Sync job failed - Set up LMDB

Hello SAP gurus,
we're performing the initial configuration of the SOLMAN 7.1 for Enterprise Linux 5 and Oracle 11G.
After setting up the LMDB, the synch batch (SAP_LMDB_LDB_0000000001) executed every 10 minutes fails, and the message prompted in the log does not seem very helpful, neither have I find anything in the web:
Sync job failed with error: Source and target model vers. are lower than the r ***
Any idea? Could it be the server object name? I haven't requested any in http://service.sap.com/namespaces but use one I defined. Is that really necessary? My user does not have permits to launch that request.
Thanks. Raúl.

Hello,
Which SLD are you using to sync to LMDB.
Check the SLD version and SLD content version.
Follow the document:
Landscape Management Database (LMDB) - Setup Guide
Check this guide at:
https://websmp102.sap-ag.de/support
In Knowledge Exchange-> Ramp up knowledge transfer.
Go to SAP Solution Manager 7.1-> Setup and Operation
This should help.
Regards,
Sunny

Similar Messages

GRC AC 10.1: Authorizaion Sync Job Error

Hello Everyone,
I'm currently configuring my GRC 10.1 Access Control, I have just finished my common configuration tasks and ran the initial Authorization full sync job.
and am facing the below error message.
Authorization Sync
Starting authorization sync for connector SE3CLNT302 and language EN
Error in SE3CLNT302; Reason Error in RFC; 'No RFC authorization for function m
PFCG authorization sync failed with errors
Repository Object Sync
Program for Repository Profile Syncronization
Processing for connector SE3CLNT302
Error in RFC; 'No RFC authorization for function module /GRCPI/GR'
Profile sync failed with errors
Program for Repository Role Synchronization
Processing for connector SE3CLNT302
Error in RFC; 'No RFC authorization for function module /GRCPI/GR'
Role sync failed with errors
Program for Repository User Synchronization
Processing for connector SE3CLNT302
Error in RFC; 'No RFC authorization for function module /GRCPI/GR'
User sync failed with errors
Repository Object sync job failed with errors
Please check SLG1 for further details
I have double checked my connector settings and connection setting, everything seems fine. I checked the tables GRACCONNSTAT and GRFNCONNSCNLK, the tables are populated correctly. I checked to see the RFC ID passes the authorization test and connection test and the logical systems are populated in BD54, can anyone please tell what I'm missing here and why i'm facing this error message?

Hello Reddy
Kindly assign the role SAP_GRAC_ALL to the RFC user . This user can also be
assigned the profile SAP_ALL.
Best Regards,
Neeraj

RFC error while running sync job in AC 10

I have done all the configuration to add new SAP system via SPRO in GRC 10. Now I am trying to run the sync job for the first time, I am getting the below mssage. I checked the RFC desitinations, it looks fine.
Error in RFC; 'Function module "/GRCPI/GRIA_ROLE_GET_RANGES" not'
Error in RFC; 'Function module "/GRCPI/GRIA_ROLE_GET_RANGES" not'
Role sync failed with errors
Program for Repository User Synchronization
Error in RFC; 'Function module "/GRCPI/GRIA_USR_GET_RANGES" not f'
User sync failed with errors
Repository Object sync job failed with errors
Please check SLG1 for further details
I checked in SLG1 also, its displaying the same errors as listed above. I have some systems added earlier which are correctly configured and working fine. I tried to match the configuration with the new systems, and everything looks fine. Not sure why this error is coming.
Please someone can help.

Hello,
It seems to be a problem with the add-on in the back-en system, and a function module couldn't be found. Check the RFC connection (refer here for example GRC AC10 sync job error ) and make sure the add-on is properly installed.A simple check could be go to the back-end system, tx SE37 and check if the function modules exist.
Cheers,
Diego.

User, Role, Profile Synchronization Job Fails

Hi Gurus,
When I am scheduling a job the User, Role, and Profile Sync. job fails giving an error
"Cannot assign a java.lang.String object of length 53 to host variable 5 which has JDBC type VARCHAR(40)."
This happens when the synchronization happens with a portal system. We dont have a ruleset for the portal system, So if I put in a "*", it includes this system and results in the error, If I manually select all other system, it works fine. Is there any way to remove this error so that I can schedule the jobs without having to select every system manually.
Regards,
Chinmaya

Hi,
As per my knowledge, in the Portal system, you should perform only user sync. Roles/profile sync will not work since portal will have workset roles.
Please refer SAP Note 1168120, which may help you to understand the limitations
Hope this helps!!
Rgds,
Raghu
Edited by: Raghu Boddu on Nov 4, 2010 7:39 PM

Errors while running Sync Jobs in GRC 10

Dear Experts,
I am trying to configure RAR in GRC 10. I have all required config steps and now I am trying to run Sync Jobs and I am getting below errors.
Authorization Synch
Program for Authorization data Synchronization
Starting authorization sync for connector RC1 and language EN
Error in RC1; Reason Error in RFC; 'Function module "/GRCPI/GRIA_AUTH_G
PFCG authorization sync failed with errors
Repository Object Synch
Program for Repository Profile Syncronization
Processing for connector RC1
Error in RFC; 'Function module "/GRCPI/GRIA_PROF_GET_RANGES" not'
Profile sync failed with errors
Program for Repository Role Synchronization
Processing for connector RC1
Error in RFC; 'Function module "/GRCPI/GRIA_ROLE_GET_RANGES" not'
Role sync failed with errors
Program for Repository User Synchronization
Processing for connector RC1
Error in RFC; 'Function module "/GRCPI/GRIA_USR_GET_RANGES" not f'
User sync failed with errors
Repository Object sync job failed with errors
Please check SLG1 for further details
I appreciate your help.
Thanks,
Raj

Hi Raj,
I have a similar error for which I have put up a separate post, your input would be highly valuable.
My RFC connection works via the test in SM59 but when executing GRAC_AUTH_SYNC I get a simiar error to your above.
Please let me know what steps you took.
Best regards,
Paul

Setting up alarms when batch jobs fails

Hi,
I hv a requirement to setup alarms whenever a sap batch job fails, Can anyone help me in this regards.
Thank you very much in advance.
Kind Regards,
Ahmed.

check this document
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8065591d-ea33-2b10-a0af-f17c923874c8
see in page-2.
кu03B1ятu03B9к

Report Job failed when Bursting is used in BI Publisher 11.1.1.5

The Report Job failed when Bursting is used.
error message:
[INSTANCE_ID=aimedap1s.1347261753557] [OUTPUT_ID=1421][ReportProcessor]Error rendering documentoracle.xdo.servlet.scheduler.ProcessingException: [ReportProcessor]Error rendering document
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.renderReport(BurstingReportProcessor.java:455)
at oracle.xdo.enterpriseScheduler.bursting.BurstingReportProcessor.onMessage(BurstingReportProcessor.java:127)
at oracle.xdo.enterpriseScheduler.util.CheckpointEnabl
the reproduce steps :
1. Create a Bursting query in the Data Model
2. Create Report Job with the option
"Use Bursting Definition to Determine Output & Delivery Destination" enabled
3.Schedule the report Job
4. run the report and found the status of it is problem, the error message above can be found.
*Note:not all the report job failed when bursting is used, in step1 when set OUTPUT_FORMAT as PDF,HTML,RTF,PowerPoint 2007,
the report will be run successfully,but when set other OUTPUT_FORMAT that list in the following document, the report can not run successfully.
http://docs.oracle.com/cd/E21764_01/bi.1111/e18862/T527073T555155.htm
Adding Bursting Definitions>>Defining the Query for the Delivery XML
>>OUTPUT_FORMAT
Can anyone give some advice on how to troubleshooting it?
Looking forward for your reply
Regards

Hello vma.
I happened to find the solution on 11.1.1.3. With xdo-server.jar, you can use DataProcessor class.
For details and sample source code:
http://blog-koichiro.blogspot.com/2011/11/bi-publisher-java-apigenerate-pdf-with.html
* Not sure if it works on 11.1.1.5 though, I hope this gonna help you.

SQL Server Agent Job Failing on Job Step

Hi,
Firstly, apologies if this post has been made in the wrong group. Running SQL Server 2012. I'm attempting to add a SQL Server Agent Job which calls a stored procedure that sends a Database Mail message. The SQL Server and SQL Server Agent
both run under the NT AUTHORITY\NETWORK SERVICE account. The Database Mail service has been enabled, and a public profile created. When running the stored procedure manually, I receive no errors - everything runs as expected and I do receive an
email containing the expected information.
I've created the job, job step, job schedule, attached the schedule to the job, and assigned the job to server, all using T-SQL without error. I've also enabled the mail profile on the SQL Server Agent, and I know that part is working because when
the job fails, I get an email notification of the failure.
I've checked the command text in the job step and parsed it within the SQL Job Step Edit window to confirm, it shows as parsing correctly. However, when I manually run the job itself, I get the following:
Execution of job failed. See the history log for details.
I check the history log and it shows:
[474] Unable to refresh Database Mail profile Database Mail Profile. (reason: ) (Not a typo, the history log shows no reason)
[260] Unable to start mail session.
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
The command text on the failing job step is as follows:
DECLARE @date [varchar](10)
SET @date = CAST(GETDATE() AS [varchar](10))
EXEC [dbo].[GetExceptions]
@company = 'MyCompany',
@checkDate = @date
With regard to the date value being passed as varchar: This stored procedure is used to check for exceptions against multiple databases on this server (hence the company parameter) via dynamic SQL. I'd much prefer to use proper data typing but this
is the only way I could get it to work.
Does anyone have any suggestions on anything else I could check, or insights into why this is failing? Any help is greatly appreciated!
Best Regards
Brad

I am not sure if this really helps but I would do follow the below steps:
1. make sure sql server agent has database mail enabled(rigt click on server agent--properties--alert system--enable database mail and choose right profile.) and RESTART THE SQL SERVER AGENT.(i know you said it i working, but sometimes, restart the
sql server agent might fix)
2. check agent error log and check if any error messages.
3. run the command text you mentioned in sql server and see if it is working.(i know you said it is working but just to make sure).
4. make sure sql server agent service user has permissions to run database mail in msdb. check this https://msdn.microsoft.com/en-us/library/ms186358.aspx
5. Check the output from select * from msdb.dbo.sysmail_log and if it says anything
6.it does not look like the job log is getting truncated but to make sure, get the job step output to a text file.to do this, edit the job step and on the job step properties click on advanced, enter path to the output file. this will give the complete
output for the step.
Hope it Helps!!

I'm trying to sync my iPhone4s, but everytime iTunes tries to sync, I get a message "This iPhone cannot sync because the sync session failed to start." I've tried restoring my phone, and all my software is up to date. How do I fix it?!

I'm trying to sync my iPhone4s, but everytime iTunes tries to sync, I get a message "This iPhone cannot sync because the sync session failed to start." I've tried restoring my phone, and all my software is up to date. It won't sync any of my songs/apps back to my phone. Somebody please help!

Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

I am getting an error message that my Iphone could not be synced because the sync session failed to start

I am getting an error message when trying to sync to my PC that says "The Iphone could not be synced because the sync session failed to start" what setting is messed up?

The way I fixed this (though I'm using a iTouch 4G): disconnect your iPhone from the computer, shut down iTunes, then reset your iPhone by holding the Power/Sleep & Home buttons together for 10 seconds. Restart iTunes, then when your iPhone restarts, reconnect it to the computer, and everything should work fine

Background jobs failing with ABAP/4 processor: RFC_CONVERSION_FIELD

Hi Guru's,
Below are the backgroud jobs failing with runtime Error " ABAP/4 processor: RFC_CONVERSION_FIELD" in solution manager system (solution manager 3.0,SR2). Not sure why all these jobs failing with this dump on of sudden. i haven't made any changes to the system in the recent past.
BTC_CMS_COLLECTOR
SAP_APPLICATION_STAT_COLLECTOR
SESS_Y000001806_COLL_TRANS
ABAp Dump says that
Conversion error between two character sets
What happened?
Conversion error "ab_rfccon" from character set 4103 to character set 1100.
When executing a remote function call a conversion error occurred. This
occurred when receiving or sending the data. The conversion error can
only appear, when the data is transferred from a Unicode system to a
non-Unicode system.
Could some one please share some information if any one experienced the issue. Please note that all of our ECC systems are uni-code systems.
Thanks & Regards,
Vinod.

Hi Vinod
Just try to understand the purpose of these jobs and may be these Notes will help you
Note 814707 - Troubleshooting for RFC connections Unicode/non-Unicode
Note 647495 - RFC for Unicode ./. non-Unicode Connections
Note 1361970 - Conversion problems during RFC communication

Issue with Authorization sync job in GRC 10.1

Hi,
I am facing below issue while running the authorization sync job in 10.1 after importing the configuration data as part of migration from 5.3 to 10.1.
we have GRC server and plugin system on the same SP level 04.
Error:
Error in GRCAC101EC; Reason Error in RFC; 'Function module "/GRCPI/GRIA_AUTH_G
PFCG authorization sync failed with errors
Thr RFC connection is working fine and the connector settings are done in GRC. Also the RFC user has SAP_ALL.
Regards,
Giridhar

the sp seems a little low
have a look at Error in RFC; 'Function module "/GRCPI/GRIA_PROF_GET_RANGES" not'

Data Collection Jobs fail to run

Hello,
I have installed three servers with SQL Server 2012 Standard Edition, which should be identically installed and configured.
Part of the installation was setting up Data Collection which worked with out problems on two of the servers, but not on the last where 5 of the SQL Server Agent Jobs fails.
The jobs failing are:
collection_set_1_noncached_collect_and_upload
Message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_2_collection
Step 1 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_2_upload
Step 2 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_3_collection
Step 1 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
collection_set_3_upload
Step 2 message:
Executed as user: NT Service\SQLSERVERAGENT. The step did not generate any output. Process Exit Code -1073741515. The step failed.
When I try to execute one of the jobs, I get the following event in the System Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider
Name="Application Popup"
Guid="{47BFA2B7-BD54-4FAC-B70B-29021084CA8F}" />
<EventID>26</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated
SystemTime="2013-06-04T11:23:10.924129800Z" />
<EventRecordID>29716</EventRecordID>
<Correlation
/>
<Execution
ProcessID="396" ThreadID="1336" />
<Channel>System</Channel>
<Computer>myServer</Computer>
<Security
UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="Caption">DCEXEC.EXE - System Error</Data>
<Data Name="Message">The program can't start because SqlTDiagN.dll
is missing from your computer. Try reinstalling the program to fix this
problem.</Data>
</EventData>
</Event>
I have tried removing and reconfiguring the Data Collection two times using the stored procedure msdb.dbo.sp_syscollector_cleanup_collector and removing the underlying database.
Both times with the same result.
Below are the basic information about the setup of the server:
Does any one have any suggestions about what the problem could be and what the cure might be?
Best regards,
Michael Andy Poulsen

I tried running a repair on the SQL Server installation.
This solved the problem.
Only thing is that now I have to figure out the mening of these last lines in the log of the repair:
"The following warnings were encountered while configuring settings on your SQL Server. These resources / settings were missing or invalid so default values were used in recreating the missing resources. Please review to make sure they don’t require
further customization for your applications:
Service SID support has been enabled on the service.
Service SID support has been enabled on the service."
/Michael Andy Poulsen

MobileMe calendar sync consistently failing to keep things in sync

Hello,
I've been noticing for quite a while that in my setup, mobileme sync keeps failing to keep contacts in sync.
My setup is quite basic: 1 iphone, 1 mobileme account, 1 macbook pro.
The iphone is set to push contacts, calendars, and bookmarks.
The mac is set to sync automatically the changes.
Whenever I modify a contact card in my iphone, after a few days I notice the data has been reverted back to the original data. For example, I add a phone number to X contact. After a few days, the number has disappeared. Beejive uses the contacts to store the IM id of each contact: however contacts consistently lose this added data after a while.
I cannot tell exactly how long it takes, because I don't look for it, I jsut notice after a while.
I first noticed this almost 1 year ago when I bought my iphone 3g.. I was all happy taking pictures of my co workers to store in their contact cards.. after a few weeks I found a few of them who I was absolutely sure I had taken pictures of, but their contact cards were empty.
A few months ago I upgraded to a family pack, and just to be sure I created a new mobileme account and changed to that account at my mac and iphone.. but the problem keeps happening.
Any ideas? Am I the only one having this kind of paranormal mobileme sync?

Same here. We have two iphones (his and hers) which we sync to the desktops and with each other using MobileMe. Just this week we noticed it: every time my wife enters an event from her iphone it creates a new calendar that shows up in Mobile Me and on my iphone and contains not only the new entry but assorted other entries (not very many) that were formerly displayed in the default calendar. Oddly, while MobileMe and my iphone both show two calendars, my wife's iphone only shows one calendar that has ALL the entires on it. Very strange. Apple must have made some change recently that causes this. Hope they fix it soon.

ITunes sync is failing to start.

iTunes sync is failing to start. Everything is updated, my device is recognized, it just won't start. I got it to work earlier, but some of my music still wouldn't copy over. Now it won't start. Any ideas?

I'll post the same thing I posted in another thread; it might help you. Reinstall itunes again according to my post. Some of the information is irrelevant to your problem, but hey, i'm kinda feeling lazy and don't want to edit it. You'll get the idea. Here it is.....
"this is just a suggestion. If you reinstall itunes again, make sure you follow the directions in the support section of this site for uninstalling itunes and quicktime. Another thing they don't say in that article that I did when i had to uninstall itunes was to do a search. You know, pressing the start button and then "Search". Make sure when you do, click the search "All files and folders". Then set it to look in "Local Hard Drives (C:)" or "My Computer"; i'm not sure which search will pop up your itunes files. Try them both. And then type in the "all or part of the file name" box, itunes. After the search is done you should have a bunch of different itunes components in the results. Btw do the same for quicktime as a search. Make sure to DELETE every itunes and quicktime file there. If some of your music files happened to come up in the search, use commone sense. Get rid of every component so itunes and quicktime is completely erased from the system. Make sure that you do this after you've already restarted your computer once (according, to the uninstallation article). Then just empty your recycle bin, reboot your computer, and finally reinstall itunes. Good luck and ask me anything if you have some questions!!"
Let me know if it works or not. Again, good luck!
Remember, this is just a suggestion, it's up to you if you want to do it or not.

Sync job failed - Set up LMDB

Similar Messages

Maybe you are looking for