Sync issues after upgrading to ios 7

After upgrading to iOS 7 on my iPad 3 with no problem at all, I lost all my music. When I try and sync with iTunes 11.1 (on Windows 7) it hangs on the last step "waiting to apply changes", and the little sync icon on the iPad disappears. I can't even add or remove apps. Any solutions out there?
Thanks in advance.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Similar Messages

Yahoo mail sync issue after upgrade to iOS 5

After i have upgraded to iOS 5 my emails from Yahoo are a month off.
Only the emails from a month before are synchronized. As an example, today 10/24 I can see the emails from until 9/13.
Any ideas on how to fix this?

Ok, thanks everyone's experience sharing with each other. after I try so many time with my bro for this issue, finally we got solution to solve this issue.
I'm using iPhone 4 and my bro is using iPod touch 4th Generation, we both upgrade to iOS 5,
then I was thinking that when I do Facetime setting, there is a selection that you can use your Apple ID as your Facetime account, so I changed my Facetime account with Apple ID, the default setting is using your phone number. then its works!! now I can use Facetime with my bro in airplane mode.
I guess before I upgrade iOS 5, iOS 4 allow Facetime auto detect to use phone number(if airplane mode is off) or use Apple ID, which your email address to connect to another user, but iOS 5 not allow it or disable auto detect, (I just guess).
anyway now I only use Apple ID as my Facetime account, then I can use Facetime under airplane mode. hope it help you guys.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

IPhone 4s issues after upgrading to IOS 8

Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
Venkat

No way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

Freeze/Battery issues after upgrade to iOS 8.0.2

Since upgrading my 3rd Gen iPad WiFi to iOS 8.0.2 I have been experiencing freezes where nothing works. I can't open apps or do anything. If I hold the on/off button down eventually it comes back to life. Second issue is battery life. Last night I closed my smart cover and made sure the display was off. Battery at the time was 62%. This morning I opened the iPad smart cover and the battery was down too 23%. This has happened a number of time over the past week or so. I have Blue Tooth and Location Services off.
Both of these issues are new after upgrading to iOS 8.0.2. No problems whatsoever prior to that.
Not sure if I'm putting this in the correct category or not.
Is there a way to wipe the iPad clean and reinstall everything from scratch or is my iPad just shot? Thanks in advance.

Same sort of issues here on my ipad3. iOS 8 turned it from a nice slick device into a jerky, laggy pain. Tried all the reset options and it's still pretty crap.
NIce one apple, I'm changing to a galaxy tab after you broke my iPad!

WIFI intermittent connectivity issues after upgrading to iOS 8.0.2

Hi,
WIFI seems to be dropping a lot after upgrading to iOS 8.0.2. I even took the iPad back to Apple and they replaced it with a new one with iOS7, which was working fine, then the same problem resurfaced after upgrading to iOS 8.0.2. I can't use my iPad in the evening at all.
My iPhone is fine after the upgrade though.
Clearly an iOS8 software issuse on iPads?
Thanks

Similar thing happened to me.. Seems like the bug has not been solved.. I managed to restore to iOS 8 and this resolved the issue, at least for the time-being!
Apple team, my sincere request to you:Please attend this bug asap. It really dissolves the purpose of an iPhone..
Keeping my fingres crossed till then!

IPhone 4S wont sync music after upgrading to iOS 7 on windows 7

After upgrading to iOS 7 on my iPhone 4S, I lost all my music.
When I try and sync (USB) with iTunes 11.1 (on Windows 7)
it hangs at the last step "waiting for changes to be applied" (step 5 of 5)
i am looking for weeks for a solution to this problem and i saw meny pepole suffer from it
but still i cannot find a way to fix it
help me please

You got it downloaded and I assume you mean it is installed as well. It was buggy for me.
I had to close and restarted iTunes before I could use it properly.
Then, I had to unplug and replug in my phone before it recognises it.
Just had to try everything. As final choice, update over the air. I try to avoid it as it tends to have more problems than a tethered update.

Cisco 7200 VSA issue after upgrade to IOS 15.2

After upgrade to IOS 15.2(4), VSA module in 7206VXR (NPE-G2) is disabled and we cannot enable it.
Show diag output:
------------------ show diag ------------------
Slot 0:
VSA IPsec Card Port adapter
Port adapter is deactivated
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
PCB Serial Number        : JAF1309ADDT
Hardware Revision        : 1.0
Part Number              : 73-10220-05
Board Revision           : B1
RMA Test History         : 00
RMA Number               : 0-0-0-0
RMA History              : 00
Deviation Number         : 0
Product (FRU) Number     : C7200-VSA
Version Identifier       : V01
Top Assy. Part Number    : 68-2578-05
CLEI Code                : CNUCAFNAAA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF C1 8B 4A 41 46 31 33 30 39 41 44 44 54 40
0x10: 05 0D 41 01 00 82 49 27 EC 05 42 42 31 03 00 81
0x20: 00 00 00 00 04 00 88 00 00 00 00 CB 94 43 37 32
0x30: 30 30 2D 56 53 41 20 20 20 20 20 20 20 20 20 20
0x40: 20 89 56 30 31 20 D9 03 C1 40 CB 87 44 0A 12 05
0x50: C6 8A 43 4E 55 43 41 46 4E 41 41 41 FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
If we try to enable it manually from CLI we get the following message:
Router(config)#crypto engine slot 0
VSA will NOT come up until system power-cycle or reload
Of course, after reload nothing happens.
Is VSA incompatible with IOS 15.x? I'm asking because downgrade to 12.4 causes VSA to be active again.
Regards,
Igor

Hi igor,
1) FDP image
Field-programmable devices (FPDs) are hardware devices implemented on router cards that support separate software upgrades. An FPD image package is used to upgrade FPD images
The FPD image package must be compatible with the Cisco IOS software that is running on the router. If an incompatibility exists between an FPD image package and the Cisco IOS software release running the router, the device with the FPD will not operate properly until the incompatibility is resolved.
The FPD automatic upgrade feature searches only for the FPD image package file that is the same version number as the Cisco IOS release being used by the system. For example, if the Cisco IOS release being used is Cisco IOS Release 12.4(5)T1, the system searches for the FPD image package file that supports the specific Cisco IOS release (c7200-fpd-pkg.124-5.T1.pkg).
2) Steps to Upgrade:
From the document below which I already sent you, please refer to the section “How to Upgrade Field-Programmable Devices”
http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/fpd.html
I would recommend you to follow the steps in the “Field-Programmable Device Quick Upgrade (Automatic FPD Upgrade Only)” as that is the recommended and the easiest way.
Steps are:
The command is present “upgrade fpd auto” in the running-config by default.
Have the Cisco IOS image in disk2:
Download the FPD image package to disk2: flash disk
Reboot the router using the new Cisco IOS release.
Hope this helps
Thanks
Syed

Mac OS X 10.6.5 fixes sync issue after upgrading to new MobileMe calendar

The issue that prevented iSync from 'seeing' calendars after upgrading to the new MobileMe Calendar has been fixed in iSync 3.1.2, part of the Mac OS X 10.6.5 update.

Appointments made on my phone are now synced to the local calendar. How do I get these in the cloud and synced with my other devices (macbook and ipod touch)?
Unfortunately, this is the way it works now. I asked Apple about this and got the following response:
+"Events from CalDAV calendars can be synced via iSync to a phone, but events can only be created on local calendars. This is as designed."+
I haven't tried it yet, but I presume you drag events from the local calendar to the MobileMe calendar, but I don't know how this would handle duplicates.

Ipad 2 Wifi issues after upgrading to ios 7

I live in a small house, 750 sq ft area (30 x 22). Ipad wifi was working fine in all the rooms before upgrading its iOS to 7. After ipad2 iOS was upgraded to iOS 7, wifi now works in the room where the Wifi router is located. But does not receive Wifi signal in any other room. I tired everything that has been suggested in the forum - like changing the router settings (channel, security etc),playing with ipad2's wifi, etc. etc. But to no avail!
Clearly the bug in iOS 7 has caused this issue! How does one log this issue with Apple tech support team so they can rectify this issue in iOS 7 patch? Also, please let me know if I should be trying anything else. Thanks!

I have exactlythe same issue. Have had ever since the upgrade to iOS 7. It's nothing to do with the router. It has to be a bug in iOS 7. Question is, would upgrading to iOS 8 help at all??? Anyone done this.?? I used to love my iPad and it was never out of my hand. Now I just hate it and use my Kindle Fire all the time instead. I used to pick up wiif signals across the street. Now I have to be sitting on a router to connect.
<Edited by Host>

Signal issues after upgrading to ios 6.1.2

ever since i've upgraded to ios 6.1.2 have had problems with my signals, hv never seen all bars; 2 at most. hv drop calls all the time. it;s irritating . tried evry thing like network resets, turning off/on 3g and lots of stuff suggested in other threads bt in vain . happened once before in one of the ios 5.something series bt ws fixed on the next ios upgrade. apple needs 2 fix this soon and launch the next update .once fixed i dnt think i'l eaisly try experimenting with ios updates.

Exactly the same as me. Updated now can not get FaceTime to work. Just hangs on the connecting page then loses connection after several seconds.
Friends calling me does the same thing.
It is not our router, I can download and upload data quickly without any problem.
Who quality controls IPads? Seems lots of mike and connection problems with Talktime at the moment. Apple must be embarrassed.

Font render issue after upgrading to iOS 4.2.1.

Hi,
I happen to have a friends iPhone, trying to restore it with original firmware 4.2.1, but it keeps a font issue where it has trouble getting it right.
http://www.stepserver.nl/~step/3gs1.PNG
http://www.stepserver.nl/~step/3gs2.PNG
I tried to recover the iPhone in any way, tried different languages. Inverted the screencolors all to no avail. Does anyone have any idea what I can do to correct this issue? Or is this an overheating problem (GPU related), however the icons and background and rest of the iPhone is alright (except all the fonts..)

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

HT4623 iPhone 4 (2011) very sluggish and battery issues after upgrading to iOS 7

Hi,
I am experiencing crazy sluggishness in my GSM iPhone 4 (2011 model) after recently upgradig to iOS 7.0.2 from 6.1.3. Phone's freezing every few seconds and when it does, you can't do any activitiy, keyboard will not respond, videos will freeze etc.
Top of it, the battery is drying up like nuts. It used to work for more than 24 hrs with same settings earlier, now hardly 7-8 hrs !!! ..... I turned off everything like background-app refresh, wireless, 3G, bunch of other things, infact not even keeping any apps running in background while not using, I immediately kill it as soon as I am done using it.
Am very badly stuck, biggest mistake of my life that I ugpraded to iOS 7
- Is anyone experiencing similar issues ?
- Is there any way I can go back to previous version ... is Apple still signing iOS 6.1.3 ? I don't have shsh blob backup of previous version.
Any thought is greatly appreciated.
Thanks in advance,
Rajiv

rajivrp wrote:
Hi,
..Phone's freezing every few seconds .
Any thought is greatly appreciated.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also try a Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If no joy...
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
rajivrp wrote:
- Is there any way I can go back to previous version ...
Apple does Not Support Downgrading... Never has.

ITunes not syncing apps after upgrading to ios 5 - Help :(

I downloaded the firmware for ios 5 as it took 60 mins to download last night, and when it got to 10 mins, it errored. I backed up everything, and it gave me the option to restore backup once i had installed the new ios firmware.
However, all it gave me was my contacts and photos. In my itunes library, i have all my apps there, but i am unable, after 2 hours, to find a way to get the apps in my itunes to go on my ipod. I tried nearly everything:
Unticked manually manage music and videos
Restored old back up
Googled for over an hour
Authorised my account
Restarted computer several times
Uninstalled/reinstalled iTunes a few times
Pressed "sync" over 50 times
All my apps are in my library and i have found all the .ipa files on my file browser. The problem isn't redownloading all my apps again, its all the saved levels, settings etc on my games/apps. Here is a pic of my itunes if it helps... http://i51.tinypic.com/34gq1b4.png
Many thanks in advance,
Yoni

I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

Iphone 3gs does not sync music after upgrading to IOS 5

I upgraded my Iphone 3GS to IOS 5. This introduces Icloud. Since doing so, I have not been able to sync my music. I get the error message "unable to sync - not enough free space (additional 8.4 GB required). This is the same size as the music I want to load to my phone, which was fine before the upgrade. Any help gladly received. Thanks

Does anyone have any solution???
Reply ASAP...
My iPhone has turned into an iPod since l upgraded...

Sync issues after upgrading to ios 7

Similar Messages

Maybe you are looking for