annoying.
Is anybody else experiencing these problems? Is there a solution?
Thanks
Eileen

Thank you for those suggestions, Peter!
You were right - I was dragging the two windows to where I wanted them.
I haven't yet tested your suggstions extensively (I don't spend a lot of time with RH side by side by side with other applications). However, I haven't seen the problem since I started using Windows key + arrows to position the windows.
BTW, RH is the only application where I was having this problem.
I will post again (or edit this post) if I come up with any new information. Even if no one else has posted about this problem, I'm betting that others are experiencing it. As I said, it's relatively easy to work around. Just annoying.
Thanks again!
Eileen

Sync failed: WSUS update source not found on site 786. Please refer to WCM.log for configuration error details.

Hi,
I have installed SC 2012 SP1 + SQL Server 2012 CU2e
I followed the following guide:
http://www.windows-noob.com/forums/index.php?/topic/4427-using-sccm-2012-rc-in-a-lab-part-2-add-sup-and-wds/
And when Sync Failed, what could be went wrong?
I have copied the logs+screenshot, and would be thankful if someone can give expert advise.
Here is link : http://sdrv.ms/13kmHBQ
N.A.Malik

Hi,
I haven't tested myself but going to test the following:
WSUS is bit cranky for now but here is what I did to fix it:
1) Uninstall SUP role
2. Uninstall WSUS
4. Delete SUSDB from SQL Server if any
5. Restart Server
6. Install WSUS (Chose to install DB not WID)
7. Configured Updates to be stored locally
8. Run Post Deployment Configuration from Server manager
9. Started WSUS Admin Console and ran Wizard (also chose to connect for the catalog sync) up to the Point where you select the products. Here I canceled the wizard without choosing any products
10. Install SUP role in SCCM and configure the right Settings (WSUS on Server 2012 Defaults to its own admin Website and ports 8530 and 8531) and select the products you required.
11. Check following log file if WSUS does not sync with SCCM.
Path: C:\Program Files\Microsoft Configuration Manager\Logs
File Name:
WCM.log
wsyncmgr.log
12.) Starts synchronization in the sccm console
Source:
http://robiulislam.wordpress.com/2013/04/12/sccm-2012-installation/
N.A.Malik

New Podcast Episodes Not Updating if Not Subscribed

Hey there,
My podcast hasn't updated the latest two weekly podcast episodes if you haven't subscribed. If you have subscribed, the episodes are available for download. XML uploaded yesterday.
Here is my xml feed: https://s3.amazonaws.com/GraceHB_Downloads/Audio/Poderator.xml
Here is the iTunes link: https://itunes.apple.com/us/podcast/grace-lutheran-church-hb/id470693381
Thanks in advance for the help.
Lee

The 'title' tag for your 2 September episode reads
<title>Love Thy Neighbor</title>
The ode at the start isn't upsetting the iTunes application but it's upsetting FireFox when used as a feed reader and is flagged as an error by FeedValidator, so it's extremely likely that it's upsetting the Store and rendering the feed unreadable. You need to remove it.
The code appears to be for a linebreak and is, I read elsewhere, permissible in XML 1.1 but not 1.0 which is what you have specified: in any event, you don't want a linebreak and getting rid of it altogether will probably solve your problem.

Softeware not updating, seems not fully functional

When I was in the US for work I bought a retail version of Photoshop / Premiere Elements 8. Back in The Netherland I downloaded the trial of the Dutch version and used the US serial to register the software. All went fine but I do have a couple of problems which I'm not sure how to fix.
When I select: Help - updates it reports within a second that the update server is not responding. It has never worked. manualy installing 8.0.1 did not fix the problem.
When I select (in Dutch) file - check folders it reports the service is not available...
In short: some parts do not work and I wonder if this is because I'm using an US serial for a Dutch product or if it is a faulty install.
Regards

1. Make sure that the system is connected to internet and the firewall settings or anti-virus settings are not in such a way that it is not allowing Updater to contact to Adobe servers.
2. If above doesnt work, try this:
   1. Open Network and Sharing Center
   2. Click Change adapter settings
   3. Right-click the Microsoft Virtual WiFi Miniport Adapter, and click Disable.
   4. Open PSE and Help > Check for Updates
Let me know what worked or if not worked for you...
Regards,
Ankush

Consumption not updated - MVER not update

Hi experts,
Here's my case :
- inital stock has been uploaded via mvt 561
- a consumption mvt (201) has been done
- a month later another consumption mvt (201) has been done
The thing is the first consumption has not been updated in MVER table whereas the second one was.
I already checked OSS note 804011, but can't find an explanation . Does someone have an idea?
Thanks in advance
P.

I dont think so.
Is this consumption made from the same stock type like unrestricted use stock, or is one made from unrestricted use stock and the other one from special stock like sales order stock?
I suggest you open a message at SAP to get the report ZMVERBRP from OSS note 791728.
This report should rebuilt the consupmtion for your first goods issue if the posting string situation is okay now.

Fix To Ipod Not Updating, Or Not Restoring

Everytime I tried to update my ipod, or restore it, a write error would come up. Then the ipod would display a screen with a folder saying to see ipod support. After trying several things I found out that if you download the new updater with FireFox IT WILL NOT WORK. I re-downloaded with internet explorer and everything went fine. I hope this helps somebody else.

I have downloaded the updater nearly 10 times using FireFox, all have worked. I am modding my iPod heavily with themes and stuff, is the reason for my multiple downloads. FireFox is not disrupting your download, another factor MUST be contributing. Although, the updater does have an issue where it causes the backlight to no longer be accessible when charging your 5G.

Havig overall probvlems flash player not updating or not there, Cloud is asking me to log in at startup. Was reloaded by support a month or so ago some of the same problms

How do I get in touch with an Adobe Support person to fix this issue?

If you're a Creative Cloud customer, the support information is here:
Contact Customer Care

Windows Updates are not getting download after installation of SCCM 2012 SP1

I have installed SCCM 2012 SP1 step by step as per microsoft documents, Now I am getting error while downloading windows updates from microsoft site.
Error by WCM.log : System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to read data from the transport
connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
Error By wsyncmgr: DB Server not detected for SUP XYZ.com from SCF File. skipping.
Sync failed: WSUS update source not found on site KSL. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=KSL-MUM-SCCM01.KSEC.KotakGroup.com SITE=KSL PID=3688 TID=4752 GMTDATE=Tue May 21 10:59:06.745 2013 ISTR0="getSiteUpdateSource" ISTR1="WSUS
update source not found on site KSL. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
I have reinstall my SUP on site server, i have my WSUS & site server is on same server. I have kept my sup setting as per requirment (8530 & 8531)
Kindly suggest is any other settings need to be done on server side.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
From your log snip-it, it looks like the firewall is causing your problem. Temporary turn off the firewall and see if that solves your problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Adobe will not update

adobe will not update .will not uninstall so i can't reinstall

What is your operating system?
What means "will not uninstall"; do you get any error messages?

When I run the Reconciliation ledger KALC in the doc not update cost centre

Hi
I have done assessment and distribution in month ending. This distribution did in 2 company codes cost centers. it was successfully posted & updated in 2nd company code cost center.
Then I ran the Reconciliation ledger in KALC month end. I was also successfully document posted in G/L account.
But Cost centre was not updated or not picking in the document.
Please give me suggestion .
Thanks
Indu

Dear Indu,
KALC will not update specific CO objects. The intention of the reconcilliation ledger is to reconcile CO internal postings with Financial Accounting. The necessity for reconciliation arises from the fact that, depending on controlling area / company code relationship and customizing, any CO posting can either be:
u2022     Cross company code
u2022     Cross business area
u2022     Cross functional area
or a combination of the above mentioned. For these CO internal postings there will be no corresponding FI documents with the result that CO and FI do not reconcile on company code/business area or functional area level. The reconciliation ledger adjusts this by creating the relevant FI documents. I hope this clarifies the issue.
Regards
Karl

Sync is not updating my notes

Similar Messages

Maybe you are looking for