Sync issues with Final Cut
Been browsing around the Intertubes for a few days, and can't seem to find the answer for which I'm looking.
I'm an assistant editor at a small post house, and have had issues with media getting out of sync after having been captured. This is not another DV media sync question; I've had it occur on material being digitized from a Sony DVW-500 Digital Beta deck through an AJA Io I/O card, using RS-422 controller and the "Capture Clip" setting, not going through Capture Now.
The worst I personally have dealt with has been 1 or 2 frames of difference between audio and video, but it's very frustrating, especially when dealing with spot reels. Some of my compadres are telling me horror stories about large scale QT movies getting out of sync. However, this was a feature-length movie that we were importing, and the suspicion is that the partitions on our RAID array were causing problems (drives getting too full, etc.).
Can anyone help?
t looks out of sync with lips, but when I've slipped it back or forward manually, it gets back in sync, both on layback of masters and in timelines.< </div>
Put a copy of the clip into a timeline, separate the audio from the video, get properties on each. Are they different lengths? If so, just adjust the length of the audio to match the video using Speed. If it's just one or two percent, there will be no discernible difference when the audio re-renders.
What's the source of the clips? If it's a Canon camera, no that Canon uses a weird DV codec and this has been a problem since, like, forever.
bogiesan
Similar Messages
-
Importing issues with Final Cut Pro X. Green flash and twitches while play back
Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fpsMy Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps -
Compatibility issues with Final Cut Express and Final Cut Pro
I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
If I transfer project files from one platform to the other will i run into any issues?
Thanks for all and any help.{quote:title=cuttingedge wrote:}
If I transfer project files from one platform to the other will i run into any issues?
{quote}
Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE. -
Is my issue with Final Cut Pro or my Macbook pro?
I'm going to try to be as thorough as possible in explaining my situation because I can't figure this problem out and it's exhausting me. I have an early 2011 macbook pro with the 2.2 ghz processor. I upgraded to 16gb of ram almost a year ago. I've been using Final Cut Pro 7 on this computer for several years now without issue and have made no setting changes that would prompt my problems. A few months ago my battery decided to stop holding a charge and now just registers 0%. Around the same time, while editing a short video my computer began behaving like it was overheating. It would crash, restart, crash and then restart again. After I did a disk and permissions repair it began to work normally again and I haven't had any more crashing issues. Around this period of time I began noticing that when my computer turns on it doesn't register the correct time and date. Given a few moments it corrects itself, but for some strange reason it was doing that every time.
Anyway, around that time I tried to upgrade to Mavericks and experienced an issue during installation because my hard drive was apparently damaged in some way and the installation couldn't be completed. I restored my previous OS and tried to carry on as I was with the damaged hard drive for as long as I could. I was still able to do everything I needed on the computer. I could still edit videos with Final Cut. I could still browse the internet. I could still stream Netflix.
About a month ago Final Cut stopped working. I could open the program, start a new project and import media files, but when I dragged them into the timeline, they just stuttered (audio would play but video would lag and then jump several frames then lag and jump frames). At the time I assumed this was because my hard drive finally gave up, but I was still able to do other functions like browse the internet and stream basketball games with nba league pass (granted they weren't crisp hd - on a side note, netflix was also behaving oddly. when I would browse through my list, it wouldn't stop scrolling when I moved the mouse away.) so I assumed the hard drive was my issue.
I just replaced my hard drive with an ssd (crucial m500) and upgraded to mavericks (10.9.1) and now I am having the same issues. Netflix behaves fine. Basketball games stream fine. My battery is still dead (obviously that wasn't going to change). I get the wrong date and time for a minute, but I'm thinking that's battery related now. But Final Cut still lags to the point where I can't use it. Video clips also won't render. I thought this might be an issue with the Final Cut program so I uninstalled it and reinstalled it, but it still did the same thing. Assuming I hadn't correctly/completely uninstalled it, I downloaded HitFilm 2 (an editing program that had a free download promotion at the time), figuring using a different program, if i could edit video with it, then my issue is with Final Cut and not my computer. Unfortunaely, I'm having the same lagging issues with HitFilm as I was with Final Cut.
I'm at a loss as to what the problem is. Sorry if this was a rambling post, but I wanted to get as much of the background out there as possible, should it provides anyone with a clue as to what is the issue here. Does anyone have any idea what could be at fault here? I'm stumped.Hardware Information:
MacBook Pro (15-inch, Early 2011)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 5 days 3:30:18
Disk Information:
Crucial_CT480M500SSD1 disk0 : (480.1 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
SSD (disk0s2) /: 479.11 GB (235.88 GB free)
Recovery HD (disk0s3) <not mounted>: 784.2 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.bombich.ccc.plist 3rd-Party support link
Launch Agents:
User Launch Agents:
[not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
WDQuickView
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
OVSHelper: Version: 1.1 3rd-Party support link
Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
DivXBrowserPlugin: Version: 2.2 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Bad Fonts:
None
Old Applications:
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
WFTPairing: Version: - SDK 10.4 3rd-Party support link
/Applications/Canon Utilities/EOS Utility/WFTPairing.app
Nisus Thesaurus: Version: 1.1 - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 2
Oldest backup: 2013-04-15 00:34:39 +0000
Last backup: 2014-01-22 03:55:49 +0000
Size of backup disk: Excellent
Backup size 931.16 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
4% WindowServer
3% EtreCheck
0% ps
0% aosnotifyd
Top Processes by Memory:
180 MB Safari
164 MB Finder
164 MB com.apple.IconServicesAgent
115 MB PluginProcess
105 MB com.apple.WebKit.WebContent
Virtual Memory Information:
11.22 GB Free RAM
2.77 GB Active RAM
296 MB Inactive RAM
1.71 GB Wired RAM
782 MB Page-ins
0 B Page-outs -
Import issues with Final Cut Express HD
I shot video with a Nikon AW100 and made a quick video and everything worked fine.
The next day, I tried importing more clips for another video and it crashed every time. No settings were changed on the camera or software.
I trashed Final Cut, reinstalled it and got the same issue.
I installed it on another Mac with the same problem there as well.
Can anyone help me with this?Some info, please ...
What versions of OS X and FCE are you using? Exactly what model Mac are you using?
What settings did you use in your camera when you shot the video that worked? That didn't work?
What Easy Setup are you using in FCE?
A few things that may be contributing factors ...
Only FCE 4.01 on an Intel Mac supports AVCHD video
However your camera (the AW100) may not exactly be an AVCHD camera ... it shoots MPEG4/AVC H.264 which is not quite the same as AVCHD
FCE does not work with H.264 video; the video needs to be transcoded to QuickTime/Apple Intermediate Codec to be used in FCE (before being imported into FCE)
Two of the shooting modes in the AW100 are not supported in FCE: 1080p and iFrame -
Issue with Final Cut Pro 7 and Maverick OS.
I wanted to know if anyone was having issues with the new OS X 10.9.4 and Final Cut Pro 7 Studio? Are there any other solution other than purchasing new editing software?
I have FCP 7 running successfully on Mavericks 10.9.4 - although I mainly use Premiere Pro/Adobe CC now.
MtD -
Exporting issues with Final Cut Pro X
I have been working on the project for a few weeks now and it's been working fine till today, Im trying to export several clips from the same footage that was divided into seperate project files and every time I try to share it gives me an error message with a frame number. I've seen other people are having the same issue but none of their solutions worked - the frame number is different everytime, I dissabled all effects and I tried copying and pasting the sequince into a new project file but that didn't work either.
i only can speek for my situation
PROCESSOR 2.7GHz Quad-core Intel Core i7
MEMORY 16GB 1600MHz DDR3L SDRAM
FLASH STORAGE 512GB Flash Storage & mavericks mit eingeschaltetem app nap
i do not have a bad frames within my original file or project and a new user account was also not necessary,
but deactivation of APP NAPP was at least 2 times a solution. under mavericks i could export for the first time with no error
thanks for the tip!!
http://stockoto.com/final-cut-pro-x-stops-rendering-app-nap-osx-mavericks-backgr ound-processing/ -
Docking Issue with Final Cut Pro 6
I have an issue while docking FCP6 to work in another app. FCP will not undock and I am having to force quit every time I dock it.
As David already said -the question has been posted here dozens of times and no-one has a solution.
You have Mac OS X 10.6.2 according to the info under your message. Go to System Preferences and activate Spaces -it's a much more elegant way of working. -
Issues Capturing with Final Cut Express
Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD -
Sync issues with Thunderbolt drives
I'm checking to see if there are any sync issues with Mac Book Pros pre-Retina screen.
I have a (13-inch, Mid 2012) 2.5 GHz Intel Core i5 Mac Book Pro and I'm having some sync/latency issues with a number of audio interfaces, including a Symphony I/O and a MBox Mini 2.
I'm editing with Final Cut Pro 7. Mavericks OS 10.9.5. It's also happening with QT 10.3.
I'm using a Thunderbridge with the Symphony I/O and the USB port for the MBox Mini 2, but it has the same issue. I'm trying to get the registration number for my Pro App version of QT 7 because QT 10 is having some issues with a few arcane video formats. Is that possible? I can't retrieve the email because the computer that might have it is long dead, and buried in storage.
configuration:
Mac Book Pro to
G RAID Studio (via Thunderbolt) to
(Apogee Symphony I/O Thunderbridge)
1080P monitor (via Belkin Mini Display port to HDMI cable)
or MBox mini via USB
Both of these setups have sync issues. I have rigged a 1/8" stereo plug out of the headphone output and except for the occasional deafening buzz when you touch the adapter, it works okay, with no seeming sync issues.
Is this a thing? I understand that there is an issue with Symphony I/Os and certain Haswell Mac USB 3.0 ports.Hi,
Yes, I apologize. The video editor wasn't giving me any details. I did see the 44.1/48khz issue online. So will this happen only if both are mixed in the same timeline?
Thanks -
Major CalDav and Syncing Issues with Ical and Address Book
As a CEO and business owner - I loved the move over to Mac after the intel chip as installed. Yet, the issue of working on a Mac for business comes down to the operating system. Up to Snow Leopard I was very pleased.... since Lion it has gone downhill. I upgraded to Mountain Lion and many of the issues with speed and problems with mail were addressed. Yet, it appears Apple has made a bad decision with regard to synciing to other programs.
I was told it has cut out syncing capablities for Address book and Ical (I assume other programs). This has caused great issues for The Omni Group, File Maker and Market Cirlce (creators of Daylite) and a lot of angst for me as a business owner!
To top this off - it appears CalDav is not bi-directional and has issues. In other words, it does not work as it should.
I am not sure what Apple was thining when it stopped allowing internal sync between programs. Yet, CalDav and CardDav are not always the answers!
I hope the CalDav issues are being cleaned up and if anyone from Apple wishes to comment on this I would appreciate it. I have tried to talk to support but the powers to be are the ones calling the shots on software design. Support can't fix what is broken the program.
Again, I hope Apple revisits syncing. Maybe the concern is security but it is MY DATA not yours. I just want the programs to work so I can make sales and support my customers efficiently. You have made it hard to do this with changes.
DavidAs an IT consultant, i'm in agreement with Mr Utts. The promise of "it just works" died with Steve Jobs. Mac OS has been in freefall since 10.5 . I need a fully functional OS, not an iPad on my desk. ( this means YOU Forstall !! )
Why break Samba ( a standard ), why break WebDAV ( a standard ), why break CalDAV ( a standard )?? Apple has done ALL of these things and they seem to be doing it on purpose.
The Apple "ecosystem" is just fine, but removing functionality as fast as you can, and removing interoperablity as fast as you can... if Apple products ONLY work within the ecosystem... people can and will leave Apple. You've already run off the business users by refusing to make a real Server or real Server software. You ran off the video user with Final Cut Pro X. Dumbing down (and breaking) the OS is running off the IT User.
Mac OS used to easily walk the line of "hard core enough for a Unix Guru, easy enough for your Mom". Now they just want the Moms.
And i disagree, we are ALL "qualified to say what Apple might do about this...", they will do nothing. They don't beleive they have made a mistake. They beleive WE are the problem by stubbornly insisting that things that used to work should continue to work. -
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name. -
How to replace audio on a music video with final cut pro x
How do I replace low quality audio on a music video to a higher better quality audio with final cut pro x?
I have the new audio on cd which I can rip and replace the original audio.
Some audio and music videos are not of same length, In cases like this how do I sync video to the newly replaced audio?
Is there any tutorial, link or where to look for this in the manual?
Any help will be very much appreciated.
Thank you in advance.Providing you don't need the video synced or cut to a beat, all you need to do is place your music in the primary storyline
Connect your video above.
While your video is connected, hit CMD+R on your keyboard and stretch the video to the length of the music
If you were to cut the video to a beat, simply add markers on your music track, then connect and trim clips to your markers. -
This is my present computer:
iMac 3.06GHz Core 2 Duo (2008 model)
4 gigs of 800 mhz ddr2 sdram (this is the max ram for this computer! )
NVIDIA GeForce 8800 GS 512 MB
Hard drive: 465 gig (I use mainly external drives for editing)
I use this mainly for video editing with final cut studio 2.
Rendering in compressor takes forever!!!
A friend suggested I pick up a used G5 Power PC.
I found this one, here are the specs:
APPLE POWER MAC G5 PowerPC DUAL CORE (2 x 2 GHZ)
System Mac OSX 10.5.8
RAM 12 GB
1 Hard drive of 160 Gb
Superdrive 16x CD/DVD/DL DVD (32x)
Video card NVIDIA GeForce 6600 (VRAM 256 Mb)
3 open PCI-Express expansion slots.
1x FireWire 800
3x FireWire 400
4x USB 1 and 2
2x Ethernet Port
2x Displays ports
Is this insanity or a smart move to move over to the older G5.
According to my friend, the older G5s are much better at processing video.
Is a dual 2 GHZ processor enough or would I need a 2.3 or 2.5?
OR is there another option that someone might be able to suggest?
I would be so appreciative of any opinions regarding this issue.
Thanks in advance.
BillSave your pennies and look for a refurbished or used MacPro. Early 2008 or newer 8 core machines w/8GB of RAM running 4 instances in QMaster will chew through material.
Beyond running compressor, it is just a better all round machine for editing video.
• it has multiple internal drive bays which run via SATA connections - much faster than the FW800 limits of the iMac for external drives
• it has 3 slots which give you the option of an i/o card from AJA, Blackmagic or Matrox so that you can actually monitor your video properly as well as ingest high end formats
• the slots give you the ability to connect esata raids for even higher data speeds
• you have much greater flexibility with computer monitors
• you have much greater RAM capacity
and so on ...
x -
Syncing Issues with ICAL & Missing .Mac Icon... related?
We have been having problems with our ICal syncing for weeks, to the point where we have just stopped using our ICAL all together.
But now, my .mac icon, which I use to access my backup database is missing off my computer as well, and also missing off one of the other network computers.
Are these things related?
Any updates on when the syncing problems will be resolved?As an IT consultant, i'm in agreement with Mr Utts. The promise of "it just works" died with Steve Jobs. Mac OS has been in freefall since 10.5 . I need a fully functional OS, not an iPad on my desk. ( this means YOU Forstall !! )
Why break Samba ( a standard ), why break WebDAV ( a standard ), why break CalDAV ( a standard )?? Apple has done ALL of these things and they seem to be doing it on purpose.
The Apple "ecosystem" is just fine, but removing functionality as fast as you can, and removing interoperablity as fast as you can... if Apple products ONLY work within the ecosystem... people can and will leave Apple. You've already run off the business users by refusing to make a real Server or real Server software. You ran off the video user with Final Cut Pro X. Dumbing down (and breaking) the OS is running off the IT User.
Mac OS used to easily walk the line of "hard core enough for a Unix Guru, easy enough for your Mom". Now they just want the Moms.
And i disagree, we are ALL "qualified to say what Apple might do about this...", they will do nothing. They don't beleive they have made a mistake. They beleive WE are the problem by stubbornly insisting that things that used to work should continue to work.
Maybe you are looking for
-
Schedule Lines not getting created in MRP
Dear All. I created Scheduling agreement and assigned this Scheduling agreement in Source list with indicator 2 which is u201CRecord relevant to MRP. Sched.lines generated automaticallyu201D Then I run MRP using MDO3 and parameters Processing key: NE
-
Cannnot use 3TB hard drive to install Windows Server 2008 R2
I am trying to install Windows 2008 R2 on a server with a 3TB HDD, but I can only create a 2TB partition on the hard drive, leaving around 800GB which I cannot even access. I can install Windows on the 2TB partition, but even after installation, I ca
-
Connecting to a database on a LAN
I have developed a system and it runs well. The only problem is that, it can not run on the client machine accessing the server database on another machine. I suspect that my connection to the database may not be fit for a LAN batabase connection. Be
-
Hey, I was wondering if anyone know how to use a Contenct Delivery Network (such as Amazon S3) to host large images on my Muse site so that they upload faster? Thanks
-
I set this up years ago (before sync) and direct my profile to "My Documents" folder so it can easily be backed up with everything else. (I use profiles.ini in the default Firefox folder to do this). However as well as storing useful stuff the cache