Sync Linked Clips in Premiere Elements 11, 10, and 9.0/9.0.1

Has anyone gotten the “Sync Linked Clips” feature to work in either Premiere Elements 9, 10, or 11 Windows? I am using Windows 7 64 bit, and that feature stops working for me when I go to versions 9.0/9.0.1, 10, and 11. It works great in Premiere Elements 8.0/8.0.1 on the same computer, using the same video/audio file. In contrast, the Premiere Elements Help PDF for all these versions describes this feature as a viable one.
http://help.adobe.com/en_US/premiereelements/using/WSB56835DB-2BE2-4ff9-85A3-83179E2326F8. html
For all, I can unlink video and audio holding down the computer main keyboard Alt key as I click/drag the audio file away from the video on the Timeline, with the Offset numbers clearly visible on the video and audio halfs. But in no way can I get the options of "Move Into Sync" and "Slip Into Sync" using the Offset numbers as described in the Adobe documentation or otherwise.
Thanks for any observations on use of this feature.
ATR

Several months ago, I created this thread to ask for information on why this Premiere Elements Sync Linked Clips feature has not worked since the days of Premiere Elements 8.0/8.0.1, in spite of the Adobe product information that says it works in the versions of the program later than 8.0/8.0.1.
As you can see, I have not gotten any responses to my question, and I have not seen the issue addressed elsewhere.
At this time, any chance someone has more information on what is happening or not happening with the Premiere Elements Sync Linked Clips situation.
Thanks.
ATR

Similar Messages

How can I raise the volume on a video clip in Premiere Elements 12?

I want to raise the volume on a video clip in Premiere Elements 12. Can anyone help?

jcomput
Always good to give the computer operating system involved in case any computer specific details needed to be included. But here is your
generalized yet specific answer for Premiere Elements 12 and increasing the volume of a video clip.
If you are in the Expert workspace...
a. click and drag upward the orange band that runs horizontally through the middle of the audio clip.
or
b. go to Adjust Tab/Adjustments Palette/ Volume Panel expanded on move the volume slide toward +6 dB.
0 db does not represent no sound. It represents the volume of the sound when it was recorded. 0 to +6 dB increases the sound above the recording level; 0 to infinity symbol decreases the sound below the recording level, finally to muted sound.
Please let us know if you are OK with the details above. My blog post on PE12: Audio Features may be useful to you.
ATR Premiere Elements Troubleshooting: PE12: Audio Features
Thank you.
ATR

Will Premiere Elements 9 edit and save changes to avchd losslessly?

Hi,
I want to buy a new premiere elements to replace my old one (vrsn 3), can I upgrade it still or is it too old?
Also, will the new premiere elements 9 edit and save changes to avchd files from Panasonic and Canon without losing any quality?
I came across 'provides native support for avchd'; what does it mean? Does it mean that I can edit and save avchd files with out losing quality?
Thanks,
H

For your several questions...
One... download and try the 30-day free trials
Two... read in the user guides
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
http://help.adobe.com/en_US/PremiereElements/8.0/Win/Using/index.html
P-Elements 9 http://help.adobe.com/en_US/premiereelements/using/index.html

Photoshop and premiere elements 12 Student and teacher edition:

Hi there,
i bought the student edition, entered everything recommended as name, etc, product code, sent a jpg file with school report and now i am waiting since three weeks for the serial number. What can i do?, photoshop and premiere elements 12 Student and teacher edition: i bought the student edition, entered everything recommended as name, etc, product code, sent a jpg file with school report and now i am waiting since three weeks for the serial number. What can i do?
greetings
luc

You might want to reconsider due to version 13 coming out a few weeks ago. MAybe you can change the purchase and exchange for version 13. In the meantime you could install the trial version and use those for 30 days while waiting for a serial number to appear.
Please see Return, cancel, or exchange an Adobe order -
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Get chat help with orders, refunds, and exchanges (non-CC)
http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )
PSE 13 Trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
PE 13 Trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements

I have Adobe Premiere Element 7 installed and I use that as to editing my video's. I am having such a hard time trying to lightening a dark video. I tried everything but nothing is working. Please help

I have Adobe Premiere Element 7 installed and I use that as to editing my video's. I am having such a hard time trying to lightening a dark video. I tried everything but nothing is working. Please help

saloumehdaghighi
Premiere Elements 7, on what computer operating system?
In Premiere Elements 7, there are various effects for lightening a dark video. After applying one of these lighting effects, have you been editing these applied effects in Edit Effects/Properties Palette after you apply them?
Video Effects
Adjust - Brightness and Contrast, Auto Levels....
Image Control Panel that is a default Properties Palette panel along with Motion and Opacity....for Brightness, Contrast, Hue, and Saturation.
ATR

Can I Upgrade Photoshop Elements 4.0, Premiere Elements 2.0 and DW CS3??

I have to upgrade my PC from Windows XT to Windows 8.1.
The computer checks say my existing Adobe programs are not compatible with Windows 8.1.
It is possible to upgrade Photoshop Elements 4.0, Premiere Elements 2.0 and Dreamweaver CS3?
Thanks

You can upgrade to Elements 12 from any previous version. Just purchase the version you require from either the Adobe website or a store of your choice as either individual programs or as a bundle.
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_photoshopcollection.html
http://www.adobe.com/products/premiere-elements.htm
The latest version of Dreamweaver is subscription only however with prices starting at $19.99 per month.
http://www.adobe.com/products/dreamweaver.html
A quick check on the internet however has indicated that Dreamweaver CS3 will run Windows 8.

Premiere Elements 7.0 and Photoshop Elements 7.0

I currently run Premiere Elements 4.0 and Photoshop Elements 3.0 on a Dell Pentium 4 Dimension 8300 with 3 gigs of Ram with Windows XP. I am considering upgrading to Premiere Elements 7.0 and Photoshop Elements 7.0. Will Premiere Elements 7.0 allow me to import my Premiere Elements 4.0 projects, or do I have to keep PE 4.0 on my computer? Also, will Photoshop Elements 7.0 import my Photoshop Elements 3.0 Collections (as created) or will I have to re-Tag my photos as well as organize them into Collections again? Thank you.

David,
>Also, will Photoshop Elements 7.0 import my Photoshop Elements 3.0 Collections (as created) or will I have to re-Tag my photos as well as organize them into Collections again?
In general I think that your PSE 3 tags and collections will be carried forward when your catalog is upgraded from PSE 3 to PSE 7. What were "Collections" in PSE 3 will become "Albums" in PSE 7.
Now it is very important that in the PSE 3 Organizer BEFORE your catalog is upgraded, you do
-- Reconnect All Missing Files
-- Catalog Recover
These commands are available from the File menu of the PSE 3 Organizer. They "clean up" your existing PSE 3 catalog and a clean catalog can avoid many potential problems during the upgrade process.
You did not ask about any "Creations" in PSE 3 and I do not think the Creations (Slide Show or Photo Book is an example of a creation) will carry forward from PSE 3 to PSE 7. So it is good if the info that you do need is the PSE 3 Collection rather than a PSE 3 Creation.
Here are some Adobe techdoc references about upgrade to PSE 7 Organizer
http://www.adobe.com/go/kb404990
http://www.adobe.com/go/kb404991
and in general I would scan the list of top issues techdocs at
http://www.adobe.com/support/photoshopelements/
The 2 I suggested above are on that list.
Be aware that the format and folder locations of the PSE catalog changed significantly between PSE 5 and PSE 6 (the 1st techdoc discuses this), so as you are migrating from PSE 3 to PSE 7 there will be some difference and how much you notice differences may depend on how deep you went in to PSE 3. The second techdoc, which discusses placing the PSE catalog in a non-standard folder location is one example of such a case. I say this not to scare you, but instead to make you aware of the potential for differences if there is initially a glitch in the upgrade process on your system.
Also, I strongly recommend that you give the PSE upgrade part of your question broader exposure by posting it over on the Photoshop Elements forum in the Technical Issues subforum at
http://www.adobeforums.com/webx/.3bbb4ab0/

Bought the Adobe Photoshop Elements 13 & Adobe Premiere Elements 13 Student and Teacher Edition accidentally.

Hi,
I accidentally bought the Adobe Photoshop Elements 13 & Adobe Premiere Elements 13 Student and Teacher Edition. And as I am not currently neither a teacher nor student I wont pay for a pruduct I can't use. So my question is, how do cancel that purchase?

See if this helps:
https://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

How to reduce re-rendering clips in Premiere Elements 12

Each time I restart a Project in Premiere Elements 12 the timeline indicates that I need to re-render the clips. Is there away to avoid excess rendering? Thanks.

don_
Your question is a long standing issue that seemed to have peaked around Premiere Elements 8.0/8.0.1 and seems to be independent of computer operating system, scratch disk locations, and QuickTime versions among other things. And Adobe has not come out with an explanation to date as far as I have ever seen.
But, let me make sure that I am interpreting your question correctly.
Are you saying that, after you save/close a project whose Timeline had been rendered for preview purposes, the re-opened project presents with an orange line over the Timeline content with the implication that you are looking at an unrendered Timeline? If that is the case, please read on.
I will dig out the unabridged version of what I have written about this in the past. But, for now, the abridged version.
1. Although the color indicator implies that the Timeline content is "unrendered", that is, you are not getting the best possible preview of what you are seeing in the Edit Mode monitor preview, the preview files that were originally generated are alive and well in their hard drive save location. Best guess is that the link between the preview files and the project are getting broken and are not repairable, short of rendering the Timeline content again if absolutely necessary for preview purposes.
2. In the re-opened project, rendering again to turn the orange line to green (best possible preview) can be done for the whole of the afflicted content or selectively (just segment) by setting the WorkArea Bar gray tabs to span just the area to be rendered.
3. My philosophy on this is to move on or re-render all or part if indicated. You have rendered the area previously and should know what that is going to look like...unless of course you make changes in the re-opened project.
This one has an unforgetable history going back several versions and apparently surfacing again in the present and still without the whys.
Please review and let us know if I have targeted you question.
Thanks.
ATR

Saving Individual Clips in Premiere Elements 11

Hi all -
In Adobe Premiere Elements 11, after cutting a large video clip into many smaller clips and then renaming them, how do you go about saving each individual clip, so I can easily edit them? I feel like I've looked everywhere and can't seem to figure it out.
Thanks!!
Jerry

Jerry
My first impression is cannot do. But, let me think about this.
Two major tasks...
a. Even if we could get the "grouped" video/audio into Project Assets with a copy/paste insert with ClipMate
then the next challenge would be
b. How do we get the Preview Window with the Set In and Set Out points to deal with a grouped rather than linked video audio. It will not do that when the grouped video and audio are on the Timeline....we could do non Preview Window trimming at the Timeline level
Think it worthwhile to download ClipMate to see how far we would get for this purpose of
a. generating segments of grouped video and audio?
b. pasting them into Project Assets where they would function as source media in or out of folders there?
I suspect this is going to go the old fashion way of exporting the segments to a file saved to the computer hard drive and then bringing those segments back into a grand project for the final export..
ClipMate, I believe, is a Windows only program. What computer operating system are you running your Premiere Elements 11 on?
More later.
ATR

Missing Visuals in video clips (Adobe Premiere Elements 10)

When I load up my video editting program (Adobe Premiere Elements 10) everything appears fine.
It's only when i try to load a video into the program that things go buggy.
The Video Clip appears on the timeline. The Audio works perfectly fine. However, the video, or image for that matter doesn't appear in the "viewing screen" (can't think of the right word
If I add a video effect to the clip (for example, Auto Color) then the picture becomes visible.
But, when I then render the clip, the picture disappears once again.
I'm no expert with computers or programs so i am pretty lost on what's wrong.
The last time I used the program (which was about a week before New Years Eve, 2013) it was working perfectly fine. I've used the program for the past year with little to no problems, so I am baffelled as to why this has happened now.
Any kind of help would be really appreseated
I even still have the original disc I bought when i first installed the program, so if i need to uninstall then reinstall the program it will be eailly done..
Thanks in advanse for you help

CreweOnTheSofa
Along with the Intel Graphics there is something called "NVIDIA GeForce GT 640M"
nothing more then that.
That is probably at the core of your problems, and we need to explore this. My take on this is that you have 2 things going on here.
1. There is an epidematic of display problems targeted specifically at the Premiere Elements 10 user whose computer uses a NIVIDIA video card. (You have Premiere Elements 10 and one of your video cards is NVIDIA GeForce GT 640M.)
Typically the drill is to have the version of the video card driver up to date. In this case, the fix is to roll back the driver version far enough not to have the display problem. Neither NVIDIA nor Adobe has not stepped forward to correct the situation.
Check out the following link to see what you are up against regarding the NVIDIA side of things.
http://forums.adobe.com/thread/1317675
2. On the other side of things, you have an integrated Intel Graphics card as well as the NVIDIA. There can be conflicts when two video cards/graphics cards are involved (independant of the NIVIDIA issue). Typically you see disabling of the integrated card, in your case the Intel Graphics. But, I am not sure where that would lead stability wise.
You could look at both areas and see if you have displays gains for one or the other. I would look at rolling back the NVIDIA first.
Please review, and then we can discuss this further.
Thanks.
ATR

Not all of the audio of my clip is showing up after adding a video clip to Premiere Elements 12. What do I do?

The first half of the clip, the video and audio are synced up normally. Then about halfway into it, the audio just disappears, the video continues to play like normal. If I play the clip in a different format (e.g. Windows Media Player) the audio works like normal.

daniels
On what computer operating system is your Premiere Elements 12 running? Have you updated 12 to the 12.1 Update using an opened project's Help Menu/Update?
What are the properties of your source video? What is the brand/model/settings for the camera that recorded the video? Does the camera record the
video with a variable rather than constant frame rate?
What have you (manually) or the program (automatically) set as the project preset to match the properties of the source media?
See readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
When you play back the video audio in the Edit area monitor, is there an orange line over that Timeline content?
Please review and consider, and then we can decide what next.
Thank you.
ATR

HELP!!!! Problems with saving/exporting split clips in Premiere Elements 13

I have Premiere Elements 13. I have a 2 hr mp4 file I have set up into 8 split clips and want to save each split clip as it's own mp4 file so I can import it into Adobe Presenter as video for each particular slide. I need very specific steps as how to accurately select each split clip and save it or export it as it's own mp4 file. I was given instructions that instructed me to add these gray bars around the clip I wanted to save/export but I am unable to identify how to get those gray bars to activate around the clip. When I save/export it is saving the entire 2 hr mp4 vs the individual clip.

hjrood
Please do not duplicate thread since it becomes confusing to the person asking the question as well as for those trying to respond.
I have already replied to your latest request for further details on setting the gray tabs of the Work Area Bar.
Please refer to your original thread and continue the discussion there.
Elements 13 - How do you save clips
Again, there are two requirements for selectively exporting a portion of the Timeline content
a. setting the gray tabs of the Work Area Bar
and
b. having a check mark next to the Share Work Area Bar Only option in the export area.
Details are in the original thread (with screenshot).
ATR
Add On...Typically a moderator will close or delete the duplicate thread.

Link for Adobe Premiere Elements 11 will not work. Any help please?

I bought my Premiere Elements package from another seller which gave me a link to download from Adobe. The product key thing is legit but every time I click on the file link for windows, my laptop comes up with this message: "The file archive of Adobe Premiere Elements 11 is missing. You need all parts in the same folder in order to extract Adpbe Premiere Elements 11. Please download all parts."
What does this mean??? Can anyone help me??? Please!

it means you only download of the 2 needed files. there are files 1 of 2, and 2 of 2. you need both. try again.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How do I add a transition between every clip in Premiere Elements 11?

Greetings -
Folks, I'm looking for a feature that even the cheesy old Windows Movie Maker used to have. I'm trying to figure out how to get Premiere Elements 11 to add a transition between every clip via some shortcut/quick means. I find it obnoxious and inefficient that I need to manually drag a transition between every clip. If I import 200 short clips that I took with my point and shoot camera, it'll take me over an hour alone just to put the transitions in place.
Is there any way to select a transition and have Premiere Elements add it between every clip? I've stumbled on the fact that you can click a transition and make it the "Default" but have not been able to figure out what that does for me.
Any help is appreciated.
Thank you.
Andy

CDR0920 wrote:
........... but the time was set by defaul as 0 seconds and I have not been able to change that. Tips???
I think trying Edit > Preferences > General > Video Default Transition Duration will fix it. Mine came with 30 frames set at installation.
Bill S

Sync Linked Clips in Premiere Elements 11, 10, and 9.0/9.0.1

Similar Messages

Maybe you are looking for