Sync issues after installing Dynex USB 2.0 Card Bus Adapter

I can't seem to get my iPod to sync via itunes. The only way I can seem to get it done is by pulling the cable and then putting it back in. It syncs just fine when connected to my USB 1 port. It's slow, but it's functional.
Has anyone else experienced this?

I know you said you reset the cpu but i just want to clarify.
Have you reset the PMU? It's the little pencil eraser size button on the motherboard, sometimes red or black.
Shut down your computer, unplug the power cord and press the PMU button once and only once.
Then restart and see if that solves it.

Similar Messages

Sync issue after installing OSX Lion

I updated my 2008 IMAC to 10.7.3 to use Icloud. Now it does still not sync eg. the Calendar with my Ipad, Iphone nor MacBook Pro even though I enabled it. these tool interact perfectly through Icould just not with the IMAC. what is wrong?

Check each service is enabled. Try turning syncing off, restarting the mac and turning syncing back on again.

Issues after installing Classic on OS 10.4

Background and System
I have a Power Mac G3 350Mhz Rev 2 Blue and White, 512MB, 40GB, DVD ROM
running 10.4.9 installed from Retail DVD. Firmware up to date. 2x 20 GB partitions formatted as Extended
Prior to this issue OS X has been running well.
Issue:
After installing OS 9.2.1 to second partition OS X will now not boot up from DVD nor it's partition
Solutions tried:
I wanted to install a Classic environment so used a Retail OS 9.2.1 Bootable CD and did a full install to the second partition.
After the install finished and the system restarted, set on the OS X (Partition1) for start up the system hangs right after the Apple "Chime". with no signal to video card
Attempted to then boot from OS 10.4 DVD but this does not get detected when holding "c" down for boot up from CD option. This worked perfectly before.
Have run OS 9.2.1 Disk Aid Verify and both partitions are ok. The system will boot from the 9.2.1 CD and partition but anything to do OS X now will not work. I also tried an Ubuntu 6.06 Live CD but this will not now boot either.
Checked firmware and tried to re run firmware update and this advised my firmware was up to date.
Any other suggestions?
Thanks

The only thing I can think of is that when you installed the 10.4.9 OS you didn't option to install OS 9 drivers.

Having issues after installing Essbase V9.3.1,configuring the SQL interface

I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
.odbc.ini
[ODBC Data Sources]
DOLU003=IBM DB2 ODBC DRIVER
[DOLU003]
Driver=/home/db2inst1/sqllib/lib/libdb2.a
Database=DOLU003
[ODBC]
Trace=0
TraceFile=odbctrace.out
InstallDir=/home/db2inst1/sqllib/odbclib
[Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
Received Command [SQLRetrieve] from user [Olapadm]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
Connection String is generated
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
Connection String is [DSN=DOLU003;UID=...;PWD=...]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
= 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
--------------------------------------------------------------------------------------------------------------------------------------------

I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
Once I opened the 32 bit driver interface directly and set it up the errors went away.

Dreamweaver CS4 having issues after installing PS CS6 Beta

Hi All,
I'm having issues with Dreamweaver CS4 after installing Photoshop CS6 Beta. I'm getting the follwing erros when trying to open any html file (see attached image).
Once I click OK, the file will open, also now; any copy and paste commands will not work. Anyone else experiencing any problems with other apps after installing this beta version?
Any help and feedback is much appreciated, thanks!

Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
Just a thought ...
This may help!
Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
It is worth a try!
All the best.

Netflix Error W8158 After Installing ThinkPad USB 3.0 Dock Software

I just bought a Yoga 13 with the Dock and it works quite well, except for this issue:
After installing the required software that came with the dock, certain Windows 8 Metro (full-screen) app stopped working. The most obvious was the Netflix metro app (downloaded from Store). The app starts normally, even takes you to your instant queue, but as soon as you start a stream, you get the W8158 error code, with the name of the failed driver in the text of the message.
I made several attempts to download the latest updates from Windows Update. However, none of this fixed the problem.
The Dock added an uninstall shortcut to the start screen, and I ran this uninstaller, but this did NOT correct the problem.
I then ran the OneKey restore (kodos! The recovery works beautifully), re-installed Netflix, and now all works perfectly. Unfortunately, I cannot use the Dock to use a second monitor. Not good.
Ultimately, I think this may be a Netflix App issue. Hopefully, someone will document a fix for this.

Have this same issue with a Lenovo X1 Carbon Touch.

Issues after installing Mavericks

I am having a ton of issues after installing macericks on wed evening, on my MBP 15" 2.5 GHz i7 with 8GB of memory,
I have a task com.apple.internetaccouts, and com.apple.MailServiceAgent, taking upwards of 100% CPU at time and the fan will go full speed, and earlier today i had a msg come up that i had run out of usable memory and the sytem had paused programs, I have restarted a few times and still the same things are coming up and the system has become really slow.
would think that with this system not being that old, that i should not be having these types of issues, if there is something that someone could lead me to ths casue i thnk you
Thanks
Doug

Had this issue again today on my wife's iMac. This was after the Mail.app update that was recently released. I now have messed with this issue enough that I believe I have figured it out.
I used to have a plugin for Mail called HTTPMail that was used to access Hotmail prior to them having POP/IMAP. It seems that removing the account from Mail left some residual account details in the ~/Library/Mail/V2/MailData/Accounts.plist file. Mavericks Mail.app chokes on this account detail and starts duplicating it numerous times. That's why the Accounts.plist file grows so large.
If you open the Accounts.plist file in a text editor (TextWrangler would be my suggestion), find any <dict> entry that points to services.msn.com in any way and remove all those <dict>...</dict> entries, it should resolve the issue. Warning though - I had to delete hundreds of entries so it took a while to do. Once I finished it though, my wife's e-mail has been working fine.

Anyone else having battery life issues after installing Lion?

Anyone else having battery life issues after installing Lion?

Blue Sun Wing wrote:
I have 7.1
I think I would like to uninstall Lion as well. I'd rather have my battery life back.
See if this is helpful: http://www.iphone-my.com/mac/downgrading-lion-snow-leopard/

Is it possible to install a USB 2.0 card in an old eMac?

Hi,
This is probably an embarrassingly ignorant question, but I'd be grateful to know whether I can install a USB 2.0 card in my old eMac 1GHz PowerPC G4 (1GB RAM) running 10.5.6, which only has the old USB 1 ports buitl in. Basically, I'd like to be able to sync my iPhone and attach other newer peripheral devices, such as external hard drives with USB 2.0 connections.
Thanks!

This is probably an embarrassingly ignorant question, but I'd be grateful to know whether I can install a USB 2.0 card in my old eMac 1GHz PowerPC G4 (1GB RAM) running 10.5.6, which only has the old USB 1 ports buitl in.
You can't.
(40568)

Cant Install updates for Google Play Apps - Error - Unable to install to USB or SD Card.

I have recently noticing an increase in an error popping up - cant install to USB or SD card. Any one got a solution for that other than jailbreaking or rooting my phone to fix the issue?

Eolnolatari,
Sorry to hear you are having trouble with downloading apps. We certainly want you to have the benefits available to you. Are you getting this error message when trying to download any particular types of apps? Normally this app is attributed to movable applications, which is not standard for all Android apps. How much internal and external storage do you have available? If you are low on internal storage that means you may have to delete non-used apps to create space for others. Keep us updated on this and we will make sure we get this all figured out.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

USB Ports & USB Card Bus Adapter

I have a Satellite A15-S127 that I bought brand new when they were released the end of May, 2003. In general, it has and still does run great. A few years back I went from using WindowsXP Home, which came pre-installed, to WindowsXP Pro. Just after that the 2 factory installed USB ports in the back of the laptop stopped working. I tried to get them back working and couldn't so I bought a 2 Port USB Card Bus Adapter, which has worked great giving me back useable USB ports. Well, all of a sudden when I insert the Card Bus into the laptop, everything locks up. I can do nothing but remove it and hold down the power button to shut it down and reboot. I even bought a new Card Bus Adapter and it does the same thing. Now I have no useable USB ports.
Im hoping someone can help me to either get my originally installed USB ports working or to get my PC card slot working again.
Thanks
Logan Krewe

I wanted to add to this...I did plug in a CF card the other day and that was recognized. I then tried my external hard drive directly again in a front USB port and it worked for a while (an hour or so). Then it suddenly was not there anymore as if I'd ejected it even though I didn't. Tried to put it back in and nothing. This tells me it may be a hardware problem since it "recognized" it for a bit. It's very frustrating.

Usb issue after install Lion

After install Lion both usb stop working.

Same problem trying to use the Menu button to open the on screen guide in EyeTV. Worked great with Snow Leopard, but Menu button stopped function after update to Mountain Lion.

IPhone 5S Music syncing issues after 8.0.2

Hello,
I have been having irritating issues getting my iPhone 5S to sync my music library over after updating to 8.0.2.
I did a backup onto my laptop prior to updating, and went ahead with the new update. The first thing I noticed was after updating to 8.0.2 in order to sync again, iTunes prompted me that I was lacking 6GB of data on my phone to sync my library. I did not use my phone at all during the updating process so there's no way 6GB of data was magically written on it's storage drive. I could not figure out why in the world iTunes would tell me I needed to free up 6GB to sync the exact same music that was already there prior to. I went ahead and completely deleted my entire Music library from the phone, and tried to resync fresh. I still got the same message from iTunes. Believing in the program and going ahead and doing some spring cleaning, I ended up freeing a good amount of things off of my phone, applications, photos, messages, etc. to drop 6GB from the storage. I went ahead and synchronized my iPhone 5S with iTunes so I could get my music on my phone. It proceeded to go ahead and sync my roughly 1400 songs onto the iPhone. After it was complete, it showed I had an astounding 12GB of free space on my phone... I said to **** with it and just wanted to play my music. The phone seems to have all of my library that I chose to sync on my Music app. The problem is, when I go to play songs the music app will Skip over certain songs. I have not found any commonality between which songs it chooses to skip. It skips newly added songs, it skips old songs, it skips purchased songs, it skips songs downloaded from other sites. There seems to be no structure to which songs it's skipping. Another thing to note, whenever I connect my iPhone 5S to my iTunes and sync, I am Always able to sync something new onto the phone (around step 5 or 6 when it is completing the sync, it will mysteriously add some songs to the phone). Those songs are playable. Then I shuffle through my playlist, and Still the same problem remains, it has removed some songs and skips over them. It seems to Sync songs, and Delete songs... completely at random. This is bothering me and I'm not sure what to do, and am Very unsatisfied with the amount of bugs still left in the software. I wonder if others are having similar issues and maybe we can bring some light to this.
Thank You,
Andrew

Similar issue Andrew. After installing 8.0, the IOS deleted 225 songs from one of my playlists, and I'm still "recalling" songs that are no longer in my Music Library. Fortunately, although the playlist of 235 had only 6 songs left on it ( on my Mac), the Playlist was not erased from my I -Phone. I was able to recreate the Playlist on my Mac, using the intact playlist on my phone. When I synched however, I was back to square one. I went to the Apple store, and I had to reset the phone . We also downloaded IOS 8.02. They saved my playlist in the Cloud, deleted it from my Mac, then synched it. Lo and behold, the playlist I recreated on my Mac, synched to my I Phone. After the reset, I had like 11GB of free space. (Its been 5 days since the "reset" and the number of GBs fluctuates from day to day !!)
When I got home from the Apple store I spent after hours reinstalling all the apps, synchng the phone to the Bluetooth in my car ( you know the rest of the saga) , I purchased a song from I Tunes. I "drag and dropped" it into a Playlist, and synched. Didn't work. Song shows in "Recently Added", but the drag and drop feature doesn't work. Bottom line, I'm not willing to "reset" my phone every time I add a song ! I've tried any number of fixes posted to this support community, but none have worked for me.
Furthermore, it took me 3 hours to get the phone re-synched to the Bluetooth system in my car. However every time I connect to "Bluetooth Audio", the system needs to "find" and "reconnect to" my phone. If you ( or anyone else ) finds something that might work for both the music synch and /or the Bluetooth, I'd appreciate your input.
Thanks, Lorenzo

IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

Kernel panic after installing a USB 3.0 PCIe card

Hello everybody,
I have a recent issue with my Mac Pro (early 2008). I just bought a USB 3.0 PCIe card from eBay for my Mac Pro and as the seller mentioned there are drivers for Mountain Lion. After installing the cards drivers that the seller sent me and plugged the PCIe card, whenever I connect a USB 3.0 device (I have only one) the Mac Pro is forced to reboot. If I leave the drive connected after the reboot I get a kernel panic message during the "Grey Apple Boot Screen" and the computer continues to reboot again and again. I have no issues with USB 2.0 devices at the same card. The kernel I get is the following. Does anyone have any idea? it seems like the kext installed with the card {net.osx86.kexts.VLIUSBXHCI(1.2.4)} causes the problem but the seller told me he has sold a lot of them, and i 'm the first with such a problem.
Thank you in advance.
Tue Aug 27 10:58:35 2013
panic(cpu 3 caller 0xffffff800a4b8655): Kernel trap at 0xffffff7f8aa00cf8, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000c9a4000, CR4: 0x0000000000000660
RAX: 0x000000000b1cb000, RBX: 0xffffff8019bbee00, RCX: 0xffffff801981b010, RDX: 0x0000000000000000
RSP: 0xffffff80bba3b650, RBP: 0xffffff80bba3b690, RSI: 0x0000000000000000, RDI: 0xffffff8019bba630
R8: 0xffffff80bba3b570, R9: 0x0000000000000200, R10: 0xffffff8019bba630, R11: 0xffffff8019bba600
R12: 0x0000000000000000, R13: 0x0000000000000200, R14: 0xffffff80c1c7e000, R15: 0xffffff801981b000
RFL: 0x0000000000010206, RIP: 0xffffff7f8aa00cf8, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000002, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff80bba3b2f0 : 0xffffff800a41d626
0xffffff80bba3b360 : 0xffffff800a4b8655
0xffffff80bba3b530 : 0xffffff800a4ce17d
0xffffff80bba3b550 : 0xffffff7f8aa00cf8
0xffffff80bba3b690 : 0xffffff7f8aa0a625
0xffffff80bba3b6c0 : 0xffffff7f8aa0a2a9
0xffffff80bba3b770 : 0xffffff7f8aa09f1a
0xffffff80bba3b7d0 : 0xffffff7f8aa036f3
0xffffff80bba3b7f0 : 0xffffff7f8a9b3591
0xffffff80bba3b850 : 0xffffff800a84907a
0xffffff80bba3b8b0 : 0xffffff7f8a9c400e
0xffffff80bba3b910 : 0xffffff7f8a9c41dd
0xffffff80bba3b970 : 0xffffff7f8a9a2eec
0xffffff80bba3b9a0 : 0xffffff7f8a9a1bbf
0xffffff80bba3b9e0 : 0xffffff800a83085b
0xffffff80bba3ba40 : 0xffffff7f8a9a1b09
0xffffff80bba3ba70 : 0xffffff800a84907a
0xffffff80bba3bad0 : 0xffffff7f8a9a1a74
0xffffff80bba3bb10 : 0xffffff7f8aeaa195
0xffffff80bba3bb40 : 0xffffff800a83194b
0xffffff80bba3bb80 : 0xffffff800a83146e
0xffffff80bba3bc10 : 0xffffff800a82d400
0xffffff80bba3bc50 : 0xffffff800a82d10f
0xffffff80bba3bc90 : 0xffffff800a82cfc4
0xffffff80bba3bcd0 : 0xffffff7f8a9ad2bd
0xffffff80bba3bd00 : 0xffffff7f8a9adb68
0xffffff80bba3bda0 : 0xffffff7f8ae08b47
0xffffff80bba3bdd0 : 0xffffff7f8ae085b9
0xffffff80bba3be40 : 0xffffff7f8ae07f6c
0xffffff80bba3be60 : 0xffffff800a83194b
0xffffff80bba3bea0 : 0xffffff800a83146e
0xffffff80bba3bf30 : 0xffffff800a82d400
0xffffff80bba3bf70 : 0xffffff800a831fc9
0xffffff80bba3bfb0 : 0xffffff800a4b3137
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7f8a997000->0xffffff7f8a9f2fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8a96e000
         net.osx86.kexts.VLIUSBXHCI(1.2.4)[00000000-0000-0000-0000-000000000000]@0xfffff f7f8a9ff000->0xffffff7f8aa17fff
            dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f8a997000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8a96e000
         com.apple.driver.AppleUSBComposite(5.2.5)[E52D4507-6DB1-392E-B46B-FC7107573D4C] @0xffffff7f8ae07000->0xffffff7f8ae0dfff
            dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f8a997000
         com.apple.iokit.IOUSBAttachedSCSI(1.0.3)[1EBCBF6E-4BB8-341D-8B0B-D35C69425E67]@ 0xffffff7f8aea6000->0xffffff7f8aeadfff
            dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f8a997000
            dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8aa96000
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.5)[DCE95F6E-F7D4-33D8-9515-FB C4FF5B1AB4]@0xffffff7f8ab65000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x000000000a200000
Kernel text base: 0xffffff800a400000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 1372235172
last loaded kext at 1219506626: com.apple.driver.CSRHIDTransitionDriver          4.1.4f2 (addr 0xffffff7f8b24a000, size 16384)
loaded kexts:
com.rogueamoeba.InstantOn          6.0.2
net.osx86.kexts.VLIUSBXHCI          1.2.4
com.apple.driver.CSRHIDTransitionDriver          4.1.4f2
com.apple.iokit.IOUSBAttachedSCSI          1.0.3
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBXHCI          5.6.0
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleIntel8254XEthernet          3.1.1b1
com.apple.driver.AppleAHCIPort          2.5.2
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBUHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2.1
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOATAPIProtocolTransport          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          5.6.0
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

That card appears to be a Via Labs VL800 and Via has no Mac drivers, so gosh only knows where that kext came from. I'd highly recommend you remove it and consider getting a card from Sonnet where you can get proper Mac support:
http://www.sonnettech.com/product/allegrousb3pcie.html
To me it's not worth saving a few bucks from some generic card/driver pair to risk problems and perhaps even malware.
Regards.

Sync issues after installing Dynex USB 2.0 Card Bus Adapter

Similar Messages

Maybe you are looking for