Sync Issues with Imported Audio
I work for a company that produces live shows for clients. Unfortunately, the audio technician failed to record audio to the video. Luckily, we had recorded audio on to a cassette tape. My boss then transfered the audio into .wav files.
The problem is that the audio appears to be playing at a different speed than the video. I can get it synced up for a few lines, but then it drops off. I even tried re-exporting the audio as a quicktime movie at 29.97 frames per second.
Does anyone know why this might be happening and how to fix it?
I appreciate it.
-Dave Owens
Unfortunately Mr. Cookman, it is pretty scattered. The audio is ahead at some points and behind at others.
So I'm just going to have to do the tedious thing and alter it every ten seconds or so.
I've been playing with this for a few hours and the best way I've found is to speed up the video to about 110% at some points and slow it down to 90% at other times. Since it's basically a gentleman speaking at a podium, you cannot really tell I've altered the video.
Tedious, but effective. For the most part.
Similar Messages
-
Final Cut 7 audio sync issue with external audio
Ok, I've seached around a lot and still haven't found the solution for this common issue, which is sync between video and audio wich were recorded in two different devices.
My video is from a conference (a lady speaking all the time) ProRess 29.97 and my audio is wav recorded at 44.1 Khz. I have already converted my external audio to a fine AIFF 48 Khz, and I have already re-imported it with the correct 29.97 easy setup, as it shows on this video www.youtube.com/watch?v=Nt-nfelM8KA. That helped a lot but audio still goes out on sync when playback goes further (not that much, but it shows).
On Premiere Pro, that wav file a correctly in sync, and I have had this issue before with FCP and now it has come back! help!
Anyone found a real solution for this issue?Why not just use Premier? FCP is going to slowly die out anyways....
Anyhow, a work around... using the speed change tool (sss) adjust the audio to be the same length of the video so it is in sync... Press command-J, make note of the percentage you sped up your audio. Now open your audio in STP, select all of your audio go to Process>Timestretch and adjust the audio and apply the same percentage.
Listen to your audio. STP's time stretch is excellent because it adjusts the speed without changing the pitch.
Save as, re-import your audio. -
Premiere Pro audio sync issues with 48khz audio on video file and 44.1khz audio on external audio
So, I recorded video and audio on my Canon 5D Mark II at 1080p, 23.976 fps, and 48khz, 16-bit Stereo audio. And I used a Zoom H4 to record an mp3 audio file at 44.1khz Compressed. When trying to sync the audio in Premiere Pro CC, the audio slowly loses sync over time. I already tried to convert the 44.1khz mp3 file to 48khz in Adobe Audition. But that didn't fix the problem. Any ideas?
There's always time-stretch changes to the audio file with "keep pitch unchanged" checked, I suppose. Mind you, I've heard of people doing it but haven't done it myself. There's other possible options I'm sure. There's been quite a few threads here on time-sync issues over time.
-
Syncing issues with M-Audio Profire 2626
I'm posting this just to see if any other Logic users have had similar problems with the PF 2626. I suspect it is due to the PF's driver, but either way Logic doesn't seem to work with it as well as I'd like..
In order for it to work properly, I have to open the PF preferences, switch the sync source to internal, toggle the sample rate (off and back on to your desired rate) and then switch the sync back to optical port A (in my case). Otherwise, I get no audio - or have to deal with pops and noise as the interface will not sync internal without this convenient little process...
My problem in Logic is that I get a lot of unwanted noise from the preamp when I'm recording with phantom power - this never happens in ProTools M-Powered, which is what I've recently jumped ship from. So why would it be any different in Logic? The aforementioned noise starts up like a tea kettle, and gets progressively louder until it just sustains a steady whistle. Once I turn off phantom power you can hear it 'wind down' until it recedes behind the noise floor...
Again, this doesn't sound entirely Logic based but it is unique to my experience with this software, and I would like to connect with any Logic users who have dealt with this...
ThanksApple has nothing to do with it. Apple has no access to M-Audio's computers or the code for M-Audio's drivers. M-Audio let their customers down and stopped supporting their devices.
-
Playback pauses and audio sync issues with live video stream
I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player. It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams. It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux. I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
To see the stream with the Akamai player, go to: http://live.kulabyte.com
To see the stream with the OSMF/Strobe player, go to: http://live.kulabyte.com/osmf
I do not have JW set up for public viewing yet, but the two above show the distinct difference.
We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
If someone has ideas on debugging I can PM the actual video assets to you.
Thanks,
TimHi Tim,
You need to add this setting:
dynamicStreamBufferTime=8
The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
Looking forward to your confirmation that this solved your issue.
-Andrian -
Audio Syncing Issue with iMovie 10.0.1
As was the case with iMovie 9, there is an issue with the audio syncing properly to the video when uploaded to YouTube. I am wondering if anyone knows of the workaround for the same issue with iMovie 10 (Mavericks)?
Thanks!The bar codes are generated from an online service and are downloaded as vector art in the form of EPS files.I am opening the file in Illustrator after downloading the EPS file. I am not scaling it in any way, it just opens in Illustrator "wrong". "Placing" the file creates the same distorted effect. The EPS file looks fine if I view it in Preview or open it in Photoshop, but I need to use it as vector art.
-
Severe audio sync issues with DVR and RAI(Italian) channel.
Having severe audio sync issues with the Motorola QIP6416-2 while
watching RAI(Italian) channel. The audio is about 2 seconds behind
the video. This is the only channel it seems to happen with.
I just switched from Cablevision about a week ago and never had a
sync issue with their DVR with the same RAI channel or any channel.
I've tried changing hdmi cables with no success and I also went to
component video cables but the problem remains. Resetting the
box helps but within 15 minutes the sync issues return. Also,
a channel change and back helps briefly,
The only new piece of equipment in the mix is the Motorola DVR,
nothing else has changed. The DVR is connected directly to my
tv.
Any help is greatly appreciated.
MikeBeing a foreign channel, there may be something screwy with the framerate (PAL conversion?). I don't personally subscribe to any foreign languages channels and I doubt too many on this forum do either, so you may have trouble finding someone to replicate the problem on their end here.
-
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name. -
Syncing issues with 1st Gen. AppleTV
Hello, having syncing issues with my 1st generation ATV. It just keeps filling up until it is full regardless of the settings.
I have set it for only the last 5 unwatched for tv, movies, etc. and then I have changed every movie and tv show, etc to unwatched and it still puts everything on my AppleTV until it is full.
I have turned off syncing and then back on again. It fills back again. Yesterday I restored it to factory settings, did the updates, turned on syncing with the 'last 5 unwatched' settings again and same result. How the **** do you keep it from filling up with all of your media? I just can't figure it out. Must be missing something. Thanks in advance to anyone that can provide some insight on this. -DR
It does it with all versions of iTunes. I have the most current at the moment (11.0.1)Hello Winston, thanks. I have tried none selected and only one selected to try to narrow down what is happening. Same result.
As far as it being full I am looking at the multi-colored bar at the bottom that shows what is on it and what percentage of each (tv shows, audio, etc.). -
Sync issues with Thunderbolt drives
I'm checking to see if there are any sync issues with Mac Book Pros pre-Retina screen.
I have a (13-inch, Mid 2012) 2.5 GHz Intel Core i5 Mac Book Pro and I'm having some sync/latency issues with a number of audio interfaces, including a Symphony I/O and a MBox Mini 2.
I'm editing with Final Cut Pro 7. Mavericks OS 10.9.5. It's also happening with QT 10.3.
I'm using a Thunderbridge with the Symphony I/O and the USB port for the MBox Mini 2, but it has the same issue. I'm trying to get the registration number for my Pro App version of QT 7 because QT 10 is having some issues with a few arcane video formats. Is that possible? I can't retrieve the email because the computer that might have it is long dead, and buried in storage.
configuration:
Mac Book Pro to
G RAID Studio (via Thunderbolt) to
(Apogee Symphony I/O Thunderbridge)
1080P monitor (via Belkin Mini Display port to HDMI cable)
or MBox mini via USB
Both of these setups have sync issues. I have rigged a 1/8" stereo plug out of the headphone output and except for the occasional deafening buzz when you touch the adapter, it works okay, with no seeming sync issues.
Is this a thing? I understand that there is an issue with Symphony I/Os and certain Haswell Mac USB 3.0 ports.Hi,
Yes, I apologize. The video editor wasn't giving me any details. I did see the 44.1/48khz issue online. So will this happen only if both are mixed in the same timeline?
Thanks -
Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4
Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M. -
ITunes sync issues with Windows 7 64k Bit
I am beyond frustrated! I have attempted for the past 3 days straight to figure out why iTunes keeps having syncing issues with all my devices- Nano 8GB, Touch 8GB, iPhone 3G 8GB. When I first connected the devices for the first time iTunes froze up and I had to hard boot. I then had to "restore" the devices as they were messed up. Since then I have had syncing issues. It says it is syncing but then it stops and freezes before it is finished and is unresponsive requiring me to end the program. Then my computer does not recognize the iPod is connected so I have to reboot my computer and it all starts over again. I'm not trying to sync a million song, 600 songs less than 2Gig.
Called Apple, they had me uninstall iTunes 9 and reload it. That did not fix the problem. Called back and they told me to go to the Apple store and have them check my devices (they did not as they said they were pretty sure it was not iTunes or my devices) that it was probably Windows 7. MS points the finger at iTunes 9, Apple points the finger at Windows 7... all the while me (the customer) has no resolution. I don't care what the issue is... I would just like to figure out how to fix it (if it's my computer fine...I'll take it in to have it fixed) but I just cant get anyone to help figure out what/where the issue is.
I have tried many of the "tricks" that are posted when you google the issue.. ie reinstall drivers etc. The "Genius" at the Apple store searchd and found something that said it might be my motherboard needing an updated driver (I updated that and nothing changed).
Would REALLY appreciate it if someone could help
Thanks!Hi,
Does your PC have a NVIDIA USB Enhanced Host Controller Interface (EHCI) chipset?
If it does, you may want to try the Microsoft hotfix available here: http://support.microsoft.com/kb/976972.
If not, try the general USB troubleshooting tips in this article: http://support.apple.com/kb/TS1286
-Jason -
Sync issues with iPhone 6 Plus and iTunes
I'm having issues with syncing my iPhone and iTunes.
I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied). The longest this has occurred for is 2hrs. After this time I have stopped the sync and ejected my iPhone.
I had another issue with my phone when playing music. When going to play music, I was given the error message saying that the song could not be found. I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'. I found the song and could see that next to the song was a small what looked like dotted grey circle. After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song. I did this and this was when the issue occurred again.
I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again. This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone' tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play. All played ok.
I have read lots in the Apple forums about lost of difference reason this may be happening. Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it. My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
I all so had this issue with my old iPhone 4S. The problem occurred when running iOS 7 and 8 on the 4S. When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app. However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
I am in contact with Apple Care, but this is such a long process.
So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful. Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
I will update my post with any information provided by Apple Care as and when I get it.
Thanks for reading and thanks for your time.
Mark.Hi,
Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
Firstly I just want to updated my details about what version of Mavericks I'm running. I'm running 10.9.5 - I put the wrong version down in my original post.
So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices.
The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem. For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD, this was added and encoded with the version of iTunes that was running at the time of adding the music. So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version. However, due to the amount of music that I have, this is going to take a long time. When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone. This may just have been luck though at that time.
Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on. The only down side to this fix as far as I can see at the moment, is that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
Thank you all for your comments. -
Is anyone else having syncing issues with their Apple TV? I am trying to sync movies up that I just bought (StarTrek HD, IronMan HD) and the sync sits there with the progress bar moving all the way to the end but never actually finishes. Just sits there for hours! I don't know if it is because of the iTunes Extras or not, but it is getting very annoying.
I have read a lot of bad reviews of the Apple TV 3.0.1 update and I have to say, the my Apple TV is very sluggish and hangs a lot with this new revision. I am sure that is part of my issues syncing. All of this is sad because the product has such potential. To me, it is like an iPod for your TV.
I believe with this slow response times and issues Apply may be working on a hardware update to the device which is long overdue. Maybe the new software requires a faster processor and/or more memory which will be answered in the new hardware (one can only hope). We are just beta testing the new software. Apple: Listen to the people, we want bigger hard drive (500GB+) and reliability! We want it to run as smooth as an iPod. The moment you update the hardware, everyone with Apple TVs will buy a new one!Yes I have the same problem,, and it was with 2.4 version, I upgraded to 3.0.1 and still the status bar progresses all the way to end and just hangs there,,, BS is what it is,, If this is not fixed or goes unanswered I am just going to take my Apple TV back as I just purchased it yesterday. 12/17/09
-
Issues with importing from excel
I have been running into a several issues with importing from Excel.
First my configuration
I am running SQL Developer ver 1.5.5 Build MAIN-5969
I am on a Windows XP Professional Version 2002 with Service Pack 3
I am importing into an Oracle 10g database.
1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
This might be related,
I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
9. It would be nice if there was a completion message displayed and a cancel option while running.On point 3.
I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
The column's format is general. It displays as just 4 numbers.
When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
It determines the precision to be 5 on the column definition screen.
If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
If, I change the excel column to a TEXT column.
Excel still displays as 1111, 2345, etc
The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
Yet, when I get to the column definition screen it still sizes it as a 5
If I change it to a 4, I get the same error when verifying.
If I leave them alone as 5, then it processes just fine.
Maybe you are looking for
-
How to send mail to distribution list ?
Hi Everybody, Pls let me know how to send mail to distributed list??? Thanks & Regards, raju<b></b>
-
I have downloaded a BBC TV programme but it won't sync or play on my iPod
I have downloaded onto iTunes 11.04.4 a film broadcast by BBC Scotland called The Challenger. When I go to Sync my iPod I get a message that it won't Sync the programme because it is not in the correct format for my iPod. Also, when I go to try and
-
How can I add Canon Easy Web Print EX to the toolbar?
I just purchased a Canon Pixma Mx922 printer and i upgraded to windows 7. Today I re-installed Firefox. Is there any way to add the Canon Easy Web Print EX to the Firefox toolbar? I didn't see that option in the add-ons I could add. Thank you.
-
What are the FB 4.7 upgrade path options?
A few days ago using the product links I submitted an upgrade to 4.7 request based on my CS 5.5 Web Premium serial. It came back as denied because allegedly the seriial had been cancelled, which it is not - it is very active and shows in My Adobe. I
-
Hi, I have been playing around with initramfs and created my own (very, very basic) to learn more about how it works. I am using GRUB 2 and the MSI Wind U100 laptop. I have a few questions I haven't been able to found the answer to yet, maybe you cou